All of lore.kernel.org
 help / color / mirror / Atom feed
From: Vidya Srinivas <vidya.srinivas@intel.com>
To: intel-gfx@lists.freedesktop.org
Cc: jani.nikula@intel.com, Vidya Srinivas <vidya.srinivas@intel.com>
Subject: [PATCH 9/9] drm/i915/bxt: Fix the DSI enable sequence
Date: Wed,  8 Feb 2017 16:20:58 +0530	[thread overview]
Message-ID: <1486551058-22596-10-git-send-email-vidya.srinivas@intel.com> (raw)
In-Reply-To: <1486551058-22596-1-git-send-email-vidya.srinivas@intel.com>

From: Uma Shankar <uma.shankar@intel.com>

Device ready to be done after panel power on and before
sending the OTP commands. Patch fixes the enable sequence
as per this.

Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Vidya Srinivas <vidya.srinivas@intel.com>
---
 drivers/gpu/drm/i915/intel_dsi.c           | 12 ++++++++++++
 drivers/gpu/drm/i915/intel_dsi_panel_vbt.c |  4 +---
 2 files changed, 13 insertions(+), 3 deletions(-)

diff --git a/drivers/gpu/drm/i915/intel_dsi.c b/drivers/gpu/drm/i915/intel_dsi.c
index 60ca0b9..ac02fd8 100644
--- a/drivers/gpu/drm/i915/intel_dsi.c
+++ b/drivers/gpu/drm/i915/intel_dsi.c
@@ -568,6 +568,12 @@ static void intel_dsi_pre_enable(struct intel_encoder *encoder,
 
 	intel_dsi_prepare(encoder, pipe_config);
 
+	if (IS_BROXTON(dev_priv)) {
+		/* Panel Enable */
+		drm_panel_power_on(intel_dsi->panel);
+		msleep(intel_dsi->panel_on_delay);
+	}
+
 	/* Panel Enable over CRC PMIC */
 	if (intel_dsi->gpio_panel)
 		gpiod_set_value_cansleep(intel_dsi->gpio_panel, 1);
@@ -586,6 +592,12 @@ static void intel_dsi_pre_enable(struct intel_encoder *encoder,
 	/* put device in ready state */
 	intel_dsi_device_ready(encoder);
 
+	if (IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv)) {
+		/* Panel Enable */
+		drm_panel_power_on(intel_dsi->panel);
+		msleep(intel_dsi->panel_on_delay);
+	}
+
 	drm_panel_prepare(intel_dsi->panel);
 
 	for_each_dsi_port(port, intel_dsi->ports)
diff --git a/drivers/gpu/drm/i915/intel_dsi_panel_vbt.c b/drivers/gpu/drm/i915/intel_dsi_panel_vbt.c
index 4279279..aa73d22 100644
--- a/drivers/gpu/drm/i915/intel_dsi_panel_vbt.c
+++ b/drivers/gpu/drm/i915/intel_dsi_panel_vbt.c
@@ -493,9 +493,6 @@ static void generic_exec_sequence(struct drm_panel *panel, enum mipi_seq seq_id)
 
 static int vbt_panel_prepare(struct drm_panel *panel)
 {
-	generic_exec_sequence(panel, MIPI_SEQ_ASSERT_RESET);
-	generic_exec_sequence(panel, MIPI_SEQ_POWER_ON);
-	generic_exec_sequence(panel, MIPI_SEQ_DEASSERT_RESET);
 	generic_exec_sequence(panel, MIPI_SEQ_INIT_OTP);
 
 	return 0;
@@ -550,6 +547,7 @@ static int vbt_panel_get_modes(struct drm_panel *panel)
 static int vbt_panel_power_on(struct drm_panel *panel)
 {
 	generic_exec_sequence(panel, MIPI_SEQ_POWER_ON);
+	generic_exec_sequence(panel, MIPI_SEQ_ASSERT_RESET);
 	return 0;
 }
 
-- 
1.9.1

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

  parent reply	other threads:[~2017-02-08 10:39 UTC|newest]

Thread overview: 31+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-02-08 10:50 [PATCH 0/9] Broxton DSI dual-link and sequence fixes Vidya Srinivas
2017-02-08 10:50 ` [PATCH 1/9] drm/i915: Check for platform specific GPIO config Vidya Srinivas
2017-02-15 18:05   ` Bob Paauwe
2017-02-08 10:50 ` [PATCH 2/9] drm/i915: Fix PLL 8x/3 divider for MIPI video mode Vidya Srinivas
2017-02-15 15:34   ` Jani Nikula
2017-02-08 10:50 ` [PATCH 3/9] drm: Add DSI panel power on/off sequence programming Vidya Srinivas
2017-02-08 10:50 ` [PATCH 4/9] drm/i915: Add DSI panel power on/off sequence callbacks Vidya Srinivas
2017-02-15 18:44   ` Bob Paauwe
2017-02-08 10:50 ` [PATCH 5/9] drm/i915/bxt: Fix BXT DSI ULPS sequence Vidya Srinivas
2017-02-15 18:11   ` Bob Paauwe
2017-02-16 15:23     ` Jani Nikula
2017-02-08 10:50 ` [PATCH 6/9] drm/i915/bxt: Fix BXT DSI disable sequence Vidya Srinivas
2017-02-15 18:24   ` Bob Paauwe
2017-02-20  9:39     ` Srinivas, Vidya
2017-02-08 10:50 ` [PATCH 7/9] drm/i915/bxt: Disable device ready before shutdown command Vidya Srinivas
2017-02-15 18:27   ` Bob Paauwe
2017-02-16 15:23     ` Jani Nikula
2017-02-08 10:50 ` [PATCH 8/9] drm/i915/bxt: Enable BXT DSI dual link Vidya Srinivas
2017-02-15 18:33   ` Bob Paauwe
2017-02-16 15:26     ` Jani Nikula
2017-02-20  9:49       ` Srinivas, Vidya
2017-02-20 11:00         ` Jani Nikula
2017-02-20 11:40           ` Hans de Goede
2017-02-20 11:55             ` Jani Nikula
2017-02-20 19:19             ` Jani Nikula
2017-02-21  6:21               ` Srinivas, Vidya
2017-02-21  7:30                 ` Hans de Goede
2017-02-08 10:50 ` Vidya Srinivas [this message]
2017-02-15 19:00   ` [PATCH 9/9] drm/i915/bxt: Fix the DSI enable sequence Bob Paauwe
2017-02-20  9:43     ` Srinivas, Vidya
2017-02-08 11:02 ` ✓ Fi.CI.BAT: success for Broxton DSI dual-link and sequence fixes Patchwork

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1486551058-22596-10-git-send-email-vidya.srinivas@intel.com \
    --to=vidya.srinivas@intel.com \
    --cc=intel-gfx@lists.freedesktop.org \
    --cc=jani.nikula@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.