From: Yoshinori Sato <ysato@users.sourceforge.jp> To: linux-sh@vger.kernel.org, linux-kernel@vger.kernel.org Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Subject: [PATCH v5 00/22] sh: LANDISK and R2Dplus convert to device tree Date: Sun, 03 Jul 2016 16:46:20 +0000 [thread overview] Message-ID: <1467564402-2649-1-git-send-email-ysato@users.sourceforge.jp> (raw) SH get devicetree support. But it not working on existing H/W. IO-DATA HDL-U (aka landisk) currentry supported. This H/W like SH7751 evalution board. It's a best to use this as a change base H/W. RTS7751R2Dplus is QEMU-SH4 target. So easy trying. Changes V5 - added "#address-cells" before interrupt-map - remove interrupt-controller of landisk.dts and r2dplus.dts - Add ".suppress_bind_attrs" to pci driver. - some cleanup. Changes V4 - split board depend patch. - dts cleanup. Changes V3 - PCI driver update for v4.7. - New Clock driver. Unified PLL/Divider. - R2Dplus support. - Split DTS. - Some cleanup. Changes V2 - split DeviceTree suppoty update. - PCI driver update. - Some cleanup. Yoshinori Sato (22): sh: Add sh-specific early_init_dt_reserve_memory_arch sh: More early unflatten device tree sh: set preset_lpj sh: Use P1SEGADDR sh: command line passing chosen/bootargs in devicetree sh: FDT address save before bank change sh: Passing FDT address on zImage sh: Disable board specific code on device tree mode sh: Use GENERIC_IOMAP on device tree mode sh: Add board specific initialize of of-generic sh: SH7750/51 CPG Driver sh: Add PCI host bridge driver for SH7751 sh: irqchip: SH7751 IRQCHIP Driver sh: SH7751 core dtsi sh: Move common PCI stuff to arch/sh/kernel pci: pci_config_window move to linux/pci.h pci: PCI_HOST_GENERIC enable for SH sh: Add separate DTB build rule sh: IO-DATA HDL-U (a,k.a landisk) IRQCHIP driver sh: IO-DATA HDL-U (a,k.a landisk) DeviceTree sh: Renesas RTS7751R2Dplus (a,k.a R2Dplus) IRQCHIP Driver sh: Renesas RTS7751R2Dplus (a,k.a R2Dplus) DeviceTree .../bindings/clock/renesas,sh7750-cpg.txt | 25 ++ .../interrupt-controller/iodata-landisk.txt | 31 ++ .../interrupt-controller/renesas,sh7751-intc.txt | 25 ++ .../interrupt-controller/renesas-r2dplus.txt | 38 +++ .../devicetree/bindings/pci/sh7751-pci.txt | 37 +++ arch/sh/Kconfig | 6 +- arch/sh/Makefile | 9 + arch/sh/boards/Kconfig | 4 + arch/sh/boards/of-generic.c | 88 +++++- arch/sh/boot/compressed/head_32.S | 5 +- arch/sh/boot/dts/Makefile | 5 + arch/sh/boot/dts/include/dt-bindings | 1 + arch/sh/boot/dts/landisk.dts | 61 ++++ arch/sh/boot/dts/r2dplus.dts | 85 +++++ arch/sh/boot/dts/sh7751.dtsi | 83 +++++ arch/sh/drivers/Makefile | 2 + arch/sh/drivers/pci/Makefile | 2 - arch/sh/drivers/pci/common.c | 162 ---------- arch/sh/drivers/pci/pci.c | 320 ------------------- arch/sh/include/asm/io.h | 6 + arch/sh/kernel/Makefile | 2 + arch/sh/kernel/cpu/Makefile | 8 +- arch/sh/kernel/cpu/clock.c | 6 +- arch/sh/kernel/cpu/sh4/Makefile | 2 + arch/sh/kernel/head_32.S | 7 +- arch/sh/kernel/pci-common.c | 162 ++++++++++ arch/sh/kernel/pci.c | 342 ++++++++++++++++++++ arch/sh/kernel/setup.c | 15 +- drivers/clk/Kconfig | 1 + drivers/clk/Makefile | 3 +- drivers/clk/sh/Kconfig | 2 + drivers/clk/sh/Makefile | 1 + drivers/clk/sh/clk-sh7750cpg.c | 344 +++++++++++++++++++++ drivers/irqchip/Kconfig | 5 + drivers/irqchip/Makefile | 1 + drivers/irqchip/irq-io-landisk.c | 72 +++++ drivers/irqchip/irq-renesas-r2dplus.c | 88 ++++++ drivers/irqchip/irq-renesas-sh7751.c | 141 +++++++++ drivers/pci/ecam.h | 17 +- drivers/pci/host/Kconfig | 9 +- drivers/pci/host/Makefile | 1 + drivers/pci/host/pci-sh7751.c | 326 +++++++++++++++++++ include/dt-bindings/clock/renesas-sh7750.h | 26 ++ include/dt-bindings/interrupt-controller/sh_intc.h | 2 + include/linux/pci.h | 18 ++ 45 files changed, 2075 insertions(+), 521 deletions(-) create mode 100644 Documentation/devicetree/bindings/clock/renesas,sh7750-cpg.txt create mode 100644 Documentation/devicetree/bindings/interrupt-controller/iodata-landisk.txt create mode 100644 Documentation/devicetree/bindings/interrupt-controller/renesas,sh7751-intc.txt create mode 100644 Documentation/devicetree/bindings/interrupt-controller/renesas-r2dplus.txt create mode 100644 Documentation/devicetree/bindings/pci/sh7751-pci.txt create mode 120000 arch/sh/boot/dts/include/dt-bindings create mode 100644 arch/sh/boot/dts/landisk.dts create mode 100644 arch/sh/boot/dts/r2dplus.dts create mode 100644 arch/sh/boot/dts/sh7751.dtsi delete mode 100644 arch/sh/drivers/pci/common.c delete mode 100644 arch/sh/drivers/pci/pci.c create mode 100644 arch/sh/kernel/pci-common.c create mode 100644 arch/sh/kernel/pci.c create mode 100644 drivers/clk/sh/Kconfig create mode 100644 drivers/clk/sh/Makefile create mode 100644 drivers/clk/sh/clk-sh7750cpg.c create mode 100644 drivers/irqchip/irq-io-landisk.c create mode 100644 drivers/irqchip/irq-renesas-r2dplus.c create mode 100644 drivers/irqchip/irq-renesas-sh7751.c create mode 100644 drivers/pci/host/pci-sh7751.c create mode 100644 include/dt-bindings/clock/renesas-sh7750.h create mode 100644 include/dt-bindings/interrupt-controller/sh_intc.h -- 2.7.0
WARNING: multiple messages have this Message-ID (diff)
From: Yoshinori Sato <ysato@users.sourceforge.jp> To: linux-sh@vger.kernel.org, linux-kernel@vger.kernel.org Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Subject: [PATCH v5 00/22] sh: LANDISK and R2Dplus convert to device tree Date: Mon, 4 Jul 2016 01:46:20 +0900 [thread overview] Message-ID: <1467564402-2649-1-git-send-email-ysato@users.sourceforge.jp> (raw) SH get devicetree support. But it not working on existing H/W. IO-DATA HDL-U (aka landisk) currentry supported. This H/W like SH7751 evalution board. It's a best to use this as a change base H/W. RTS7751R2Dplus is QEMU-SH4 target. So easy trying. Changes V5 - added "#address-cells" before interrupt-map - remove interrupt-controller of landisk.dts and r2dplus.dts - Add ".suppress_bind_attrs" to pci driver. - some cleanup. Changes V4 - split board depend patch. - dts cleanup. Changes V3 - PCI driver update for v4.7. - New Clock driver. Unified PLL/Divider. - R2Dplus support. - Split DTS. - Some cleanup. Changes V2 - split DeviceTree suppoty update. - PCI driver update. - Some cleanup. Yoshinori Sato (22): sh: Add sh-specific early_init_dt_reserve_memory_arch sh: More early unflatten device tree sh: set preset_lpj sh: Use P1SEGADDR sh: command line passing chosen/bootargs in devicetree sh: FDT address save before bank change sh: Passing FDT address on zImage sh: Disable board specific code on device tree mode sh: Use GENERIC_IOMAP on device tree mode sh: Add board specific initialize of of-generic sh: SH7750/51 CPG Driver sh: Add PCI host bridge driver for SH7751 sh: irqchip: SH7751 IRQCHIP Driver sh: SH7751 core dtsi sh: Move common PCI stuff to arch/sh/kernel pci: pci_config_window move to linux/pci.h pci: PCI_HOST_GENERIC enable for SH sh: Add separate DTB build rule sh: IO-DATA HDL-U (a,k.a landisk) IRQCHIP driver sh: IO-DATA HDL-U (a,k.a landisk) DeviceTree sh: Renesas RTS7751R2Dplus (a,k.a R2Dplus) IRQCHIP Driver sh: Renesas RTS7751R2Dplus (a,k.a R2Dplus) DeviceTree .../bindings/clock/renesas,sh7750-cpg.txt | 25 ++ .../interrupt-controller/iodata-landisk.txt | 31 ++ .../interrupt-controller/renesas,sh7751-intc.txt | 25 ++ .../interrupt-controller/renesas-r2dplus.txt | 38 +++ .../devicetree/bindings/pci/sh7751-pci.txt | 37 +++ arch/sh/Kconfig | 6 +- arch/sh/Makefile | 9 + arch/sh/boards/Kconfig | 4 + arch/sh/boards/of-generic.c | 88 +++++- arch/sh/boot/compressed/head_32.S | 5 +- arch/sh/boot/dts/Makefile | 5 + arch/sh/boot/dts/include/dt-bindings | 1 + arch/sh/boot/dts/landisk.dts | 61 ++++ arch/sh/boot/dts/r2dplus.dts | 85 +++++ arch/sh/boot/dts/sh7751.dtsi | 83 +++++ arch/sh/drivers/Makefile | 2 + arch/sh/drivers/pci/Makefile | 2 - arch/sh/drivers/pci/common.c | 162 ---------- arch/sh/drivers/pci/pci.c | 320 ------------------- arch/sh/include/asm/io.h | 6 + arch/sh/kernel/Makefile | 2 + arch/sh/kernel/cpu/Makefile | 8 +- arch/sh/kernel/cpu/clock.c | 6 +- arch/sh/kernel/cpu/sh4/Makefile | 2 + arch/sh/kernel/head_32.S | 7 +- arch/sh/kernel/pci-common.c | 162 ++++++++++ arch/sh/kernel/pci.c | 342 ++++++++++++++++++++ arch/sh/kernel/setup.c | 15 +- drivers/clk/Kconfig | 1 + drivers/clk/Makefile | 3 +- drivers/clk/sh/Kconfig | 2 + drivers/clk/sh/Makefile | 1 + drivers/clk/sh/clk-sh7750cpg.c | 344 +++++++++++++++++++++ drivers/irqchip/Kconfig | 5 + drivers/irqchip/Makefile | 1 + drivers/irqchip/irq-io-landisk.c | 72 +++++ drivers/irqchip/irq-renesas-r2dplus.c | 88 ++++++ drivers/irqchip/irq-renesas-sh7751.c | 141 +++++++++ drivers/pci/ecam.h | 17 +- drivers/pci/host/Kconfig | 9 +- drivers/pci/host/Makefile | 1 + drivers/pci/host/pci-sh7751.c | 326 +++++++++++++++++++ include/dt-bindings/clock/renesas-sh7750.h | 26 ++ include/dt-bindings/interrupt-controller/sh_intc.h | 2 + include/linux/pci.h | 18 ++ 45 files changed, 2075 insertions(+), 521 deletions(-) create mode 100644 Documentation/devicetree/bindings/clock/renesas,sh7750-cpg.txt create mode 100644 Documentation/devicetree/bindings/interrupt-controller/iodata-landisk.txt create mode 100644 Documentation/devicetree/bindings/interrupt-controller/renesas,sh7751-intc.txt create mode 100644 Documentation/devicetree/bindings/interrupt-controller/renesas-r2dplus.txt create mode 100644 Documentation/devicetree/bindings/pci/sh7751-pci.txt create mode 120000 arch/sh/boot/dts/include/dt-bindings create mode 100644 arch/sh/boot/dts/landisk.dts create mode 100644 arch/sh/boot/dts/r2dplus.dts create mode 100644 arch/sh/boot/dts/sh7751.dtsi delete mode 100644 arch/sh/drivers/pci/common.c delete mode 100644 arch/sh/drivers/pci/pci.c create mode 100644 arch/sh/kernel/pci-common.c create mode 100644 arch/sh/kernel/pci.c create mode 100644 drivers/clk/sh/Kconfig create mode 100644 drivers/clk/sh/Makefile create mode 100644 drivers/clk/sh/clk-sh7750cpg.c create mode 100644 drivers/irqchip/irq-io-landisk.c create mode 100644 drivers/irqchip/irq-renesas-r2dplus.c create mode 100644 drivers/irqchip/irq-renesas-sh7751.c create mode 100644 drivers/pci/host/pci-sh7751.c create mode 100644 include/dt-bindings/clock/renesas-sh7750.h create mode 100644 include/dt-bindings/interrupt-controller/sh_intc.h -- 2.7.0
next reply other threads:[~2016-07-03 16:46 UTC|newest] Thread overview: 138+ messages / expand[flat|nested] mbox.gz Atom feed top 2016-07-03 16:46 Yoshinori Sato [this message] 2016-07-03 16:46 ` [PATCH v5 00/22] sh: LANDISK and R2Dplus convert to device tree Yoshinori Sato 2016-07-03 16:46 ` [PATCH v5 01/22] sh: Add sh-specific early_init_dt_reserve_memory_arch Yoshinori Sato 2016-07-03 16:46 ` Yoshinori Sato 2016-07-04 2:03 ` Rich Felker 2016-07-04 2:03 ` Rich Felker 2016-07-06 13:53 ` Yoshinori Sato 2016-07-06 13:53 ` Yoshinori Sato 2016-07-06 14:50 ` Rich Felker 2016-07-06 14:50 ` Rich Felker 2016-07-03 16:46 ` [PATCH v5 02/22] sh: More early unflatten device tree Yoshinori Sato 2016-07-03 16:46 ` Yoshinori Sato 2016-07-03 16:46 ` [PATCH v5 03/22] sh: set preset_lpj Yoshinori Sato 2016-07-03 16:46 ` Yoshinori Sato 2016-07-03 16:46 ` [PATCH v5 04/22] sh: Use P1SEGADDR Yoshinori Sato 2016-07-03 16:46 ` Yoshinori Sato 2016-07-04 1:48 ` Rich Felker 2016-07-04 1:48 ` Rich Felker 2016-07-06 14:11 ` Yoshinori Sato 2016-07-06 14:11 ` Yoshinori Sato 2016-07-06 14:53 ` Rich Felker 2016-07-06 14:53 ` Rich Felker 2016-07-03 16:46 ` [PATCH v5 05/22] sh: command line passing chosen/bootargs in devicetree Yoshinori Sato 2016-07-03 16:46 ` Yoshinori Sato 2016-07-03 16:46 ` [PATCH v5 06/22] sh: FDT address save before bank change Yoshinori Sato 2016-07-03 16:46 ` Yoshinori Sato 2016-07-03 16:46 ` [PATCH v5 07/22] sh: Passing FDT address on zImage Yoshinori Sato 2016-07-03 16:46 ` Yoshinori Sato 2016-07-03 16:46 ` [PATCH v5 08/22] sh: Disable board specific code on device tree mode Yoshinori Sato 2016-07-03 16:46 ` Yoshinori Sato 2016-07-03 16:46 ` [PATCH v5 09/22] sh: Use GENERIC_IOMAP " Yoshinori Sato 2016-07-03 16:46 ` Yoshinori Sato 2016-07-03 16:46 ` [PATCH v5 10/22] sh: Add board specific initialize of of-generic Yoshinori Sato 2016-07-03 16:46 ` Yoshinori Sato 2016-07-04 1:35 ` Rich Felker 2016-07-04 1:35 ` Rich Felker 2016-07-06 14:27 ` Yoshinori Sato 2016-07-06 14:27 ` Yoshinori Sato 2016-07-03 16:46 ` [PATCH v5 11/22] sh: SH7750/51 CPG Driver Yoshinori Sato 2016-07-03 16:46 ` Yoshinori Sato [not found] ` <1467564402-2649-1-git-send-email-ysato-Rn4VEauK+AKRv+LV9MX5uooqe+aC9MnS@public.gmane.org> 2016-07-03 16:46 ` [PATCH v6 12/22] sh: Add PCI host bridge driver for SH7751 Yoshinori Sato 2016-07-03 16:46 ` Yoshinori Sato 2016-07-03 16:46 ` Yoshinori Sato 2016-07-05 15:53 ` Rob Herring 2016-07-05 15:53 ` Rob Herring 2016-07-06 16:19 ` Yoshinori Sato 2016-07-06 16:19 ` Yoshinori Sato [not found] ` <1467564402-2649-13-git-send-email-ysato-Rn4VEauK+AKRv+LV9MX5uooqe+aC9MnS@public.gmane.org> 2016-07-22 22:59 ` Bjorn Helgaas 2016-07-22 22:59 ` Bjorn Helgaas 2016-07-22 22:59 ` Bjorn Helgaas 2016-07-03 16:46 ` [PATCH v5 13/22] sh: irqchip: SH7751 IRQCHIP Driver Yoshinori Sato 2016-07-03 16:46 ` Yoshinori Sato 2016-07-03 16:46 ` Yoshinori Sato 2016-07-03 16:46 ` [PATCH v5 14/22] sh: SH7751 core dtsi Yoshinori Sato 2016-07-03 16:46 ` Yoshinori Sato 2016-07-03 16:46 ` [PATCH v5 15/22] sh: Move common PCI stuff to arch/sh/kernel Yoshinori Sato 2016-07-03 16:46 ` Yoshinori Sato 2016-07-04 1:55 ` Rich Felker 2016-07-04 1:55 ` Rich Felker 2016-07-06 16:17 ` Yoshinori Sato 2016-07-06 16:17 ` Yoshinori Sato 2016-07-03 16:46 ` [PATCH v5 16/22] pci: pci_config_window move to linux/pci.h Yoshinori Sato 2016-07-03 16:46 ` Yoshinori Sato 2016-07-03 16:46 ` [PATCH v5 17/22] pci: PCI_HOST_GENERIC enable for SH Yoshinori Sato 2016-07-03 16:46 ` Yoshinori Sato 2016-07-03 16:46 ` [PATCH v5 18/22] sh: Add separate DTB build rule Yoshinori Sato 2016-07-03 16:46 ` Yoshinori Sato 2016-07-03 16:46 ` [PATCH v5 19/22] sh: IO-DATA HDL-U (a.k.a landisk) IRQCHIP driver Yoshinori Sato 2016-07-03 16:46 ` Yoshinori Sato 2016-07-11 14:02 ` Rob Herring 2016-07-11 14:02 ` Rob Herring 2016-07-03 16:46 ` [PATCH v5 20/22] sh: IO-DATA HDL-U (a.k.a landisk) DeviceTree Yoshinori Sato 2016-07-03 16:46 ` Yoshinori Sato 2016-07-03 19:00 ` Sergei Shtylyov 2016-07-03 19:00 ` Sergei Shtylyov 2016-07-06 16:18 ` Yoshinori Sato 2016-07-06 16:18 ` Yoshinori Sato 2016-07-03 16:46 ` [PATCH v5 21/22] sh: Renesas RTS7751R2Dplus (a.k.a R2Dplus) IRQCHIP Driver Yoshinori Sato 2016-07-03 16:46 ` Yoshinori Sato 2016-07-03 16:46 ` [PATCH v5 22/22] sh: Renesas RTS7751R2Dplus (a,k.a R2Dplus) DeviceTree Yoshinori Sato 2016-07-03 16:46 ` Yoshinori Sato 2017-11-17 10:37 ` [PATCH v5 00/22] sh: LANDISK and R2Dplus convert to device tree John Paul Adrian Glaubitz 2017-11-17 10:37 ` John Paul Adrian Glaubitz 2017-11-17 17:39 ` [J-core] " Rob Landley 2017-11-17 17:39 ` Rob Landley 2017-11-17 17:49 ` John Paul Adrian Glaubitz 2017-11-17 17:49 ` John Paul Adrian Glaubitz 2017-11-17 19:17 ` Rich Felker 2017-11-17 19:17 ` Rich Felker 2017-11-17 19:54 ` John Paul Adrian Glaubitz 2018-01-05 21:28 ` Rich Felker 2018-01-05 21:28 ` Rich Felker 2018-01-05 21:47 ` John Paul Adrian Glaubitz 2018-01-05 21:47 ` John Paul Adrian Glaubitz 2018-01-05 22:00 ` Rich Felker 2018-01-05 22:00 ` Rich Felker 2018-01-05 22:10 ` John Paul Adrian Glaubitz 2018-01-05 22:10 ` John Paul Adrian Glaubitz 2018-05-03 1:37 ` Rich Felker 2018-05-03 1:37 ` Rich Felker 2018-05-03 2:33 ` Rich Felker 2018-05-03 2:33 ` Rich Felker 2018-05-03 10:07 ` John Paul Adrian Glaubitz 2018-05-03 10:07 ` John Paul Adrian Glaubitz 2018-05-03 15:41 ` Rich Felker 2018-05-03 15:41 ` Rich Felker 2018-05-07 1:40 ` Yoshinori Sato 2018-05-07 1:40 ` Yoshinori Sato 2018-05-07 11:00 ` John Paul Adrian Glaubitz 2018-05-07 11:00 ` John Paul Adrian Glaubitz 2018-05-07 13:40 ` Rob Landley 2018-05-07 13:40 ` Rob Landley 2018-05-07 13:50 ` John Paul Adrian Glaubitz 2018-05-07 13:50 ` John Paul Adrian Glaubitz 2018-05-07 14:05 ` Geert Uytterhoeven 2018-05-07 14:05 ` Geert Uytterhoeven 2018-05-07 14:43 ` Rich Felker 2018-05-07 14:43 ` Rich Felker 2018-05-07 15:13 ` Rob Landley 2018-05-07 15:13 ` Rob Landley 2018-05-07 15:52 ` Rich Felker 2018-05-07 15:52 ` Rich Felker 2018-05-07 14:45 ` Rich Felker 2018-05-07 14:45 ` Rich Felker 2018-05-07 15:28 ` Rob Landley 2018-05-07 15:28 ` Rob Landley 2018-05-07 15:55 ` Rich Felker 2018-05-07 15:55 ` Rich Felker 2018-05-07 20:01 ` Rob Landley 2018-05-07 20:01 ` Rob Landley 2018-05-08 12:05 ` Yoshinori Sato 2018-05-08 12:05 ` Yoshinori Sato 2018-05-15 1:41 ` Rich Felker 2018-05-15 1:41 ` Rich Felker 2018-05-16 6:42 ` Yoshinori Sato 2018-05-16 6:42 ` Yoshinori Sato 2018-05-18 7:51 ` John Paul Adrian Glaubitz 2018-05-18 7:51 ` John Paul Adrian Glaubitz
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1467564402-2649-1-git-send-email-ysato@users.sourceforge.jp \ --to=ysato@users.sourceforge.jp \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-sh@vger.kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.