From: <sean.wang@mediatek.com>
To: rpurdie@rpsys.net, jacek.anaszewski@gmail.com,
lee.jones@linaro.org, matthias.bgg@gmail.com, pavel@ucw.cz,
robh+dt@kernel.org, mark.rutland@arm.com
Cc: devicetree@vger.kernel.org, linux-leds@vger.kernel.org,
linux-mediatek@lists.infradead.org,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, keyhaede@gmail.com,
Sean Wang <sean.wang@mediatek.com>
Subject: [PATCH v3 3/4] leds: Add LED support for MT6323 PMIC
Date: Fri, 17 Feb 2017 14:05:59 +0800 [thread overview]
Message-ID: <1487311560-26684-4-git-send-email-sean.wang@mediatek.com> (raw)
In-Reply-To: <1487311560-26684-1-git-send-email-sean.wang@mediatek.com>
From: Sean Wang <sean.wang@mediatek.com>
MT6323 PMIC is a multi-function device that includes
LED function. It allows attaching up to 4 LEDs which
can either be on, off or dimmed and/or blinked with
the controller.
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
---
drivers/leds/Kconfig | 8 +
drivers/leds/Makefile | 1 +
drivers/leds/leds-mt6323.c | 470 +++++++++++++++++++++++++++++++++++++++++++++
3 files changed, 479 insertions(+)
create mode 100644 drivers/leds/leds-mt6323.c
diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig
index c621cbb..30095fc 100644
--- a/drivers/leds/Kconfig
+++ b/drivers/leds/Kconfig
@@ -117,6 +117,14 @@ config LEDS_MIKROTIK_RB532
This option enables support for the so called "User LED" of
Mikrotik's Routerboard 532.
+config LEDS_MT6323
+ tristate "LED Support for Mediatek MT6323 PMIC"
+ depends on LEDS_CLASS
+ depends on MFD_MT6397
+ help
+ This option enables support for on-chip LED drivers found on
+ Mediatek MT6323 PMIC.
+
config LEDS_S3C24XX
tristate "LED Support for Samsung S3C24XX GPIO LEDs"
depends on LEDS_CLASS
diff --git a/drivers/leds/Makefile b/drivers/leds/Makefile
index 6b82737..4feb332 100644
--- a/drivers/leds/Makefile
+++ b/drivers/leds/Makefile
@@ -72,6 +72,7 @@ obj-$(CONFIG_LEDS_IS31FL32XX) += leds-is31fl32xx.o
obj-$(CONFIG_LEDS_PM8058) += leds-pm8058.o
obj-$(CONFIG_LEDS_MLXCPLD) += leds-mlxcpld.o
obj-$(CONFIG_LEDS_NIC78BX) += leds-nic78bx.o
+obj-$(CONFIG_LEDS_MT6323) += leds-mt6323.o
# LED SPI Drivers
obj-$(CONFIG_LEDS_DAC124S085) += leds-dac124s085.o
diff --git a/drivers/leds/leds-mt6323.c b/drivers/leds/leds-mt6323.c
new file mode 100644
index 0000000..f431b1d
--- /dev/null
+++ b/drivers/leds/leds-mt6323.c
@@ -0,0 +1,470 @@
+/*
+ * LED driver for Mediatek MT6323 PMIC
+ *
+ * Copyright (C) 2017 Sean Wang <sean.wang@mediatek.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+#include <linux/kernel.h>
+#include <linux/leds.h>
+#include <linux/mfd/mt6323/registers.h>
+#include <linux/mfd/mt6397/core.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+
+/*
+ * Register field for MT6323_TOP_CKPDN0 to enable
+ * 32K clock common for LED device.
+ */
+#define MT6323_RG_DRV_32K_CK_PDN BIT(11)
+#define MT6323_RG_DRV_32K_CK_PDN_MASK BIT(11)
+
+/*
+ * Register field for MT6323_TOP_CKPDN2 to enable
+ * individual clock for LED device.
+ */
+#define MT6323_RG_ISINK_CK_PDN(i) BIT(i)
+#define MT6323_RG_ISINK_CK_PDN_MASK(i) BIT(i)
+
+/*
+ * Register field for MT6323_TOP_CKCON1 to select
+ * clock source.
+ */
+#define MT6323_RG_ISINK_CK_SEL_MASK(i) (BIT(10) << (i))
+
+/*
+ * Register for MT6323_ISINK_CON0 to setup the
+ * duty cycle of the blink.
+ */
+#define MT6323_ISINK_CON0(i) (MT6323_ISINK0_CON0 + 0x8 * (i))
+#define MT6323_ISINK_DIM_DUTY_MASK (0x1f << 8)
+#define MT6323_ISINK_DIM_DUTY(i) (((i) << 8) & \
+ MT6323_ISINK_DIM_DUTY_MASK)
+
+/* Register to setup the period of the blink. */
+#define MT6323_ISINK_CON1(i) (MT6323_ISINK0_CON1 + 0x8 * (i))
+#define MT6323_ISINK_DIM_FSEL_MASK (0xffff)
+#define MT6323_ISINK_DIM_FSEL(i) ((i) & MT6323_ISINK_DIM_FSEL_MASK)
+
+/* Register to control the brightness. */
+#define MT6323_ISINK_CON2(i) (MT6323_ISINK0_CON2 + 0x8 * (i))
+#define MT6323_ISINK_CH_STEP_SHIFT 12
+#define MT6323_ISINK_CH_STEP_MASK (0x7 << 12)
+#define MT6323_ISINK_CH_STEP(i) (((i) << 12) & \
+ MT6323_ISINK_CH_STEP_MASK)
+#define MT6323_ISINK_SFSTR0_TC_MASK (0x3 << 1)
+#define MT6323_ISINK_SFSTR0_TC(i) (((i) << 1) & \
+ MT6323_ISINK_SFSTR0_TC_MASK)
+#define MT6323_ISINK_SFSTR0_EN_MASK BIT(0)
+#define MT6323_ISINK_SFSTR0_EN BIT(0)
+
+/* Register to LED channel enablement. */
+#define MT6323_ISINK_CH_EN_MASK(i) BIT(i)
+#define MT6323_ISINK_CH_EN(i) BIT(i)
+
+#define MT6323_MAX_PERIOD 10000
+#define MT6323_MAX_LEDS 4
+#define MT6323_MAX_BRIGHTNESS 6
+#define MT6323_UNIT_DUTY 3125
+
+struct mt6323_leds;
+
+/**
+ * struct mt6323_led - state container for the LED device
+ * @id: the identifier in MT6323 LED device
+ * @parent: the pointer to MT6323 LED controller
+ * @cdev: LED class device for this LED device
+ * @current_brightness: current state of the LED device
+ */
+struct mt6323_led {
+ int id;
+ struct mt6323_leds *parent;
+ struct led_classdev cdev;
+ u8 current_brightness;
+};
+
+/**
+ * struct mt6323_leds - state container for holding LED controller
+ * of the driver
+ * @dev: the device pointer
+ * @hw: the underlying hardware providing shared
+ * bus for the register operations
+ * @led_num: how much the LED device the controller could control
+ * @lock: the lock among process context
+ * @led: the array that contains the state of individual
+ * LED device
+ */
+struct mt6323_leds {
+ struct device *dev;
+ struct mt6397_chip *hw;
+ u8 led_num;
+ /* protect among process context */
+ struct mutex lock;
+ struct mt6323_led led[MT6323_MAX_LEDS];
+};
+
+static int mt6323_led_hw_off(struct led_classdev *cdev)
+{
+ struct mt6323_led *led = container_of(cdev, struct mt6323_led, cdev);
+ struct mt6323_leds *leds = led->parent;
+ struct regmap *regmap = leds->hw->regmap;
+ unsigned int status;
+ int ret;
+
+ status = MT6323_ISINK_CH_EN(led->id);
+ ret = regmap_update_bits(regmap, MT6323_ISINK_EN_CTRL,
+ MT6323_ISINK_CH_EN_MASK(led->id), ~status);
+ if (ret < 0)
+ return ret;
+
+ usleep_range(100, 300);
+ ret = regmap_update_bits(regmap, MT6323_TOP_CKPDN2,
+ MT6323_RG_ISINK_CK_PDN_MASK(led->id),
+ MT6323_RG_ISINK_CK_PDN(led->id));
+ if (ret < 0)
+ return ret;
+
+ return 0;
+}
+
+static int mt6323_get_led_hw_brightness(struct led_classdev *cdev)
+{
+ struct mt6323_led *led = container_of(cdev, struct mt6323_led, cdev);
+ struct mt6323_leds *leds = led->parent;
+ struct regmap *regmap = leds->hw->regmap;
+ unsigned int status;
+ int ret;
+
+ ret = regmap_read(regmap, MT6323_TOP_CKPDN2, &status);
+ if (ret < 0)
+ return ret;
+
+ if (status & MT6323_RG_ISINK_CK_PDN_MASK(led->id))
+ return 0;
+
+ ret = regmap_read(regmap, MT6323_ISINK_EN_CTRL, &status);
+ if (ret < 0)
+ return ret;
+
+ if (!(status & MT6323_ISINK_CH_EN(led->id)))
+ return 0;
+
+ ret = regmap_read(regmap, MT6323_ISINK_CON2(led->id), &status);
+ if (ret < 0)
+ return ret;
+
+ return ((status & MT6323_ISINK_CH_STEP_MASK)
+ >> MT6323_ISINK_CH_STEP_SHIFT) + 1;
+}
+
+static int mt6323_led_hw_on(struct led_classdev *cdev)
+{
+ struct mt6323_led *led = container_of(cdev, struct mt6323_led, cdev);
+ struct mt6323_leds *leds = led->parent;
+ struct regmap *regmap = leds->hw->regmap;
+ unsigned int status;
+ int ret;
+
+ /*
+ * Setup required clock source, enable the corresponding
+ * clock and channel and let work with continuous blink as
+ * the default.
+ */
+ ret = regmap_update_bits(regmap, MT6323_TOP_CKCON1,
+ MT6323_RG_ISINK_CK_SEL_MASK(led->id), 0);
+ if (ret < 0)
+ return ret;
+
+ status = MT6323_RG_ISINK_CK_PDN(led->id);
+ ret = regmap_update_bits(regmap, MT6323_TOP_CKPDN2,
+ MT6323_RG_ISINK_CK_PDN_MASK(led->id),
+ ~status);
+ if (ret < 0)
+ return ret;
+
+ usleep_range(100, 300);
+
+ ret = regmap_update_bits(regmap, MT6323_ISINK_EN_CTRL,
+ MT6323_ISINK_CH_EN_MASK(led->id),
+ MT6323_ISINK_CH_EN(led->id));
+ if (ret < 0)
+ return ret;
+
+ ret = regmap_update_bits(regmap, MT6323_ISINK_CON2(led->id),
+ MT6323_ISINK_CH_STEP_MASK,
+ MT6323_ISINK_CH_STEP(1));
+ if (ret < 0)
+ return ret;
+
+ ret = regmap_update_bits(regmap, MT6323_ISINK_CON0(led->id),
+ MT6323_ISINK_DIM_DUTY_MASK,
+ MT6323_ISINK_DIM_DUTY(31));
+ if (ret < 0)
+ return ret;
+
+ ret = regmap_update_bits(regmap, MT6323_ISINK_CON1(led->id),
+ MT6323_ISINK_DIM_FSEL_MASK,
+ MT6323_ISINK_DIM_FSEL(1000));
+ if (ret < 0)
+ return ret;
+
+ led->current_brightness = 1;
+
+ return 0;
+}
+
+static int mt6323_led_set_blink(struct led_classdev *cdev,
+ unsigned long *delay_on,
+ unsigned long *delay_off)
+{
+ struct mt6323_led *led = container_of(cdev, struct mt6323_led, cdev);
+ struct mt6323_leds *leds = led->parent;
+ struct regmap *regmap = leds->hw->regmap;
+ u16 period;
+ u8 duty_cycle, duty_hw;
+ int ret;
+
+ /*
+ * Units are in ms, if over the hardware able
+ * to support, fallback into software blink.
+ */
+ if (*delay_on + *delay_off > MT6323_MAX_PERIOD)
+ return -EINVAL;
+
+ /*
+ * LED subsystem requires a default user
+ * friendly blink pattern for the LED so using
+ * 1Hz duty cycle 50% here if without specific
+ * value delay_on and delay off being assigned.
+ */
+ if (*delay_on == 0 && *delay_off == 0) {
+ *delay_on = 500;
+ *delay_off = 500;
+ }
+
+ period = *delay_on + *delay_off;
+
+ /*
+ * duty_cycle is the percentage of period during
+ * which the led is ON.
+ */
+ duty_cycle = 100 * (*delay_on) / period;
+
+ mutex_lock(&leds->lock);
+
+ if (!led->current_brightness) {
+ ret = mt6323_led_hw_on(cdev);
+ if (ret < 0)
+ goto out;
+ }
+
+ duty_hw = DIV_ROUND_CLOSEST(duty_cycle * 1000, MT6323_UNIT_DUTY);
+ ret = regmap_update_bits(regmap, MT6323_ISINK_CON0(led->id),
+ MT6323_ISINK_DIM_DUTY_MASK,
+ MT6323_ISINK_DIM_DUTY(duty_hw));
+ if (ret < 0)
+ goto out;
+
+ ret = regmap_update_bits(regmap, MT6323_ISINK_CON1(led->id),
+ MT6323_ISINK_DIM_FSEL_MASK,
+ MT6323_ISINK_DIM_FSEL(period - 1));
+out:
+ mutex_unlock(&leds->lock);
+
+ return ret;
+}
+
+static int mt6323_led_set_brightness(struct led_classdev *cdev,
+ enum led_brightness brightness)
+{
+ struct mt6323_led *led = container_of(cdev, struct mt6323_led, cdev);
+ struct mt6323_leds *leds = led->parent;
+ struct regmap *regmap = leds->hw->regmap;
+ int ret;
+
+ mutex_lock(&leds->lock);
+
+ if (!led->current_brightness && brightness) {
+ ret = mt6323_led_hw_on(cdev);
+ if (ret < 0)
+ goto out;
+ }
+
+ if (brightness) {
+ /*
+ * Setup current output for the corresponding
+ * brightness level.
+ */
+ ret = regmap_update_bits(regmap, MT6323_ISINK_CON2(led->id),
+ MT6323_ISINK_CH_STEP_MASK,
+ MT6323_ISINK_CH_STEP(brightness - 1));
+ if (ret < 0)
+ goto out;
+
+ ret = regmap_update_bits(regmap, MT6323_ISINK_CON2(led->id),
+ MT6323_ISINK_SFSTR0_TC_MASK |
+ MT6323_ISINK_SFSTR0_EN_MASK,
+ MT6323_ISINK_SFSTR0_TC(2) |
+ MT6323_ISINK_SFSTR0_EN);
+ if (ret < 0)
+ goto out;
+ } else {
+ ret = mt6323_led_hw_off(cdev);
+ if (ret < 0)
+ goto out;
+ }
+
+ led->current_brightness = brightness;
+out:
+ mutex_unlock(&leds->lock);
+
+ return ret;
+}
+
+static int mt6323_led_set_dt_default(struct led_classdev *cdev,
+ struct device_node *np)
+{
+ struct mt6323_led *led = container_of(cdev, struct mt6323_led, cdev);
+ const char *state;
+ int ret;
+
+ led->cdev.name = of_get_property(np, "label", NULL) ? : np->name;
+ led->cdev.default_trigger = of_get_property(np,
+ "linux,default-trigger",
+ NULL);
+
+ state = of_get_property(np, "default-state", NULL);
+ if (state) {
+ if (!strcmp(state, "keep")) {
+ ret = mt6323_get_led_hw_brightness(cdev);
+ if (ret < 0)
+ return ret;
+ led->current_brightness = ret;
+ } else if (!strcmp(state, "on")) {
+ mt6323_led_set_brightness(cdev, 1);
+ } else {
+ mt6323_led_set_brightness(cdev, 0);
+ }
+ }
+
+ return 0;
+}
+
+static int mt6323_led_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct device_node *np = pdev->dev.of_node;
+ struct device_node *child;
+ struct mt6397_chip *hw = dev_get_drvdata(pdev->dev.parent);
+ struct mt6323_leds *leds;
+ int ret, i = 0, count;
+ unsigned int status;
+
+ count = of_get_child_count(np);
+ if (!count)
+ return -ENODEV;
+
+ count = (count <= MT6323_MAX_LEDS) ? count : MT6323_MAX_LEDS;
+
+ leds = devm_kzalloc(dev, sizeof(struct mt6323_leds) +
+ sizeof(struct mt6323_led) * count,
+ GFP_KERNEL);
+ if (!leds)
+ return -ENOMEM;
+
+ platform_set_drvdata(pdev, leds);
+ leds->dev = dev;
+
+ /*
+ * leds->hw points to the underlying bus for the register
+ * controlled.
+ */
+ leds->hw = hw;
+ mutex_init(&leds->lock);
+ leds->led_num = count;
+
+ status = MT6323_RG_DRV_32K_CK_PDN;
+ ret = regmap_update_bits(leds->hw->regmap, MT6323_TOP_CKPDN0,
+ MT6323_RG_DRV_32K_CK_PDN_MASK, ~status);
+ if (ret < 0) {
+ dev_err(leds->dev,
+ "Failed to update MT6323_TOP_CKPDN0 Register\n");
+ return ret;
+ }
+
+ for_each_available_child_of_node(np, child) {
+ leds->led[i].cdev.max_brightness = MT6323_MAX_BRIGHTNESS;
+ leds->led[i].cdev.brightness_set_blocking =
+ mt6323_led_set_brightness;
+ leds->led[i].cdev.blink_set = mt6323_led_set_blink;
+ leds->led[i].id = i;
+ leds->led[i].parent = leds;
+
+ ret = mt6323_led_set_dt_default(&leds->led[i].cdev, child);
+ if (ret < 0) {
+ dev_err(leds->dev,
+ "Failed to LED set default from devicetree\n");
+ return ret;
+ }
+
+ ret = devm_led_classdev_register(dev, &leds->led[i].cdev);
+ if (ret) {
+ dev_err(&pdev->dev, "Failed to register LED: %d\n",
+ ret);
+ return ret;
+ }
+ leds->led[i].cdev.dev->of_node = child;
+ i++;
+ }
+
+ return 0;
+}
+
+static int mt6323_led_remove(struct platform_device *pdev)
+{
+ struct mt6323_leds *leds = platform_get_drvdata(pdev);
+ int i;
+
+ /* Turn the LEDs off on driver removal. */
+ for (i = 0 ; i < leds->led_num ; i++)
+ mt6323_led_hw_off(&leds->led[i].cdev);
+
+ regmap_update_bits(leds->hw->regmap, MT6323_TOP_CKPDN0,
+ MT6323_RG_DRV_32K_CK_PDN_MASK,
+ MT6323_RG_DRV_32K_CK_PDN);
+
+ mutex_destroy(&leds->lock);
+
+ return 0;
+}
+
+static const struct of_device_id mt6323_led_dt_match[] = {
+ { .compatible = "mediatek,mt6323-led" },
+ {},
+};
+MODULE_DEVICE_TABLE(of, mt6323_led_dt_match);
+
+static struct platform_driver mt6323_led_driver = {
+ .probe = mt6323_led_probe,
+ .remove = mt6323_led_remove,
+ .driver = {
+ .name = "mt6323-led",
+ .of_match_table = mt6323_led_dt_match,
+ },
+};
+
+module_platform_driver(mt6323_led_driver);
+
+MODULE_DESCRIPTION("LED driver for Mediatek MT6323 PMIC");
+MODULE_AUTHOR("Sean Wang <sean.wang@mediatek.com>");
+MODULE_LICENSE("GPL");
--
1.9.1
WARNING: multiple messages have this Message-ID (diff)
From: <sean.wang@mediatek.com>
To: <rpurdie@rpsys.net>, <jacek.anaszewski@gmail.com>,
<lee.jones@linaro.org>, <matthias.bgg@gmail.com>, <pavel@ucw.cz>,
<robh+dt@kernel.org>, <mark.rutland@arm.com>
Cc: <devicetree@vger.kernel.org>, <linux-leds@vger.kernel.org>,
<linux-mediatek@lists.infradead.org>,
<linux-arm-kernel@lists.infradead.org>,
<linux-kernel@vger.kernel.org>, <keyhaede@gmail.com>,
Sean Wang <sean.wang@mediatek.com>
Subject: [PATCH v3 3/4] leds: Add LED support for MT6323 PMIC
Date: Fri, 17 Feb 2017 14:05:59 +0800 [thread overview]
Message-ID: <1487311560-26684-4-git-send-email-sean.wang@mediatek.com> (raw)
In-Reply-To: <1487311560-26684-1-git-send-email-sean.wang@mediatek.com>
From: Sean Wang <sean.wang@mediatek.com>
MT6323 PMIC is a multi-function device that includes
LED function. It allows attaching up to 4 LEDs which
can either be on, off or dimmed and/or blinked with
the controller.
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
---
drivers/leds/Kconfig | 8 +
drivers/leds/Makefile | 1 +
drivers/leds/leds-mt6323.c | 470 +++++++++++++++++++++++++++++++++++++++++++++
3 files changed, 479 insertions(+)
create mode 100644 drivers/leds/leds-mt6323.c
diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig
index c621cbb..30095fc 100644
--- a/drivers/leds/Kconfig
+++ b/drivers/leds/Kconfig
@@ -117,6 +117,14 @@ config LEDS_MIKROTIK_RB532
This option enables support for the so called "User LED" of
Mikrotik's Routerboard 532.
+config LEDS_MT6323
+ tristate "LED Support for Mediatek MT6323 PMIC"
+ depends on LEDS_CLASS
+ depends on MFD_MT6397
+ help
+ This option enables support for on-chip LED drivers found on
+ Mediatek MT6323 PMIC.
+
config LEDS_S3C24XX
tristate "LED Support for Samsung S3C24XX GPIO LEDs"
depends on LEDS_CLASS
diff --git a/drivers/leds/Makefile b/drivers/leds/Makefile
index 6b82737..4feb332 100644
--- a/drivers/leds/Makefile
+++ b/drivers/leds/Makefile
@@ -72,6 +72,7 @@ obj-$(CONFIG_LEDS_IS31FL32XX) += leds-is31fl32xx.o
obj-$(CONFIG_LEDS_PM8058) += leds-pm8058.o
obj-$(CONFIG_LEDS_MLXCPLD) += leds-mlxcpld.o
obj-$(CONFIG_LEDS_NIC78BX) += leds-nic78bx.o
+obj-$(CONFIG_LEDS_MT6323) += leds-mt6323.o
# LED SPI Drivers
obj-$(CONFIG_LEDS_DAC124S085) += leds-dac124s085.o
diff --git a/drivers/leds/leds-mt6323.c b/drivers/leds/leds-mt6323.c
new file mode 100644
index 0000000..f431b1d
--- /dev/null
+++ b/drivers/leds/leds-mt6323.c
@@ -0,0 +1,470 @@
+/*
+ * LED driver for Mediatek MT6323 PMIC
+ *
+ * Copyright (C) 2017 Sean Wang <sean.wang@mediatek.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+#include <linux/kernel.h>
+#include <linux/leds.h>
+#include <linux/mfd/mt6323/registers.h>
+#include <linux/mfd/mt6397/core.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+
+/*
+ * Register field for MT6323_TOP_CKPDN0 to enable
+ * 32K clock common for LED device.
+ */
+#define MT6323_RG_DRV_32K_CK_PDN BIT(11)
+#define MT6323_RG_DRV_32K_CK_PDN_MASK BIT(11)
+
+/*
+ * Register field for MT6323_TOP_CKPDN2 to enable
+ * individual clock for LED device.
+ */
+#define MT6323_RG_ISINK_CK_PDN(i) BIT(i)
+#define MT6323_RG_ISINK_CK_PDN_MASK(i) BIT(i)
+
+/*
+ * Register field for MT6323_TOP_CKCON1 to select
+ * clock source.
+ */
+#define MT6323_RG_ISINK_CK_SEL_MASK(i) (BIT(10) << (i))
+
+/*
+ * Register for MT6323_ISINK_CON0 to setup the
+ * duty cycle of the blink.
+ */
+#define MT6323_ISINK_CON0(i) (MT6323_ISINK0_CON0 + 0x8 * (i))
+#define MT6323_ISINK_DIM_DUTY_MASK (0x1f << 8)
+#define MT6323_ISINK_DIM_DUTY(i) (((i) << 8) & \
+ MT6323_ISINK_DIM_DUTY_MASK)
+
+/* Register to setup the period of the blink. */
+#define MT6323_ISINK_CON1(i) (MT6323_ISINK0_CON1 + 0x8 * (i))
+#define MT6323_ISINK_DIM_FSEL_MASK (0xffff)
+#define MT6323_ISINK_DIM_FSEL(i) ((i) & MT6323_ISINK_DIM_FSEL_MASK)
+
+/* Register to control the brightness. */
+#define MT6323_ISINK_CON2(i) (MT6323_ISINK0_CON2 + 0x8 * (i))
+#define MT6323_ISINK_CH_STEP_SHIFT 12
+#define MT6323_ISINK_CH_STEP_MASK (0x7 << 12)
+#define MT6323_ISINK_CH_STEP(i) (((i) << 12) & \
+ MT6323_ISINK_CH_STEP_MASK)
+#define MT6323_ISINK_SFSTR0_TC_MASK (0x3 << 1)
+#define MT6323_ISINK_SFSTR0_TC(i) (((i) << 1) & \
+ MT6323_ISINK_SFSTR0_TC_MASK)
+#define MT6323_ISINK_SFSTR0_EN_MASK BIT(0)
+#define MT6323_ISINK_SFSTR0_EN BIT(0)
+
+/* Register to LED channel enablement. */
+#define MT6323_ISINK_CH_EN_MASK(i) BIT(i)
+#define MT6323_ISINK_CH_EN(i) BIT(i)
+
+#define MT6323_MAX_PERIOD 10000
+#define MT6323_MAX_LEDS 4
+#define MT6323_MAX_BRIGHTNESS 6
+#define MT6323_UNIT_DUTY 3125
+
+struct mt6323_leds;
+
+/**
+ * struct mt6323_led - state container for the LED device
+ * @id: the identifier in MT6323 LED device
+ * @parent: the pointer to MT6323 LED controller
+ * @cdev: LED class device for this LED device
+ * @current_brightness: current state of the LED device
+ */
+struct mt6323_led {
+ int id;
+ struct mt6323_leds *parent;
+ struct led_classdev cdev;
+ u8 current_brightness;
+};
+
+/**
+ * struct mt6323_leds - state container for holding LED controller
+ * of the driver
+ * @dev: the device pointer
+ * @hw: the underlying hardware providing shared
+ * bus for the register operations
+ * @led_num: how much the LED device the controller could control
+ * @lock: the lock among process context
+ * @led: the array that contains the state of individual
+ * LED device
+ */
+struct mt6323_leds {
+ struct device *dev;
+ struct mt6397_chip *hw;
+ u8 led_num;
+ /* protect among process context */
+ struct mutex lock;
+ struct mt6323_led led[MT6323_MAX_LEDS];
+};
+
+static int mt6323_led_hw_off(struct led_classdev *cdev)
+{
+ struct mt6323_led *led = container_of(cdev, struct mt6323_led, cdev);
+ struct mt6323_leds *leds = led->parent;
+ struct regmap *regmap = leds->hw->regmap;
+ unsigned int status;
+ int ret;
+
+ status = MT6323_ISINK_CH_EN(led->id);
+ ret = regmap_update_bits(regmap, MT6323_ISINK_EN_CTRL,
+ MT6323_ISINK_CH_EN_MASK(led->id), ~status);
+ if (ret < 0)
+ return ret;
+
+ usleep_range(100, 300);
+ ret = regmap_update_bits(regmap, MT6323_TOP_CKPDN2,
+ MT6323_RG_ISINK_CK_PDN_MASK(led->id),
+ MT6323_RG_ISINK_CK_PDN(led->id));
+ if (ret < 0)
+ return ret;
+
+ return 0;
+}
+
+static int mt6323_get_led_hw_brightness(struct led_classdev *cdev)
+{
+ struct mt6323_led *led = container_of(cdev, struct mt6323_led, cdev);
+ struct mt6323_leds *leds = led->parent;
+ struct regmap *regmap = leds->hw->regmap;
+ unsigned int status;
+ int ret;
+
+ ret = regmap_read(regmap, MT6323_TOP_CKPDN2, &status);
+ if (ret < 0)
+ return ret;
+
+ if (status & MT6323_RG_ISINK_CK_PDN_MASK(led->id))
+ return 0;
+
+ ret = regmap_read(regmap, MT6323_ISINK_EN_CTRL, &status);
+ if (ret < 0)
+ return ret;
+
+ if (!(status & MT6323_ISINK_CH_EN(led->id)))
+ return 0;
+
+ ret = regmap_read(regmap, MT6323_ISINK_CON2(led->id), &status);
+ if (ret < 0)
+ return ret;
+
+ return ((status & MT6323_ISINK_CH_STEP_MASK)
+ >> MT6323_ISINK_CH_STEP_SHIFT) + 1;
+}
+
+static int mt6323_led_hw_on(struct led_classdev *cdev)
+{
+ struct mt6323_led *led = container_of(cdev, struct mt6323_led, cdev);
+ struct mt6323_leds *leds = led->parent;
+ struct regmap *regmap = leds->hw->regmap;
+ unsigned int status;
+ int ret;
+
+ /*
+ * Setup required clock source, enable the corresponding
+ * clock and channel and let work with continuous blink as
+ * the default.
+ */
+ ret = regmap_update_bits(regmap, MT6323_TOP_CKCON1,
+ MT6323_RG_ISINK_CK_SEL_MASK(led->id), 0);
+ if (ret < 0)
+ return ret;
+
+ status = MT6323_RG_ISINK_CK_PDN(led->id);
+ ret = regmap_update_bits(regmap, MT6323_TOP_CKPDN2,
+ MT6323_RG_ISINK_CK_PDN_MASK(led->id),
+ ~status);
+ if (ret < 0)
+ return ret;
+
+ usleep_range(100, 300);
+
+ ret = regmap_update_bits(regmap, MT6323_ISINK_EN_CTRL,
+ MT6323_ISINK_CH_EN_MASK(led->id),
+ MT6323_ISINK_CH_EN(led->id));
+ if (ret < 0)
+ return ret;
+
+ ret = regmap_update_bits(regmap, MT6323_ISINK_CON2(led->id),
+ MT6323_ISINK_CH_STEP_MASK,
+ MT6323_ISINK_CH_STEP(1));
+ if (ret < 0)
+ return ret;
+
+ ret = regmap_update_bits(regmap, MT6323_ISINK_CON0(led->id),
+ MT6323_ISINK_DIM_DUTY_MASK,
+ MT6323_ISINK_DIM_DUTY(31));
+ if (ret < 0)
+ return ret;
+
+ ret = regmap_update_bits(regmap, MT6323_ISINK_CON1(led->id),
+ MT6323_ISINK_DIM_FSEL_MASK,
+ MT6323_ISINK_DIM_FSEL(1000));
+ if (ret < 0)
+ return ret;
+
+ led->current_brightness = 1;
+
+ return 0;
+}
+
+static int mt6323_led_set_blink(struct led_classdev *cdev,
+ unsigned long *delay_on,
+ unsigned long *delay_off)
+{
+ struct mt6323_led *led = container_of(cdev, struct mt6323_led, cdev);
+ struct mt6323_leds *leds = led->parent;
+ struct regmap *regmap = leds->hw->regmap;
+ u16 period;
+ u8 duty_cycle, duty_hw;
+ int ret;
+
+ /*
+ * Units are in ms, if over the hardware able
+ * to support, fallback into software blink.
+ */
+ if (*delay_on + *delay_off > MT6323_MAX_PERIOD)
+ return -EINVAL;
+
+ /*
+ * LED subsystem requires a default user
+ * friendly blink pattern for the LED so using
+ * 1Hz duty cycle 50% here if without specific
+ * value delay_on and delay off being assigned.
+ */
+ if (*delay_on == 0 && *delay_off == 0) {
+ *delay_on = 500;
+ *delay_off = 500;
+ }
+
+ period = *delay_on + *delay_off;
+
+ /*
+ * duty_cycle is the percentage of period during
+ * which the led is ON.
+ */
+ duty_cycle = 100 * (*delay_on) / period;
+
+ mutex_lock(&leds->lock);
+
+ if (!led->current_brightness) {
+ ret = mt6323_led_hw_on(cdev);
+ if (ret < 0)
+ goto out;
+ }
+
+ duty_hw = DIV_ROUND_CLOSEST(duty_cycle * 1000, MT6323_UNIT_DUTY);
+ ret = regmap_update_bits(regmap, MT6323_ISINK_CON0(led->id),
+ MT6323_ISINK_DIM_DUTY_MASK,
+ MT6323_ISINK_DIM_DUTY(duty_hw));
+ if (ret < 0)
+ goto out;
+
+ ret = regmap_update_bits(regmap, MT6323_ISINK_CON1(led->id),
+ MT6323_ISINK_DIM_FSEL_MASK,
+ MT6323_ISINK_DIM_FSEL(period - 1));
+out:
+ mutex_unlock(&leds->lock);
+
+ return ret;
+}
+
+static int mt6323_led_set_brightness(struct led_classdev *cdev,
+ enum led_brightness brightness)
+{
+ struct mt6323_led *led = container_of(cdev, struct mt6323_led, cdev);
+ struct mt6323_leds *leds = led->parent;
+ struct regmap *regmap = leds->hw->regmap;
+ int ret;
+
+ mutex_lock(&leds->lock);
+
+ if (!led->current_brightness && brightness) {
+ ret = mt6323_led_hw_on(cdev);
+ if (ret < 0)
+ goto out;
+ }
+
+ if (brightness) {
+ /*
+ * Setup current output for the corresponding
+ * brightness level.
+ */
+ ret = regmap_update_bits(regmap, MT6323_ISINK_CON2(led->id),
+ MT6323_ISINK_CH_STEP_MASK,
+ MT6323_ISINK_CH_STEP(brightness - 1));
+ if (ret < 0)
+ goto out;
+
+ ret = regmap_update_bits(regmap, MT6323_ISINK_CON2(led->id),
+ MT6323_ISINK_SFSTR0_TC_MASK |
+ MT6323_ISINK_SFSTR0_EN_MASK,
+ MT6323_ISINK_SFSTR0_TC(2) |
+ MT6323_ISINK_SFSTR0_EN);
+ if (ret < 0)
+ goto out;
+ } else {
+ ret = mt6323_led_hw_off(cdev);
+ if (ret < 0)
+ goto out;
+ }
+
+ led->current_brightness = brightness;
+out:
+ mutex_unlock(&leds->lock);
+
+ return ret;
+}
+
+static int mt6323_led_set_dt_default(struct led_classdev *cdev,
+ struct device_node *np)
+{
+ struct mt6323_led *led = container_of(cdev, struct mt6323_led, cdev);
+ const char *state;
+ int ret;
+
+ led->cdev.name = of_get_property(np, "label", NULL) ? : np->name;
+ led->cdev.default_trigger = of_get_property(np,
+ "linux,default-trigger",
+ NULL);
+
+ state = of_get_property(np, "default-state", NULL);
+ if (state) {
+ if (!strcmp(state, "keep")) {
+ ret = mt6323_get_led_hw_brightness(cdev);
+ if (ret < 0)
+ return ret;
+ led->current_brightness = ret;
+ } else if (!strcmp(state, "on")) {
+ mt6323_led_set_brightness(cdev, 1);
+ } else {
+ mt6323_led_set_brightness(cdev, 0);
+ }
+ }
+
+ return 0;
+}
+
+static int mt6323_led_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct device_node *np = pdev->dev.of_node;
+ struct device_node *child;
+ struct mt6397_chip *hw = dev_get_drvdata(pdev->dev.parent);
+ struct mt6323_leds *leds;
+ int ret, i = 0, count;
+ unsigned int status;
+
+ count = of_get_child_count(np);
+ if (!count)
+ return -ENODEV;
+
+ count = (count <= MT6323_MAX_LEDS) ? count : MT6323_MAX_LEDS;
+
+ leds = devm_kzalloc(dev, sizeof(struct mt6323_leds) +
+ sizeof(struct mt6323_led) * count,
+ GFP_KERNEL);
+ if (!leds)
+ return -ENOMEM;
+
+ platform_set_drvdata(pdev, leds);
+ leds->dev = dev;
+
+ /*
+ * leds->hw points to the underlying bus for the register
+ * controlled.
+ */
+ leds->hw = hw;
+ mutex_init(&leds->lock);
+ leds->led_num = count;
+
+ status = MT6323_RG_DRV_32K_CK_PDN;
+ ret = regmap_update_bits(leds->hw->regmap, MT6323_TOP_CKPDN0,
+ MT6323_RG_DRV_32K_CK_PDN_MASK, ~status);
+ if (ret < 0) {
+ dev_err(leds->dev,
+ "Failed to update MT6323_TOP_CKPDN0 Register\n");
+ return ret;
+ }
+
+ for_each_available_child_of_node(np, child) {
+ leds->led[i].cdev.max_brightness = MT6323_MAX_BRIGHTNESS;
+ leds->led[i].cdev.brightness_set_blocking =
+ mt6323_led_set_brightness;
+ leds->led[i].cdev.blink_set = mt6323_led_set_blink;
+ leds->led[i].id = i;
+ leds->led[i].parent = leds;
+
+ ret = mt6323_led_set_dt_default(&leds->led[i].cdev, child);
+ if (ret < 0) {
+ dev_err(leds->dev,
+ "Failed to LED set default from devicetree\n");
+ return ret;
+ }
+
+ ret = devm_led_classdev_register(dev, &leds->led[i].cdev);
+ if (ret) {
+ dev_err(&pdev->dev, "Failed to register LED: %d\n",
+ ret);
+ return ret;
+ }
+ leds->led[i].cdev.dev->of_node = child;
+ i++;
+ }
+
+ return 0;
+}
+
+static int mt6323_led_remove(struct platform_device *pdev)
+{
+ struct mt6323_leds *leds = platform_get_drvdata(pdev);
+ int i;
+
+ /* Turn the LEDs off on driver removal. */
+ for (i = 0 ; i < leds->led_num ; i++)
+ mt6323_led_hw_off(&leds->led[i].cdev);
+
+ regmap_update_bits(leds->hw->regmap, MT6323_TOP_CKPDN0,
+ MT6323_RG_DRV_32K_CK_PDN_MASK,
+ MT6323_RG_DRV_32K_CK_PDN);
+
+ mutex_destroy(&leds->lock);
+
+ return 0;
+}
+
+static const struct of_device_id mt6323_led_dt_match[] = {
+ { .compatible = "mediatek,mt6323-led" },
+ {},
+};
+MODULE_DEVICE_TABLE(of, mt6323_led_dt_match);
+
+static struct platform_driver mt6323_led_driver = {
+ .probe = mt6323_led_probe,
+ .remove = mt6323_led_remove,
+ .driver = {
+ .name = "mt6323-led",
+ .of_match_table = mt6323_led_dt_match,
+ },
+};
+
+module_platform_driver(mt6323_led_driver);
+
+MODULE_DESCRIPTION("LED driver for Mediatek MT6323 PMIC");
+MODULE_AUTHOR("Sean Wang <sean.wang@mediatek.com>");
+MODULE_LICENSE("GPL");
--
1.9.1
WARNING: multiple messages have this Message-ID (diff)
From: sean.wang@mediatek.com (sean.wang at mediatek.com)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v3 3/4] leds: Add LED support for MT6323 PMIC
Date: Fri, 17 Feb 2017 14:05:59 +0800 [thread overview]
Message-ID: <1487311560-26684-4-git-send-email-sean.wang@mediatek.com> (raw)
In-Reply-To: <1487311560-26684-1-git-send-email-sean.wang@mediatek.com>
From: Sean Wang <sean.wang@mediatek.com>
MT6323 PMIC is a multi-function device that includes
LED function. It allows attaching up to 4 LEDs which
can either be on, off or dimmed and/or blinked with
the controller.
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
---
drivers/leds/Kconfig | 8 +
drivers/leds/Makefile | 1 +
drivers/leds/leds-mt6323.c | 470 +++++++++++++++++++++++++++++++++++++++++++++
3 files changed, 479 insertions(+)
create mode 100644 drivers/leds/leds-mt6323.c
diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig
index c621cbb..30095fc 100644
--- a/drivers/leds/Kconfig
+++ b/drivers/leds/Kconfig
@@ -117,6 +117,14 @@ config LEDS_MIKROTIK_RB532
This option enables support for the so called "User LED" of
Mikrotik's Routerboard 532.
+config LEDS_MT6323
+ tristate "LED Support for Mediatek MT6323 PMIC"
+ depends on LEDS_CLASS
+ depends on MFD_MT6397
+ help
+ This option enables support for on-chip LED drivers found on
+ Mediatek MT6323 PMIC.
+
config LEDS_S3C24XX
tristate "LED Support for Samsung S3C24XX GPIO LEDs"
depends on LEDS_CLASS
diff --git a/drivers/leds/Makefile b/drivers/leds/Makefile
index 6b82737..4feb332 100644
--- a/drivers/leds/Makefile
+++ b/drivers/leds/Makefile
@@ -72,6 +72,7 @@ obj-$(CONFIG_LEDS_IS31FL32XX) += leds-is31fl32xx.o
obj-$(CONFIG_LEDS_PM8058) += leds-pm8058.o
obj-$(CONFIG_LEDS_MLXCPLD) += leds-mlxcpld.o
obj-$(CONFIG_LEDS_NIC78BX) += leds-nic78bx.o
+obj-$(CONFIG_LEDS_MT6323) += leds-mt6323.o
# LED SPI Drivers
obj-$(CONFIG_LEDS_DAC124S085) += leds-dac124s085.o
diff --git a/drivers/leds/leds-mt6323.c b/drivers/leds/leds-mt6323.c
new file mode 100644
index 0000000..f431b1d
--- /dev/null
+++ b/drivers/leds/leds-mt6323.c
@@ -0,0 +1,470 @@
+/*
+ * LED driver for Mediatek MT6323 PMIC
+ *
+ * Copyright (C) 2017 Sean Wang <sean.wang@mediatek.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+#include <linux/kernel.h>
+#include <linux/leds.h>
+#include <linux/mfd/mt6323/registers.h>
+#include <linux/mfd/mt6397/core.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+
+/*
+ * Register field for MT6323_TOP_CKPDN0 to enable
+ * 32K clock common for LED device.
+ */
+#define MT6323_RG_DRV_32K_CK_PDN BIT(11)
+#define MT6323_RG_DRV_32K_CK_PDN_MASK BIT(11)
+
+/*
+ * Register field for MT6323_TOP_CKPDN2 to enable
+ * individual clock for LED device.
+ */
+#define MT6323_RG_ISINK_CK_PDN(i) BIT(i)
+#define MT6323_RG_ISINK_CK_PDN_MASK(i) BIT(i)
+
+/*
+ * Register field for MT6323_TOP_CKCON1 to select
+ * clock source.
+ */
+#define MT6323_RG_ISINK_CK_SEL_MASK(i) (BIT(10) << (i))
+
+/*
+ * Register for MT6323_ISINK_CON0 to setup the
+ * duty cycle of the blink.
+ */
+#define MT6323_ISINK_CON0(i) (MT6323_ISINK0_CON0 + 0x8 * (i))
+#define MT6323_ISINK_DIM_DUTY_MASK (0x1f << 8)
+#define MT6323_ISINK_DIM_DUTY(i) (((i) << 8) & \
+ MT6323_ISINK_DIM_DUTY_MASK)
+
+/* Register to setup the period of the blink. */
+#define MT6323_ISINK_CON1(i) (MT6323_ISINK0_CON1 + 0x8 * (i))
+#define MT6323_ISINK_DIM_FSEL_MASK (0xffff)
+#define MT6323_ISINK_DIM_FSEL(i) ((i) & MT6323_ISINK_DIM_FSEL_MASK)
+
+/* Register to control the brightness. */
+#define MT6323_ISINK_CON2(i) (MT6323_ISINK0_CON2 + 0x8 * (i))
+#define MT6323_ISINK_CH_STEP_SHIFT 12
+#define MT6323_ISINK_CH_STEP_MASK (0x7 << 12)
+#define MT6323_ISINK_CH_STEP(i) (((i) << 12) & \
+ MT6323_ISINK_CH_STEP_MASK)
+#define MT6323_ISINK_SFSTR0_TC_MASK (0x3 << 1)
+#define MT6323_ISINK_SFSTR0_TC(i) (((i) << 1) & \
+ MT6323_ISINK_SFSTR0_TC_MASK)
+#define MT6323_ISINK_SFSTR0_EN_MASK BIT(0)
+#define MT6323_ISINK_SFSTR0_EN BIT(0)
+
+/* Register to LED channel enablement. */
+#define MT6323_ISINK_CH_EN_MASK(i) BIT(i)
+#define MT6323_ISINK_CH_EN(i) BIT(i)
+
+#define MT6323_MAX_PERIOD 10000
+#define MT6323_MAX_LEDS 4
+#define MT6323_MAX_BRIGHTNESS 6
+#define MT6323_UNIT_DUTY 3125
+
+struct mt6323_leds;
+
+/**
+ * struct mt6323_led - state container for the LED device
+ * @id: the identifier in MT6323 LED device
+ * @parent: the pointer to MT6323 LED controller
+ * @cdev: LED class device for this LED device
+ * @current_brightness: current state of the LED device
+ */
+struct mt6323_led {
+ int id;
+ struct mt6323_leds *parent;
+ struct led_classdev cdev;
+ u8 current_brightness;
+};
+
+/**
+ * struct mt6323_leds - state container for holding LED controller
+ * of the driver
+ * @dev: the device pointer
+ * @hw: the underlying hardware providing shared
+ * bus for the register operations
+ * @led_num: how much the LED device the controller could control
+ * @lock: the lock among process context
+ * @led: the array that contains the state of individual
+ * LED device
+ */
+struct mt6323_leds {
+ struct device *dev;
+ struct mt6397_chip *hw;
+ u8 led_num;
+ /* protect among process context */
+ struct mutex lock;
+ struct mt6323_led led[MT6323_MAX_LEDS];
+};
+
+static int mt6323_led_hw_off(struct led_classdev *cdev)
+{
+ struct mt6323_led *led = container_of(cdev, struct mt6323_led, cdev);
+ struct mt6323_leds *leds = led->parent;
+ struct regmap *regmap = leds->hw->regmap;
+ unsigned int status;
+ int ret;
+
+ status = MT6323_ISINK_CH_EN(led->id);
+ ret = regmap_update_bits(regmap, MT6323_ISINK_EN_CTRL,
+ MT6323_ISINK_CH_EN_MASK(led->id), ~status);
+ if (ret < 0)
+ return ret;
+
+ usleep_range(100, 300);
+ ret = regmap_update_bits(regmap, MT6323_TOP_CKPDN2,
+ MT6323_RG_ISINK_CK_PDN_MASK(led->id),
+ MT6323_RG_ISINK_CK_PDN(led->id));
+ if (ret < 0)
+ return ret;
+
+ return 0;
+}
+
+static int mt6323_get_led_hw_brightness(struct led_classdev *cdev)
+{
+ struct mt6323_led *led = container_of(cdev, struct mt6323_led, cdev);
+ struct mt6323_leds *leds = led->parent;
+ struct regmap *regmap = leds->hw->regmap;
+ unsigned int status;
+ int ret;
+
+ ret = regmap_read(regmap, MT6323_TOP_CKPDN2, &status);
+ if (ret < 0)
+ return ret;
+
+ if (status & MT6323_RG_ISINK_CK_PDN_MASK(led->id))
+ return 0;
+
+ ret = regmap_read(regmap, MT6323_ISINK_EN_CTRL, &status);
+ if (ret < 0)
+ return ret;
+
+ if (!(status & MT6323_ISINK_CH_EN(led->id)))
+ return 0;
+
+ ret = regmap_read(regmap, MT6323_ISINK_CON2(led->id), &status);
+ if (ret < 0)
+ return ret;
+
+ return ((status & MT6323_ISINK_CH_STEP_MASK)
+ >> MT6323_ISINK_CH_STEP_SHIFT) + 1;
+}
+
+static int mt6323_led_hw_on(struct led_classdev *cdev)
+{
+ struct mt6323_led *led = container_of(cdev, struct mt6323_led, cdev);
+ struct mt6323_leds *leds = led->parent;
+ struct regmap *regmap = leds->hw->regmap;
+ unsigned int status;
+ int ret;
+
+ /*
+ * Setup required clock source, enable the corresponding
+ * clock and channel and let work with continuous blink as
+ * the default.
+ */
+ ret = regmap_update_bits(regmap, MT6323_TOP_CKCON1,
+ MT6323_RG_ISINK_CK_SEL_MASK(led->id), 0);
+ if (ret < 0)
+ return ret;
+
+ status = MT6323_RG_ISINK_CK_PDN(led->id);
+ ret = regmap_update_bits(regmap, MT6323_TOP_CKPDN2,
+ MT6323_RG_ISINK_CK_PDN_MASK(led->id),
+ ~status);
+ if (ret < 0)
+ return ret;
+
+ usleep_range(100, 300);
+
+ ret = regmap_update_bits(regmap, MT6323_ISINK_EN_CTRL,
+ MT6323_ISINK_CH_EN_MASK(led->id),
+ MT6323_ISINK_CH_EN(led->id));
+ if (ret < 0)
+ return ret;
+
+ ret = regmap_update_bits(regmap, MT6323_ISINK_CON2(led->id),
+ MT6323_ISINK_CH_STEP_MASK,
+ MT6323_ISINK_CH_STEP(1));
+ if (ret < 0)
+ return ret;
+
+ ret = regmap_update_bits(regmap, MT6323_ISINK_CON0(led->id),
+ MT6323_ISINK_DIM_DUTY_MASK,
+ MT6323_ISINK_DIM_DUTY(31));
+ if (ret < 0)
+ return ret;
+
+ ret = regmap_update_bits(regmap, MT6323_ISINK_CON1(led->id),
+ MT6323_ISINK_DIM_FSEL_MASK,
+ MT6323_ISINK_DIM_FSEL(1000));
+ if (ret < 0)
+ return ret;
+
+ led->current_brightness = 1;
+
+ return 0;
+}
+
+static int mt6323_led_set_blink(struct led_classdev *cdev,
+ unsigned long *delay_on,
+ unsigned long *delay_off)
+{
+ struct mt6323_led *led = container_of(cdev, struct mt6323_led, cdev);
+ struct mt6323_leds *leds = led->parent;
+ struct regmap *regmap = leds->hw->regmap;
+ u16 period;
+ u8 duty_cycle, duty_hw;
+ int ret;
+
+ /*
+ * Units are in ms, if over the hardware able
+ * to support, fallback into software blink.
+ */
+ if (*delay_on + *delay_off > MT6323_MAX_PERIOD)
+ return -EINVAL;
+
+ /*
+ * LED subsystem requires a default user
+ * friendly blink pattern for the LED so using
+ * 1Hz duty cycle 50% here if without specific
+ * value delay_on and delay off being assigned.
+ */
+ if (*delay_on == 0 && *delay_off == 0) {
+ *delay_on = 500;
+ *delay_off = 500;
+ }
+
+ period = *delay_on + *delay_off;
+
+ /*
+ * duty_cycle is the percentage of period during
+ * which the led is ON.
+ */
+ duty_cycle = 100 * (*delay_on) / period;
+
+ mutex_lock(&leds->lock);
+
+ if (!led->current_brightness) {
+ ret = mt6323_led_hw_on(cdev);
+ if (ret < 0)
+ goto out;
+ }
+
+ duty_hw = DIV_ROUND_CLOSEST(duty_cycle * 1000, MT6323_UNIT_DUTY);
+ ret = regmap_update_bits(regmap, MT6323_ISINK_CON0(led->id),
+ MT6323_ISINK_DIM_DUTY_MASK,
+ MT6323_ISINK_DIM_DUTY(duty_hw));
+ if (ret < 0)
+ goto out;
+
+ ret = regmap_update_bits(regmap, MT6323_ISINK_CON1(led->id),
+ MT6323_ISINK_DIM_FSEL_MASK,
+ MT6323_ISINK_DIM_FSEL(period - 1));
+out:
+ mutex_unlock(&leds->lock);
+
+ return ret;
+}
+
+static int mt6323_led_set_brightness(struct led_classdev *cdev,
+ enum led_brightness brightness)
+{
+ struct mt6323_led *led = container_of(cdev, struct mt6323_led, cdev);
+ struct mt6323_leds *leds = led->parent;
+ struct regmap *regmap = leds->hw->regmap;
+ int ret;
+
+ mutex_lock(&leds->lock);
+
+ if (!led->current_brightness && brightness) {
+ ret = mt6323_led_hw_on(cdev);
+ if (ret < 0)
+ goto out;
+ }
+
+ if (brightness) {
+ /*
+ * Setup current output for the corresponding
+ * brightness level.
+ */
+ ret = regmap_update_bits(regmap, MT6323_ISINK_CON2(led->id),
+ MT6323_ISINK_CH_STEP_MASK,
+ MT6323_ISINK_CH_STEP(brightness - 1));
+ if (ret < 0)
+ goto out;
+
+ ret = regmap_update_bits(regmap, MT6323_ISINK_CON2(led->id),
+ MT6323_ISINK_SFSTR0_TC_MASK |
+ MT6323_ISINK_SFSTR0_EN_MASK,
+ MT6323_ISINK_SFSTR0_TC(2) |
+ MT6323_ISINK_SFSTR0_EN);
+ if (ret < 0)
+ goto out;
+ } else {
+ ret = mt6323_led_hw_off(cdev);
+ if (ret < 0)
+ goto out;
+ }
+
+ led->current_brightness = brightness;
+out:
+ mutex_unlock(&leds->lock);
+
+ return ret;
+}
+
+static int mt6323_led_set_dt_default(struct led_classdev *cdev,
+ struct device_node *np)
+{
+ struct mt6323_led *led = container_of(cdev, struct mt6323_led, cdev);
+ const char *state;
+ int ret;
+
+ led->cdev.name = of_get_property(np, "label", NULL) ? : np->name;
+ led->cdev.default_trigger = of_get_property(np,
+ "linux,default-trigger",
+ NULL);
+
+ state = of_get_property(np, "default-state", NULL);
+ if (state) {
+ if (!strcmp(state, "keep")) {
+ ret = mt6323_get_led_hw_brightness(cdev);
+ if (ret < 0)
+ return ret;
+ led->current_brightness = ret;
+ } else if (!strcmp(state, "on")) {
+ mt6323_led_set_brightness(cdev, 1);
+ } else {
+ mt6323_led_set_brightness(cdev, 0);
+ }
+ }
+
+ return 0;
+}
+
+static int mt6323_led_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct device_node *np = pdev->dev.of_node;
+ struct device_node *child;
+ struct mt6397_chip *hw = dev_get_drvdata(pdev->dev.parent);
+ struct mt6323_leds *leds;
+ int ret, i = 0, count;
+ unsigned int status;
+
+ count = of_get_child_count(np);
+ if (!count)
+ return -ENODEV;
+
+ count = (count <= MT6323_MAX_LEDS) ? count : MT6323_MAX_LEDS;
+
+ leds = devm_kzalloc(dev, sizeof(struct mt6323_leds) +
+ sizeof(struct mt6323_led) * count,
+ GFP_KERNEL);
+ if (!leds)
+ return -ENOMEM;
+
+ platform_set_drvdata(pdev, leds);
+ leds->dev = dev;
+
+ /*
+ * leds->hw points to the underlying bus for the register
+ * controlled.
+ */
+ leds->hw = hw;
+ mutex_init(&leds->lock);
+ leds->led_num = count;
+
+ status = MT6323_RG_DRV_32K_CK_PDN;
+ ret = regmap_update_bits(leds->hw->regmap, MT6323_TOP_CKPDN0,
+ MT6323_RG_DRV_32K_CK_PDN_MASK, ~status);
+ if (ret < 0) {
+ dev_err(leds->dev,
+ "Failed to update MT6323_TOP_CKPDN0 Register\n");
+ return ret;
+ }
+
+ for_each_available_child_of_node(np, child) {
+ leds->led[i].cdev.max_brightness = MT6323_MAX_BRIGHTNESS;
+ leds->led[i].cdev.brightness_set_blocking =
+ mt6323_led_set_brightness;
+ leds->led[i].cdev.blink_set = mt6323_led_set_blink;
+ leds->led[i].id = i;
+ leds->led[i].parent = leds;
+
+ ret = mt6323_led_set_dt_default(&leds->led[i].cdev, child);
+ if (ret < 0) {
+ dev_err(leds->dev,
+ "Failed to LED set default from devicetree\n");
+ return ret;
+ }
+
+ ret = devm_led_classdev_register(dev, &leds->led[i].cdev);
+ if (ret) {
+ dev_err(&pdev->dev, "Failed to register LED: %d\n",
+ ret);
+ return ret;
+ }
+ leds->led[i].cdev.dev->of_node = child;
+ i++;
+ }
+
+ return 0;
+}
+
+static int mt6323_led_remove(struct platform_device *pdev)
+{
+ struct mt6323_leds *leds = platform_get_drvdata(pdev);
+ int i;
+
+ /* Turn the LEDs off on driver removal. */
+ for (i = 0 ; i < leds->led_num ; i++)
+ mt6323_led_hw_off(&leds->led[i].cdev);
+
+ regmap_update_bits(leds->hw->regmap, MT6323_TOP_CKPDN0,
+ MT6323_RG_DRV_32K_CK_PDN_MASK,
+ MT6323_RG_DRV_32K_CK_PDN);
+
+ mutex_destroy(&leds->lock);
+
+ return 0;
+}
+
+static const struct of_device_id mt6323_led_dt_match[] = {
+ { .compatible = "mediatek,mt6323-led" },
+ {},
+};
+MODULE_DEVICE_TABLE(of, mt6323_led_dt_match);
+
+static struct platform_driver mt6323_led_driver = {
+ .probe = mt6323_led_probe,
+ .remove = mt6323_led_remove,
+ .driver = {
+ .name = "mt6323-led",
+ .of_match_table = mt6323_led_dt_match,
+ },
+};
+
+module_platform_driver(mt6323_led_driver);
+
+MODULE_DESCRIPTION("LED driver for Mediatek MT6323 PMIC");
+MODULE_AUTHOR("Sean Wang <sean.wang@mediatek.com>");
+MODULE_LICENSE("GPL");
--
1.9.1
next prev parent reply other threads:[~2017-02-17 6:06 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-02-17 6:05 [PATCH v3 0/4] leds: add leds-mt6323 support on MT7623 SoC sean.wang
2017-02-17 6:05 ` sean.wang at mediatek.com
2017-02-17 6:05 ` sean.wang
2017-02-17 6:05 ` [PATCH v3 2/4] Documentation: devicetree: Add LED subnode binding for MT6323 PMIC sean.wang
2017-02-17 6:05 ` sean.wang at mediatek.com
2017-02-17 6:05 ` sean.wang
2017-02-17 6:05 ` sean.wang [this message]
2017-02-17 6:05 ` [PATCH v3 3/4] leds: Add LED support " sean.wang at mediatek.com
2017-02-17 6:05 ` sean.wang
2017-02-17 21:54 ` Jacek Anaszewski
2017-02-17 21:54 ` Jacek Anaszewski
2017-02-17 21:54 ` Jacek Anaszewski
[not found] ` <1487311560-26684-1-git-send-email-sean.wang-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
2017-02-17 6:05 ` [PATCH v3 1/4] Documentation: devicetree: Add document bindings for leds-mt6323 sean.wang-NuS5LvNUpcJWk0Htik3J/w
2017-02-17 6:05 ` sean.wang at mediatek.com
2017-02-17 6:05 ` sean.wang
2017-02-17 21:54 ` Jacek Anaszewski
2017-02-17 21:54 ` Jacek Anaszewski
2017-02-17 21:54 ` Jacek Anaszewski
2017-02-17 6:06 ` [PATCH v3 4/4] mfd: mt6397: Add MT6323 LED support into MT6397 driver sean.wang-NuS5LvNUpcJWk0Htik3J/w
2017-02-17 6:06 ` sean.wang at mediatek.com
2017-02-17 6:06 ` sean.wang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1487311560-26684-4-git-send-email-sean.wang@mediatek.com \
--to=sean.wang@mediatek.com \
--cc=devicetree@vger.kernel.org \
--cc=jacek.anaszewski@gmail.com \
--cc=keyhaede@gmail.com \
--cc=lee.jones@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-leds@vger.kernel.org \
--cc=linux-mediatek@lists.infradead.org \
--cc=mark.rutland@arm.com \
--cc=matthias.bgg@gmail.com \
--cc=pavel@ucw.cz \
--cc=robh+dt@kernel.org \
--cc=rpurdie@rpsys.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.