[PATCH 6/7] arm64: dts: renesas: eagle: Add LVDS decoder

From: Jacopo Mondi <jacopo+renesas@jmondi.org>
To: horms@verge.net.au, magnus.damm@gmail.com, geert@linux-m68k.org,
	laurent.pinchart@ideasonboard.com, niklas.soderlund@ragnatech.se,
	sergei.shtylyov@cogentembedded.com
Cc: Jacopo Mondi <jacopo+renesas@jmondi.org>,
	dri-devel@lists.freedesktop.org,
	linux-renesas-soc@vger.kernel.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org
Subject: [PATCH 6/7] arm64: dts: renesas: eagle: Add LVDS decoder
Date: Fri,  6 Apr 2018 15:08:11 +0200	[thread overview]
Message-ID: <1523020092-25540-7-git-send-email-jacopo+renesas@jmondi.org> (raw)
In-Reply-To: <1523020092-25540-1-git-send-email-jacopo+renesas@jmondi.org>

The R-Car V3M Eagle board includes a transparent THC63LVD1024 LVDS
decoder, connected to the on-chip LVDS encoder output on one side
and to the not-yet-described HDMI encoder ADV7511W on the other one.

As the decoder does not need any configuration it has been so-far
omitted from DTS. Now that a driver is available, describe it in DT
as well.

Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
---
 arch/arm64/boot/dts/renesas/r8a77970-eagle.dts | 29 ++++++++++++++++++++++++++
 1 file changed, 29 insertions(+)

diff --git a/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts b/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts
index 144b847..9d0e65d 100644
--- a/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts
+++ b/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts
@@ -31,6 +31,23 @@
 		/* first 128MB is reserved for secure area. */
 		reg = <0x0 0x48000000 0x0 0x38000000>;
 	};
+
+	thc63lvd1024: lvds-decoder {
+		compatible = "thine,thc63lvd1024";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				thc63lvd1024_in: endpoint {
+					remote-endpoint = <&lvds0_out>;
+				};
+			};
+		};
+	};
 };
 
 &avb {
@@ -104,3 +121,15 @@
 	pinctrl-names = "default";
 	status = "okay";
 };
+
+&lvds0 {
+	status = "okay";
+
+	ports {
+		port@1 {
+			lvds0_out: endpoint {
+				remote-endpoint = <&thc63lvd1024_in>;
+			};
+		};
+	};
+};
-- 
2.7.4
