All of lore.kernel.org
 help / color / mirror / Atom feed
From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
To: Jacopo Mondi <jacopo+renesas@jmondi.org>
Cc: horms@verge.net.au, magnus.damm@gmail.com, geert@linux-m68k.org,
	niklas.soderlund@ragnatech.se,
	sergei.shtylyov@cogentembedded.com,
	dri-devel@lists.freedesktop.org,
	linux-renesas-soc@vger.kernel.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org,
	"Niklas Söderlund" <niklas.soderlund+renesas@ragnatech.se>
Subject: Re: [PATCH 7/7] arm64: dts: renesas: eagle: Add ADV7511W and HDMI output
Date: Fri, 06 Apr 2018 16:51:11 +0300	[thread overview]
Message-ID: <2235860.8H9ojNphtF@avalon> (raw)
In-Reply-To: <1523020092-25540-8-git-send-email-jacopo+renesas@jmondi.org>

Hi Jacopo,

Thank you for the patch.

On Friday, 6 April 2018 16:08:12 EEST Jacopo Mondi wrote:
> From: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
> 
> Enable HDMI output adding the HDMI connector and the ADV7511W, connected
> to THC63LVD1024 LVDS decoder output.
> 
> Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
> Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
> ---
>  arch/arm64/boot/dts/renesas/r8a77970-eagle.dts | 51 ++++++++++++++++++++++-
>  1 file changed, 50 insertions(+), 1 deletion(-)
> 
> diff --git a/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts
> b/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts index 9d0e65d..e9f7b83
> 100644
> --- a/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts
> +++ b/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts
> @@ -32,6 +32,17 @@
>  		reg = <0x0 0x48000000 0x0 0x38000000>;
>  	};
> 
> +	hdmi-out {
> +		compatible = "hdmi-connector";
> +		type = "a";
> +
> +		port {
> +			hdmi_con_out: endpoint {
> +				remote-endpoint = <&adv7511_out>;
> +			};
> +		};
> +	};
> +
>  	thc63lvd1024: lvds-decoder {
>  		compatible = "thine,thc63lvd1024";
> 
> @@ -41,11 +52,17 @@
> 
>  			port@0 {
>  				reg = <0>;
> -

This is unrelated, if you don't want a blank line here remove it from patch 
6/7 :-)

>  				thc63lvd1024_in: endpoint {
>  					remote-endpoint = <&lvds0_out>;
>  				};
>  			};
> +
> +			port@2 {
> +				reg = <2>;
> +				thc63lvd1024_out: endpoint {
> +					remote-endpoint = <&adv7511_in>;
> +				};
> +			};
>  		};
>  	};
>  };
> @@ -85,6 +102,38 @@
>  		gpio-controller;
>  		#gpio-cells = <2>;
>  	};
> +
> +	hdmi@39 {
> +		compatible = "adi,adv7511w";
> +		reg = <0x39>;
> +		interrupt-parent = <&gpio1>;
> +		interrupts = <20 IRQ_TYPE_LEVEL_LOW>;
> +
> +		adi,input-depth = <8>;
> +		adi,input-colorspace = "rgb";
> +		adi,input-clock = "1x";
> +		adi,input-style = <1>;
> +		adi,input-justification = "evenly";
> +
> +		ports {
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +
> +			port@0 {
> +				reg = <0>;
> +				adv7511_in: endpoint {
> +					remote-endpoint = <&thc63lvd1024_out>;
> +				};
> +			};
> +
> +			port@1 {
> +				reg = <1>;
> +				adv7511_out: endpoint {
> +					remote-endpoint = <&hdmi_con_out>;
> +				};
> +			};
> +		};
> +	};
>  };
> 
>  &pfc {

With patches 5/7, 6/7 and 7/7 merged together and the pinmux removed,

Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>

-- 
Regards,

Laurent Pinchart

WARNING: multiple messages have this Message-ID (diff)
From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
To: Jacopo Mondi <jacopo+renesas@jmondi.org>
Cc: devicetree@vger.kernel.org,
	"Niklas Söderlund" <niklas.soderlund+renesas@ragnatech.se>,
	sergei.shtylyov@cogentembedded.com, magnus.damm@gmail.com,
	linux-kernel@vger.kernel.org, dri-devel@lists.freedesktop.org,
	linux-renesas-soc@vger.kernel.org, horms@verge.net.au,
	geert@linux-m68k.org, niklas.soderlund@ragnatech.se
Subject: Re: [PATCH 7/7] arm64: dts: renesas: eagle: Add ADV7511W and HDMI output
Date: Fri, 06 Apr 2018 16:51:11 +0300	[thread overview]
Message-ID: <2235860.8H9ojNphtF@avalon> (raw)
In-Reply-To: <1523020092-25540-8-git-send-email-jacopo+renesas@jmondi.org>

Hi Jacopo,

Thank you for the patch.

On Friday, 6 April 2018 16:08:12 EEST Jacopo Mondi wrote:
> From: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
> 
> Enable HDMI output adding the HDMI connector and the ADV7511W, connected
> to THC63LVD1024 LVDS decoder output.
> 
> Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
> Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
> ---
>  arch/arm64/boot/dts/renesas/r8a77970-eagle.dts | 51 ++++++++++++++++++++++-
>  1 file changed, 50 insertions(+), 1 deletion(-)
> 
> diff --git a/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts
> b/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts index 9d0e65d..e9f7b83
> 100644
> --- a/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts
> +++ b/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts
> @@ -32,6 +32,17 @@
>  		reg = <0x0 0x48000000 0x0 0x38000000>;
>  	};
> 
> +	hdmi-out {
> +		compatible = "hdmi-connector";
> +		type = "a";
> +
> +		port {
> +			hdmi_con_out: endpoint {
> +				remote-endpoint = <&adv7511_out>;
> +			};
> +		};
> +	};
> +
>  	thc63lvd1024: lvds-decoder {
>  		compatible = "thine,thc63lvd1024";
> 
> @@ -41,11 +52,17 @@
> 
>  			port@0 {
>  				reg = <0>;
> -

This is unrelated, if you don't want a blank line here remove it from patch 
6/7 :-)

>  				thc63lvd1024_in: endpoint {
>  					remote-endpoint = <&lvds0_out>;
>  				};
>  			};
> +
> +			port@2 {
> +				reg = <2>;
> +				thc63lvd1024_out: endpoint {
> +					remote-endpoint = <&adv7511_in>;
> +				};
> +			};
>  		};
>  	};
>  };
> @@ -85,6 +102,38 @@
>  		gpio-controller;
>  		#gpio-cells = <2>;
>  	};
> +
> +	hdmi@39 {
> +		compatible = "adi,adv7511w";
> +		reg = <0x39>;
> +		interrupt-parent = <&gpio1>;
> +		interrupts = <20 IRQ_TYPE_LEVEL_LOW>;
> +
> +		adi,input-depth = <8>;
> +		adi,input-colorspace = "rgb";
> +		adi,input-clock = "1x";
> +		adi,input-style = <1>;
> +		adi,input-justification = "evenly";
> +
> +		ports {
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +
> +			port@0 {
> +				reg = <0>;
> +				adv7511_in: endpoint {
> +					remote-endpoint = <&thc63lvd1024_out>;
> +				};
> +			};
> +
> +			port@1 {
> +				reg = <1>;
> +				adv7511_out: endpoint {
> +					remote-endpoint = <&hdmi_con_out>;
> +				};
> +			};
> +		};
> +	};
>  };
> 
>  &pfc {

With patches 5/7, 6/7 and 7/7 merged together and the pinmux removed,

Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>

-- 
Regards,

Laurent Pinchart



_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

  reply	other threads:[~2018-04-06 13:51 UTC|newest]

Thread overview: 34+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-04-06 13:08 [PATCH v7 0/2] drm: Add Thine THC63LVD1024 LVDS decoder bridge Jacopo Mondi
2018-04-06 13:08 ` [PATCH 1/7] arm64: dts: renesas: r8a77970: add FCPVD support Jacopo Mondi
2018-04-06 13:28   ` Laurent Pinchart
2018-04-06 13:28     ` Laurent Pinchart
2018-04-09 12:19     ` Simon Horman
2018-04-06 13:08 ` [PATCH 2/7] arm64: dts: renesas: r8a77970: add VSPD support Jacopo Mondi
2018-04-06 13:33   ` Laurent Pinchart
2018-04-06 13:33     ` Laurent Pinchart
2018-04-09 12:21     ` Simon Horman
2018-04-06 13:08 ` [PATCH 3/7] arm64: dts: renesas: r8a77970: add DU support Jacopo Mondi
2018-04-06 13:36   ` Laurent Pinchart
2018-04-06 13:36     ` Laurent Pinchart
2018-04-06 13:08 ` [PATCH 4/7] arm64: dts: renesas: r8a77970: add the LVDS instance Jacopo Mondi
2018-04-06 13:38   ` Laurent Pinchart
2018-04-06 13:38     ` Laurent Pinchart
2018-04-06 13:08 ` [PATCH 5/7] arm64: dts: renesas: eagle: Enable DU Jacopo Mondi
2018-04-06 13:45   ` Laurent Pinchart
2018-04-06 13:45     ` Laurent Pinchart
2018-04-06 13:47     ` Laurent Pinchart
2018-04-06 13:47       ` Laurent Pinchart
2018-04-06 13:08 ` [PATCH 6/7] arm64: dts: renesas: eagle: Add LVDS decoder Jacopo Mondi
2018-04-06 13:49   ` Laurent Pinchart
2018-04-06 13:49     ` Laurent Pinchart
2018-04-06 13:08 ` [PATCH 7/7] arm64: dts: renesas: eagle: Add ADV7511W and HDMI output Jacopo Mondi
2018-04-06 13:51   ` Laurent Pinchart [this message]
2018-04-06 13:51     ` Laurent Pinchart
2018-04-06 14:16     ` jacopo mondi
2018-04-06 14:16       ` jacopo mondi
2018-04-06 13:17 ` [PATCH v7 0/2] drm: Add Thine THC63LVD1024 LVDS decoder bridge jacopo mondi
2018-04-06 13:17   ` jacopo mondi
2018-04-06 13:53 ` Laurent Pinchart
2018-04-06 13:53   ` Laurent Pinchart
2018-04-06 14:13   ` jacopo mondi
2018-04-06 14:13     ` jacopo mondi

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=2235860.8H9ojNphtF@avalon \
    --to=laurent.pinchart@ideasonboard.com \
    --cc=devicetree@vger.kernel.org \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=geert@linux-m68k.org \
    --cc=horms@verge.net.au \
    --cc=jacopo+renesas@jmondi.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-renesas-soc@vger.kernel.org \
    --cc=magnus.damm@gmail.com \
    --cc=niklas.soderlund+renesas@ragnatech.se \
    --cc=niklas.soderlund@ragnatech.se \
    --cc=sergei.shtylyov@cogentembedded.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.