All of lore.kernel.org
 help / color / mirror / Atom feed
From: Mohammed Shafi Shajakhan <mohammed@codeaurora.org>
To: "Valo, Kalle" <kvalo@qca.qualcomm.com>
Cc: "Shajakhan,
	Mohammed Shafi (Mohammed Shafi)" <mohammed@qti.qualcomm.com>,
	"ath10k@lists.infradead.org" <ath10k@lists.infradead.org>,
	"linux-wireless@vger.kernel.org" <linux-wireless@vger.kernel.org>,
	Raja Mani <rmani@qti.qualcomm.com>
Subject: Re: [PATCH 1/2] ath10k: Introduce Extended Resource Config support for 10.4
Date: Wed, 16 Mar 2016 16:46:37 +0530	[thread overview]
Message-ID: <20160316111637.GA5213@atheros-ThinkPad-T61> (raw)
In-Reply-To: <87h9g6lo4y.fsf@kamboji.qca.qualcomm.com>

Hi Kalle,

On Wed, Mar 16, 2016 at 10:21:10AM +0000, Valo, Kalle wrote:
> Mohammed Shafi Shajakhan <mohammed@qti.qualcomm.com> writes:
> 
> > From: Raja Mani <rmani@qti.qualcomm.com>
> >
> > Add API support for Extended Resource Configuration for 10.4. This
> > is useful to enable new features like Peer Stats, LTEU etc if the
> > firmware advertises support for the service. This is also done to
> > provide backward compatibility with older firmware. Also for clarity
> > send default host platform type as 'WMI_HOST_PLATFORM_HIGH_PERF',
> > though this should not make any difference in functionality
> >
> > Signed-off-by: Raja Mani <rmani@qti.qualcomm.com>
> > Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qti.qualcomm.com>
> 
> [...]
> 
> > @@ -2665,7 +2666,32 @@ struct wmi_resource_config_10_4 {
> >  	 * 0  - This is not qwrap
> >  	 */
> >  	__le32 qwrap_config;
> > -} __packed;
> > +} __packed
> 
> This doesn't compile:

[shafi] Very sorry, made that error while rebasing one of the review comments
:-( Will avoid this in future, once again apologies 

> 
> In file included from drivers/net/wireless/ath/ath10k/core.h:32:0,
>                  from drivers/net/wireless/ath/ath10k/htt.c:22:
> drivers/net/wireless/ath/ath10k/wmi.h:2680:1: error: expected ';',
>                  identifier or '(' before 'enum'
> make[1]: *** [drivers/net/wireless/ath/ath10k/htt.o] Error 1
> In file included from drivers/net/wireless/ath/ath10k/core.h:32:0,
>                  from drivers/net/wireless/ath/ath10k/debug.c:25:
> drivers/net/wireless/ath/ath10k/wmi.h:2680:1: error: expected ';',
>                  identifier or '(' before 'enum'

thanks,
shafi
> 

WARNING: multiple messages have this Message-ID (diff)
From: Mohammed Shafi Shajakhan <mohammed@codeaurora.org>
To: "Valo, Kalle" <kvalo@qca.qualcomm.com>
Cc: "linux-wireless@vger.kernel.org" <linux-wireless@vger.kernel.org>,
	Raja Mani <rmani@qti.qualcomm.com>,
	"ath10k@lists.infradead.org" <ath10k@lists.infradead.org>,
	"Shajakhan,
	Mohammed Shafi (Mohammed Shafi)" <mohammed@qti.qualcomm.com>
Subject: Re: [PATCH 1/2] ath10k: Introduce Extended Resource Config support for 10.4
Date: Wed, 16 Mar 2016 16:46:37 +0530	[thread overview]
Message-ID: <20160316111637.GA5213@atheros-ThinkPad-T61> (raw)
In-Reply-To: <87h9g6lo4y.fsf@kamboji.qca.qualcomm.com>

Hi Kalle,

On Wed, Mar 16, 2016 at 10:21:10AM +0000, Valo, Kalle wrote:
> Mohammed Shafi Shajakhan <mohammed@qti.qualcomm.com> writes:
> 
> > From: Raja Mani <rmani@qti.qualcomm.com>
> >
> > Add API support for Extended Resource Configuration for 10.4. This
> > is useful to enable new features like Peer Stats, LTEU etc if the
> > firmware advertises support for the service. This is also done to
> > provide backward compatibility with older firmware. Also for clarity
> > send default host platform type as 'WMI_HOST_PLATFORM_HIGH_PERF',
> > though this should not make any difference in functionality
> >
> > Signed-off-by: Raja Mani <rmani@qti.qualcomm.com>
> > Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qti.qualcomm.com>
> 
> [...]
> 
> > @@ -2665,7 +2666,32 @@ struct wmi_resource_config_10_4 {
> >  	 * 0  - This is not qwrap
> >  	 */
> >  	__le32 qwrap_config;
> > -} __packed;
> > +} __packed
> 
> This doesn't compile:

[shafi] Very sorry, made that error while rebasing one of the review comments
:-( Will avoid this in future, once again apologies 

> 
> In file included from drivers/net/wireless/ath/ath10k/core.h:32:0,
>                  from drivers/net/wireless/ath/ath10k/htt.c:22:
> drivers/net/wireless/ath/ath10k/wmi.h:2680:1: error: expected ';',
>                  identifier or '(' before 'enum'
> make[1]: *** [drivers/net/wireless/ath/ath10k/htt.o] Error 1
> In file included from drivers/net/wireless/ath/ath10k/core.h:32:0,
>                  from drivers/net/wireless/ath/ath10k/debug.c:25:
> drivers/net/wireless/ath/ath10k/wmi.h:2680:1: error: expected ';',
>                  identifier or '(' before 'enum'

thanks,
shafi
> 

_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k

  reply	other threads:[~2016-03-16 11:16 UTC|newest]

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-03-15 14:30 [PATCH 0/2] Parsing per station rx duration for 10.4 Mohammed Shafi Shajakhan
2016-03-15 14:30 ` Mohammed Shafi Shajakhan
2016-03-15 14:30 ` [PATCH 1/2] ath10k: Introduce Extended Resource Config support " Mohammed Shafi Shajakhan
2016-03-15 14:30   ` Mohammed Shafi Shajakhan
2016-03-16 10:21   ` Valo, Kalle
2016-03-16 10:21     ` Valo, Kalle
2016-03-16 11:16     ` Mohammed Shafi Shajakhan [this message]
2016-03-16 11:16       ` Mohammed Shafi Shajakhan
2016-03-15 14:30 ` [PATCH 2/2] ath10k: Enable parsing per station rx duration " Mohammed Shafi Shajakhan
2016-03-15 14:30   ` Mohammed Shafi Shajakhan
2016-03-16 10:22   ` Valo, Kalle
2016-03-16 10:22     ` Valo, Kalle
2016-03-16 11:19     ` Mohammed Shafi Shajakhan
2016-03-16 11:19       ` Mohammed Shafi Shajakhan

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20160316111637.GA5213@atheros-ThinkPad-T61 \
    --to=mohammed@codeaurora.org \
    --cc=ath10k@lists.infradead.org \
    --cc=kvalo@qca.qualcomm.com \
    --cc=linux-wireless@vger.kernel.org \
    --cc=mohammed@qti.qualcomm.com \
    --cc=rmani@qti.qualcomm.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.