From: Randy Li <ayaka-xPW3/0Ywev/iB9QmIjCX8w@public.gmane.org> To: devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org Cc: heiko-4mtYJXux2i+zQB+pC5nmwQ@public.gmane.org, linux-rockchip-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org, =linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, linux-I+IVW8TIWO2tmTQ+vhA3Yw@public.gmane.org, mark.rutland-5wv7dgnIgG8@public.gmane.org, robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org, Randy Li <ayaka-xPW3/0Ywev/iB9QmIjCX8w@public.gmane.org> Subject: [PATCH] ARM: dts: add rk3288-firefly-reload Date: Sun, 17 Jul 2016 23:38:57 +0800 [thread overview] Message-ID: <1468769937-23387-2-git-send-email-ayaka@soulik.info> (raw) In-Reply-To: <1468769937-23387-1-git-send-email-ayaka-xPW3/0Ywev/iB9QmIjCX8w@public.gmane.org> The Firefly RK3288 Reload is a combination Firefly rk3288 core board with the Reload baseboard. Add a dtsi for the Firefly rk3288 core which can be included into the dts for the various baseboards in the future and dts for Reload base board. Currently supported are serial console, wired networking, eMMC and SD storage, SPFIF, IR receiver, LEDs, SDIO wifi and USB. But only the OTG could work on the host mode now, the other USB host can't work now, additional patches are required. Signed-off-by: Randy Li <ayaka-xPW3/0Ywev/iB9QmIjCX8w@public.gmane.org> --- Documentation/devicetree/bindings/arm/rockchip.txt | 4 + arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/rk3288-firefly-reload-core.dtsi | 304 ++++++++++++++++++++ arch/arm/boot/dts/rk3288-firefly-reload.dts | 320 +++++++++++++++++++++ 4 files changed, 629 insertions(+) create mode 100644 arch/arm/boot/dts/rk3288-firefly-reload-core.dtsi create mode 100644 arch/arm/boot/dts/rk3288-firefly-reload.dts diff --git a/Documentation/devicetree/bindings/arm/rockchip.txt b/Documentation/devicetree/bindings/arm/rockchip.txt index 715d960..3380212c 100644 --- a/Documentation/devicetree/bindings/arm/rockchip.txt +++ b/Documentation/devicetree/bindings/arm/rockchip.txt @@ -31,6 +31,10 @@ Rockchip platforms device tree bindings or - compatible = "firefly,firefly-rk3288-beta", "rockchip,rk3288"; +- Firefly Firefly-RK3288 Reload board: + Required root node properties: + - compatible = "firefly,firefly-rk3288-reload", "rockchip,rk3288"; + - ChipSPARK PopMetal-RK3288 board: Required root node properties: - compatible = "chipspark,popmetal-rk3288", "rockchip,rk3288"; diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 414b427..8173e77 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -606,6 +606,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += \ rk3288-evb-rk808.dtb \ rk3288-firefly-beta.dtb \ rk3288-firefly.dtb \ + rk3288-firefly-reload.dtb \ rk3288-miqi.dtb \ rk3288-popmetal.dtb \ rk3288-r89.dtb \ diff --git a/arch/arm/boot/dts/rk3288-firefly-reload-core.dtsi b/arch/arm/boot/dts/rk3288-firefly-reload-core.dtsi new file mode 100644 index 0000000..039ae16 --- /dev/null +++ b/arch/arm/boot/dts/rk3288-firefly-reload-core.dtsi @@ -0,0 +1,304 @@ +/* + * Device tree file for Firefly Rockchip RK3288 Core board + * Copyright (c) 2016 Randy Li <ayaka-xPW3/0Ywev/iB9QmIjCX8w@public.gmane.org> + * + * Licensed under GPLv2 or later. + */ + +#include <dt-bindings/input/input.h> +#include "rk3288.dtsi" + +/ { + memory { + device_type = "memory"; + reg = <0 0x80000000>; + }; + + dovdd_1v8: dovdd-1v8-regulator { + compatible = "regulator-fixed"; + regulator-name = "dovdd_1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vcc28_dvp>; + }; + + ext_gmac: external-gmac-clock { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <125000000>; + clock-output-names = "ext_gmac"; + }; + + io_domains: io-domains { + compatible = "rockchip,rk3288-io-voltage-domain"; + rockchip,grf = <&grf>; + + audio-supply = <&vcca_33>; + bb-supply = <&vcc_io>; + dvp-supply = <&dovdd_1v8>; + flash0-supply = <&vcc_flash>; + flash1-supply = <&vcc_lan>; + gpio30-supply = <&vcc_io>; + gpio1830-supply = <&vcc_io>; + lcdc-supply = <&vcc_io>; + sdcard-supply = <&vccio_sd>; + wifi-supply = <&vccio_wl>; + }; + + vbat_wl: vcc_sys: vsys-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc_sys"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + regulator-boot-on; + }; + + vcc_flash: flash-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc_flash"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vcc_io>; + }; + + vcc_5v: usb-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc_5v"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vcc_sys>; + }; + +}; + +&cpu0 { + cpu0-supply = <&vdd_cpu>; +}; + +&emmc { + bus-width = <8>; + cap-mmc-highspeed; + mmc-ddr-1_8v; + mmc-hs200-1_8v; + disable-wp; + non-removable; + num-slots = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&emmc_clk>, <&emmc_cmd>, <&emmc_pwr>, <&emmc_bus8>; + vmmc-supply = <&vcc_io>; + vqmmc-supply = <&vcc_flash>; + status = "okay"; +}; + +&gmac { + assigned-clocks = <&cru SCLK_MAC>; + assigned-clock-parents = <&ext_gmac>; + clock_in_out = "input"; + pinctrl-names = "default"; + pinctrl-0 = <&rgmii_pins>, <&phy_rst>, <&phy_pmeb>, <&phy_int>; + phy-supply = <&vcc_lan>; + phy-mode = "rgmii"; + snps,reset-active-low; + snps,reset-delays-us = <0 10000 1000000>; + snps,reset-gpio = <&gpio4 8 GPIO_ACTIVE_LOW>; + tx_delay = <0x30>; + rx_delay = <0x10>; + status = "ok"; +}; + +&i2c0 { + clock-frequency = <400000>; + status = "okay"; + + vdd_cpu: syr827@40 { + compatible = "silergy,syr827"; + fcs,suspend-voltage-selector = <1>; + reg = <0x40>; + regulator-name = "vdd_cpu"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + regulator-boot-on; + regulator-enable-ramp-delay = <300>; + regulator-ramp-delay = <8000>; + vin-supply = <&vcc_sys>; + }; + + vdd_gpu: syr828@41 { + compatible = "silergy,syr828"; + fcs,suspend-voltage-selector = <1>; + reg = <0x41>; + regulator-name = "vdd_gpu"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + vin-supply = <&vcc_sys>; + }; + + act8846: act8846@5a { + compatible = "active-semi,act8846"; + reg = <0x5a>; + pinctrl-names = "default"; + pinctrl-0 = <&pmic_vsel>, <&pwr_hold>; + system-power-controller; + + vp1-supply = <&vcc_sys>; + vp2-supply = <&vcc_sys>; + vp3-supply = <&vcc_sys>; + vp4-supply = <&vcc_sys>; + inl1-supply = <&vcc_sys>; + inl2-supply = <&vcc_sys>; + inl3-supply = <&vcc_20>; + + regulators { + vcc_ddr: REG1 { + regulator-name = "vcc_ddr"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + }; + + vcc_io: REG2 { + regulator-name = "vcc_io"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vdd_log: REG3 { + regulator-name = "vdd_log"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + }; + + vcc_20: REG4 { + regulator-name = "vcc_20"; + regulator-min-microvolt = <2000000>; + regulator-max-microvolt = <2000000>; + regulator-always-on; + }; + + vccio_sd: REG5 { + regulator-name = "vccio_sd"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vdd10_lcd: REG6 { + regulator-name = "vdd10_lcd"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + }; + + vcca_33: REG7 { + regulator-name = "vcca_33"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + vcc_lan: REG8 { + regulator-name = "vcca_lan"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + vccio_pmu: REG9 { + regulator-name = "vccio_pmu"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + vdd_10: REG10 { + regulator-name = "vdd_10"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + }; + + vccio_wl: vcc_18: REG11 { + regulator-name = "vcc_18"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + vcc18_lcd: REG12 { + regulator-name = "vcc18_lcd"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + }; + }; +}; + +&pinctrl { + pcfg_output_high: pcfg-output-high { + output-high; + }; + + pcfg_output_low: pcfg-output-low { + output-low; + }; + + pcfg_pull_up_drv_12ma: pcfg-pull-up-drv-12ma { + bias-pull-up; + drive-strength = <12>; + }; + + act8846 { + pwr_hold: pwr-hold { + rockchip,pins = <0 1 RK_FUNC_GPIO &pcfg_output_high>; + }; + + pmic_vsel: pmic-vsel { + rockchip,pins = <7 14 RK_FUNC_GPIO &pcfg_output_low>; + }; + }; + + gmac { + phy_int: phy-int { + rockchip,pins = <0 9 RK_FUNC_GPIO &pcfg_pull_up>; + }; + + phy_pmeb: phy-pmeb { + rockchip,pins = <0 8 RK_FUNC_GPIO &pcfg_pull_up>; + }; + + phy_rst: phy-rst { + rockchip,pins = <4 8 RK_FUNC_GPIO &pcfg_output_high>; + }; + }; +}; + +&tsadc { + rockchip,hw-tshut-mode = <0>; + rockchip,hw-tshut-polarity = <0>; + status = "okay"; +}; + +&vopb { + status = "okay"; +}; + +&vopb_mmu { + status = "okay"; +}; + +&vopl { + status = "okay"; +}; + +&vopl_mmu { + status = "okay"; +}; + +&wdt { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/rk3288-firefly-reload.dts b/arch/arm/boot/dts/rk3288-firefly-reload.dts new file mode 100644 index 0000000..8adda0a --- /dev/null +++ b/arch/arm/boot/dts/rk3288-firefly-reload.dts @@ -0,0 +1,320 @@ +/* + * Device tree file for Firefly Rockchip RK3288 Reload base board + * Copyright (c) 2016 Randy Li <ayaka-xPW3/0Ywev/iB9QmIjCX8w@public.gmane.org> + * + * Licensed under GPLv2 or later. + */ + +/dts-v1/; +#include "rk3288-firefly-reload-core.dtsi" + +/ { + model = "Firefly-RK3288-reload"; + compatible = "firefly,firefly-rk3288-reload", "rockchip,rk3288"; + + leds { + compatible = "gpio-leds"; + + power { + gpios = <&gpio8 2 GPIO_ACTIVE_LOW>; + label = "firefly:blue:power"; + pinctrl-names = "default"; + pinctrl-0 = <&power_led>; + panic-indicator; + }; + + work { + gpios = <&gpio8 1 GPIO_ACTIVE_LOW>; + label = "firefly:blue:user"; + linux,default-trigger = "rc-feedback"; + pinctrl-names = "default"; + pinctrl-0 = <&work_led>; + }; + }; + + vcc_sd: sdmmc-regulator { + compatible = "regulator-fixed"; + gpio = <&gpio7 11 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc_pwr>; + regulator-name = "vcc_sd"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + startup-delay-us = <100000>; + vin-supply = <&vcc_io>; + }; + + sdio_pwrseq: sdio-pwrseq { + compatible = "mmc-pwrseq-simple"; + clocks = <&hym8563>; + clock-names = "ext_clock"; + pinctrl-names = "default"; + pinctrl-0 = <&wifi_enable>; + reset-gpios = <&gpio4 28 GPIO_ACTIVE_LOW>; + }; + + vcc_host_5v: usb-host-regulator { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio0 14 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&host_vbus_drv>; + regulator-name = "vcc_host_5v"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + vin-supply = <&vcc_5v>; + }; + + vcc_otg_5v: usb-otg-regulator { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio0 12 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&otg_vbus_drv>; + regulator-name = "vcc_otg_5v"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + vin-supply = <&vcc_5v>; + }; + + /* + * A TT8142 creates both dovdd_1v8 and vcc28_dvp, controlled + * by the dvp_pwr pin. + */ + vcc28_dvp: vcc28-dvp-regulator { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio0 11 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&dvp_pwr>; + regulator-name = "vcc28_dvp"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; + vin-supply = <&vcc_io>; + }; + + ir-receiver { + compatible = "gpio-ir-receiver"; + gpios = <&gpio7 0 GPIO_ACTIVE_LOW>; + }; + + gpio-keys { + compatible = "gpio-keys"; + + power { + wakeup-source; + gpios = <&gpio0 5 GPIO_ACTIVE_LOW>; + label = "GPIO Power"; + linux,code = <KEY_POWER>; + pinctrl-names = "default"; + pinctrl-0 = <&pwr_key>; + }; + }; + + sound { + compatible = "simple-audio-card"; + simple-audio-card,name = "SPDIF"; + simple-audio-card,dai-link@1 { /* S/PDIF - S/PDIF */ + cpu { sound-dai = <&spdif>; }; + codec { sound-dai = <&spdif_out>; }; + }; + }; + + spdif_out: spdif-out { + compatible = "linux,spdif-dit"; + #sound-dai-cells = <0>; + }; +}; + +&i2c0 { + hym8563: hym8563@51 { + compatible = "haoyu,hym8563"; + reg = <0x51>; + #clock-cells = <0>; + clock-frequency = <32768>; + clock-output-names = "xin32k"; + interrupt-parent = <&gpio7>; + interrupts = <4 IRQ_TYPE_EDGE_FALLING>; + pinctrl-names = "default"; + pinctrl-0 = <&rtc_int>; + }; +}; + +&i2c2 { + status = "okay"; + + codec: es8328@10 { + compatible = "everest,es8328"; + DVDD-supply = <&vcca_33>; + AVDD-supply = <&vcca_33>; + PVDD-supply = <&vcca_33>; + HPVDD-supply = <&vcca_33>; + clocks = <&cru HCLK_I2S0>, <&cru SCLK_I2S0>; + clock-names = "i2s_hclk", "i2s_clk"; + reg = <0x10>; + }; +}; + +&i2s { + status = "okay"; +}; + +&sdmmc { + bus-width = <4>; + cap-mmc-highspeed; + cap-sd-highspeed; + sd-uhs-sdr12; + sd-uhs-sdr25; + sd-uhs-sdr50; + sd-uhs-sdr104; + sd-uhs-ddr50; + card-detect-delay = <200>; + disable-wp; + num-slots = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc_clk>, <&sdmmc_cmd>, <&sdmmc_cd>, <&sdmmc_bus4>; + vmmc-supply = <&vcc_sd>; + vqmmc-supply = <&vccio_sd>; + status = "okay"; +}; + +&sdio0 { + bus-width = <4>; + cap-sd-highspeed; + sd-uhs-sdr12; + sd-uhs-sdr25; + sd-uhs-sdr50; + sd-uhs-ddr50; + cap-sdio-irq; + disable-wp; + mmc-pwrseq = <&sdio_pwrseq>; + non-removable; + num-slots = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&sdio0_bus4>, <&sdio0_cmd>, <&sdio0_clk>, <&sdio0_int>; + vmmc-supply = <&vbat_wl>; + vqmmc-supply = <&vccio_wl>; + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_xfer>, <&uart0_cts>, <&uart0_rts>; + status = "okay"; +}; + +&uart1 { + status = "okay"; +}; + +&uart2 { + status = "okay"; +}; + +&uart3 { + status = "okay"; +}; + +&usbphy { + status = "okay"; +}; + +&usb_host1 { + pinctrl-names = "default"; + pinctrl-0 = <&usbhub_rst>; + status = "okay"; +}; + +&usb_otg { + status = "okay"; +}; + +&spdif { + status = "okay"; +}; + +&pinctrl { + ir { + ir_int: ir-int { + rockchip,pins = <7 0 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + dvp { + dvp_pwr: dvp-pwr { + rockchip,pins = <0 11 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + hym8563 { + rtc_int: rtc-int { + rockchip,pins = <7 4 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + keys { + pwr_key: pwr-key { + rockchip,pins = <0 5 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + leds { + power_led: power-led { + rockchip,pins = <8 2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + work_led: work-led { + rockchip,pins = <8 1 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + sdmmc { + /* + * Default drive strength isn't enough to achieve even + * high-speed mode on firefly board so bump up to 12ma. + */ + sdmmc_bus4: sdmmc-bus4 { + rockchip,pins = <6 16 RK_FUNC_1 &pcfg_pull_up_drv_12ma>, + <6 17 RK_FUNC_1 &pcfg_pull_up_drv_12ma>, + <6 18 RK_FUNC_1 &pcfg_pull_up_drv_12ma>, + <6 19 RK_FUNC_1 &pcfg_pull_up_drv_12ma>; + }; + + sdmmc_clk: sdmmc-clk { + rockchip,pins = <6 20 RK_FUNC_1 &pcfg_pull_none_12ma>; + }; + + sdmmc_cmd: sdmmc-cmd { + rockchip,pins = <6 21 RK_FUNC_1 &pcfg_pull_up_drv_12ma>; + }; + + sdmmc_pwr: sdmmc-pwr { + rockchip,pins = <7 11 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + sdio { + wifi_enable: wifi-enable { + rockchip,pins = <4 28 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + usb_host { + host_vbus_drv: host-vbus-drv { + rockchip,pins = <0 14 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + usbhub_rst: usbhub-rst { + rockchip,pins = <8 3 RK_FUNC_GPIO &pcfg_output_high>; + }; + }; + + usb_otg { + otg_vbus_drv: otg-vbus-drv { + rockchip,pins = <0 12 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; +}; -- 2.7.4 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html
WARNING: multiple messages have this Message-ID (diff)
From: ayaka@soulik.info (Randy Li) To: linux-arm-kernel@lists.infradead.org Subject: [PATCH] ARM: dts: add rk3288-firefly-reload Date: Sun, 17 Jul 2016 23:38:57 +0800 [thread overview] Message-ID: <1468769937-23387-2-git-send-email-ayaka@soulik.info> (raw) In-Reply-To: <1468769937-23387-1-git-send-email-ayaka@soulik.info> The Firefly RK3288 Reload is a combination Firefly rk3288 core board with the Reload baseboard. Add a dtsi for the Firefly rk3288 core which can be included into the dts for the various baseboards in the future and dts for Reload base board. Currently supported are serial console, wired networking, eMMC and SD storage, SPFIF, IR receiver, LEDs, SDIO wifi and USB. But only the OTG could work on the host mode now, the other USB host can't work now, additional patches are required. Signed-off-by: Randy Li <ayaka@soulik.info> --- Documentation/devicetree/bindings/arm/rockchip.txt | 4 + arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/rk3288-firefly-reload-core.dtsi | 304 ++++++++++++++++++++ arch/arm/boot/dts/rk3288-firefly-reload.dts | 320 +++++++++++++++++++++ 4 files changed, 629 insertions(+) create mode 100644 arch/arm/boot/dts/rk3288-firefly-reload-core.dtsi create mode 100644 arch/arm/boot/dts/rk3288-firefly-reload.dts diff --git a/Documentation/devicetree/bindings/arm/rockchip.txt b/Documentation/devicetree/bindings/arm/rockchip.txt index 715d960..3380212c 100644 --- a/Documentation/devicetree/bindings/arm/rockchip.txt +++ b/Documentation/devicetree/bindings/arm/rockchip.txt @@ -31,6 +31,10 @@ Rockchip platforms device tree bindings or - compatible = "firefly,firefly-rk3288-beta", "rockchip,rk3288"; +- Firefly Firefly-RK3288 Reload board: + Required root node properties: + - compatible = "firefly,firefly-rk3288-reload", "rockchip,rk3288"; + - ChipSPARK PopMetal-RK3288 board: Required root node properties: - compatible = "chipspark,popmetal-rk3288", "rockchip,rk3288"; diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 414b427..8173e77 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -606,6 +606,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += \ rk3288-evb-rk808.dtb \ rk3288-firefly-beta.dtb \ rk3288-firefly.dtb \ + rk3288-firefly-reload.dtb \ rk3288-miqi.dtb \ rk3288-popmetal.dtb \ rk3288-r89.dtb \ diff --git a/arch/arm/boot/dts/rk3288-firefly-reload-core.dtsi b/arch/arm/boot/dts/rk3288-firefly-reload-core.dtsi new file mode 100644 index 0000000..039ae16 --- /dev/null +++ b/arch/arm/boot/dts/rk3288-firefly-reload-core.dtsi @@ -0,0 +1,304 @@ +/* + * Device tree file for Firefly Rockchip RK3288 Core board + * Copyright (c) 2016 Randy Li <ayaka@soulik.info> + * + * Licensed under GPLv2 or later. + */ + +#include <dt-bindings/input/input.h> +#include "rk3288.dtsi" + +/ { + memory { + device_type = "memory"; + reg = <0 0x80000000>; + }; + + dovdd_1v8: dovdd-1v8-regulator { + compatible = "regulator-fixed"; + regulator-name = "dovdd_1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vcc28_dvp>; + }; + + ext_gmac: external-gmac-clock { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <125000000>; + clock-output-names = "ext_gmac"; + }; + + io_domains: io-domains { + compatible = "rockchip,rk3288-io-voltage-domain"; + rockchip,grf = <&grf>; + + audio-supply = <&vcca_33>; + bb-supply = <&vcc_io>; + dvp-supply = <&dovdd_1v8>; + flash0-supply = <&vcc_flash>; + flash1-supply = <&vcc_lan>; + gpio30-supply = <&vcc_io>; + gpio1830-supply = <&vcc_io>; + lcdc-supply = <&vcc_io>; + sdcard-supply = <&vccio_sd>; + wifi-supply = <&vccio_wl>; + }; + + vbat_wl: vcc_sys: vsys-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc_sys"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + regulator-boot-on; + }; + + vcc_flash: flash-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc_flash"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vcc_io>; + }; + + vcc_5v: usb-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc_5v"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vcc_sys>; + }; + +}; + +&cpu0 { + cpu0-supply = <&vdd_cpu>; +}; + +&emmc { + bus-width = <8>; + cap-mmc-highspeed; + mmc-ddr-1_8v; + mmc-hs200-1_8v; + disable-wp; + non-removable; + num-slots = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&emmc_clk>, <&emmc_cmd>, <&emmc_pwr>, <&emmc_bus8>; + vmmc-supply = <&vcc_io>; + vqmmc-supply = <&vcc_flash>; + status = "okay"; +}; + +&gmac { + assigned-clocks = <&cru SCLK_MAC>; + assigned-clock-parents = <&ext_gmac>; + clock_in_out = "input"; + pinctrl-names = "default"; + pinctrl-0 = <&rgmii_pins>, <&phy_rst>, <&phy_pmeb>, <&phy_int>; + phy-supply = <&vcc_lan>; + phy-mode = "rgmii"; + snps,reset-active-low; + snps,reset-delays-us = <0 10000 1000000>; + snps,reset-gpio = <&gpio4 8 GPIO_ACTIVE_LOW>; + tx_delay = <0x30>; + rx_delay = <0x10>; + status = "ok"; +}; + +&i2c0 { + clock-frequency = <400000>; + status = "okay"; + + vdd_cpu: syr827 at 40 { + compatible = "silergy,syr827"; + fcs,suspend-voltage-selector = <1>; + reg = <0x40>; + regulator-name = "vdd_cpu"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + regulator-boot-on; + regulator-enable-ramp-delay = <300>; + regulator-ramp-delay = <8000>; + vin-supply = <&vcc_sys>; + }; + + vdd_gpu: syr828 at 41 { + compatible = "silergy,syr828"; + fcs,suspend-voltage-selector = <1>; + reg = <0x41>; + regulator-name = "vdd_gpu"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + vin-supply = <&vcc_sys>; + }; + + act8846: act8846 at 5a { + compatible = "active-semi,act8846"; + reg = <0x5a>; + pinctrl-names = "default"; + pinctrl-0 = <&pmic_vsel>, <&pwr_hold>; + system-power-controller; + + vp1-supply = <&vcc_sys>; + vp2-supply = <&vcc_sys>; + vp3-supply = <&vcc_sys>; + vp4-supply = <&vcc_sys>; + inl1-supply = <&vcc_sys>; + inl2-supply = <&vcc_sys>; + inl3-supply = <&vcc_20>; + + regulators { + vcc_ddr: REG1 { + regulator-name = "vcc_ddr"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + }; + + vcc_io: REG2 { + regulator-name = "vcc_io"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vdd_log: REG3 { + regulator-name = "vdd_log"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + }; + + vcc_20: REG4 { + regulator-name = "vcc_20"; + regulator-min-microvolt = <2000000>; + regulator-max-microvolt = <2000000>; + regulator-always-on; + }; + + vccio_sd: REG5 { + regulator-name = "vccio_sd"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vdd10_lcd: REG6 { + regulator-name = "vdd10_lcd"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + }; + + vcca_33: REG7 { + regulator-name = "vcca_33"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + vcc_lan: REG8 { + regulator-name = "vcca_lan"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + vccio_pmu: REG9 { + regulator-name = "vccio_pmu"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + vdd_10: REG10 { + regulator-name = "vdd_10"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + }; + + vccio_wl: vcc_18: REG11 { + regulator-name = "vcc_18"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + vcc18_lcd: REG12 { + regulator-name = "vcc18_lcd"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + }; + }; +}; + +&pinctrl { + pcfg_output_high: pcfg-output-high { + output-high; + }; + + pcfg_output_low: pcfg-output-low { + output-low; + }; + + pcfg_pull_up_drv_12ma: pcfg-pull-up-drv-12ma { + bias-pull-up; + drive-strength = <12>; + }; + + act8846 { + pwr_hold: pwr-hold { + rockchip,pins = <0 1 RK_FUNC_GPIO &pcfg_output_high>; + }; + + pmic_vsel: pmic-vsel { + rockchip,pins = <7 14 RK_FUNC_GPIO &pcfg_output_low>; + }; + }; + + gmac { + phy_int: phy-int { + rockchip,pins = <0 9 RK_FUNC_GPIO &pcfg_pull_up>; + }; + + phy_pmeb: phy-pmeb { + rockchip,pins = <0 8 RK_FUNC_GPIO &pcfg_pull_up>; + }; + + phy_rst: phy-rst { + rockchip,pins = <4 8 RK_FUNC_GPIO &pcfg_output_high>; + }; + }; +}; + +&tsadc { + rockchip,hw-tshut-mode = <0>; + rockchip,hw-tshut-polarity = <0>; + status = "okay"; +}; + +&vopb { + status = "okay"; +}; + +&vopb_mmu { + status = "okay"; +}; + +&vopl { + status = "okay"; +}; + +&vopl_mmu { + status = "okay"; +}; + +&wdt { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/rk3288-firefly-reload.dts b/arch/arm/boot/dts/rk3288-firefly-reload.dts new file mode 100644 index 0000000..8adda0a --- /dev/null +++ b/arch/arm/boot/dts/rk3288-firefly-reload.dts @@ -0,0 +1,320 @@ +/* + * Device tree file for Firefly Rockchip RK3288 Reload base board + * Copyright (c) 2016 Randy Li <ayaka@soulik.info> + * + * Licensed under GPLv2 or later. + */ + +/dts-v1/; +#include "rk3288-firefly-reload-core.dtsi" + +/ { + model = "Firefly-RK3288-reload"; + compatible = "firefly,firefly-rk3288-reload", "rockchip,rk3288"; + + leds { + compatible = "gpio-leds"; + + power { + gpios = <&gpio8 2 GPIO_ACTIVE_LOW>; + label = "firefly:blue:power"; + pinctrl-names = "default"; + pinctrl-0 = <&power_led>; + panic-indicator; + }; + + work { + gpios = <&gpio8 1 GPIO_ACTIVE_LOW>; + label = "firefly:blue:user"; + linux,default-trigger = "rc-feedback"; + pinctrl-names = "default"; + pinctrl-0 = <&work_led>; + }; + }; + + vcc_sd: sdmmc-regulator { + compatible = "regulator-fixed"; + gpio = <&gpio7 11 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc_pwr>; + regulator-name = "vcc_sd"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + startup-delay-us = <100000>; + vin-supply = <&vcc_io>; + }; + + sdio_pwrseq: sdio-pwrseq { + compatible = "mmc-pwrseq-simple"; + clocks = <&hym8563>; + clock-names = "ext_clock"; + pinctrl-names = "default"; + pinctrl-0 = <&wifi_enable>; + reset-gpios = <&gpio4 28 GPIO_ACTIVE_LOW>; + }; + + vcc_host_5v: usb-host-regulator { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio0 14 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&host_vbus_drv>; + regulator-name = "vcc_host_5v"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + vin-supply = <&vcc_5v>; + }; + + vcc_otg_5v: usb-otg-regulator { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio0 12 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&otg_vbus_drv>; + regulator-name = "vcc_otg_5v"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + vin-supply = <&vcc_5v>; + }; + + /* + * A TT8142 creates both dovdd_1v8 and vcc28_dvp, controlled + * by the dvp_pwr pin. + */ + vcc28_dvp: vcc28-dvp-regulator { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio0 11 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&dvp_pwr>; + regulator-name = "vcc28_dvp"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; + vin-supply = <&vcc_io>; + }; + + ir-receiver { + compatible = "gpio-ir-receiver"; + gpios = <&gpio7 0 GPIO_ACTIVE_LOW>; + }; + + gpio-keys { + compatible = "gpio-keys"; + + power { + wakeup-source; + gpios = <&gpio0 5 GPIO_ACTIVE_LOW>; + label = "GPIO Power"; + linux,code = <KEY_POWER>; + pinctrl-names = "default"; + pinctrl-0 = <&pwr_key>; + }; + }; + + sound { + compatible = "simple-audio-card"; + simple-audio-card,name = "SPDIF"; + simple-audio-card,dai-link at 1 { /* S/PDIF - S/PDIF */ + cpu { sound-dai = <&spdif>; }; + codec { sound-dai = <&spdif_out>; }; + }; + }; + + spdif_out: spdif-out { + compatible = "linux,spdif-dit"; + #sound-dai-cells = <0>; + }; +}; + +&i2c0 { + hym8563: hym8563 at 51 { + compatible = "haoyu,hym8563"; + reg = <0x51>; + #clock-cells = <0>; + clock-frequency = <32768>; + clock-output-names = "xin32k"; + interrupt-parent = <&gpio7>; + interrupts = <4 IRQ_TYPE_EDGE_FALLING>; + pinctrl-names = "default"; + pinctrl-0 = <&rtc_int>; + }; +}; + +&i2c2 { + status = "okay"; + + codec: es8328 at 10 { + compatible = "everest,es8328"; + DVDD-supply = <&vcca_33>; + AVDD-supply = <&vcca_33>; + PVDD-supply = <&vcca_33>; + HPVDD-supply = <&vcca_33>; + clocks = <&cru HCLK_I2S0>, <&cru SCLK_I2S0>; + clock-names = "i2s_hclk", "i2s_clk"; + reg = <0x10>; + }; +}; + +&i2s { + status = "okay"; +}; + +&sdmmc { + bus-width = <4>; + cap-mmc-highspeed; + cap-sd-highspeed; + sd-uhs-sdr12; + sd-uhs-sdr25; + sd-uhs-sdr50; + sd-uhs-sdr104; + sd-uhs-ddr50; + card-detect-delay = <200>; + disable-wp; + num-slots = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc_clk>, <&sdmmc_cmd>, <&sdmmc_cd>, <&sdmmc_bus4>; + vmmc-supply = <&vcc_sd>; + vqmmc-supply = <&vccio_sd>; + status = "okay"; +}; + +&sdio0 { + bus-width = <4>; + cap-sd-highspeed; + sd-uhs-sdr12; + sd-uhs-sdr25; + sd-uhs-sdr50; + sd-uhs-ddr50; + cap-sdio-irq; + disable-wp; + mmc-pwrseq = <&sdio_pwrseq>; + non-removable; + num-slots = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&sdio0_bus4>, <&sdio0_cmd>, <&sdio0_clk>, <&sdio0_int>; + vmmc-supply = <&vbat_wl>; + vqmmc-supply = <&vccio_wl>; + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_xfer>, <&uart0_cts>, <&uart0_rts>; + status = "okay"; +}; + +&uart1 { + status = "okay"; +}; + +&uart2 { + status = "okay"; +}; + +&uart3 { + status = "okay"; +}; + +&usbphy { + status = "okay"; +}; + +&usb_host1 { + pinctrl-names = "default"; + pinctrl-0 = <&usbhub_rst>; + status = "okay"; +}; + +&usb_otg { + status = "okay"; +}; + +&spdif { + status = "okay"; +}; + +&pinctrl { + ir { + ir_int: ir-int { + rockchip,pins = <7 0 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + dvp { + dvp_pwr: dvp-pwr { + rockchip,pins = <0 11 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + hym8563 { + rtc_int: rtc-int { + rockchip,pins = <7 4 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + keys { + pwr_key: pwr-key { + rockchip,pins = <0 5 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + leds { + power_led: power-led { + rockchip,pins = <8 2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + work_led: work-led { + rockchip,pins = <8 1 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + sdmmc { + /* + * Default drive strength isn't enough to achieve even + * high-speed mode on firefly board so bump up to 12ma. + */ + sdmmc_bus4: sdmmc-bus4 { + rockchip,pins = <6 16 RK_FUNC_1 &pcfg_pull_up_drv_12ma>, + <6 17 RK_FUNC_1 &pcfg_pull_up_drv_12ma>, + <6 18 RK_FUNC_1 &pcfg_pull_up_drv_12ma>, + <6 19 RK_FUNC_1 &pcfg_pull_up_drv_12ma>; + }; + + sdmmc_clk: sdmmc-clk { + rockchip,pins = <6 20 RK_FUNC_1 &pcfg_pull_none_12ma>; + }; + + sdmmc_cmd: sdmmc-cmd { + rockchip,pins = <6 21 RK_FUNC_1 &pcfg_pull_up_drv_12ma>; + }; + + sdmmc_pwr: sdmmc-pwr { + rockchip,pins = <7 11 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + sdio { + wifi_enable: wifi-enable { + rockchip,pins = <4 28 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + usb_host { + host_vbus_drv: host-vbus-drv { + rockchip,pins = <0 14 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + usbhub_rst: usbhub-rst { + rockchip,pins = <8 3 RK_FUNC_GPIO &pcfg_output_high>; + }; + }; + + usb_otg { + otg_vbus_drv: otg-vbus-drv { + rockchip,pins = <0 12 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; +}; -- 2.7.4
next prev parent reply other threads:[~2016-07-17 15:38 UTC|newest] Thread overview: 123+ messages / expand[flat|nested] mbox.gz Atom feed top 2016-07-06 15:25 [PATCH 0/3] ARM: dts: the dts support for rk3288 firefly reload ayaka 2016-07-06 15:25 ` ayaka 2016-07-06 15:25 ` ayaka 2016-07-06 15:25 ` [PATCH 1/3] ARM: dts: add label leds for rk3288-firefly.dtsi ayaka 2016-07-06 15:25 ` ayaka 2016-07-06 15:25 ` ayaka 2016-07-06 15:25 ` [PATCH 2/3] ARM: dts: move regulator settings from common to specifics ayaka 2016-07-06 15:25 ` ayaka 2016-07-06 15:25 ` ayaka 2016-07-06 16:13 ` Heiko Stuebner 2016-07-06 16:13 ` Heiko Stuebner 2016-07-06 16:13 ` Heiko Stuebner 2016-07-06 17:34 ` [PATCH 0/3] " Randy Li 2016-07-06 17:34 ` Randy Li 2016-07-06 17:34 ` Randy Li 2016-07-06 17:34 ` [PATCH 1/3] ARM: dts: add label leds for rk3288-firefly.dtsi Randy Li 2016-07-06 17:34 ` Randy Li 2016-07-06 17:34 ` [PATCH 2/3] ARM: dts: move regulator settings from common to specifics Randy Li 2016-07-06 17:34 ` Randy Li 2016-07-06 17:34 ` [PATCH 3/3] ARM: dts: add rk3288-firefly-reload Randy Li 2016-07-06 17:34 ` Randy Li 2016-07-06 17:52 ` [PATCH 0/3] Re:[PATCH 2/3] ARM: dts: move regulator settings from common to specifics Randy Li 2016-07-06 17:52 ` Randy Li 2016-07-06 17:52 ` Randy Li 2016-07-06 17:52 ` [PATCH 1/3] ARM: dts: add label leds for rk3288-firefly.dtsi Randy Li 2016-07-06 17:52 ` Randy Li 2016-07-06 17:52 ` [PATCH 2/3] ARM: dts: move regulator settings from common to specifics Randy Li 2016-07-06 17:52 ` Randy Li 2016-07-06 17:52 ` Randy Li 2016-07-06 17:52 ` [PATCH 3/3] ARM: dts: add rk3288-firefly-reload Randy Li 2016-07-06 17:52 ` Randy Li 2016-07-06 18:06 ` [PATCH 2/3] ARM: dts: move regulator settings from common to specifics Randy Li 2016-07-06 18:06 ` Randy Li 2016-07-06 18:06 ` Randy Li 2016-07-06 18:22 ` [PATCH 0/3] ARM: dts: the dts support for rk3288 firefly reload Randy Li 2016-07-06 18:22 ` Randy Li 2016-07-06 18:22 ` Randy Li 2016-07-06 18:22 ` [PATCH 1/3] ARM: dts: add label leds for rk3288-firefly.dtsi Randy Li 2016-07-06 18:22 ` Randy Li 2016-07-06 18:22 ` [PATCH 2/3] ARM: dts: move regulator settings from common to specifics Randy Li 2016-07-06 18:22 ` Randy Li 2016-07-06 18:23 ` [PATCH 3/3] ARM: dts: add rk3288-firefly-reload Randy Li 2016-07-06 18:23 ` Randy Li 2016-07-07 21:35 ` [PATCH 0/3] ARM: dts: the dts support for rk3288 firefly reload Heiko Stuebner 2016-07-07 21:35 ` Heiko Stuebner 2016-07-07 21:35 ` Heiko Stuebner 2016-07-09 15:42 ` ayaka 2016-07-09 15:42 ` ayaka 2016-07-09 23:06 ` Heiko Stuebner 2016-07-09 23:06 ` Heiko Stuebner 2016-07-17 15:38 ` [PATCH] " Randy Li 2016-07-17 15:38 ` Randy Li [not found] ` <1468769937-23387-1-git-send-email-ayaka-xPW3/0Ywev/iB9QmIjCX8w@public.gmane.org> 2016-07-17 15:38 ` Randy Li [this message] 2016-07-17 15:38 ` [PATCH] ARM: dts: add rk3288-firefly-reload Randy Li [not found] ` <1468769937-23387-2-git-send-email-ayaka-xPW3/0Ywev/iB9QmIjCX8w@public.gmane.org> 2016-07-17 21:01 ` Rob Herring 2016-07-17 21:01 ` Rob Herring 2016-07-18 11:24 ` Heiko Stübner 2016-07-18 11:24 ` Heiko Stübner 2016-07-18 15:32 ` [PATCH v2] " Randy Li 2016-07-18 15:32 ` Randy Li 2016-07-18 15:32 ` Randy Li 2016-07-18 15:32 ` [PATCH] " Randy Li 2016-07-18 15:32 ` Randy Li 2016-07-18 15:32 ` Randy Li 2016-07-18 19:46 ` Heiko Stübner 2016-07-18 19:46 ` Heiko Stübner 2016-08-07 3:40 ` Shawn Lin 2016-08-07 3:40 ` Shawn Lin 2016-08-07 3:40 ` Shawn Lin 2016-08-07 14:44 ` Heiko Stuebner 2016-08-07 14:44 ` Heiko Stuebner 2016-08-07 14:44 ` Heiko Stuebner 2016-08-08 2:29 ` Shawn Lin 2016-08-08 2:29 ` Shawn Lin 2016-08-09 9:28 ` 陈豪 2016-08-09 9:28 ` 陈豪 2016-08-09 9:28 ` 陈豪 2016-08-09 10:02 ` 陈豪 2016-08-09 10:02 ` 陈豪 2016-08-09 10:02 ` 陈豪 2016-08-09 10:06 ` Randy Li 2016-08-09 10:06 ` Randy Li 2016-08-09 10:06 ` Randy Li 2016-08-09 10:58 ` Heiko Stübner 2016-08-09 10:58 ` Heiko Stübner 2016-08-09 10:58 ` Heiko Stübner 2016-08-10 1:12 ` Randy Li 2016-08-10 1:12 ` Randy Li 2016-08-10 1:12 ` Randy Li 2016-08-14 11:27 ` [PATCH 0/2] ARM: dts: rockchip: correct the regulators in firefly reload Randy Li 2016-08-14 11:27 ` Randy Li 2016-08-14 11:27 ` Randy Li 2016-08-14 11:27 ` [PATCH 1/2] ARM: dts: rockchip: remove excess sd properties for " Randy Li 2016-08-14 11:27 ` Randy Li 2016-08-14 11:27 ` Randy Li 2016-08-14 12:30 ` Heiko Stuebner 2016-08-14 12:30 ` Heiko Stuebner 2016-08-14 12:38 ` ayaka 2016-08-14 12:38 ` ayaka 2016-08-14 12:38 ` ayaka 2016-08-17 14:10 ` Heiko Stübner 2016-08-17 14:10 ` Heiko Stübner 2016-08-17 17:03 ` [PATCH 0/2 v2] ARM: dts: rockchip: correct the regulators in " Randy Li 2016-08-17 17:03 ` Randy Li 2016-08-17 17:03 ` [PATCH 1/2] ARM: dts: rockchip: remove excess sd properties for " Randy Li 2016-08-17 17:03 ` Randy Li 2016-08-18 13:35 ` Heiko Stübner 2016-08-18 13:35 ` Heiko Stübner 2016-08-18 13:35 ` Heiko Stübner 2016-08-18 14:20 ` ayaka 2016-08-18 14:20 ` ayaka 2016-08-17 17:03 ` [PATCH 2/2] ARM: dts: rockchip: add missing regulators for firefly reload board Randy Li 2016-08-17 17:03 ` Randy Li 2016-08-17 17:03 ` Randy Li 2016-08-18 16:47 ` Heiko Stübner 2016-08-18 16:47 ` Heiko Stübner 2016-08-18 16:47 ` Heiko Stübner 2016-08-14 11:27 ` Randy Li 2016-08-14 11:27 ` Randy Li 2016-08-14 11:27 ` Randy Li 2016-07-06 15:25 ` [PATCH 3/3] ARM: dts: add rk3288-firefly-reload ayaka 2016-07-06 15:25 ` ayaka 2016-07-06 15:25 ` ayaka
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1468769937-23387-2-git-send-email-ayaka@soulik.info \ --to=ayaka-xpw3/0ywev/ib9qmijcx8w@public.gmane.org \ --cc==linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \ --cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \ --cc=heiko-4mtYJXux2i+zQB+pC5nmwQ@public.gmane.org \ --cc=linux-I+IVW8TIWO2tmTQ+vhA3Yw@public.gmane.org \ --cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \ --cc=linux-rockchip-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \ --cc=mark.rutland-5wv7dgnIgG8@public.gmane.org \ --cc=robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.