From: <min.guo@mediatek.com>
To: Bin Liu <b-liu@ti.com>, Rob Herring <robh+dt@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Mark Rutland <mark.rutland@arm.com>,
Matthias Brugger <matthias.bgg@gmail.com>,
Alan Stern <stern@rowland.harvard.edu>,
<chunfeng.yun@mediatek.com>, <linux-usb@vger.kernel.org>,
<devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>,
<linux-mediatek@lists.infradead.org>,
Min Guo <min.guo@mediatek.com>
Subject: [PATCH 0/4] Add MediaTek MUSB Controller Driver
Date: Thu, 27 Dec 2018 15:34:22 +0800 [thread overview]
Message-ID: <1545896066-897-1-git-send-email-min.guo@mediatek.com> (raw)
From: Min Guo <min.guo@mediatek.com>
These patches introduce the MediaTek MUSB controller driver.
The driver can be configured as Dual-Role Device (DRD),
Peripheral Only and Host Only modes. This has beed tested on
MT2701 with a variety of devices in host mode and with the
f_mass gadget driver in peripheral mode, plugging otg cables
in/out a lot of times in all possible imaginable plug orders
Min Guo (4):
dt-bindings: usb: musb: Add support for MediaTek musb controller
arm: dts: mt2701: Add usb2 device nodes
usb: musb: Move musbhsdma macro definition to musb_dma.h
usb: musb: Add support for MediaTek musb controller
.../devicetree/bindings/usb/mediatek,musb.txt | 49 ++
arch/arm/boot/dts/mt2701-evb.dts | 21 +
arch/arm/boot/dts/mt2701.dtsi | 34 ++
drivers/usb/musb/Kconfig | 8 +-
drivers/usb/musb/Makefile | 1 +
drivers/usb/musb/mediatek.c | 562 +++++++++++++++++++++
drivers/usb/musb/musb_core.c | 10 +
drivers/usb/musb/musb_core.h | 1 +
drivers/usb/musb/musb_dma.h | 7 +
drivers/usb/musb/musb_host.c | 79 ++-
drivers/usb/musb/musb_regs.h | 6 +
drivers/usb/musb/musbhsdma.c | 41 +-
12 files changed, 782 insertions(+), 37 deletions(-)
create mode 100644 Documentation/devicetree/bindings/usb/mediatek,musb.txt
create mode 100644 drivers/usb/musb/mediatek.c
--
1.9.1
WARNING: multiple messages have this Message-ID (diff)
From: <min.guo@mediatek.com>
To: Bin Liu <b-liu@ti.com>, Rob Herring <robh+dt@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Mark Rutland <mark.rutland@arm.com>,
Matthias Brugger <matthias.bgg@gmail.com>,
Alan Stern <stern@rowland.harvard.edu>,
chunfeng.yun@mediatek.com, linux-usb@vger.kernel.org,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-mediatek@lists.infradead.org,
Min Guo <min.guo@mediatek.com>
Subject: [PATCH 0/4] Add MediaTek MUSB Controller Driver
Date: Thu, 27 Dec 2018 15:34:22 +0800 [thread overview]
Message-ID: <1545896066-897-1-git-send-email-min.guo@mediatek.com> (raw)
From: Min Guo <min.guo@mediatek.com>
These patches introduce the MediaTek MUSB controller driver.
The driver can be configured as Dual-Role Device (DRD),
Peripheral Only and Host Only modes. This has beed tested on
MT2701 with a variety of devices in host mode and with the
f_mass gadget driver in peripheral mode, plugging otg cables
in/out a lot of times in all possible imaginable plug orders
Min Guo (4):
dt-bindings: usb: musb: Add support for MediaTek musb controller
arm: dts: mt2701: Add usb2 device nodes
usb: musb: Move musbhsdma macro definition to musb_dma.h
usb: musb: Add support for MediaTek musb controller
.../devicetree/bindings/usb/mediatek,musb.txt | 49 ++
arch/arm/boot/dts/mt2701-evb.dts | 21 +
arch/arm/boot/dts/mt2701.dtsi | 34 ++
drivers/usb/musb/Kconfig | 8 +-
drivers/usb/musb/Makefile | 1 +
drivers/usb/musb/mediatek.c | 562 +++++++++++++++++++++
drivers/usb/musb/musb_core.c | 10 +
drivers/usb/musb/musb_core.h | 1 +
drivers/usb/musb/musb_dma.h | 7 +
drivers/usb/musb/musb_host.c | 79 ++-
drivers/usb/musb/musb_regs.h | 6 +
drivers/usb/musb/musbhsdma.c | 41 +-
12 files changed, 782 insertions(+), 37 deletions(-)
create mode 100644 Documentation/devicetree/bindings/usb/mediatek,musb.txt
create mode 100644 drivers/usb/musb/mediatek.c
--
1.9.1
WARNING: multiple messages have this Message-ID (diff)
From: <min.guo@mediatek.com>
To: Bin Liu <b-liu@ti.com>, Rob Herring <robh+dt@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>,
devicetree@vger.kernel.org,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
linux-usb@vger.kernel.org, linux-kernel@vger.kernel.org,
Matthias Brugger <matthias.bgg@gmail.com>,
Alan Stern <stern@rowland.harvard.edu>,
Min Guo <min.guo@mediatek.com>,
chunfeng.yun@mediatek.com, linux-mediatek@lists.infradead.org,
linux-arm-kernel@lists.infradead.org
Subject: [PATCH 0/4] Add MediaTek MUSB Controller Driver
Date: Thu, 27 Dec 2018 15:34:22 +0800 [thread overview]
Message-ID: <1545896066-897-1-git-send-email-min.guo@mediatek.com> (raw)
From: Min Guo <min.guo@mediatek.com>
These patches introduce the MediaTek MUSB controller driver.
The driver can be configured as Dual-Role Device (DRD),
Peripheral Only and Host Only modes. This has beed tested on
MT2701 with a variety of devices in host mode and with the
f_mass gadget driver in peripheral mode, plugging otg cables
in/out a lot of times in all possible imaginable plug orders
Min Guo (4):
dt-bindings: usb: musb: Add support for MediaTek musb controller
arm: dts: mt2701: Add usb2 device nodes
usb: musb: Move musbhsdma macro definition to musb_dma.h
usb: musb: Add support for MediaTek musb controller
.../devicetree/bindings/usb/mediatek,musb.txt | 49 ++
arch/arm/boot/dts/mt2701-evb.dts | 21 +
arch/arm/boot/dts/mt2701.dtsi | 34 ++
drivers/usb/musb/Kconfig | 8 +-
drivers/usb/musb/Makefile | 1 +
drivers/usb/musb/mediatek.c | 562 +++++++++++++++++++++
drivers/usb/musb/musb_core.c | 10 +
drivers/usb/musb/musb_core.h | 1 +
drivers/usb/musb/musb_dma.h | 7 +
drivers/usb/musb/musb_host.c | 79 ++-
drivers/usb/musb/musb_regs.h | 6 +
drivers/usb/musb/musbhsdma.c | 41 +-
12 files changed, 782 insertions(+), 37 deletions(-)
create mode 100644 Documentation/devicetree/bindings/usb/mediatek,musb.txt
create mode 100644 drivers/usb/musb/mediatek.c
--
1.9.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next reply other threads:[~2018-12-27 7:35 UTC|newest]
Thread overview: 71+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-12-27 7:34 min.guo [this message]
2018-12-27 7:34 ` [PATCH 0/4] Add MediaTek MUSB Controller Driver min.guo
2018-12-27 7:34 ` min.guo
2018-12-27 7:34 ` [PATCH 1/4] dt-bindings: usb: musb: Add support for MediaTek musb controller min.guo
2018-12-27 7:34 ` min.guo
2018-12-27 7:34 ` [1/4] " min.guo
2018-12-27 7:34 ` [PATCH 1/4] " min.guo
2019-01-03 22:14 ` Rob Herring
2019-01-03 22:14 ` Rob Herring
2019-01-03 22:14 ` [1/4] " Rob Herring
2019-01-04 3:00 ` [PATCH 1/4] " Min Guo
2019-01-04 3:00 ` Min Guo
2019-01-04 3:00 ` [1/4] " min.guo
2019-01-04 3:00 ` [PATCH 1/4] " Min Guo
2019-01-04 16:10 ` Rob Herring
2019-01-04 16:10 ` Rob Herring
2019-01-04 16:10 ` [1/4] " Rob Herring
2019-01-04 16:10 ` [PATCH 1/4] " Rob Herring
2019-01-07 7:31 ` Min Guo
2019-01-07 7:31 ` Min Guo
2019-01-07 7:31 ` [1/4] " min.guo
2019-01-07 7:31 ` [PATCH 1/4] " Min Guo
2019-01-08 14:05 ` Rob Herring
2019-01-07 20:40 ` Bin Liu
2019-01-07 20:40 ` Bin Liu
2019-01-07 20:40 ` [1/4] " Bin Liu
2019-01-07 20:40 ` [PATCH 1/4] " Bin Liu
2019-01-08 1:30 ` Min Guo
2019-01-08 1:30 ` Min Guo
2019-01-08 1:30 ` [1/4] " min.guo
2019-01-08 1:30 ` [PATCH 1/4] " Min Guo
2018-12-27 7:34 ` [PATCH 2/4] arm: dts: mt2701: Add usb2 device nodes min.guo
2018-12-27 7:34 ` min.guo
2018-12-27 7:34 ` [2/4] " min.guo
2018-12-27 7:34 ` [PATCH 2/4] " min.guo
2018-12-27 7:34 ` [PATCH 3/4] usb: musb: Move musbhsdma macro definition to musb_dma.h min.guo
2018-12-27 7:34 ` min.guo
2018-12-27 7:34 ` [3/4] " min.guo
2018-12-27 7:34 ` [PATCH 3/4] " min.guo
2018-12-27 7:34 ` [PATCH 4/4] usb: musb: Add support for MediaTek musb controller min.guo
2018-12-27 7:34 ` min.guo
2018-12-27 7:34 ` [4/4] " min.guo
2018-12-27 7:34 ` [PATCH 4/4] " min.guo
2019-01-08 15:44 ` Bin Liu
2019-01-08 15:44 ` Bin Liu
2019-01-08 15:44 ` [4/4] " Bin Liu
2019-01-08 15:44 ` [PATCH 4/4] " Bin Liu
2019-01-09 12:31 ` Min Guo
2019-01-09 12:31 ` Min Guo
2019-01-09 12:31 ` [4/4] " min.guo
2019-01-09 12:31 ` [PATCH 4/4] " Min Guo
2019-01-09 14:01 ` Bin Liu
2019-01-09 14:01 ` Bin Liu
2019-01-09 14:01 ` [4/4] " Bin Liu
2019-01-09 14:01 ` [PATCH 4/4] " Bin Liu
2019-01-10 7:24 ` Min Guo
2019-01-10 7:24 ` Min Guo
2019-01-10 7:24 ` [4/4] " min.guo
2019-01-10 7:24 ` [PATCH 4/4] " Min Guo
2019-01-10 14:18 ` Bin Liu
2019-01-10 14:18 ` Bin Liu
2019-01-10 14:18 ` [4/4] " Bin Liu
2019-01-10 14:18 ` [PATCH 4/4] " Bin Liu
2019-01-11 1:18 ` Min Guo
2019-01-11 1:18 ` Min Guo
2019-01-11 1:18 ` [4/4] " min.guo
2019-01-11 1:18 ` [PATCH 4/4] " Min Guo
2019-01-11 5:24 ` Min Guo
2019-01-11 5:24 ` Min Guo
2019-01-11 5:24 ` [4/4] " min.guo
2019-01-11 5:24 ` [PATCH 4/4] " Min Guo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1545896066-897-1-git-send-email-min.guo@mediatek.com \
--to=min.guo@mediatek.com \
--cc=b-liu@ti.com \
--cc=chunfeng.yun@mediatek.com \
--cc=devicetree@vger.kernel.org \
--cc=gregkh@linuxfoundation.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mediatek@lists.infradead.org \
--cc=linux-usb@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=matthias.bgg@gmail.com \
--cc=robh+dt@kernel.org \
--cc=stern@rowland.harvard.edu \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.