From: Mohammed Shafi Shajakhan <mohammed@qti.qualcomm.com>
To: <ath10k@lists.infradead.org>
Cc: Kalle Valo <kvalo@qca.qualcomm.com>, <kvalo@codeaurora.org>,
<mohammed@codeaurora.org>, <linux-wireless@vger.kernel.org>,
"Mohammed Shafi Shajakhan" <mohammed@qti.qualcomm.com>
Subject: [PATCH 2/2] ath10k: Enable parsing per station rx duration for 10.4
Date: Tue, 15 Mar 2016 20:00:50 +0530 [thread overview]
Message-ID: <1458052250-2529-3-git-send-email-mohammed@qca.qualcomm.com> (raw)
In-Reply-To: <1458052250-2529-1-git-send-email-mohammed@qca.qualcomm.com>
From: Mohammed Shafi Shajakhan <mohammed@qti.qualcomm.com>
Rx duration support for per station is part of extended peer
stats, enable provision to parse the same and provide backward
compatibility based on the 'stats_id' event
Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qti.qualcomm.com>
---
drivers/net/wireless/ath/ath10k/core.c | 19 ++++++++++++++++++-
drivers/net/wireless/ath/ath10k/wmi.c | 30 ++++++++++++++++++++++++------
drivers/net/wireless/ath/ath10k/wmi.h | 16 ++++++++++++++++
3 files changed, 58 insertions(+), 7 deletions(-)
diff --git a/drivers/net/wireless/ath/ath10k/core.c b/drivers/net/wireless/ath/ath10k/core.c
index 2389c07..5e37e61 100644
--- a/drivers/net/wireless/ath/ath10k/core.c
+++ b/drivers/net/wireless/ath/ath10k/core.c
@@ -1534,7 +1534,8 @@ static int ath10k_core_init_firmware_features(struct ath10k *ar)
ar->num_active_peers = TARGET_10_4_ACTIVE_PEERS;
ar->max_num_vdevs = TARGET_10_4_NUM_VDEVS;
ar->num_tids = TARGET_10_4_TGT_NUM_TIDS;
- ar->fw_stats_req_mask = WMI_STAT_PEER;
+ ar->fw_stats_req_mask = WMI_10_4_STAT_PEER |
+ WMI_10_4_STAT_PEER_EXTD;
ar->max_spatial_stream = ar->hw_params.max_spatial_stream;
if (test_bit(ATH10K_FW_FEATURE_PEER_FLOW_CONTROL,
@@ -1579,6 +1580,7 @@ static int ath10k_core_init_firmware_features(struct ath10k *ar)
int ath10k_core_start(struct ath10k *ar, enum ath10k_firmware_mode mode)
{
int status;
+ u32 val;
lockdep_assert_held(&ar->conf_mutex);
@@ -1699,6 +1701,21 @@ int ath10k_core_start(struct ath10k *ar, enum ath10k_firmware_mode mode)
ath10k_dbg(ar, ATH10K_DBG_BOOT, "firmware %s booted\n",
ar->hw->wiphy->fw_version);
+ if (test_bit(WMI_SERVICE_EXT_RES_CFG_SUPPORT, ar->wmi.svc_map)) {
+ val = 0;
+ if (ath10k_peer_stats_enabled(ar))
+ val = WMI_10_4_PEER_STATS;
+
+ status = ath10k_wmi_ext_resource_config(ar,
+ WMI_HOST_PLATFORM_HIGH_PERF, val);
+ if (status) {
+ ath10k_err(ar,
+ "failed to send ext resource cfg command : %d\n",
+ status);
+ goto err_hif_stop;
+ }
+ }
+
status = ath10k_wmi_cmd_init(ar);
if (status) {
ath10k_err(ar, "could not send WMI init command (%d)\n",
diff --git a/drivers/net/wireless/ath/ath10k/wmi.c b/drivers/net/wireless/ath/ath10k/wmi.c
index fcef9a0..7542ed8 100644
--- a/drivers/net/wireless/ath/ath10k/wmi.c
+++ b/drivers/net/wireless/ath/ath10k/wmi.c
@@ -2632,6 +2632,16 @@ void ath10k_wmi_pull_peer_stats(const struct wmi_peer_stats *src,
dst->peer_tx_rate = __le32_to_cpu(src->peer_tx_rate);
}
+static void
+ath10k_wmi_10_4_pull_peer_stats(const struct wmi_10_4_peer_stats *src,
+ struct ath10k_fw_stats_peer *dst)
+{
+ ether_addr_copy(dst->peer_macaddr, src->peer_macaddr.addr);
+ dst->peer_rssi = __le32_to_cpu(src->peer_rssi);
+ dst->peer_tx_rate = __le32_to_cpu(src->peer_tx_rate);
+ dst->peer_rx_rate = __le32_to_cpu(src->peer_rx_rate);
+}
+
static int ath10k_wmi_main_op_pull_fw_stats(struct ath10k *ar,
struct sk_buff *skb,
struct ath10k_fw_stats *stats)
@@ -2925,6 +2935,7 @@ static int ath10k_wmi_10_4_op_pull_fw_stats(struct ath10k *ar,
u32 num_pdev_ext_stats;
u32 num_vdev_stats;
u32 num_peer_stats;
+ u32 stats_id;
int i;
if (!skb_pull(skb, sizeof(*ev)))
@@ -2934,6 +2945,7 @@ static int ath10k_wmi_10_4_op_pull_fw_stats(struct ath10k *ar,
num_pdev_ext_stats = __le32_to_cpu(ev->num_pdev_ext_stats);
num_vdev_stats = __le32_to_cpu(ev->num_vdev_stats);
num_peer_stats = __le32_to_cpu(ev->num_peer_stats);
+ stats_id = __le32_to_cpu(ev->stats_id);
for (i = 0; i < num_pdev_stats; i++) {
const struct wmi_10_4_pdev_stats *src;
@@ -2973,22 +2985,28 @@ static int ath10k_wmi_10_4_op_pull_fw_stats(struct ath10k *ar,
/* fw doesn't implement vdev stats */
for (i = 0; i < num_peer_stats; i++) {
- const struct wmi_10_4_peer_stats *src;
+ const struct wmi_10_4_peer_extd_stats *src;
struct ath10k_fw_stats_peer *dst;
+ int stats_len;
+ bool extd_peer_stats = !!(stats_id & WMI_10_4_STAT_PEER_EXTD);
+
+ if (extd_peer_stats)
+ stats_len = sizeof(struct wmi_10_4_peer_extd_stats);
+ else
+ stats_len = sizeof(struct wmi_10_4_peer_stats);
src = (void *)skb->data;
- if (!skb_pull(skb, sizeof(*src)))
+ if (!skb_pull(skb, stats_len))
return -EPROTO;
dst = kzalloc(sizeof(*dst), GFP_ATOMIC);
if (!dst)
continue;
- ether_addr_copy(dst->peer_macaddr, src->peer_macaddr.addr);
- dst->peer_rssi = __le32_to_cpu(src->peer_rssi);
- dst->peer_tx_rate = __le32_to_cpu(src->peer_tx_rate);
- dst->peer_rx_rate = __le32_to_cpu(src->peer_rx_rate);
+ ath10k_wmi_10_4_pull_peer_stats(&src->common, dst);
/* FIXME: expose 10.4 specific values */
+ if (extd_peer_stats)
+ dst->rx_duration = src->rx_duration;
list_add_tail(&dst->list, &stats->peers);
}
diff --git a/drivers/net/wireless/ath/ath10k/wmi.h b/drivers/net/wireless/ath/ath10k/wmi.h
index 1d3e085..8626bb1 100644
--- a/drivers/net/wireless/ath/ath10k/wmi.h
+++ b/drivers/net/wireless/ath/ath10k/wmi.h
@@ -4104,6 +4104,13 @@ enum wmi_stats_id {
WMI_STAT_VDEV_RATE = BIT(5),
};
+enum wmi_10_4_stats_id {
+ WMI_10_4_STAT_PEER = BIT(0),
+ WMI_10_4_STAT_AP = BIT(1),
+ WMI_10_4_STAT_INST = BIT(2),
+ WMI_10_4_STAT_PEER_EXTD = BIT(3),
+};
+
struct wlan_inst_rssi_args {
__le16 cfg_retry_count;
__le16 retry_count;
@@ -4303,6 +4310,15 @@ struct wmi_10_4_peer_stats {
__le32 peer_rssi_changed;
} __packed;
+struct wmi_10_4_peer_extd_stats {
+ struct wmi_10_4_peer_stats common;
+ struct wmi_mac_addr peer_macaddr;
+ __le32 inactive_time;
+ __le32 peer_chain_rssi;
+ __le32 rx_duration;
+ __le32 reserved[10];
+} __packed;
+
struct wmi_10_2_pdev_ext_stats {
__le32 rx_rssi_comb;
__le32 rx_rssi[4];
--
1.7.9.5
WARNING: multiple messages have this Message-ID (diff)
From: Mohammed Shafi Shajakhan <mohammed@qti.qualcomm.com>
To: ath10k@lists.infradead.org
Cc: mohammed@codeaurora.org, Kalle Valo <kvalo@qca.qualcomm.com>,
linux-wireless@vger.kernel.org, kvalo@codeaurora.org,
Mohammed Shafi Shajakhan <mohammed@qti.qualcomm.com>
Subject: [PATCH 2/2] ath10k: Enable parsing per station rx duration for 10.4
Date: Tue, 15 Mar 2016 20:00:50 +0530 [thread overview]
Message-ID: <1458052250-2529-3-git-send-email-mohammed@qca.qualcomm.com> (raw)
In-Reply-To: <1458052250-2529-1-git-send-email-mohammed@qca.qualcomm.com>
From: Mohammed Shafi Shajakhan <mohammed@qti.qualcomm.com>
Rx duration support for per station is part of extended peer
stats, enable provision to parse the same and provide backward
compatibility based on the 'stats_id' event
Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qti.qualcomm.com>
---
drivers/net/wireless/ath/ath10k/core.c | 19 ++++++++++++++++++-
drivers/net/wireless/ath/ath10k/wmi.c | 30 ++++++++++++++++++++++++------
drivers/net/wireless/ath/ath10k/wmi.h | 16 ++++++++++++++++
3 files changed, 58 insertions(+), 7 deletions(-)
diff --git a/drivers/net/wireless/ath/ath10k/core.c b/drivers/net/wireless/ath/ath10k/core.c
index 2389c07..5e37e61 100644
--- a/drivers/net/wireless/ath/ath10k/core.c
+++ b/drivers/net/wireless/ath/ath10k/core.c
@@ -1534,7 +1534,8 @@ static int ath10k_core_init_firmware_features(struct ath10k *ar)
ar->num_active_peers = TARGET_10_4_ACTIVE_PEERS;
ar->max_num_vdevs = TARGET_10_4_NUM_VDEVS;
ar->num_tids = TARGET_10_4_TGT_NUM_TIDS;
- ar->fw_stats_req_mask = WMI_STAT_PEER;
+ ar->fw_stats_req_mask = WMI_10_4_STAT_PEER |
+ WMI_10_4_STAT_PEER_EXTD;
ar->max_spatial_stream = ar->hw_params.max_spatial_stream;
if (test_bit(ATH10K_FW_FEATURE_PEER_FLOW_CONTROL,
@@ -1579,6 +1580,7 @@ static int ath10k_core_init_firmware_features(struct ath10k *ar)
int ath10k_core_start(struct ath10k *ar, enum ath10k_firmware_mode mode)
{
int status;
+ u32 val;
lockdep_assert_held(&ar->conf_mutex);
@@ -1699,6 +1701,21 @@ int ath10k_core_start(struct ath10k *ar, enum ath10k_firmware_mode mode)
ath10k_dbg(ar, ATH10K_DBG_BOOT, "firmware %s booted\n",
ar->hw->wiphy->fw_version);
+ if (test_bit(WMI_SERVICE_EXT_RES_CFG_SUPPORT, ar->wmi.svc_map)) {
+ val = 0;
+ if (ath10k_peer_stats_enabled(ar))
+ val = WMI_10_4_PEER_STATS;
+
+ status = ath10k_wmi_ext_resource_config(ar,
+ WMI_HOST_PLATFORM_HIGH_PERF, val);
+ if (status) {
+ ath10k_err(ar,
+ "failed to send ext resource cfg command : %d\n",
+ status);
+ goto err_hif_stop;
+ }
+ }
+
status = ath10k_wmi_cmd_init(ar);
if (status) {
ath10k_err(ar, "could not send WMI init command (%d)\n",
diff --git a/drivers/net/wireless/ath/ath10k/wmi.c b/drivers/net/wireless/ath/ath10k/wmi.c
index fcef9a0..7542ed8 100644
--- a/drivers/net/wireless/ath/ath10k/wmi.c
+++ b/drivers/net/wireless/ath/ath10k/wmi.c
@@ -2632,6 +2632,16 @@ void ath10k_wmi_pull_peer_stats(const struct wmi_peer_stats *src,
dst->peer_tx_rate = __le32_to_cpu(src->peer_tx_rate);
}
+static void
+ath10k_wmi_10_4_pull_peer_stats(const struct wmi_10_4_peer_stats *src,
+ struct ath10k_fw_stats_peer *dst)
+{
+ ether_addr_copy(dst->peer_macaddr, src->peer_macaddr.addr);
+ dst->peer_rssi = __le32_to_cpu(src->peer_rssi);
+ dst->peer_tx_rate = __le32_to_cpu(src->peer_tx_rate);
+ dst->peer_rx_rate = __le32_to_cpu(src->peer_rx_rate);
+}
+
static int ath10k_wmi_main_op_pull_fw_stats(struct ath10k *ar,
struct sk_buff *skb,
struct ath10k_fw_stats *stats)
@@ -2925,6 +2935,7 @@ static int ath10k_wmi_10_4_op_pull_fw_stats(struct ath10k *ar,
u32 num_pdev_ext_stats;
u32 num_vdev_stats;
u32 num_peer_stats;
+ u32 stats_id;
int i;
if (!skb_pull(skb, sizeof(*ev)))
@@ -2934,6 +2945,7 @@ static int ath10k_wmi_10_4_op_pull_fw_stats(struct ath10k *ar,
num_pdev_ext_stats = __le32_to_cpu(ev->num_pdev_ext_stats);
num_vdev_stats = __le32_to_cpu(ev->num_vdev_stats);
num_peer_stats = __le32_to_cpu(ev->num_peer_stats);
+ stats_id = __le32_to_cpu(ev->stats_id);
for (i = 0; i < num_pdev_stats; i++) {
const struct wmi_10_4_pdev_stats *src;
@@ -2973,22 +2985,28 @@ static int ath10k_wmi_10_4_op_pull_fw_stats(struct ath10k *ar,
/* fw doesn't implement vdev stats */
for (i = 0; i < num_peer_stats; i++) {
- const struct wmi_10_4_peer_stats *src;
+ const struct wmi_10_4_peer_extd_stats *src;
struct ath10k_fw_stats_peer *dst;
+ int stats_len;
+ bool extd_peer_stats = !!(stats_id & WMI_10_4_STAT_PEER_EXTD);
+
+ if (extd_peer_stats)
+ stats_len = sizeof(struct wmi_10_4_peer_extd_stats);
+ else
+ stats_len = sizeof(struct wmi_10_4_peer_stats);
src = (void *)skb->data;
- if (!skb_pull(skb, sizeof(*src)))
+ if (!skb_pull(skb, stats_len))
return -EPROTO;
dst = kzalloc(sizeof(*dst), GFP_ATOMIC);
if (!dst)
continue;
- ether_addr_copy(dst->peer_macaddr, src->peer_macaddr.addr);
- dst->peer_rssi = __le32_to_cpu(src->peer_rssi);
- dst->peer_tx_rate = __le32_to_cpu(src->peer_tx_rate);
- dst->peer_rx_rate = __le32_to_cpu(src->peer_rx_rate);
+ ath10k_wmi_10_4_pull_peer_stats(&src->common, dst);
/* FIXME: expose 10.4 specific values */
+ if (extd_peer_stats)
+ dst->rx_duration = src->rx_duration;
list_add_tail(&dst->list, &stats->peers);
}
diff --git a/drivers/net/wireless/ath/ath10k/wmi.h b/drivers/net/wireless/ath/ath10k/wmi.h
index 1d3e085..8626bb1 100644
--- a/drivers/net/wireless/ath/ath10k/wmi.h
+++ b/drivers/net/wireless/ath/ath10k/wmi.h
@@ -4104,6 +4104,13 @@ enum wmi_stats_id {
WMI_STAT_VDEV_RATE = BIT(5),
};
+enum wmi_10_4_stats_id {
+ WMI_10_4_STAT_PEER = BIT(0),
+ WMI_10_4_STAT_AP = BIT(1),
+ WMI_10_4_STAT_INST = BIT(2),
+ WMI_10_4_STAT_PEER_EXTD = BIT(3),
+};
+
struct wlan_inst_rssi_args {
__le16 cfg_retry_count;
__le16 retry_count;
@@ -4303,6 +4310,15 @@ struct wmi_10_4_peer_stats {
__le32 peer_rssi_changed;
} __packed;
+struct wmi_10_4_peer_extd_stats {
+ struct wmi_10_4_peer_stats common;
+ struct wmi_mac_addr peer_macaddr;
+ __le32 inactive_time;
+ __le32 peer_chain_rssi;
+ __le32 rx_duration;
+ __le32 reserved[10];
+} __packed;
+
struct wmi_10_2_pdev_ext_stats {
__le32 rx_rssi_comb;
__le32 rx_rssi[4];
--
1.7.9.5
_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k
next prev parent reply other threads:[~2016-03-15 14:31 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-03-15 14:30 [PATCH 0/2] Parsing per station rx duration for 10.4 Mohammed Shafi Shajakhan
2016-03-15 14:30 ` Mohammed Shafi Shajakhan
2016-03-15 14:30 ` [PATCH 1/2] ath10k: Introduce Extended Resource Config support " Mohammed Shafi Shajakhan
2016-03-15 14:30 ` Mohammed Shafi Shajakhan
2016-03-16 10:21 ` Valo, Kalle
2016-03-16 10:21 ` Valo, Kalle
2016-03-16 11:16 ` Mohammed Shafi Shajakhan
2016-03-16 11:16 ` Mohammed Shafi Shajakhan
2016-03-15 14:30 ` Mohammed Shafi Shajakhan [this message]
2016-03-15 14:30 ` [PATCH 2/2] ath10k: Enable parsing per station rx duration " Mohammed Shafi Shajakhan
2016-03-16 10:22 ` Valo, Kalle
2016-03-16 10:22 ` Valo, Kalle
2016-03-16 11:19 ` Mohammed Shafi Shajakhan
2016-03-16 11:19 ` Mohammed Shafi Shajakhan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1458052250-2529-3-git-send-email-mohammed@qca.qualcomm.com \
--to=mohammed@qti.qualcomm.com \
--cc=ath10k@lists.infradead.org \
--cc=kvalo@codeaurora.org \
--cc=kvalo@qca.qualcomm.com \
--cc=linux-wireless@vger.kernel.org \
--cc=mohammed@codeaurora.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.