From: <sean.wang@mediatek.com>
To: rpurdie@rpsys.net, jacek.anaszewski@gmail.com,
lee.jones@linaro.org, matthias.bgg@gmail.com, pavel@ucw.cz,
robh+dt@kernel.org, mark.rutland@arm.com
Cc: devicetree@vger.kernel.org, linux-leds@vger.kernel.org,
linux-mediatek@lists.infradead.org,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, keyhaede@gmail.com,
Sean Wang <sean.wang@mediatek.com>
Subject: [PATCH v3 0/4] leds: add leds-mt6323 support on MT7623 SoC
Date: Fri, 17 Feb 2017 14:05:56 +0800 [thread overview]
Message-ID: <1487311560-26684-1-git-send-email-sean.wang@mediatek.com> (raw)
From: Sean Wang <sean.wang@mediatek.com>
MT7623 SoC uses MT6323 PMIC as the default power supply
which has LED function insides. The patchset introduces
the LED support for MT6323 with on, off and hardware
dimmed and blinked and it should work on other similar
SoCs if also using MT6323.
Changes since v1:
- fixed typo in the comments
- sorted include directives alphabetically
- applied all register definitions with MT6323 prefix
- removed the redundant structure declaration
- fixed coding style defined in kernel doc format consistently
- added error handling into all the occurrences where regmap APIs
are used
- removed loudly debug message
- made magic constant into meaningful macro
- added missing mutex_destroy when module removed called
- updated module license with GPL
- fixed sparse warnings
Changes since v2:
- fixed the typo in devicetree Documentation
- cleaned up the style and explanation in the comments
- applied all macro/struct/function definitions with MT6323 prefix
- put the logic about the setup from device tree into the function for simplicity
Sean Wang (4):
Documentation: devicetree: Add document bindings for leds-mt6323
Documentation: devicetree: Add LED subnode binding for MT6323 PMIC
leds: Add LED support for MT6323 PMIC
mfd: mt6397: Add MT6323 LED support into MT6397 driver
.../devicetree/bindings/leds/leds-mt6323.txt | 60 +++
Documentation/devicetree/bindings/mfd/mt6397.txt | 4 +
drivers/leds/Kconfig | 8 +
drivers/leds/Makefile | 1 +
drivers/leds/leds-mt6323.c | 470 +++++++++++++++++++++
drivers/mfd/mt6397-core.c | 4 +
6 files changed, 547 insertions(+)
create mode 100644 Documentation/devicetree/bindings/leds/leds-mt6323.txt
create mode 100644 drivers/leds/leds-mt6323.c
--
1.9.1
WARNING: multiple messages have this Message-ID (diff)
From: <sean.wang@mediatek.com>
To: <rpurdie@rpsys.net>, <jacek.anaszewski@gmail.com>,
<lee.jones@linaro.org>, <matthias.bgg@gmail.com>, <pavel@ucw.cz>,
<robh+dt@kernel.org>, <mark.rutland@arm.com>
Cc: <devicetree@vger.kernel.org>, <linux-leds@vger.kernel.org>,
<linux-mediatek@lists.infradead.org>,
<linux-arm-kernel@lists.infradead.org>,
<linux-kernel@vger.kernel.org>, <keyhaede@gmail.com>,
Sean Wang <sean.wang@mediatek.com>
Subject: [PATCH v3 0/4] leds: add leds-mt6323 support on MT7623 SoC
Date: Fri, 17 Feb 2017 14:05:56 +0800 [thread overview]
Message-ID: <1487311560-26684-1-git-send-email-sean.wang@mediatek.com> (raw)
From: Sean Wang <sean.wang@mediatek.com>
MT7623 SoC uses MT6323 PMIC as the default power supply
which has LED function insides. The patchset introduces
the LED support for MT6323 with on, off and hardware
dimmed and blinked and it should work on other similar
SoCs if also using MT6323.
Changes since v1:
- fixed typo in the comments
- sorted include directives alphabetically
- applied all register definitions with MT6323 prefix
- removed the redundant structure declaration
- fixed coding style defined in kernel doc format consistently
- added error handling into all the occurrences where regmap APIs
are used
- removed loudly debug message
- made magic constant into meaningful macro
- added missing mutex_destroy when module removed called
- updated module license with GPL
- fixed sparse warnings
Changes since v2:
- fixed the typo in devicetree Documentation
- cleaned up the style and explanation in the comments
- applied all macro/struct/function definitions with MT6323 prefix
- put the logic about the setup from device tree into the function for simplicity
Sean Wang (4):
Documentation: devicetree: Add document bindings for leds-mt6323
Documentation: devicetree: Add LED subnode binding for MT6323 PMIC
leds: Add LED support for MT6323 PMIC
mfd: mt6397: Add MT6323 LED support into MT6397 driver
.../devicetree/bindings/leds/leds-mt6323.txt | 60 +++
Documentation/devicetree/bindings/mfd/mt6397.txt | 4 +
drivers/leds/Kconfig | 8 +
drivers/leds/Makefile | 1 +
drivers/leds/leds-mt6323.c | 470 +++++++++++++++++++++
drivers/mfd/mt6397-core.c | 4 +
6 files changed, 547 insertions(+)
create mode 100644 Documentation/devicetree/bindings/leds/leds-mt6323.txt
create mode 100644 drivers/leds/leds-mt6323.c
--
1.9.1
WARNING: multiple messages have this Message-ID (diff)
From: sean.wang@mediatek.com (sean.wang at mediatek.com)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v3 0/4] leds: add leds-mt6323 support on MT7623 SoC
Date: Fri, 17 Feb 2017 14:05:56 +0800 [thread overview]
Message-ID: <1487311560-26684-1-git-send-email-sean.wang@mediatek.com> (raw)
From: Sean Wang <sean.wang@mediatek.com>
MT7623 SoC uses MT6323 PMIC as the default power supply
which has LED function insides. The patchset introduces
the LED support for MT6323 with on, off and hardware
dimmed and blinked and it should work on other similar
SoCs if also using MT6323.
Changes since v1:
- fixed typo in the comments
- sorted include directives alphabetically
- applied all register definitions with MT6323 prefix
- removed the redundant structure declaration
- fixed coding style defined in kernel doc format consistently
- added error handling into all the occurrences where regmap APIs
are used
- removed loudly debug message
- made magic constant into meaningful macro
- added missing mutex_destroy when module removed called
- updated module license with GPL
- fixed sparse warnings
Changes since v2:
- fixed the typo in devicetree Documentation
- cleaned up the style and explanation in the comments
- applied all macro/struct/function definitions with MT6323 prefix
- put the logic about the setup from device tree into the function for simplicity
Sean Wang (4):
Documentation: devicetree: Add document bindings for leds-mt6323
Documentation: devicetree: Add LED subnode binding for MT6323 PMIC
leds: Add LED support for MT6323 PMIC
mfd: mt6397: Add MT6323 LED support into MT6397 driver
.../devicetree/bindings/leds/leds-mt6323.txt | 60 +++
Documentation/devicetree/bindings/mfd/mt6397.txt | 4 +
drivers/leds/Kconfig | 8 +
drivers/leds/Makefile | 1 +
drivers/leds/leds-mt6323.c | 470 +++++++++++++++++++++
drivers/mfd/mt6397-core.c | 4 +
6 files changed, 547 insertions(+)
create mode 100644 Documentation/devicetree/bindings/leds/leds-mt6323.txt
create mode 100644 drivers/leds/leds-mt6323.c
--
1.9.1
next reply other threads:[~2017-02-17 6:05 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-02-17 6:05 sean.wang [this message]
2017-02-17 6:05 ` [PATCH v3 0/4] leds: add leds-mt6323 support on MT7623 SoC sean.wang at mediatek.com
2017-02-17 6:05 ` sean.wang
2017-02-17 6:05 ` [PATCH v3 2/4] Documentation: devicetree: Add LED subnode binding for MT6323 PMIC sean.wang
2017-02-17 6:05 ` sean.wang at mediatek.com
2017-02-17 6:05 ` sean.wang
2017-02-17 6:05 ` [PATCH v3 3/4] leds: Add LED support " sean.wang
2017-02-17 6:05 ` sean.wang at mediatek.com
2017-02-17 6:05 ` sean.wang
2017-02-17 21:54 ` Jacek Anaszewski
2017-02-17 21:54 ` Jacek Anaszewski
2017-02-17 21:54 ` Jacek Anaszewski
[not found] ` <1487311560-26684-1-git-send-email-sean.wang-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
2017-02-17 6:05 ` [PATCH v3 1/4] Documentation: devicetree: Add document bindings for leds-mt6323 sean.wang-NuS5LvNUpcJWk0Htik3J/w
2017-02-17 6:05 ` sean.wang at mediatek.com
2017-02-17 6:05 ` sean.wang
2017-02-17 21:54 ` Jacek Anaszewski
2017-02-17 21:54 ` Jacek Anaszewski
2017-02-17 21:54 ` Jacek Anaszewski
2017-02-17 6:06 ` [PATCH v3 4/4] mfd: mt6397: Add MT6323 LED support into MT6397 driver sean.wang-NuS5LvNUpcJWk0Htik3J/w
2017-02-17 6:06 ` sean.wang at mediatek.com
2017-02-17 6:06 ` sean.wang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1487311560-26684-1-git-send-email-sean.wang@mediatek.com \
--to=sean.wang@mediatek.com \
--cc=devicetree@vger.kernel.org \
--cc=jacek.anaszewski@gmail.com \
--cc=keyhaede@gmail.com \
--cc=lee.jones@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-leds@vger.kernel.org \
--cc=linux-mediatek@lists.infradead.org \
--cc=mark.rutland@arm.com \
--cc=matthias.bgg@gmail.com \
--cc=pavel@ucw.cz \
--cc=robh+dt@kernel.org \
--cc=rpurdie@rpsys.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.