From: Loys Ollivier <lollivier@baylibre.com>
To: devicetree@vger.kernel.org, Johan Hovold <johan@kernel.org>
Cc: Loys Ollivier <lollivier@baylibre.com>,
Rob Herring <robh+dt@kernel.org>,
Mark Rutland <mark.rutland@arm.com>,
linux-kernel@vger.kernel.org, Kevin Hilman <khilman@baylibre.com>,
linux-amlogic@lists.infradead.org
Subject: [PATCH 2/4] dt-bindings: gnss: add gtop binding
Date: Fri, 28 Dec 2018 11:50:33 +0100 [thread overview]
Message-ID: <1545994235-8309-3-git-send-email-lollivier@baylibre.com> (raw)
In-Reply-To: <1545994235-8309-1-git-send-email-lollivier@baylibre.com>
Add binding for GlobalTop GNSS receivers.
Signed-off-by: Loys Ollivier <lollivier@baylibre.com>
---
Documentation/devicetree/bindings/gnss/gtop.txt | 33 +++++++++++++++++++++++++
1 file changed, 33 insertions(+)
create mode 100644 Documentation/devicetree/bindings/gnss/gtop.txt
diff --git a/Documentation/devicetree/bindings/gnss/gtop.txt b/Documentation/devicetree/bindings/gnss/gtop.txt
new file mode 100644
index 000000000000..24c86703aa46
--- /dev/null
+++ b/Documentation/devicetree/bindings/gnss/gtop.txt
@@ -0,0 +1,33 @@
+GlobalTop GNSS Receiver DT binding
+
+The GlobalTop GNSS receivers uses UART interfaces.
+
+Please see Documentation/devicetree/bindings/gnss/gnss.txt for generic
+properties.
+
+Required properties:
+
+- compatible : Must be
+
+ "globaltop,pa6h"
+
+- vcc-supply : Main voltage regulator
+
+Optional properties:
+
+- timepulse-gpios : Time pulse GPIO
+- v-bckp-supply : Backup voltage regulator
+
+Example:
+
+&uart_A {
+ status = "okay";
+ pinctrl-0 = <&uart_a_pins>;
+ pinctrl-names = "default";
+
+ gnss {
+ compatible = "globaltop,pa6h";
+ vcc-supply = <&vcc_3v3>;
+ current-speed = <9600>;
+ };
+};
--
2.7.4
WARNING: multiple messages have this Message-ID (diff)
From: Loys Ollivier <lollivier@baylibre.com>
To: devicetree@vger.kernel.org, Johan Hovold <johan@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>,
Kevin Hilman <khilman@baylibre.com>,
Loys Ollivier <lollivier@baylibre.com>,
linux-kernel@vger.kernel.org, Rob Herring <robh+dt@kernel.org>,
linux-amlogic@lists.infradead.org
Subject: [PATCH 2/4] dt-bindings: gnss: add gtop binding
Date: Fri, 28 Dec 2018 11:50:33 +0100 [thread overview]
Message-ID: <1545994235-8309-3-git-send-email-lollivier@baylibre.com> (raw)
In-Reply-To: <1545994235-8309-1-git-send-email-lollivier@baylibre.com>
Add binding for GlobalTop GNSS receivers.
Signed-off-by: Loys Ollivier <lollivier@baylibre.com>
---
Documentation/devicetree/bindings/gnss/gtop.txt | 33 +++++++++++++++++++++++++
1 file changed, 33 insertions(+)
create mode 100644 Documentation/devicetree/bindings/gnss/gtop.txt
diff --git a/Documentation/devicetree/bindings/gnss/gtop.txt b/Documentation/devicetree/bindings/gnss/gtop.txt
new file mode 100644
index 000000000000..24c86703aa46
--- /dev/null
+++ b/Documentation/devicetree/bindings/gnss/gtop.txt
@@ -0,0 +1,33 @@
+GlobalTop GNSS Receiver DT binding
+
+The GlobalTop GNSS receivers uses UART interfaces.
+
+Please see Documentation/devicetree/bindings/gnss/gnss.txt for generic
+properties.
+
+Required properties:
+
+- compatible : Must be
+
+ "globaltop,pa6h"
+
+- vcc-supply : Main voltage regulator
+
+Optional properties:
+
+- timepulse-gpios : Time pulse GPIO
+- v-bckp-supply : Backup voltage regulator
+
+Example:
+
+&uart_A {
+ status = "okay";
+ pinctrl-0 = <&uart_a_pins>;
+ pinctrl-names = "default";
+
+ gnss {
+ compatible = "globaltop,pa6h";
+ vcc-supply = <&vcc_3v3>;
+ current-speed = <9600>;
+ };
+};
--
2.7.4
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
next prev parent reply other threads:[~2018-12-28 10:51 UTC|newest]
Thread overview: 27+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-12-28 10:50 [PATCH 0/4] Add driver for globaltop GNSS receivers Loys Ollivier
2018-12-28 10:50 ` Loys Ollivier
2018-12-28 10:50 ` [PATCH 1/4] dt-bindings: Add vendor prefix for "GlobalTop Technology, Inc." Loys Ollivier
2018-12-28 10:50 ` Loys Ollivier
2019-01-11 14:40 ` Rob Herring
2019-01-11 14:40 ` Rob Herring
2018-12-28 10:50 ` Loys Ollivier [this message]
2018-12-28 10:50 ` [PATCH 2/4] dt-bindings: gnss: add gtop binding Loys Ollivier
2019-01-11 14:43 ` Rob Herring
2019-01-11 14:43 ` Rob Herring
2018-12-28 10:50 ` [PATCH 3/4] gnss: add gtop receiver type support Loys Ollivier
2018-12-28 10:50 ` Loys Ollivier
2018-12-28 10:50 ` [PATCH 4/4] gnss: add driver for globaltop receivers Loys Ollivier
2018-12-28 10:50 ` Loys Ollivier
2019-01-03 16:04 ` [PATCH 0/4] Add driver for globaltop GNSS receivers Loys Ollivier
2019-01-03 16:04 ` Loys Ollivier
2019-01-04 9:19 ` Johan Hovold
2019-01-04 9:19 ` Johan Hovold
2019-01-07 16:21 ` Loys Ollivier
2019-01-07 16:21 ` Loys Ollivier
2019-01-07 16:37 ` Johan Hovold
2019-01-07 16:37 ` Johan Hovold
2019-01-04 17:51 ` Rob Herring
2019-01-04 17:51 ` Rob Herring
2019-01-15 10:00 ` Loys Ollivier
2019-01-15 10:00 ` Loys Ollivier
2019-01-15 10:00 ` Loys Ollivier
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1545994235-8309-3-git-send-email-lollivier@baylibre.com \
--to=lollivier@baylibre.com \
--cc=devicetree@vger.kernel.org \
--cc=johan@kernel.org \
--cc=khilman@baylibre.com \
--cc=linux-amlogic@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.