From: Connor McAdams <conmanx360@gmail.com> To: unlisted-recipients:; (no To-header on input) Cc: o-takashi@sakamocchi.jp, "Connor McAdams" <conmanx360@gmail.com>, "Jaroslav Kysela" <perex@perex.cz>, "Takashi Iwai" <tiwai@suse.com>, "Jérémy Lefaure" <jeremy.lefaure@lse.epita.fr>, alsa-devel@alsa-project.org, linux-kernel@vger.kernel.org Subject: [PATCH v5 00/13] ALSA: hda/ca0132: Patch Series for Recon3Di and Sound Blaster Z Support Date: Tue, 8 May 2018 13:20:00 -0400 [thread overview] Message-ID: <1525800015-2920-1-git-send-email-conmanx360@gmail.com> (raw) This patchset adds support for the Sound Blaster Z and the Recon3Di. In order to figure out how to get these cards to work, I made a program called QemuHDADump[1], which uses the trace function of qemu to see interactions with the memory mapped pci BAR space of the card being used in the virtual machine. With this, I obtain the CORB buffer location to get the command verbs, and then dump them each time the buffer rolls over. This program may be useful for fixing other HDA related driver issues where there is no documentation for the device. So far, I have been able to get all features supported on the Sound Blaster Z and the Recon3Di. All output and input effects work, all inputs and outputs work, and just about anything else I can think of. I have also added new controls in order to select the new inputs and outputs, as well as controls to change the effect levels and presets. I have also added the ability to use firmware taken from the Windows drivers of both the Sound Blaster Z and Recon3Di. I am trying to get into contact with Creative to get permission to redistribute these along with the current file included with the Chromebook, but they have not been very responsive. Luckily, the cards work with the Chromebook firmware just fine, although I believe there has to be a reason they have different firmware in Windows. I will not link to the firmwares here, but if you look up my thread on Creative Labs forums, you will find the link to download the firmwares there. I am willing to help get the other non-working cards such as the ZxR and the newer AE-5 working too, but I will need someone willing to run QemuHDADump in a virtual machine in order to get the commands. So, in summary: -This patchset makes the cards work better than they did before (they really didn't work before) -This patchset leaves the original chromebook related stuff alone. Thanks. [1] https://github.com/Conmanx360/QemuHDADump Bugs: ------------------------------------------------------------------------------- Recon3Di: (Reported by Mariusz Ceier) ******************* -Occasionally switching between rear and front mic breaks the input until computer is shutdown or put to sleep. -Surround Sound works, but is inconsistent. Sometimes, just updating the volume fixes it, and sometimes, it requires a restart. Sound Blaster Z: ******************* -none that I'm aware of. Version changes: ------------------------------------------------------------------------------- v1: ******************* -Massive patch formatting failure, please ignore v1. v2: ******************* -Fixed patch formatting failure. v3: ******************* -Fixed mem_base unmap, instead of checking for QUIRK_SBZ on exit, have it check if the area is mapped, and if it is, unmap it. Also make it unmap after all other commands are finished. -Change notification of failure to map mem_base from codec_dbg to codec_warn, and use codec_info to tell the user that their card might have been incorrectly identified as a Sound Blaster Z. -Remove commented out commands in sbz_exit_chip function, only reintroduce them when their functions are defined. v4: ******************* -Split patch into smaller pieces. -Added const to alt_out_presets array. -Fixed command that was commented out and only put it in when it was actually used. v5: ******************* -Fixed issue identified by kbuild test robot, where patch 12 didn't compile individually. Connor McAdams (13): ALSA: hda/ca0132: R3Di and SBZ quirk entires + alt firmware loading ALSA: hda/ca0132: Add pincfg for SBZ + R3Di, add fp hp auto-detect ALSA: hda/ca0132: Add PCI region2 iomap for SBZ ALSA: hda/ca0132: Add extra exit functions for R3Di and SBZ ALSA: hda/ca0132: add extra init functions for r3di + sbz ALSA: hda/ca0132: update core functions for sbz + r3di ALSA: hda/ca0132: add dsp setup related commands for the sbz ALSA: hda/ca0132: Add dsp setup + gpio functions for r3di ALSA: hda/ca0132: add the ability to set src_id on scp commands ALSA: hda/ca0132: add alt_select_in/out for R3Di + SBZ ALSA: hda/ca0132: Add DSP Volume set and New mixers for SBZ + R3Di ALSA: hda/ca0132: add ca0132_alt_set_vipsource ALSA: hda/ca0132: Add new control changes for SBZ + R3Di sound/pci/hda/patch_ca0132.c | 3057 ++++++++++++++++++++++++++++++++++++++++-- 1 file changed, 2941 insertions(+), 116 deletions(-) -- 2.7.4
WARNING: multiple messages have this Message-ID (diff)
From: Connor McAdams <conmanx360@gmail.com> Cc: o-takashi@sakamocchi.jp, "Connor McAdams" <conmanx360@gmail.com>, "Jaroslav Kysela" <perex@perex.cz>, "Takashi Iwai" <tiwai@suse.com>, "Jérémy Lefaure" <jeremy.lefaure@lse.epita.fr>, alsa-devel@alsa-project.org, linux-kernel@vger.kernel.org Subject: [PATCH v5 00/13] ALSA: hda/ca0132: Patch Series for Recon3Di and Sound Blaster Z Support Date: Tue, 8 May 2018 13:20:00 -0400 [thread overview] Message-ID: <1525800015-2920-1-git-send-email-conmanx360@gmail.com> (raw) This patchset adds support for the Sound Blaster Z and the Recon3Di. In order to figure out how to get these cards to work, I made a program called QemuHDADump[1], which uses the trace function of qemu to see interactions with the memory mapped pci BAR space of the card being used in the virtual machine. With this, I obtain the CORB buffer location to get the command verbs, and then dump them each time the buffer rolls over. This program may be useful for fixing other HDA related driver issues where there is no documentation for the device. So far, I have been able to get all features supported on the Sound Blaster Z and the Recon3Di. All output and input effects work, all inputs and outputs work, and just about anything else I can think of. I have also added new controls in order to select the new inputs and outputs, as well as controls to change the effect levels and presets. I have also added the ability to use firmware taken from the Windows drivers of both the Sound Blaster Z and Recon3Di. I am trying to get into contact with Creative to get permission to redistribute these along with the current file included with the Chromebook, but they have not been very responsive. Luckily, the cards work with the Chromebook firmware just fine, although I believe there has to be a reason they have different firmware in Windows. I will not link to the firmwares here, but if you look up my thread on Creative Labs forums, you will find the link to download the firmwares there. I am willing to help get the other non-working cards such as the ZxR and the newer AE-5 working too, but I will need someone willing to run QemuHDADump in a virtual machine in order to get the commands. So, in summary: -This patchset makes the cards work better than they did before (they really didn't work before) -This patchset leaves the original chromebook related stuff alone. Thanks. [1] https://github.com/Conmanx360/QemuHDADump Bugs: ------------------------------------------------------------------------------- Recon3Di: (Reported by Mariusz Ceier) ******************* -Occasionally switching between rear and front mic breaks the input until computer is shutdown or put to sleep. -Surround Sound works, but is inconsistent. Sometimes, just updating the volume fixes it, and sometimes, it requires a restart. Sound Blaster Z: ******************* -none that I'm aware of. Version changes: ------------------------------------------------------------------------------- v1: ******************* -Massive patch formatting failure, please ignore v1. v2: ******************* -Fixed patch formatting failure. v3: ******************* -Fixed mem_base unmap, instead of checking for QUIRK_SBZ on exit, have it check if the area is mapped, and if it is, unmap it. Also make it unmap after all other commands are finished. -Change notification of failure to map mem_base from codec_dbg to codec_warn, and use codec_info to tell the user that their card might have been incorrectly identified as a Sound Blaster Z. -Remove commented out commands in sbz_exit_chip function, only reintroduce them when their functions are defined. v4: ******************* -Split patch into smaller pieces. -Added const to alt_out_presets array. -Fixed command that was commented out and only put it in when it was actually used. v5: ******************* -Fixed issue identified by kbuild test robot, where patch 12 didn't compile individually. Connor McAdams (13): ALSA: hda/ca0132: R3Di and SBZ quirk entires + alt firmware loading ALSA: hda/ca0132: Add pincfg for SBZ + R3Di, add fp hp auto-detect ALSA: hda/ca0132: Add PCI region2 iomap for SBZ ALSA: hda/ca0132: Add extra exit functions for R3Di and SBZ ALSA: hda/ca0132: add extra init functions for r3di + sbz ALSA: hda/ca0132: update core functions for sbz + r3di ALSA: hda/ca0132: add dsp setup related commands for the sbz ALSA: hda/ca0132: Add dsp setup + gpio functions for r3di ALSA: hda/ca0132: add the ability to set src_id on scp commands ALSA: hda/ca0132: add alt_select_in/out for R3Di + SBZ ALSA: hda/ca0132: Add DSP Volume set and New mixers for SBZ + R3Di ALSA: hda/ca0132: add ca0132_alt_set_vipsource ALSA: hda/ca0132: Add new control changes for SBZ + R3Di sound/pci/hda/patch_ca0132.c | 3057 ++++++++++++++++++++++++++++++++++++++++-- 1 file changed, 2941 insertions(+), 116 deletions(-) -- 2.7.4
next reply other threads:[~2018-05-08 17:20 UTC|newest] Thread overview: 31+ messages / expand[flat|nested] mbox.gz Atom feed top 2018-05-08 17:20 Connor McAdams [this message] 2018-05-08 17:20 ` [PATCH v5 00/13] ALSA: hda/ca0132: Patch Series for Recon3Di and Sound Blaster Z Support Connor McAdams 2018-05-08 17:20 ` [PATCH v5 01/13] ALSA: hda/ca0132: R3Di and SBZ quirk entires + alt firmware loading Connor McAdams 2018-05-08 17:20 ` Connor McAdams 2018-05-08 17:20 ` [PATCH v5 02/13] ALSA: hda/ca0132: Add pincfg for SBZ + R3Di, add fp hp auto-detect Connor McAdams 2018-05-08 17:20 ` Connor McAdams 2018-05-08 17:20 ` [PATCH v5 03/13] ALSA: hda/ca0132: Add PCI region2 iomap for SBZ Connor McAdams 2018-05-08 17:20 ` Connor McAdams 2018-05-13 7:18 ` Takashi Iwai 2018-05-08 17:20 ` [PATCH v5 04/13] ALSA: hda/ca0132: Add extra exit functions for R3Di and SBZ Connor McAdams 2018-05-08 17:20 ` Connor McAdams 2018-05-08 17:20 ` [PATCH v5 05/13] ALSA: hda/ca0132: add extra init functions for r3di + sbz Connor McAdams 2018-05-08 17:20 ` Connor McAdams 2018-05-08 17:20 ` [PATCH v5 06/13] ALSA: hda/ca0132: update core functions for sbz + r3di Connor McAdams 2018-05-08 17:20 ` Connor McAdams 2018-05-08 17:20 ` [PATCH v5 07/13] ALSA: hda/ca0132: add dsp setup related commands for the sbz Connor McAdams 2018-05-08 17:20 ` Connor McAdams 2018-05-08 17:20 ` [PATCH v5 08/13] ALSA: hda/ca0132: Add dsp setup + gpio functions for r3di Connor McAdams 2018-05-08 17:20 ` Connor McAdams 2018-05-08 17:20 ` [PATCH v5 09/13] ALSA: hda/ca0132: add the ability to set src_id on scp commands Connor McAdams 2018-05-08 17:20 ` Connor McAdams 2018-05-08 17:20 ` [PATCH v5 10/13] ALSA: hda/ca0132: add alt_select_in/out for R3Di + SBZ Connor McAdams 2018-05-08 17:20 ` Connor McAdams 2018-05-08 17:20 ` [PATCH v5 11/13] ALSA: hda/ca0132: Add DSP Volume set and New mixers for SBZ + R3Di Connor McAdams 2018-05-08 17:20 ` Connor McAdams 2018-05-08 17:20 ` [PATCH v5 12/13] ALSA: hda/ca0132: add ca0132_alt_set_vipsource Connor McAdams 2018-05-08 17:20 ` Connor McAdams 2018-05-08 17:20 ` [PATCH v5 13/13] ALSA: hda/ca0132: Add new control changes for SBZ + R3Di Connor McAdams 2018-05-08 17:20 ` Connor McAdams 2018-05-11 1:27 ` [PATCH v5 00/13] ALSA: hda/ca0132: Patch Series for Recon3Di and Sound Blaster Z Support Takashi Sakamoto 2018-05-13 7:32 ` Takashi Iwai
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1525800015-2920-1-git-send-email-conmanx360@gmail.com \ --to=conmanx360@gmail.com \ --cc=alsa-devel@alsa-project.org \ --cc=jeremy.lefaure@lse.epita.fr \ --cc=linux-kernel@vger.kernel.org \ --cc=o-takashi@sakamocchi.jp \ --cc=perex@perex.cz \ --cc=tiwai@suse.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.