From: Connor McAdams <conmanx360@gmail.com> To: unlisted-recipients:; (no To-header on input) Cc: o-takashi@sakamocchi.jp, "Connor McAdams" <conmanx360@gmail.com>, "Jaroslav Kysela" <perex@perex.cz>, "Takashi Iwai" <tiwai@suse.com>, "Jérémy Lefaure" <jeremy.lefaure@lse.epita.fr>, alsa-devel@alsa-project.org, linux-kernel@vger.kernel.org Subject: [PATCH v5 02/13] ALSA: hda/ca0132: Add pincfg for SBZ + R3Di, add fp hp auto-detect Date: Tue, 8 May 2018 13:20:02 -0400 [thread overview] Message-ID: <1525800015-2920-3-git-send-email-conmanx360@gmail.com> (raw) In-Reply-To: <1525800015-2920-1-git-send-email-conmanx360@gmail.com> This patch adds an unsolicited response tag for the front headphone panel which uses the same hp_callback as the rear headphone detection. This patch also adds pincfgs for the R3Di and SBZ which were taken from the Windows driver. The pins are also defined in the function ca0132_config. Both the R3Di and SBZ are also given a max out channel value of 6 to handle 5.1 surround sound in later patches. Signed-off-by: Connor McAdams <conmanx360@gmail.com> --- sound/pci/hda/patch_ca0132.c | 111 +++++++++++++++++++++++++++++++++++++++++-- 1 file changed, 108 insertions(+), 3 deletions(-) diff --git a/sound/pci/hda/patch_ca0132.c b/sound/pci/hda/patch_ca0132.c index 8346100..02238fe 100644 --- a/sound/pci/hda/patch_ca0132.c +++ b/sound/pci/hda/patch_ca0132.c @@ -723,6 +723,7 @@ struct ca0132_spec { hda_nid_t shared_mic_nid; hda_nid_t shared_out_nid; hda_nid_t unsol_tag_hp; + hda_nid_t unsol_tag_front_hp; /* for desktop ca0132 codecs */ hda_nid_t unsol_tag_amic1; /* chip access */ @@ -785,6 +786,36 @@ static const struct hda_pintbl alienware_pincfgs[] = { {} }; +/* Sound Blaster Z pin configs taken from Windows Driver */ +static const struct hda_pintbl sbz_pincfgs[] = { + { 0x0b, 0x01017010 }, /* Port G -- Lineout FRONT L/R */ + { 0x0c, 0x014510f0 }, /* SPDIF Out 1 */ + { 0x0d, 0x014510f0 }, /* Digital Out */ + { 0x0e, 0x01c510f0 }, /* SPDIF In */ + { 0x0f, 0x0221701f }, /* Port A -- BackPanel HP */ + { 0x10, 0x01017012 }, /* Port D -- Center/LFE or FP Hp */ + { 0x11, 0x01017014 }, /* Port B -- LineMicIn2 / Rear L/R */ + { 0x12, 0x01a170f0 }, /* Port C -- LineIn1 */ + { 0x13, 0x908700f0 }, /* What U Hear In*/ + { 0x18, 0x50d000f0 }, /* N/A */ + {} +}; + +/* Recon3D integrated pin configs taken from Windows Driver */ +static const struct hda_pintbl r3di_pincfgs[] = { + { 0x0b, 0x01014110 }, /* Port G -- Lineout FRONT L/R */ + { 0x0c, 0x014510f0 }, /* SPDIF Out 1 */ + { 0x0d, 0x014510f0 }, /* Digital Out */ + { 0x0e, 0x41c520f0 }, /* SPDIF In */ + { 0x0f, 0x0221401f }, /* Port A -- BackPanel HP */ + { 0x10, 0x01016011 }, /* Port D -- Center/LFE or FP Hp */ + { 0x11, 0x01011014 }, /* Port B -- LineMicIn2 / Rear L/R */ + { 0x12, 0x02a090f0 }, /* Port C -- LineIn1 */ + { 0x13, 0x908700f0 }, /* What U Hear In*/ + { 0x18, 0x500000f0 }, /* N/A */ + {} +}; + static const struct snd_pci_quirk ca0132_quirks[] = { SND_PCI_QUIRK(0x1028, 0x0685, "Alienware 15 2015", QUIRK_ALIENWARE), SND_PCI_QUIRK(0x1028, 0x0688, "Alienware 17 2015", QUIRK_ALIENWARE), @@ -4503,6 +4534,10 @@ static void ca0132_init_unsol(struct hda_codec *codec) amic_callback); snd_hda_jack_detect_enable_callback(codec, UNSOL_TAG_DSP, ca0132_process_dsp_response); + /* Front headphone jack detection */ + if (spec->quirk == QUIRK_SBZ || spec->quirk == QUIRK_R3DI) + snd_hda_jack_detect_enable_callback(codec, + spec->unsol_tag_front_hp, hp_callback); } /* @@ -4684,9 +4719,14 @@ static void ca0132_config(struct hda_codec *codec) spec->multiout.dac_nids = spec->dacs; spec->multiout.num_dacs = 3; - spec->multiout.max_channels = 2; - if (spec->quirk == QUIRK_ALIENWARE) { + if (spec->quirk == QUIRK_NONE || spec->quirk == QUIRK_ALIENWARE) + spec->multiout.max_channels = 2; + else + spec->multiout.max_channels = 6; + + switch (spec->quirk) { + case QUIRK_ALIENWARE: codec_dbg(codec, "ca0132_config: QUIRK_ALIENWARE applied.\n"); snd_hda_apply_pincfgs(codec, alienware_pincfgs); @@ -4706,7 +4746,71 @@ static void ca0132_config(struct hda_codec *codec) spec->input_pins[2] = 0x13; spec->shared_mic_nid = 0x7; spec->unsol_tag_amic1 = 0x11; - } else { + break; + case QUIRK_SBZ: + codec_dbg(codec, "%s: QUIRK_SBZ applied.\n", __func__); + snd_hda_apply_pincfgs(codec, sbz_pincfgs); + + spec->num_outputs = 2; + spec->out_pins[0] = 0x0B; /* Line out */ + spec->out_pins[1] = 0x0F; /* Rear headphone out */ + spec->out_pins[2] = 0x10; /* Front Headphone / Center/LFE*/ + spec->out_pins[3] = 0x11; /* Rear surround */ + spec->shared_out_nid = 0x2; + spec->unsol_tag_hp = spec->out_pins[1]; + spec->unsol_tag_front_hp = spec->out_pins[2]; + + spec->adcs[0] = 0x7; /* Rear Mic / Line-in */ + spec->adcs[1] = 0x8; /* Front Mic, but only if no DSP */ + spec->adcs[2] = 0xa; /* what u hear */ + + spec->num_inputs = 2; + spec->input_pins[0] = 0x12; /* Rear Mic / Line-in */ + spec->input_pins[1] = 0x13; /* What U Hear */ + spec->shared_mic_nid = 0x7; + spec->unsol_tag_amic1 = spec->input_pins[0]; + + /* SPDIF I/O */ + spec->dig_out = 0x05; + spec->multiout.dig_out_nid = spec->dig_out; + cfg->dig_out_pins[0] = 0x0c; + cfg->dig_outs = 1; + cfg->dig_out_type[0] = HDA_PCM_TYPE_SPDIF; + spec->dig_in = 0x09; + cfg->dig_in_pin = 0x0e; + cfg->dig_in_type = HDA_PCM_TYPE_SPDIF; + break; + case QUIRK_R3DI: + codec_dbg(codec, "%s: QUIRK_R3DI applied.\n", __func__); + snd_hda_apply_pincfgs(codec, r3di_pincfgs); + + spec->num_outputs = 2; + spec->out_pins[0] = 0x0B; /* Line out */ + spec->out_pins[1] = 0x0F; /* Rear headphone out */ + spec->out_pins[2] = 0x10; /* Front Headphone / Center/LFE*/ + spec->out_pins[3] = 0x11; /* Rear surround */ + spec->shared_out_nid = 0x2; + spec->unsol_tag_hp = spec->out_pins[1]; + spec->unsol_tag_front_hp = spec->out_pins[2]; + + spec->adcs[0] = 0x07; /* Rear Mic / Line-in */ + spec->adcs[1] = 0x08; /* Front Mic, but only if no DSP */ + spec->adcs[2] = 0x0a; /* what u hear */ + + spec->num_inputs = 2; + spec->input_pins[0] = 0x12; /* Rear Mic / Line-in */ + spec->input_pins[1] = 0x13; /* What U Hear */ + spec->shared_mic_nid = 0x7; + spec->unsol_tag_amic1 = spec->input_pins[0]; + + /* SPDIF I/O */ + spec->dig_out = 0x05; + spec->multiout.dig_out_nid = spec->dig_out; + cfg->dig_out_pins[0] = 0x0c; + cfg->dig_outs = 1; + cfg->dig_out_type[0] = HDA_PCM_TYPE_SPDIF; + break; + default: spec->num_outputs = 2; spec->out_pins[0] = 0x0b; /* speaker out */ spec->out_pins[1] = 0x10; /* headphone out */ @@ -4733,6 +4837,7 @@ static void ca0132_config(struct hda_codec *codec) spec->dig_in = 0x09; cfg->dig_in_pin = 0x0e; cfg->dig_in_type = HDA_PCM_TYPE_SPDIF; + break; } } -- 2.7.4
WARNING: multiple messages have this Message-ID (diff)
From: Connor McAdams <conmanx360@gmail.com> Cc: alsa-devel@alsa-project.org, linux-kernel@vger.kernel.org, "Takashi Iwai" <tiwai@suse.com>, "Jérémy Lefaure" <jeremy.lefaure@lse.epita.fr>, "Connor McAdams" <conmanx360@gmail.com>, o-takashi@sakamocchi.jp Subject: [PATCH v5 02/13] ALSA: hda/ca0132: Add pincfg for SBZ + R3Di, add fp hp auto-detect Date: Tue, 8 May 2018 13:20:02 -0400 [thread overview] Message-ID: <1525800015-2920-3-git-send-email-conmanx360@gmail.com> (raw) In-Reply-To: <1525800015-2920-1-git-send-email-conmanx360@gmail.com> This patch adds an unsolicited response tag for the front headphone panel which uses the same hp_callback as the rear headphone detection. This patch also adds pincfgs for the R3Di and SBZ which were taken from the Windows driver. The pins are also defined in the function ca0132_config. Both the R3Di and SBZ are also given a max out channel value of 6 to handle 5.1 surround sound in later patches. Signed-off-by: Connor McAdams <conmanx360@gmail.com> --- sound/pci/hda/patch_ca0132.c | 111 +++++++++++++++++++++++++++++++++++++++++-- 1 file changed, 108 insertions(+), 3 deletions(-) diff --git a/sound/pci/hda/patch_ca0132.c b/sound/pci/hda/patch_ca0132.c index 8346100..02238fe 100644 --- a/sound/pci/hda/patch_ca0132.c +++ b/sound/pci/hda/patch_ca0132.c @@ -723,6 +723,7 @@ struct ca0132_spec { hda_nid_t shared_mic_nid; hda_nid_t shared_out_nid; hda_nid_t unsol_tag_hp; + hda_nid_t unsol_tag_front_hp; /* for desktop ca0132 codecs */ hda_nid_t unsol_tag_amic1; /* chip access */ @@ -785,6 +786,36 @@ static const struct hda_pintbl alienware_pincfgs[] = { {} }; +/* Sound Blaster Z pin configs taken from Windows Driver */ +static const struct hda_pintbl sbz_pincfgs[] = { + { 0x0b, 0x01017010 }, /* Port G -- Lineout FRONT L/R */ + { 0x0c, 0x014510f0 }, /* SPDIF Out 1 */ + { 0x0d, 0x014510f0 }, /* Digital Out */ + { 0x0e, 0x01c510f0 }, /* SPDIF In */ + { 0x0f, 0x0221701f }, /* Port A -- BackPanel HP */ + { 0x10, 0x01017012 }, /* Port D -- Center/LFE or FP Hp */ + { 0x11, 0x01017014 }, /* Port B -- LineMicIn2 / Rear L/R */ + { 0x12, 0x01a170f0 }, /* Port C -- LineIn1 */ + { 0x13, 0x908700f0 }, /* What U Hear In*/ + { 0x18, 0x50d000f0 }, /* N/A */ + {} +}; + +/* Recon3D integrated pin configs taken from Windows Driver */ +static const struct hda_pintbl r3di_pincfgs[] = { + { 0x0b, 0x01014110 }, /* Port G -- Lineout FRONT L/R */ + { 0x0c, 0x014510f0 }, /* SPDIF Out 1 */ + { 0x0d, 0x014510f0 }, /* Digital Out */ + { 0x0e, 0x41c520f0 }, /* SPDIF In */ + { 0x0f, 0x0221401f }, /* Port A -- BackPanel HP */ + { 0x10, 0x01016011 }, /* Port D -- Center/LFE or FP Hp */ + { 0x11, 0x01011014 }, /* Port B -- LineMicIn2 / Rear L/R */ + { 0x12, 0x02a090f0 }, /* Port C -- LineIn1 */ + { 0x13, 0x908700f0 }, /* What U Hear In*/ + { 0x18, 0x500000f0 }, /* N/A */ + {} +}; + static const struct snd_pci_quirk ca0132_quirks[] = { SND_PCI_QUIRK(0x1028, 0x0685, "Alienware 15 2015", QUIRK_ALIENWARE), SND_PCI_QUIRK(0x1028, 0x0688, "Alienware 17 2015", QUIRK_ALIENWARE), @@ -4503,6 +4534,10 @@ static void ca0132_init_unsol(struct hda_codec *codec) amic_callback); snd_hda_jack_detect_enable_callback(codec, UNSOL_TAG_DSP, ca0132_process_dsp_response); + /* Front headphone jack detection */ + if (spec->quirk == QUIRK_SBZ || spec->quirk == QUIRK_R3DI) + snd_hda_jack_detect_enable_callback(codec, + spec->unsol_tag_front_hp, hp_callback); } /* @@ -4684,9 +4719,14 @@ static void ca0132_config(struct hda_codec *codec) spec->multiout.dac_nids = spec->dacs; spec->multiout.num_dacs = 3; - spec->multiout.max_channels = 2; - if (spec->quirk == QUIRK_ALIENWARE) { + if (spec->quirk == QUIRK_NONE || spec->quirk == QUIRK_ALIENWARE) + spec->multiout.max_channels = 2; + else + spec->multiout.max_channels = 6; + + switch (spec->quirk) { + case QUIRK_ALIENWARE: codec_dbg(codec, "ca0132_config: QUIRK_ALIENWARE applied.\n"); snd_hda_apply_pincfgs(codec, alienware_pincfgs); @@ -4706,7 +4746,71 @@ static void ca0132_config(struct hda_codec *codec) spec->input_pins[2] = 0x13; spec->shared_mic_nid = 0x7; spec->unsol_tag_amic1 = 0x11; - } else { + break; + case QUIRK_SBZ: + codec_dbg(codec, "%s: QUIRK_SBZ applied.\n", __func__); + snd_hda_apply_pincfgs(codec, sbz_pincfgs); + + spec->num_outputs = 2; + spec->out_pins[0] = 0x0B; /* Line out */ + spec->out_pins[1] = 0x0F; /* Rear headphone out */ + spec->out_pins[2] = 0x10; /* Front Headphone / Center/LFE*/ + spec->out_pins[3] = 0x11; /* Rear surround */ + spec->shared_out_nid = 0x2; + spec->unsol_tag_hp = spec->out_pins[1]; + spec->unsol_tag_front_hp = spec->out_pins[2]; + + spec->adcs[0] = 0x7; /* Rear Mic / Line-in */ + spec->adcs[1] = 0x8; /* Front Mic, but only if no DSP */ + spec->adcs[2] = 0xa; /* what u hear */ + + spec->num_inputs = 2; + spec->input_pins[0] = 0x12; /* Rear Mic / Line-in */ + spec->input_pins[1] = 0x13; /* What U Hear */ + spec->shared_mic_nid = 0x7; + spec->unsol_tag_amic1 = spec->input_pins[0]; + + /* SPDIF I/O */ + spec->dig_out = 0x05; + spec->multiout.dig_out_nid = spec->dig_out; + cfg->dig_out_pins[0] = 0x0c; + cfg->dig_outs = 1; + cfg->dig_out_type[0] = HDA_PCM_TYPE_SPDIF; + spec->dig_in = 0x09; + cfg->dig_in_pin = 0x0e; + cfg->dig_in_type = HDA_PCM_TYPE_SPDIF; + break; + case QUIRK_R3DI: + codec_dbg(codec, "%s: QUIRK_R3DI applied.\n", __func__); + snd_hda_apply_pincfgs(codec, r3di_pincfgs); + + spec->num_outputs = 2; + spec->out_pins[0] = 0x0B; /* Line out */ + spec->out_pins[1] = 0x0F; /* Rear headphone out */ + spec->out_pins[2] = 0x10; /* Front Headphone / Center/LFE*/ + spec->out_pins[3] = 0x11; /* Rear surround */ + spec->shared_out_nid = 0x2; + spec->unsol_tag_hp = spec->out_pins[1]; + spec->unsol_tag_front_hp = spec->out_pins[2]; + + spec->adcs[0] = 0x07; /* Rear Mic / Line-in */ + spec->adcs[1] = 0x08; /* Front Mic, but only if no DSP */ + spec->adcs[2] = 0x0a; /* what u hear */ + + spec->num_inputs = 2; + spec->input_pins[0] = 0x12; /* Rear Mic / Line-in */ + spec->input_pins[1] = 0x13; /* What U Hear */ + spec->shared_mic_nid = 0x7; + spec->unsol_tag_amic1 = spec->input_pins[0]; + + /* SPDIF I/O */ + spec->dig_out = 0x05; + spec->multiout.dig_out_nid = spec->dig_out; + cfg->dig_out_pins[0] = 0x0c; + cfg->dig_outs = 1; + cfg->dig_out_type[0] = HDA_PCM_TYPE_SPDIF; + break; + default: spec->num_outputs = 2; spec->out_pins[0] = 0x0b; /* speaker out */ spec->out_pins[1] = 0x10; /* headphone out */ @@ -4733,6 +4837,7 @@ static void ca0132_config(struct hda_codec *codec) spec->dig_in = 0x09; cfg->dig_in_pin = 0x0e; cfg->dig_in_type = HDA_PCM_TYPE_SPDIF; + break; } } -- 2.7.4
next prev parent reply other threads:[~2018-05-08 17:24 UTC|newest] Thread overview: 31+ messages / expand[flat|nested] mbox.gz Atom feed top 2018-05-08 17:20 [PATCH v5 00/13] ALSA: hda/ca0132: Patch Series for Recon3Di and Sound Blaster Z Support Connor McAdams 2018-05-08 17:20 ` Connor McAdams 2018-05-08 17:20 ` [PATCH v5 01/13] ALSA: hda/ca0132: R3Di and SBZ quirk entires + alt firmware loading Connor McAdams 2018-05-08 17:20 ` Connor McAdams 2018-05-08 17:20 ` Connor McAdams [this message] 2018-05-08 17:20 ` [PATCH v5 02/13] ALSA: hda/ca0132: Add pincfg for SBZ + R3Di, add fp hp auto-detect Connor McAdams 2018-05-08 17:20 ` [PATCH v5 03/13] ALSA: hda/ca0132: Add PCI region2 iomap for SBZ Connor McAdams 2018-05-08 17:20 ` Connor McAdams 2018-05-13 7:18 ` Takashi Iwai 2018-05-08 17:20 ` [PATCH v5 04/13] ALSA: hda/ca0132: Add extra exit functions for R3Di and SBZ Connor McAdams 2018-05-08 17:20 ` Connor McAdams 2018-05-08 17:20 ` [PATCH v5 05/13] ALSA: hda/ca0132: add extra init functions for r3di + sbz Connor McAdams 2018-05-08 17:20 ` Connor McAdams 2018-05-08 17:20 ` [PATCH v5 06/13] ALSA: hda/ca0132: update core functions for sbz + r3di Connor McAdams 2018-05-08 17:20 ` Connor McAdams 2018-05-08 17:20 ` [PATCH v5 07/13] ALSA: hda/ca0132: add dsp setup related commands for the sbz Connor McAdams 2018-05-08 17:20 ` Connor McAdams 2018-05-08 17:20 ` [PATCH v5 08/13] ALSA: hda/ca0132: Add dsp setup + gpio functions for r3di Connor McAdams 2018-05-08 17:20 ` Connor McAdams 2018-05-08 17:20 ` [PATCH v5 09/13] ALSA: hda/ca0132: add the ability to set src_id on scp commands Connor McAdams 2018-05-08 17:20 ` Connor McAdams 2018-05-08 17:20 ` [PATCH v5 10/13] ALSA: hda/ca0132: add alt_select_in/out for R3Di + SBZ Connor McAdams 2018-05-08 17:20 ` Connor McAdams 2018-05-08 17:20 ` [PATCH v5 11/13] ALSA: hda/ca0132: Add DSP Volume set and New mixers for SBZ + R3Di Connor McAdams 2018-05-08 17:20 ` Connor McAdams 2018-05-08 17:20 ` [PATCH v5 12/13] ALSA: hda/ca0132: add ca0132_alt_set_vipsource Connor McAdams 2018-05-08 17:20 ` Connor McAdams 2018-05-08 17:20 ` [PATCH v5 13/13] ALSA: hda/ca0132: Add new control changes for SBZ + R3Di Connor McAdams 2018-05-08 17:20 ` Connor McAdams 2018-05-11 1:27 ` [PATCH v5 00/13] ALSA: hda/ca0132: Patch Series for Recon3Di and Sound Blaster Z Support Takashi Sakamoto 2018-05-13 7:32 ` Takashi Iwai
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1525800015-2920-3-git-send-email-conmanx360@gmail.com \ --to=conmanx360@gmail.com \ --cc=alsa-devel@alsa-project.org \ --cc=jeremy.lefaure@lse.epita.fr \ --cc=linux-kernel@vger.kernel.org \ --cc=o-takashi@sakamocchi.jp \ --cc=perex@perex.cz \ --cc=tiwai@suse.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.