From: ayaka <ayaka@soulik.info>
To: "Heiko Stübner" <heiko@sntech.de>
Cc: devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-rockchip@lists.infradead.org,
linux-arm-kernel@lists.infradead.org, linux@armlinux.org.uk,
mark.rutland@arm.com
Subject: Re: [PATCH 1/2] ARM: dts: rockchip: remove excess sd properties for firefly reload
Date: Thu, 18 Aug 2016 22:20:27 +0800 [thread overview]
Message-ID: <e28a9479-acbe-80f9-0985-d8f084b55245@soulik.info> (raw)
In-Reply-To: <49067977.DDSr6TXKjU@diego>
On 08/18/2016 09:35 PM, Heiko Stübner wrote:
> Am Donnerstag, 18. August 2016, 01:03:10 schrieb Randy Li:
>> Because of a bug in hardware design, the sdcard at firefly
>> rk3288 reload board can't switch the io voltage level to 1.8v.
>>
>> Signed-off-by: Randy Li <ayaka@soulik.info>
> applied to my dts32 branch for 4.9
>
> In the future, please try to base your patches either on the correct dts
> branch in my repo [0] or simply on linux-next which does contain these too,
OK, I would based on linux-next time.
> as I did reorder some things when applying your initial firefly-reload patch.
Thank you for guide
>
> Thanks
> Heiko
>
>
> [0] https://git.kernel.org/cgit/linux/kernel/git/mmind/linux-rockchip.git/
> [dts patches v4.x-armsoc/dts32 and v.x-armsoc/dts64 depending on what board
> you're working on]
WARNING: multiple messages have this Message-ID (diff)
From: ayaka@soulik.info (ayaka)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 1/2] ARM: dts: rockchip: remove excess sd properties for firefly reload
Date: Thu, 18 Aug 2016 22:20:27 +0800 [thread overview]
Message-ID: <e28a9479-acbe-80f9-0985-d8f084b55245@soulik.info> (raw)
In-Reply-To: <49067977.DDSr6TXKjU@diego>
On 08/18/2016 09:35 PM, Heiko St?bner wrote:
> Am Donnerstag, 18. August 2016, 01:03:10 schrieb Randy Li:
>> Because of a bug in hardware design, the sdcard at firefly
>> rk3288 reload board can't switch the io voltage level to 1.8v.
>>
>> Signed-off-by: Randy Li <ayaka@soulik.info>
> applied to my dts32 branch for 4.9
>
> In the future, please try to base your patches either on the correct dts
> branch in my repo [0] or simply on linux-next which does contain these too,
OK, I would based on linux-next time.
> as I did reorder some things when applying your initial firefly-reload patch.
Thank you for guide
>
> Thanks
> Heiko
>
>
> [0] https://git.kernel.org/cgit/linux/kernel/git/mmind/linux-rockchip.git/
> [dts patches v4.x-armsoc/dts32 and v.x-armsoc/dts64 depending on what board
> you're working on]
next prev parent reply other threads:[~2016-08-18 14:20 UTC|newest]
Thread overview: 123+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-07-06 15:25 [PATCH 0/3] ARM: dts: the dts support for rk3288 firefly reload ayaka
2016-07-06 15:25 ` ayaka
2016-07-06 15:25 ` ayaka
2016-07-06 15:25 ` [PATCH 1/3] ARM: dts: add label leds for rk3288-firefly.dtsi ayaka
2016-07-06 15:25 ` ayaka
2016-07-06 15:25 ` ayaka
2016-07-06 15:25 ` [PATCH 2/3] ARM: dts: move regulator settings from common to specifics ayaka
2016-07-06 15:25 ` ayaka
2016-07-06 15:25 ` ayaka
2016-07-06 16:13 ` Heiko Stuebner
2016-07-06 16:13 ` Heiko Stuebner
2016-07-06 16:13 ` Heiko Stuebner
2016-07-06 17:34 ` [PATCH 0/3] " Randy Li
2016-07-06 17:34 ` Randy Li
2016-07-06 17:34 ` Randy Li
2016-07-06 17:34 ` [PATCH 1/3] ARM: dts: add label leds for rk3288-firefly.dtsi Randy Li
2016-07-06 17:34 ` Randy Li
2016-07-06 17:34 ` [PATCH 2/3] ARM: dts: move regulator settings from common to specifics Randy Li
2016-07-06 17:34 ` Randy Li
2016-07-06 17:34 ` [PATCH 3/3] ARM: dts: add rk3288-firefly-reload Randy Li
2016-07-06 17:34 ` Randy Li
2016-07-06 17:52 ` [PATCH 0/3] Re:[PATCH 2/3] ARM: dts: move regulator settings from common to specifics Randy Li
2016-07-06 17:52 ` Randy Li
2016-07-06 17:52 ` Randy Li
2016-07-06 17:52 ` [PATCH 1/3] ARM: dts: add label leds for rk3288-firefly.dtsi Randy Li
2016-07-06 17:52 ` Randy Li
2016-07-06 17:52 ` [PATCH 2/3] ARM: dts: move regulator settings from common to specifics Randy Li
2016-07-06 17:52 ` Randy Li
2016-07-06 17:52 ` Randy Li
2016-07-06 17:52 ` [PATCH 3/3] ARM: dts: add rk3288-firefly-reload Randy Li
2016-07-06 17:52 ` Randy Li
2016-07-06 18:06 ` [PATCH 2/3] ARM: dts: move regulator settings from common to specifics Randy Li
2016-07-06 18:06 ` Randy Li
2016-07-06 18:06 ` Randy Li
2016-07-06 18:22 ` [PATCH 0/3] ARM: dts: the dts support for rk3288 firefly reload Randy Li
2016-07-06 18:22 ` Randy Li
2016-07-06 18:22 ` Randy Li
2016-07-06 18:22 ` [PATCH 1/3] ARM: dts: add label leds for rk3288-firefly.dtsi Randy Li
2016-07-06 18:22 ` Randy Li
2016-07-06 18:22 ` [PATCH 2/3] ARM: dts: move regulator settings from common to specifics Randy Li
2016-07-06 18:22 ` Randy Li
2016-07-06 18:23 ` [PATCH 3/3] ARM: dts: add rk3288-firefly-reload Randy Li
2016-07-06 18:23 ` Randy Li
2016-07-07 21:35 ` [PATCH 0/3] ARM: dts: the dts support for rk3288 firefly reload Heiko Stuebner
2016-07-07 21:35 ` Heiko Stuebner
2016-07-07 21:35 ` Heiko Stuebner
2016-07-09 15:42 ` ayaka
2016-07-09 15:42 ` ayaka
2016-07-09 23:06 ` Heiko Stuebner
2016-07-09 23:06 ` Heiko Stuebner
2016-07-17 15:38 ` [PATCH] " Randy Li
2016-07-17 15:38 ` Randy Li
[not found] ` <1468769937-23387-1-git-send-email-ayaka-xPW3/0Ywev/iB9QmIjCX8w@public.gmane.org>
2016-07-17 15:38 ` [PATCH] ARM: dts: add rk3288-firefly-reload Randy Li
2016-07-17 15:38 ` Randy Li
[not found] ` <1468769937-23387-2-git-send-email-ayaka-xPW3/0Ywev/iB9QmIjCX8w@public.gmane.org>
2016-07-17 21:01 ` Rob Herring
2016-07-17 21:01 ` Rob Herring
2016-07-18 11:24 ` Heiko Stübner
2016-07-18 11:24 ` Heiko Stübner
2016-07-18 15:32 ` [PATCH v2] " Randy Li
2016-07-18 15:32 ` Randy Li
2016-07-18 15:32 ` Randy Li
2016-07-18 15:32 ` [PATCH] " Randy Li
2016-07-18 15:32 ` Randy Li
2016-07-18 15:32 ` Randy Li
2016-07-18 19:46 ` Heiko Stübner
2016-07-18 19:46 ` Heiko Stübner
2016-08-07 3:40 ` Shawn Lin
2016-08-07 3:40 ` Shawn Lin
2016-08-07 3:40 ` Shawn Lin
2016-08-07 14:44 ` Heiko Stuebner
2016-08-07 14:44 ` Heiko Stuebner
2016-08-07 14:44 ` Heiko Stuebner
2016-08-08 2:29 ` Shawn Lin
2016-08-08 2:29 ` Shawn Lin
2016-08-09 9:28 ` 陈豪
2016-08-09 9:28 ` 陈豪
2016-08-09 9:28 ` 陈豪
2016-08-09 10:02 ` 陈豪
2016-08-09 10:02 ` 陈豪
2016-08-09 10:02 ` 陈豪
2016-08-09 10:06 ` Randy Li
2016-08-09 10:06 ` Randy Li
2016-08-09 10:06 ` Randy Li
2016-08-09 10:58 ` Heiko Stübner
2016-08-09 10:58 ` Heiko Stübner
2016-08-09 10:58 ` Heiko Stübner
2016-08-10 1:12 ` Randy Li
2016-08-10 1:12 ` Randy Li
2016-08-10 1:12 ` Randy Li
2016-08-14 11:27 ` [PATCH 0/2] ARM: dts: rockchip: correct the regulators in firefly reload Randy Li
2016-08-14 11:27 ` Randy Li
2016-08-14 11:27 ` Randy Li
2016-08-14 11:27 ` [PATCH 1/2] ARM: dts: rockchip: remove excess sd properties for " Randy Li
2016-08-14 11:27 ` Randy Li
2016-08-14 11:27 ` Randy Li
2016-08-14 12:30 ` Heiko Stuebner
2016-08-14 12:30 ` Heiko Stuebner
2016-08-14 12:38 ` ayaka
2016-08-14 12:38 ` ayaka
2016-08-14 12:38 ` ayaka
2016-08-17 14:10 ` Heiko Stübner
2016-08-17 14:10 ` Heiko Stübner
2016-08-17 17:03 ` [PATCH 0/2 v2] ARM: dts: rockchip: correct the regulators in " Randy Li
2016-08-17 17:03 ` Randy Li
2016-08-17 17:03 ` [PATCH 1/2] ARM: dts: rockchip: remove excess sd properties for " Randy Li
2016-08-17 17:03 ` Randy Li
2016-08-18 13:35 ` Heiko Stübner
2016-08-18 13:35 ` Heiko Stübner
2016-08-18 13:35 ` Heiko Stübner
2016-08-18 14:20 ` ayaka [this message]
2016-08-18 14:20 ` ayaka
2016-08-17 17:03 ` [PATCH 2/2] ARM: dts: rockchip: add missing regulators for firefly reload board Randy Li
2016-08-17 17:03 ` Randy Li
2016-08-17 17:03 ` Randy Li
2016-08-18 16:47 ` Heiko Stübner
2016-08-18 16:47 ` Heiko Stübner
2016-08-18 16:47 ` Heiko Stübner
2016-08-14 11:27 ` Randy Li
2016-08-14 11:27 ` Randy Li
2016-08-14 11:27 ` Randy Li
2016-07-06 15:25 ` [PATCH 3/3] ARM: dts: add rk3288-firefly-reload ayaka
2016-07-06 15:25 ` ayaka
2016-07-06 15:25 ` ayaka
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=e28a9479-acbe-80f9-0985-d8f084b55245@soulik.info \
--to=ayaka@soulik.info \
--cc=devicetree@vger.kernel.org \
--cc=heiko@sntech.de \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-rockchip@lists.infradead.org \
--cc=linux@armlinux.org.uk \
--cc=mark.rutland@arm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.