From: Phil Reid <preid-qgqNFa1JUf/o2iN0hyhwsIdd74u8MsAO@public.gmane.org>
To: jic23-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org,
knaack.h-Mmb7MZpHnFY@public.gmane.org,
lars-Qo5EllUWu/uELgA04lAiVw@public.gmane.org,
pmeerw-jW+XmwGofnusTnJN9+BGXg@public.gmane.org,
robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org,
mark.rutland-5wv7dgnIgG8@public.gmane.org,
Michael.Hennerich-OyLXuOCK7orQT0dZR+AlfA@public.gmane.org,
preid-qgqNFa1JUf/o2iN0hyhwsIdd74u8MsAO@public.gmane.org,
linux-iio-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
alexandru.ardelean-OyLXuOCK7orQT0dZR+AlfA@public.gmane.org
Subject: [PATCH v3 0/2] iio: ad5272: Add support for Analog Devices digital potentiometers
Date: Wed, 17 Jan 2018 11:38:26 +0800 [thread overview]
Message-ID: <1516160308-16937-1-git-send-email-preid@electromag.com.au> (raw)
Add documentation and driver for the Analog Devices 5272.
Driver currently doesn't support programing the RDAC position to
non-volatile memory.
Changes from v2:
- docs: Fix polarity of reset-gpio example to match driver
- Use a cached aligned buffer for i2c
- remove old invalid comment from c&p
Changes from v1:
- Use spdx license id
- Use sizeof for i2c buffer lens
- Condense code a little when setting up i2c buf
- check val2 in raw write
- Add reset function. Perform a software reset if
gpio reset pin is not defined
- remove THIS_MODULE assignment
- change of data to use index as per i2c device table
Phil Reid (2):
dt-bindings: ad5272: Add bindings for Analog Devices digital
potentiometers
iio: ad5272: Add support for Analog Devices digital potentiometers
.../bindings/iio/potentiometer/ad5272.txt | 27 +++
drivers/iio/potentiometer/Kconfig | 10 +
drivers/iio/potentiometer/Makefile | 1 +
drivers/iio/potentiometer/ad5272.c | 227 +++++++++++++++++++++
4 files changed, 265 insertions(+)
create mode 100644 Documentation/devicetree/bindings/iio/potentiometer/ad5272.txt
create mode 100644 drivers/iio/potentiometer/ad5272.c
--
1.8.3.1
WARNING: multiple messages have this Message-ID (diff)
From: Phil Reid <preid@electromag.com.au>
To: jic23@kernel.org, knaack.h@gmx.de, lars@metafoo.de,
pmeerw@pmeerw.net, robh+dt@kernel.org, mark.rutland@arm.com,
Michael.Hennerich@analog.com, preid@electromag.com.au,
linux-iio@vger.kernel.org, devicetree@vger.kernel.org,
alexandru.ardelean@analog.com
Subject: [PATCH v3 0/2] iio: ad5272: Add support for Analog Devices digital potentiometers
Date: Wed, 17 Jan 2018 11:38:26 +0800 [thread overview]
Message-ID: <1516160308-16937-1-git-send-email-preid@electromag.com.au> (raw)
Add documentation and driver for the Analog Devices 5272.
Driver currently doesn't support programing the RDAC position to
non-volatile memory.
Changes from v2:
- docs: Fix polarity of reset-gpio example to match driver
- Use a cached aligned buffer for i2c
- remove old invalid comment from c&p
Changes from v1:
- Use spdx license id
- Use sizeof for i2c buffer lens
- Condense code a little when setting up i2c buf
- check val2 in raw write
- Add reset function. Perform a software reset if
gpio reset pin is not defined
- remove THIS_MODULE assignment
- change of data to use index as per i2c device table
Phil Reid (2):
dt-bindings: ad5272: Add bindings for Analog Devices digital
potentiometers
iio: ad5272: Add support for Analog Devices digital potentiometers
.../bindings/iio/potentiometer/ad5272.txt | 27 +++
drivers/iio/potentiometer/Kconfig | 10 +
drivers/iio/potentiometer/Makefile | 1 +
drivers/iio/potentiometer/ad5272.c | 227 +++++++++++++++++++++
4 files changed, 265 insertions(+)
create mode 100644 Documentation/devicetree/bindings/iio/potentiometer/ad5272.txt
create mode 100644 drivers/iio/potentiometer/ad5272.c
--
1.8.3.1
next reply other threads:[~2018-01-17 3:38 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-01-17 3:38 Phil Reid [this message]
2018-01-17 3:38 ` [PATCH v3 0/2] iio: ad5272: Add support for Analog Devices digital potentiometers Phil Reid
[not found] ` <1516160308-16937-1-git-send-email-preid-qgqNFa1JUf/o2iN0hyhwsIdd74u8MsAO@public.gmane.org>
2018-01-17 3:38 ` [PATCH v3 1/2] dt-bindings: ad5272: Add bindings " Phil Reid
2018-01-17 3:38 ` Phil Reid
2018-01-17 3:38 ` [PATCH v3 2/2] iio: ad5272: Add support " Phil Reid
2018-01-17 3:38 ` Phil Reid
[not found] ` <1516160308-16937-3-git-send-email-preid-qgqNFa1JUf/o2iN0hyhwsIdd74u8MsAO@public.gmane.org>
2018-01-20 17:12 ` Jonathan Cameron
2018-01-20 17:12 ` Jonathan Cameron
2018-01-29 2:08 ` Phil Reid
2018-01-29 2:08 ` Phil Reid
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1516160308-16937-1-git-send-email-preid@electromag.com.au \
--to=preid-qgqnfa1juf/o2in0hyhwsidd74u8msao@public.gmane.org \
--cc=Michael.Hennerich-OyLXuOCK7orQT0dZR+AlfA@public.gmane.org \
--cc=alexandru.ardelean-OyLXuOCK7orQT0dZR+AlfA@public.gmane.org \
--cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=jic23-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
--cc=knaack.h-Mmb7MZpHnFY@public.gmane.org \
--cc=lars-Qo5EllUWu/uELgA04lAiVw@public.gmane.org \
--cc=linux-iio-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=mark.rutland-5wv7dgnIgG8@public.gmane.org \
--cc=pmeerw-jW+XmwGofnusTnJN9+BGXg@public.gmane.org \
--cc=robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.