From: Jolly Shah <jolly.shah@xilinx.com>
To: <ard.biesheuvel@linaro.org>, <mingo@kernel.org>,
<gregkh@linuxfoundation.org>, <matt@codeblueprint.co.uk>,
<sudeep.holla@arm.com>, <hkallweit1@gmail.com>,
<keescook@chromium.org>, <dmitry.torokhov@gmail.com>,
<mturquette@baylibre.com>, <sboyd@codeaurora.org>,
<michal.simek@xilinx.com>, <robh+dt@kernel.org>,
<mark.rutland@arm.com>, <linux-clk@vger.kernel.org>
Cc: <rajanv@xilinx.com>, <linux-arm-kernel@lists.infradead.org>,
<linux-kernel@vger.kernel.org>, <devicetree@vger.kernel.org>,
Jolly Shah <jollys@xilinx.com>
Subject: [PATCH v11 00/11] drivers: Introduce firmware dnd clock river for ZynqMP core
Date: Fri, 3 Aug 2018 10:53:17 -0700 [thread overview]
Message-ID: <1533318808-10781-1-git-send-email-jollys@xilinx.com> (raw)
This patchset is adding communication layer with firmware and clock driver who uses
those APIs to communicate with PMU.
Firmware driver provides an interface to firmware APIs.Interface APIs can be used by any driver to communicate to
PMUFW(Platform Management Unit). All requests go through ATF.
This patchset adds CCF compliant clock driver for ZynqMP.Clock driver queries supported clock information from
firmware and regiters pll and output clocks with CCF.
v11:
- Removed "Reveiwed-by:Stephen Boyd" tag from firmware binding
- Updated clock and firmware driver to use probe method instead of init
- Marked PMU payload arguments with __le32 for proper endienness code
v10:
- Incorporated code review comments from v9 patch series. Discussed below:
https://patchwork.kernel.org/patch/10478575/
https://patchwork.kernel.org/patch/10478457/
https://patchwork.kernel.org/patch/10478461/
https://patchwork.kernel.org/patch/10478463/
v9:
- Fixed minor typo comments
v8:
- Corrected typo in clk Kconfig
v7:
- Removed xilinx specific clock debugfs API support
- Added reviewed-by tags for FW and clock bindings
- Updated clock node name to clock-controller
v6:
- Broke patch series to have base FW driver and Clock driver user
- Incorporated code review comments from last FW and Clock driver patch series. Discussed below:
https://patchwork.kernel.org/patch/10230759/
https://patchwork.kernel.org/patch/10250047/
v5:
- Added ATF version check support
- Updated some functions to be static
- Minor function name corrections
v4:
- Changed clock setrate/getrate API prototype to support 64 bit rate
- Defined macros for get_node_status return values
- Moved DT node as a child of firmware
- Changed debugfs APIs to return data to debugfs buffer instead of dumping to kernel log
- Minor changes to incorporate other review comments from v3 patch series
v3:
- added some fixes to firmware-ggs.c
- updated pinmux get/set function argument names to specify function id instead of node id
- added new pinctrl query macros
- incorporated review comments from v2 patch series
v2:
- change SPDX-License-Identifier license text style
- split patch into multiple patches
- Updated copyrights
- Added ABI documentation
- incorporated logical review comments from previuos patch. Discussed below:
https://patchwork.kernel.org/patch/10150665/
Jolly Shah (1):
drivers: clk: Add ZynqMP clock driver
Rajan Vaja (10):
dt-bindings: firmware: Add bindings for ZynqMP firmware
firmware: xilinx: Add Zynqmp firmware driver
firmware: xilinx: Add zynqmp IOCTL API for device control
firmware: xilinx: Add query data API
firmware: xilinx: Add clock APIs
firmware: xilinx: Add debugfs interface
firmware: xilinx: Add debugfs for IOCTL API
firmware: xilinx: Add debugfs for query data API
dt-bindings: clock: Add bindings for ZynqMP clock driver
firmware: xilinx: Replace init call with probe method
.../firmware/xilinx/xlnx,zynqmp-firmware.txt | 82 +++
arch/arm64/Kconfig.platforms | 1 +
drivers/clk/Kconfig | 1 +
drivers/clk/Makefile | 1 +
drivers/clk/zynqmp/Kconfig | 10 +
drivers/clk/zynqmp/Makefile | 4 +
drivers/clk/zynqmp/clk-gate-zynqmp.c | 144 +++++
drivers/clk/zynqmp/clk-mux-zynqmp.c | 141 ++++
drivers/clk/zynqmp/clk-zynqmp.h | 68 ++
drivers/clk/zynqmp/clkc.c | 716 +++++++++++++++++++++
drivers/clk/zynqmp/divider.c | 217 +++++++
drivers/clk/zynqmp/pll.c | 335 ++++++++++
drivers/firmware/Kconfig | 1 +
drivers/firmware/Makefile | 1 +
drivers/firmware/xilinx/Kconfig | 23 +
drivers/firmware/xilinx/Makefile | 5 +
drivers/firmware/xilinx/zynqmp-debug.c | 249 +++++++
drivers/firmware/xilinx/zynqmp-debug.h | 22 +
drivers/firmware/xilinx/zynqmp.c | 535 +++++++++++++++
include/dt-bindings/clock/xlnx,zynqmp-clk.h | 116 ++++
include/linux/firmware/xlnx-zynqmp.h | 116 ++++
21 files changed, 2788 insertions(+)
create mode 100644 Documentation/devicetree/bindings/firmware/xilinx/xlnx,zynqmp-firmware.txt
create mode 100644 drivers/clk/zynqmp/Kconfig
create mode 100644 drivers/clk/zynqmp/Makefile
create mode 100644 drivers/clk/zynqmp/clk-gate-zynqmp.c
create mode 100644 drivers/clk/zynqmp/clk-mux-zynqmp.c
create mode 100644 drivers/clk/zynqmp/clk-zynqmp.h
create mode 100644 drivers/clk/zynqmp/clkc.c
create mode 100644 drivers/clk/zynqmp/divider.c
create mode 100644 drivers/clk/zynqmp/pll.c
create mode 100644 drivers/firmware/xilinx/Kconfig
create mode 100644 drivers/firmware/xilinx/Makefile
create mode 100644 drivers/firmware/xilinx/zynqmp-debug.c
create mode 100644 drivers/firmware/xilinx/zynqmp-debug.h
create mode 100644 drivers/firmware/xilinx/zynqmp.c
create mode 100644 include/dt-bindings/clock/xlnx,zynqmp-clk.h
create mode 100644 include/linux/firmware/xlnx-zynqmp.h
--
2.7.4
WARNING: multiple messages have this Message-ID (diff)
From: Jolly Shah <jolly.shah@xilinx.com>
To: ard.biesheuvel@linaro.org, mingo@kernel.org,
gregkh@linuxfoundation.org, matt@codeblueprint.co.uk,
sudeep.holla@arm.com, hkallweit1@gmail.com,
keescook@chromium.org, dmitry.torokhov@gmail.com,
mturquette@baylibre.com, sboyd@codeaurora.org,
michal.simek@xilinx.com, robh+dt@kernel.org,
mark.rutland@arm.com, linux-clk@vger.kernel.org
Cc: rajanv@xilinx.com, linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, devicetree@vger.kernel.org,
Jolly Shah <jollys@xilinx.com>
Subject: [PATCH v11 00/11] drivers: Introduce firmware dnd clock river for ZynqMP core
Date: Fri, 3 Aug 2018 10:53:17 -0700 [thread overview]
Message-ID: <1533318808-10781-1-git-send-email-jollys@xilinx.com> (raw)
This patchset is adding communication layer with firmware and clock driver who uses
those APIs to communicate with PMU.
Firmware driver provides an interface to firmware APIs.Interface APIs can be used by any driver to communicate to
PMUFW(Platform Management Unit). All requests go through ATF.
This patchset adds CCF compliant clock driver for ZynqMP.Clock driver queries supported clock information from
firmware and regiters pll and output clocks with CCF.
v11:
- Removed "Reveiwed-by:Stephen Boyd" tag from firmware binding
- Updated clock and firmware driver to use probe method instead of init
- Marked PMU payload arguments with __le32 for proper endienness code
v10:
- Incorporated code review comments from v9 patch series. Discussed below:
https://patchwork.kernel.org/patch/10478575/
https://patchwork.kernel.org/patch/10478457/
https://patchwork.kernel.org/patch/10478461/
https://patchwork.kernel.org/patch/10478463/
v9:
- Fixed minor typo comments
v8:
- Corrected typo in clk Kconfig
v7:
- Removed xilinx specific clock debugfs API support
- Added reviewed-by tags for FW and clock bindings
- Updated clock node name to clock-controller
v6:
- Broke patch series to have base FW driver and Clock driver user
- Incorporated code review comments from last FW and Clock driver patch series. Discussed below:
https://patchwork.kernel.org/patch/10230759/
https://patchwork.kernel.org/patch/10250047/
v5:
- Added ATF version check support
- Updated some functions to be static
- Minor function name corrections
v4:
- Changed clock setrate/getrate API prototype to support 64 bit rate
- Defined macros for get_node_status return values
- Moved DT node as a child of firmware
- Changed debugfs APIs to return data to debugfs buffer instead of dumping to kernel log
- Minor changes to incorporate other review comments from v3 patch series
v3:
- added some fixes to firmware-ggs.c
- updated pinmux get/set function argument names to specify function id instead of node id
- added new pinctrl query macros
- incorporated review comments from v2 patch series
v2:
- change SPDX-License-Identifier license text style
- split patch into multiple patches
- Updated copyrights
- Added ABI documentation
- incorporated logical review comments from previuos patch. Discussed below:
https://patchwork.kernel.org/patch/10150665/
Jolly Shah (1):
drivers: clk: Add ZynqMP clock driver
Rajan Vaja (10):
dt-bindings: firmware: Add bindings for ZynqMP firmware
firmware: xilinx: Add Zynqmp firmware driver
firmware: xilinx: Add zynqmp IOCTL API for device control
firmware: xilinx: Add query data API
firmware: xilinx: Add clock APIs
firmware: xilinx: Add debugfs interface
firmware: xilinx: Add debugfs for IOCTL API
firmware: xilinx: Add debugfs for query data API
dt-bindings: clock: Add bindings for ZynqMP clock driver
firmware: xilinx: Replace init call with probe method
.../firmware/xilinx/xlnx,zynqmp-firmware.txt | 82 +++
arch/arm64/Kconfig.platforms | 1 +
drivers/clk/Kconfig | 1 +
drivers/clk/Makefile | 1 +
drivers/clk/zynqmp/Kconfig | 10 +
drivers/clk/zynqmp/Makefile | 4 +
drivers/clk/zynqmp/clk-gate-zynqmp.c | 144 +++++
drivers/clk/zynqmp/clk-mux-zynqmp.c | 141 ++++
drivers/clk/zynqmp/clk-zynqmp.h | 68 ++
drivers/clk/zynqmp/clkc.c | 716 +++++++++++++++++++++
drivers/clk/zynqmp/divider.c | 217 +++++++
drivers/clk/zynqmp/pll.c | 335 ++++++++++
drivers/firmware/Kconfig | 1 +
drivers/firmware/Makefile | 1 +
drivers/firmware/xilinx/Kconfig | 23 +
drivers/firmware/xilinx/Makefile | 5 +
drivers/firmware/xilinx/zynqmp-debug.c | 249 +++++++
drivers/firmware/xilinx/zynqmp-debug.h | 22 +
drivers/firmware/xilinx/zynqmp.c | 535 +++++++++++++++
include/dt-bindings/clock/xlnx,zynqmp-clk.h | 116 ++++
include/linux/firmware/xlnx-zynqmp.h | 116 ++++
21 files changed, 2788 insertions(+)
create mode 100644 Documentation/devicetree/bindings/firmware/xilinx/xlnx,zynqmp-firmware.txt
create mode 100644 drivers/clk/zynqmp/Kconfig
create mode 100644 drivers/clk/zynqmp/Makefile
create mode 100644 drivers/clk/zynqmp/clk-gate-zynqmp.c
create mode 100644 drivers/clk/zynqmp/clk-mux-zynqmp.c
create mode 100644 drivers/clk/zynqmp/clk-zynqmp.h
create mode 100644 drivers/clk/zynqmp/clkc.c
create mode 100644 drivers/clk/zynqmp/divider.c
create mode 100644 drivers/clk/zynqmp/pll.c
create mode 100644 drivers/firmware/xilinx/Kconfig
create mode 100644 drivers/firmware/xilinx/Makefile
create mode 100644 drivers/firmware/xilinx/zynqmp-debug.c
create mode 100644 drivers/firmware/xilinx/zynqmp-debug.h
create mode 100644 drivers/firmware/xilinx/zynqmp.c
create mode 100644 include/dt-bindings/clock/xlnx,zynqmp-clk.h
create mode 100644 include/linux/firmware/xlnx-zynqmp.h
--
2.7.4
WARNING: multiple messages have this Message-ID (diff)
From: jolly.shah@xilinx.com (Jolly Shah)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v11 00/11] drivers: Introduce firmware dnd clock river for ZynqMP core
Date: Fri, 3 Aug 2018 10:53:17 -0700 [thread overview]
Message-ID: <1533318808-10781-1-git-send-email-jollys@xilinx.com> (raw)
This patchset is adding communication layer with firmware and clock driver who uses
those APIs to communicate with PMU.
Firmware driver provides an interface to firmware APIs.Interface APIs can be used by any driver to communicate to
PMUFW(Platform Management Unit). All requests go through ATF.
This patchset adds CCF compliant clock driver for ZynqMP.Clock driver queries supported clock information from
firmware and regiters pll and output clocks with CCF.
v11:
- Removed "Reveiwed-by:Stephen Boyd" tag from firmware binding
- Updated clock and firmware driver to use probe method instead of init
- Marked PMU payload arguments with __le32 for proper endienness code
v10:
- Incorporated code review comments from v9 patch series. Discussed below:
https://patchwork.kernel.org/patch/10478575/
https://patchwork.kernel.org/patch/10478457/
https://patchwork.kernel.org/patch/10478461/
https://patchwork.kernel.org/patch/10478463/
v9:
- Fixed minor typo comments
v8:
- Corrected typo in clk Kconfig
v7:
- Removed xilinx specific clock debugfs API support
- Added reviewed-by tags for FW and clock bindings
- Updated clock node name to clock-controller
v6:
- Broke patch series to have base FW driver and Clock driver user
- Incorporated code review comments from last FW and Clock driver patch series. Discussed below:
https://patchwork.kernel.org/patch/10230759/
https://patchwork.kernel.org/patch/10250047/
v5:
- Added ATF version check support
- Updated some functions to be static
- Minor function name corrections
v4:
- Changed clock setrate/getrate API prototype to support 64 bit rate
- Defined macros for get_node_status return values
- Moved DT node as a child of firmware
- Changed debugfs APIs to return data to debugfs buffer instead of dumping to kernel log
- Minor changes to incorporate other review comments from v3 patch series
v3:
- added some fixes to firmware-ggs.c
- updated pinmux get/set function argument names to specify function id instead of node id
- added new pinctrl query macros
- incorporated review comments from v2 patch series
v2:
- change SPDX-License-Identifier license text style
- split patch into multiple patches
- Updated copyrights
- Added ABI documentation
- incorporated logical review comments from previuos patch. Discussed below:
https://patchwork.kernel.org/patch/10150665/
Jolly Shah (1):
drivers: clk: Add ZynqMP clock driver
Rajan Vaja (10):
dt-bindings: firmware: Add bindings for ZynqMP firmware
firmware: xilinx: Add Zynqmp firmware driver
firmware: xilinx: Add zynqmp IOCTL API for device control
firmware: xilinx: Add query data API
firmware: xilinx: Add clock APIs
firmware: xilinx: Add debugfs interface
firmware: xilinx: Add debugfs for IOCTL API
firmware: xilinx: Add debugfs for query data API
dt-bindings: clock: Add bindings for ZynqMP clock driver
firmware: xilinx: Replace init call with probe method
.../firmware/xilinx/xlnx,zynqmp-firmware.txt | 82 +++
arch/arm64/Kconfig.platforms | 1 +
drivers/clk/Kconfig | 1 +
drivers/clk/Makefile | 1 +
drivers/clk/zynqmp/Kconfig | 10 +
drivers/clk/zynqmp/Makefile | 4 +
drivers/clk/zynqmp/clk-gate-zynqmp.c | 144 +++++
drivers/clk/zynqmp/clk-mux-zynqmp.c | 141 ++++
drivers/clk/zynqmp/clk-zynqmp.h | 68 ++
drivers/clk/zynqmp/clkc.c | 716 +++++++++++++++++++++
drivers/clk/zynqmp/divider.c | 217 +++++++
drivers/clk/zynqmp/pll.c | 335 ++++++++++
drivers/firmware/Kconfig | 1 +
drivers/firmware/Makefile | 1 +
drivers/firmware/xilinx/Kconfig | 23 +
drivers/firmware/xilinx/Makefile | 5 +
drivers/firmware/xilinx/zynqmp-debug.c | 249 +++++++
drivers/firmware/xilinx/zynqmp-debug.h | 22 +
drivers/firmware/xilinx/zynqmp.c | 535 +++++++++++++++
include/dt-bindings/clock/xlnx,zynqmp-clk.h | 116 ++++
include/linux/firmware/xlnx-zynqmp.h | 116 ++++
21 files changed, 2788 insertions(+)
create mode 100644 Documentation/devicetree/bindings/firmware/xilinx/xlnx,zynqmp-firmware.txt
create mode 100644 drivers/clk/zynqmp/Kconfig
create mode 100644 drivers/clk/zynqmp/Makefile
create mode 100644 drivers/clk/zynqmp/clk-gate-zynqmp.c
create mode 100644 drivers/clk/zynqmp/clk-mux-zynqmp.c
create mode 100644 drivers/clk/zynqmp/clk-zynqmp.h
create mode 100644 drivers/clk/zynqmp/clkc.c
create mode 100644 drivers/clk/zynqmp/divider.c
create mode 100644 drivers/clk/zynqmp/pll.c
create mode 100644 drivers/firmware/xilinx/Kconfig
create mode 100644 drivers/firmware/xilinx/Makefile
create mode 100644 drivers/firmware/xilinx/zynqmp-debug.c
create mode 100644 drivers/firmware/xilinx/zynqmp-debug.h
create mode 100644 drivers/firmware/xilinx/zynqmp.c
create mode 100644 include/dt-bindings/clock/xlnx,zynqmp-clk.h
create mode 100644 include/linux/firmware/xlnx-zynqmp.h
--
2.7.4
next reply other threads:[~2018-08-03 17:56 UTC|newest]
Thread overview: 81+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-08-03 17:53 Jolly Shah [this message]
2018-08-03 17:53 ` [PATCH v11 00/11] drivers: Introduce firmware dnd clock river for ZynqMP core Jolly Shah
2018-08-03 17:53 ` Jolly Shah
2018-08-03 17:53 ` [PATCH v11 01/11] dt-bindings: firmware: Add bindings for ZynqMP firmware Jolly Shah
2018-08-03 17:53 ` Jolly Shah
2018-08-03 17:53 ` Jolly Shah
2018-08-03 17:53 ` [PATCH v11 02/11] firmware: xilinx: Add Zynqmp firmware driver Jolly Shah
2018-08-03 17:53 ` Jolly Shah
2018-08-03 17:53 ` Jolly Shah
2018-08-03 17:53 ` [PATCH v11 03/11] firmware: xilinx: Add zynqmp IOCTL API for device control Jolly Shah
2018-08-03 17:53 ` Jolly Shah
2018-08-03 17:53 ` Jolly Shah
2018-09-09 1:18 ` Olof Johansson
2018-09-09 1:18 ` Olof Johansson
2018-09-09 19:20 ` Moritz Fischer
2018-09-09 19:20 ` Moritz Fischer
2018-09-10 12:35 ` Michal Simek
2018-09-10 12:35 ` Michal Simek
2018-09-10 12:35 ` Michal Simek
2018-09-10 8:43 ` Sudeep Holla
2018-09-10 8:43 ` Sudeep Holla
2018-09-10 12:34 ` Michal Simek
2018-09-10 12:34 ` Michal Simek
2018-09-10 12:34 ` Michal Simek
2018-09-10 19:17 ` Jolly Shah
2018-09-10 19:17 ` Jolly Shah
2018-09-10 19:17 ` Jolly Shah
2018-09-10 19:17 ` Jolly Shah
2018-09-11 10:02 ` Sudeep Holla
2018-09-11 10:02 ` Sudeep Holla
2018-09-11 10:02 ` Sudeep Holla
2018-09-11 15:03 ` Olof Johansson
2018-09-11 15:03 ` Olof Johansson
2018-09-11 15:03 ` Olof Johansson
2018-09-11 15:03 ` Olof Johansson
2018-09-11 19:20 ` Jolly Shah
2018-09-11 19:20 ` Jolly Shah
2018-09-11 19:20 ` Jolly Shah
2018-09-11 19:20 ` Jolly Shah
2018-09-23 13:10 ` Olof Johansson
2018-09-23 13:10 ` Olof Johansson
2018-09-23 13:10 ` Olof Johansson
2018-09-23 13:10 ` Olof Johansson
2018-09-24 18:26 ` Jolly Shah
2018-09-24 18:26 ` Jolly Shah
2018-09-24 18:26 ` Jolly Shah
2018-09-24 18:26 ` Jolly Shah
2018-08-03 17:53 ` [PATCH v11 04/11] firmware: xilinx: Add query data API Jolly Shah
2018-08-03 17:53 ` Jolly Shah
2018-08-03 17:53 ` Jolly Shah
2018-08-03 17:53 ` [PATCH v11 05/11] firmware: xilinx: Add clock APIs Jolly Shah
2018-08-03 17:53 ` Jolly Shah
2018-08-03 17:53 ` Jolly Shah
2018-08-03 17:53 ` [PATCH v11 06/11] firmware: xilinx: Add debugfs interface Jolly Shah
2018-08-03 17:53 ` Jolly Shah
2018-08-03 17:53 ` Jolly Shah
2018-08-03 17:53 ` [PATCH v11 07/11] firmware: xilinx: Add debugfs for IOCTL API Jolly Shah
2018-08-03 17:53 ` Jolly Shah
2018-08-03 17:53 ` Jolly Shah
2018-08-03 17:53 ` [PATCH v11 08/11] firmware: xilinx: Add debugfs for query data API Jolly Shah
2018-08-03 17:53 ` Jolly Shah
2018-08-03 17:53 ` Jolly Shah
2018-09-09 1:15 ` Olof Johansson
2018-09-09 1:15 ` Olof Johansson
2018-09-10 19:19 ` Jolly Shah
2018-09-10 19:19 ` Jolly Shah
2018-09-10 19:19 ` Jolly Shah
2018-09-10 19:19 ` Jolly Shah
2018-08-03 17:53 ` [PATCH v11 09/11] dt-bindings: clock: Add bindings for ZynqMP clock driver Jolly Shah
2018-08-03 17:53 ` Jolly Shah
2018-08-03 17:53 ` Jolly Shah
2018-08-03 17:53 ` [PATCH v11 10/11] drivers: clk: Add " Jolly Shah
2018-08-03 17:53 ` Jolly Shah
2018-08-03 17:53 ` Jolly Shah
2018-08-03 17:53 ` [PATCH v11 11/11] firmware: xilinx: Replace init call with probe method Jolly Shah
2018-08-03 17:53 ` Jolly Shah
2018-08-03 17:53 ` Jolly Shah
2018-08-24 22:04 ` [PATCH v11 00/11] drivers: Introduce firmware dnd clock river for ZynqMP core Jolly Shah
2018-08-24 22:04 ` Jolly Shah
2018-08-24 22:04 ` Jolly Shah
2018-08-24 22:04 ` Jolly Shah
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1533318808-10781-1-git-send-email-jollys@xilinx.com \
--to=jolly.shah@xilinx.com \
--cc=ard.biesheuvel@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=dmitry.torokhov@gmail.com \
--cc=gregkh@linuxfoundation.org \
--cc=hkallweit1@gmail.com \
--cc=jollys@xilinx.com \
--cc=keescook@chromium.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=matt@codeblueprint.co.uk \
--cc=michal.simek@xilinx.com \
--cc=mingo@kernel.org \
--cc=mturquette@baylibre.com \
--cc=rajanv@xilinx.com \
--cc=robh+dt@kernel.org \
--cc=sboyd@codeaurora.org \
--cc=sudeep.holla@arm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.