From: Manu Gautam <mgautam@codeaurora.org>
To: Kishon Vijay Abraham I <kishon@ti.com>
Cc: linux-arm-msm@vger.kernel.org,
Manu Gautam <mgautam@codeaurora.org>,
Rob Herring <robh+dt@kernel.org>,
Mark Rutland <mark.rutland@arm.com>,
Vivek Gautam <vivek.gautam@codeaurora.org>,
Varadarajan Narayanan <varada@codeaurora.org>,
"open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS"
<devicetree@vger.kernel.org>,
open list <linux-kernel@vger.kernel.org>
Subject: [PATCH 3/6] dt-bindings: phy-qcom-qmp: Update bindings for sdm845
Date: Fri, 16 Mar 2018 15:14:56 +0530 [thread overview]
Message-ID: <1521193500-4696-4-git-send-email-mgautam@codeaurora.org> (raw)
In-Reply-To: <1521193500-4696-1-git-send-email-mgautam@codeaurora.org>
Update compatible strings for USB3 PHYs on SDM845.
One is QMPv3 DisplayPort-USB combo PHY and other one
is USB UNI PHY which is single lane USB3 PHY without
DP capability.
Signed-off-by: Manu Gautam <mgautam@codeaurora.org>
---
Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt b/Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt
index dcf1b8f..cef8765 100644
--- a/Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt
+++ b/Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt
@@ -9,7 +9,9 @@ Required properties:
"qcom,ipq8074-qmp-pcie-phy" for PCIe phy on IPQ8074
"qcom,msm8996-qmp-pcie-phy" for 14nm PCIe phy on msm8996,
"qcom,msm8996-qmp-usb3-phy" for 14nm USB3 phy on msm8996,
- "qcom,qmp-v3-usb3-phy" for USB3 QMP V3 phy.
+ "qcom,qmp-v3-usb3-phy" for USB3 QMP V3 phy,
+ "qcom,sdm845-qmp-usb3-phy" for USB3 QMP V3 phy on sdm845,
+ "qcom,sdm845-qmp-usb3-uni-phy" for USB3 QMP V3 UNI phy on sdm845.
- reg: offset and length of register set for PHY's common serdes block.
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project
WARNING: multiple messages have this Message-ID (diff)
From: Manu Gautam <mgautam@codeaurora.org>
To: Kishon Vijay Abraham I <kishon@ti.com>
Cc: linux-arm-msm@vger.kernel.org,
Manu Gautam <mgautam@codeaurora.org>,
Rob Herring <robh+dt@kernel.org>,
Mark Rutland <mark.rutland@arm.com>,
Vivek Gautam <vivek.gautam@codeaurora.org>,
Varadarajan Narayanan <varada@codeaurora.org>,
devicetree@vger.kernel.org (open list:OPEN FIRMWARE AND
FLATTENED DEVICE TREE BINDINGS),
linux-kernel@vger.kernel.org (open list)
Subject: [PATCH 3/6] dt-bindings: phy-qcom-qmp: Update bindings for sdm845
Date: Fri, 16 Mar 2018 15:14:56 +0530 [thread overview]
Message-ID: <1521193500-4696-4-git-send-email-mgautam@codeaurora.org> (raw)
In-Reply-To: <1521193500-4696-1-git-send-email-mgautam@codeaurora.org>
Update compatible strings for USB3 PHYs on SDM845.
One is QMPv3 DisplayPort-USB combo PHY and other one
is USB UNI PHY which is single lane USB3 PHY without
DP capability.
Signed-off-by: Manu Gautam <mgautam@codeaurora.org>
---
Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt b/Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt
index dcf1b8f..cef8765 100644
--- a/Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt
+++ b/Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt
@@ -9,7 +9,9 @@ Required properties:
"qcom,ipq8074-qmp-pcie-phy" for PCIe phy on IPQ8074
"qcom,msm8996-qmp-pcie-phy" for 14nm PCIe phy on msm8996,
"qcom,msm8996-qmp-usb3-phy" for 14nm USB3 phy on msm8996,
- "qcom,qmp-v3-usb3-phy" for USB3 QMP V3 phy.
+ "qcom,qmp-v3-usb3-phy" for USB3 QMP V3 phy,
+ "qcom,sdm845-qmp-usb3-phy" for USB3 QMP V3 phy on sdm845,
+ "qcom,sdm845-qmp-usb3-uni-phy" for USB3 QMP V3 UNI phy on sdm845.
- reg: offset and length of register set for PHY's common serdes block.
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project
next prev parent reply other threads:[~2018-03-16 9:44 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <1521193500-4696-1-git-send-email-mgautam@codeaurora.org>
2018-03-16 9:44 ` [PATCH 1/6] phy: qcom-qmp: Enable pipe_clk before checking USB3 PHY_STATUS Manu Gautam
2018-03-16 9:44 ` Manu Gautam
2018-03-16 9:44 ` [PATCH 2/6] phy: qcom-qusb2: Fix crash if nvmem cell not specified Manu Gautam
2018-03-16 9:44 ` Manu Gautam
2018-03-20 10:12 ` Vivek Gautam
2018-03-16 9:44 ` Manu Gautam [this message]
2018-03-16 9:44 ` [PATCH 3/6] dt-bindings: phy-qcom-qmp: Update bindings for sdm845 Manu Gautam
2018-03-18 12:52 ` Rob Herring
2018-03-16 9:44 ` [PATCH 4/6] phy: qcom-qmp: Add QMP V3 USB3 UNI PHY support " Manu Gautam
2018-03-16 9:44 ` Manu Gautam
2018-03-19 17:51 ` Evan Green
2018-03-20 6:59 ` Manu Gautam
2018-03-20 16:36 ` Evan Green
2018-03-16 9:44 ` [PATCH 5/6] dt-bindings: phy-qcom-usb2: Update bindings " Manu Gautam
2018-03-16 9:44 ` Manu Gautam
2018-03-18 12:52 ` Rob Herring
2018-03-19 4:41 ` Manu Gautam
2018-03-20 10:23 ` Vivek Gautam
2018-03-20 10:42 ` Manu Gautam
2018-03-16 9:44 ` [PATCH 6/6] phy: qcom-qusb2: Add QUSB2 PHYs support " Manu Gautam
2018-03-16 9:44 ` Manu Gautam
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1521193500-4696-4-git-send-email-mgautam@codeaurora.org \
--to=mgautam@codeaurora.org \
--cc=devicetree@vger.kernel.org \
--cc=kishon@ti.com \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=robh+dt@kernel.org \
--cc=varada@codeaurora.org \
--cc=vivek.gautam@codeaurora.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.