From: Neil Armstrong <narmstrong@baylibre.com>
To: linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, sudeep.holla@arm.com
Cc: Neil Armstrong <narmstrong@baylibre.com>,
linux-amlogic@lists.infradead.org, khilman@baylibre.com,
heiko@sntech.de, wxt@rock-chips.com, frank.wang@rock-chips.com
Subject: [RFC PATCH v2 3/9] ARM64: dts: meson-gxbb: Add Meson MHU Node
Date: Tue, 21 Jun 2016 12:02:48 +0200 [thread overview]
Message-ID: <1466503374-28841-4-git-send-email-narmstrong@baylibre.com> (raw)
In-Reply-To: <1466503374-28841-1-git-send-email-narmstrong@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
index 806b903..77381d0 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
@@ -315,6 +315,14 @@
#address-cells = <2>;
#size-cells = <2>;
ranges = <0x0 0x0 0x0 0xc883c000 0x0 0x2000>;
+
+ mailbox: mailbox@400 {
+ compatible = "amlogic,meson-gxbb-mhu";
+ reg = <0 0x400 0 0x4c>;
+ interrupts = <0 209 IRQ_TYPE_EDGE_RISING>,
+ <0 210 IRQ_TYPE_EDGE_RISING>;
+ #mbox-cells = <1>;
+ };
};
apb: apb@d0000000 {
--
2.7.0
WARNING: multiple messages have this Message-ID (diff)
From: narmstrong@baylibre.com (Neil Armstrong)
To: linux-arm-kernel@lists.infradead.org
Subject: [RFC PATCH v2 3/9] ARM64: dts: meson-gxbb: Add Meson MHU Node
Date: Tue, 21 Jun 2016 12:02:48 +0200 [thread overview]
Message-ID: <1466503374-28841-4-git-send-email-narmstrong@baylibre.com> (raw)
In-Reply-To: <1466503374-28841-1-git-send-email-narmstrong@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
index 806b903..77381d0 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
@@ -315,6 +315,14 @@
#address-cells = <2>;
#size-cells = <2>;
ranges = <0x0 0x0 0x0 0xc883c000 0x0 0x2000>;
+
+ mailbox: mailbox at 400 {
+ compatible = "amlogic,meson-gxbb-mhu";
+ reg = <0 0x400 0 0x4c>;
+ interrupts = <0 209 IRQ_TYPE_EDGE_RISING>,
+ <0 210 IRQ_TYPE_EDGE_RISING>;
+ #mbox-cells = <1>;
+ };
};
apb: apb at d0000000 {
--
2.7.0
WARNING: multiple messages have this Message-ID (diff)
From: narmstrong@baylibre.com (Neil Armstrong)
To: linus-amlogic@lists.infradead.org
Subject: [RFC PATCH v2 3/9] ARM64: dts: meson-gxbb: Add Meson MHU Node
Date: Tue, 21 Jun 2016 12:02:48 +0200 [thread overview]
Message-ID: <1466503374-28841-4-git-send-email-narmstrong@baylibre.com> (raw)
In-Reply-To: <1466503374-28841-1-git-send-email-narmstrong@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
index 806b903..77381d0 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
@@ -315,6 +315,14 @@
#address-cells = <2>;
#size-cells = <2>;
ranges = <0x0 0x0 0x0 0xc883c000 0x0 0x2000>;
+
+ mailbox: mailbox at 400 {
+ compatible = "amlogic,meson-gxbb-mhu";
+ reg = <0 0x400 0 0x4c>;
+ interrupts = <0 209 IRQ_TYPE_EDGE_RISING>,
+ <0 210 IRQ_TYPE_EDGE_RISING>;
+ #mbox-cells = <1>;
+ };
};
apb: apb at d0000000 {
--
2.7.0
next prev parent reply other threads:[~2016-06-21 10:03 UTC|newest]
Thread overview: 75+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-06-21 10:02 [RFC PATCH v2 0/9] scpi: Add SCPI registry to handle legacy protocol Neil Armstrong
2016-06-21 10:02 ` Neil Armstrong
2016-06-21 10:02 ` Neil Armstrong
2016-06-21 10:02 ` [RFC PATCH v2 1/9] mailbox: Add Amlogic Meson Message-Handling-Unit Neil Armstrong
2016-06-21 10:02 ` Neil Armstrong
2016-06-21 10:02 ` Neil Armstrong
2016-06-22 4:31 ` Jassi Brar
2016-06-22 4:31 ` Jassi Brar
2016-06-22 4:31 ` Jassi Brar
2016-06-23 12:50 ` Neil Armstrong
2016-06-23 12:50 ` Neil Armstrong
2016-06-23 12:50 ` Neil Armstrong
2016-06-23 15:46 ` Neil Armstrong
2016-06-23 15:46 ` Neil Armstrong
2016-06-23 15:46 ` Neil Armstrong
2016-06-25 17:50 ` Jassi Brar
2016-06-25 17:50 ` Jassi Brar
2016-06-25 17:50 ` Jassi Brar
2016-06-28 14:00 ` Neil Armstrong
2016-06-28 14:00 ` Neil Armstrong
2016-06-28 14:00 ` Neil Armstrong
2016-06-28 15:06 ` Jassi Brar
2016-06-28 15:06 ` Jassi Brar
2016-06-28 15:06 ` Jassi Brar
2016-07-04 15:25 ` Jassi Brar
2016-07-04 15:25 ` Jassi Brar
2016-07-04 15:25 ` Jassi Brar
2016-07-04 15:38 ` Jassi Brar
2016-07-04 15:38 ` Jassi Brar
2016-07-04 15:38 ` Jassi Brar
2016-07-06 13:17 ` Neil Armstrong
2016-07-06 13:17 ` Neil Armstrong
2016-07-06 13:17 ` Neil Armstrong
2016-07-07 4:27 ` Jassi Brar
2016-07-07 4:27 ` Jassi Brar
2016-07-07 4:27 ` Jassi Brar
2016-06-21 10:02 ` [RFC PATCH v2 2/9] dt-bindings: mailbox: Add Amlogic Meson MHU Bindings Neil Armstrong
2016-06-21 10:02 ` Neil Armstrong
2016-06-21 10:02 ` Neil Armstrong
2016-06-21 10:02 ` Neil Armstrong [this message]
2016-06-21 10:02 ` [RFC PATCH v2 3/9] ARM64: dts: meson-gxbb: Add Meson MHU Node Neil Armstrong
2016-06-21 10:02 ` Neil Armstrong
2016-06-21 10:02 ` [RFC PATCH v2 4/9] firmware: Add a SCPI registry to handle multiple implementations Neil Armstrong
2016-06-21 10:02 ` Neil Armstrong
2016-06-21 10:02 ` Neil Armstrong
2016-06-21 10:02 ` [RFC PATCH v2 5/9] firmware: scpi: Switch arm_scpi to use new registry Neil Armstrong
2016-06-21 10:02 ` Neil Armstrong
2016-06-21 10:02 ` Neil Armstrong
2016-06-21 10:02 ` [RFC PATCH v2 6/9] firmware: Add legacy SCPI protocol driver Neil Armstrong
2016-06-21 10:02 ` Neil Armstrong
2016-06-21 10:02 ` Neil Armstrong
2016-06-30 10:53 ` Sudeep Holla
2016-06-30 10:53 ` Sudeep Holla
2016-06-30 10:53 ` Sudeep Holla
2016-07-19 9:17 ` Neil Armstrong
2016-07-19 9:17 ` Neil Armstrong
2016-07-19 9:17 ` Neil Armstrong
2016-06-21 10:02 ` [RFC PATCH v2 7/9] dt-bindings: arm: Update arm,scpi bindings with Meson GXBB SCPI Neil Armstrong
2016-06-21 10:02 ` [RFC PATCH v2 7/9] dt-bindings: arm: Update arm, scpi " Neil Armstrong
2016-06-21 10:02 ` Neil Armstrong
2016-06-21 10:02 ` [RFC PATCH v2 8/9] ARM64: dts: meson-gxbb: Add SRAM node Neil Armstrong
2016-06-21 10:02 ` Neil Armstrong
2016-06-21 10:02 ` Neil Armstrong
2016-06-21 10:02 ` [RFC PATCH v2 9/9] ARM64: dts: meson-gxbb: Add SCPI with cpufreq & sensors Nodes Neil Armstrong
2016-06-21 10:02 ` Neil Armstrong
2016-06-21 10:02 ` Neil Armstrong
2016-06-22 2:54 ` [RFC PATCH v2 0/9] scpi: Add SCPI registry to handle legacy protocol Frank Wang
2016-06-22 2:54 ` Frank Wang
2016-06-22 2:54 ` Frank Wang
2016-06-23 12:45 ` Neil Armstrong
2016-06-23 12:45 ` Neil Armstrong
2016-06-23 12:45 ` Neil Armstrong
2016-06-24 2:31 ` Frank Wang
2016-06-24 2:31 ` Frank Wang
2016-06-24 2:31 ` Frank Wang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1466503374-28841-4-git-send-email-narmstrong@baylibre.com \
--to=narmstrong@baylibre.com \
--cc=frank.wang@rock-chips.com \
--cc=heiko@sntech.de \
--cc=khilman@baylibre.com \
--cc=linux-amlogic@lists.infradead.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=sudeep.holla@arm.com \
--cc=wxt@rock-chips.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.