From: Tamizh chelvam <tamizhr@codeaurora.org> To: johannes@sipsolutions.net, ath10k@lists.infradead.org Cc: linux-wireless@vger.kernel.org, Tamizh chelvam <tamizhr@codeaurora.org> Subject: [PATCHv6 0/9] cfg80211/mac80211: Add support for TID specific configuration Date: Tue, 18 Jun 2019 10:57:03 +0530 [thread overview] Message-ID: <1560835632-17405-1-git-send-email-tamizhr@codeaurora.org> (raw) Add infrastructure to support per TID configurations like noack policy, retry count, AMPDU control(disable/enable), RTSCTS control(enable/disable) and TX rate mask configurations. This will be useful for the driver which can supports data TID specific configuration rather than phy level configurations. Here NL80211_CMD_SET_TID_CONFIG added to support this operation by accepting TID configuration. This command can accept STA mac addreess to make the configuration station specific rather than applying to all the connected stations to the netdev. And this nested command configuration can accept multiple number of data TID specific configuration in a single command, enum ieee80211_tid_conf_mask used to notify the driver that which configuration got modified for the TID. Tamizh chelvam (9): nl80211: New netlink command for TID specific configuration nl80211: Add new netlink attribute for TID speicific retry count nl80211: Add netlink attribute for AMPDU aggregation enable/disable nl80211: Add netlink attribute to enable/disable RTS_CTS nl80211: Add netlink attribute to configure TID specific tx rate mac80211: Add api to support configuring TID specific configuration ath10k: Add wmi command support for station specific TID config ath10k: Add new api to support TID specific configuration ath10k: Add extended TID configuration support v6: * Addressed Johannes comments. v5: * Fixed possible memleak of 'tid_conf' in nl80211_set_tid_config. v4: * Fixed kbuild warnings. v3: * Modified "nl80211: Add netlink attribute to configure TID specific tx rate" patch to accept multiple TX rate configuration at a time. * Modified noack and ampdu variable data type to int in "mac80211: Add api to support configuring TID specific configuration" patch to store default configuration. * Modified "ath10k: Add new api to support TID specific configuration" patch to handle default values for noack and ampdu. And added sta pointer sanity check in ath10k_mac_tid_bitrate_config function. * Fixed "ath10k: Add extended TID configuration support" wmi command parameters assigned part. v2: * Added support to accept multiple TID configuration * Added support to configure TX rate and RTSCTS control drivers/net/wireless/ath/ath10k/core.c | 4 + drivers/net/wireless/ath/ath10k/core.h | 6 + drivers/net/wireless/ath/ath10k/mac.c | 681 +++++++++++++++++++++++++---- drivers/net/wireless/ath/ath10k/wmi-ops.h | 19 + drivers/net/wireless/ath/ath10k/wmi.c | 35 ++ drivers/net/wireless/ath/ath10k/wmi.h | 72 +++ include/net/cfg80211.h | 57 +++ include/net/mac80211.h | 38 ++ include/uapi/linux/nl80211.h | 188 ++++++++ net/mac80211/cfg.c | 28 ++ net/mac80211/driver-ops.h | 15 + net/wireless/nl80211.c | 284 +++++++++++- net/wireless/rdev-ops.h | 12 + net/wireless/trace.h | 17 + 14 files changed, 1371 insertions(+), 85 deletions(-) -- 1.7.9.5
WARNING: multiple messages have this Message-ID (diff)
From: Tamizh chelvam <tamizhr@codeaurora.org> To: johannes@sipsolutions.net, ath10k@lists.infradead.org Cc: linux-wireless@vger.kernel.org, Tamizh chelvam <tamizhr@codeaurora.org> Subject: [PATCHv6 0/9] cfg80211/mac80211: Add support for TID specific configuration Date: Tue, 18 Jun 2019 10:57:03 +0530 [thread overview] Message-ID: <1560835632-17405-1-git-send-email-tamizhr@codeaurora.org> (raw) Add infrastructure to support per TID configurations like noack policy, retry count, AMPDU control(disable/enable), RTSCTS control(enable/disable) and TX rate mask configurations. This will be useful for the driver which can supports data TID specific configuration rather than phy level configurations. Here NL80211_CMD_SET_TID_CONFIG added to support this operation by accepting TID configuration. This command can accept STA mac addreess to make the configuration station specific rather than applying to all the connected stations to the netdev. And this nested command configuration can accept multiple number of data TID specific configuration in a single command, enum ieee80211_tid_conf_mask used to notify the driver that which configuration got modified for the TID. Tamizh chelvam (9): nl80211: New netlink command for TID specific configuration nl80211: Add new netlink attribute for TID speicific retry count nl80211: Add netlink attribute for AMPDU aggregation enable/disable nl80211: Add netlink attribute to enable/disable RTS_CTS nl80211: Add netlink attribute to configure TID specific tx rate mac80211: Add api to support configuring TID specific configuration ath10k: Add wmi command support for station specific TID config ath10k: Add new api to support TID specific configuration ath10k: Add extended TID configuration support v6: * Addressed Johannes comments. v5: * Fixed possible memleak of 'tid_conf' in nl80211_set_tid_config. v4: * Fixed kbuild warnings. v3: * Modified "nl80211: Add netlink attribute to configure TID specific tx rate" patch to accept multiple TX rate configuration at a time. * Modified noack and ampdu variable data type to int in "mac80211: Add api to support configuring TID specific configuration" patch to store default configuration. * Modified "ath10k: Add new api to support TID specific configuration" patch to handle default values for noack and ampdu. And added sta pointer sanity check in ath10k_mac_tid_bitrate_config function. * Fixed "ath10k: Add extended TID configuration support" wmi command parameters assigned part. v2: * Added support to accept multiple TID configuration * Added support to configure TX rate and RTSCTS control drivers/net/wireless/ath/ath10k/core.c | 4 + drivers/net/wireless/ath/ath10k/core.h | 6 + drivers/net/wireless/ath/ath10k/mac.c | 681 +++++++++++++++++++++++++---- drivers/net/wireless/ath/ath10k/wmi-ops.h | 19 + drivers/net/wireless/ath/ath10k/wmi.c | 35 ++ drivers/net/wireless/ath/ath10k/wmi.h | 72 +++ include/net/cfg80211.h | 57 +++ include/net/mac80211.h | 38 ++ include/uapi/linux/nl80211.h | 188 ++++++++ net/mac80211/cfg.c | 28 ++ net/mac80211/driver-ops.h | 15 + net/wireless/nl80211.c | 284 +++++++++++- net/wireless/rdev-ops.h | 12 + net/wireless/trace.h | 17 + 14 files changed, 1371 insertions(+), 85 deletions(-) -- 1.7.9.5 _______________________________________________ ath10k mailing list ath10k@lists.infradead.org http://lists.infradead.org/mailman/listinfo/ath10k
next reply other threads:[~2019-06-18 6:47 UTC|newest] Thread overview: 54+ messages / expand[flat|nested] mbox.gz Atom feed top 2019-06-18 5:27 Tamizh chelvam [this message] 2019-06-18 5:27 ` [PATCHv6 0/9] cfg80211/mac80211: Add support for TID specific configuration Tamizh chelvam 2019-06-18 5:27 ` [PATCHv6 1/9] nl80211: New netlink command " Tamizh chelvam 2019-06-18 5:27 ` Tamizh chelvam 2019-07-11 12:51 ` Sergey Matyukevich 2019-07-11 12:51 ` Sergey Matyukevich 2019-07-31 10:04 ` Tamizh chelvam 2019-07-31 10:04 ` Tamizh chelvam 2019-07-11 13:13 ` Sergey Matyukevich 2019-07-11 13:13 ` Sergey Matyukevich 2019-07-31 9:19 ` Johannes Berg 2019-07-31 9:19 ` Johannes Berg 2019-07-31 10:28 ` Tamizh chelvam 2019-07-31 10:28 ` Tamizh chelvam 2019-07-31 9:25 ` Johannes Berg 2019-07-31 9:25 ` Johannes Berg 2019-08-10 12:40 ` Tamizh chelvam 2019-08-10 12:40 ` Tamizh chelvam 2019-08-21 7:42 ` Johannes Berg 2019-08-21 7:42 ` Johannes Berg 2019-06-18 5:27 ` [PATCHv6 2/9] nl80211: Add new netlink attribute for TID speicific retry count Tamizh chelvam 2019-06-18 5:27 ` Tamizh chelvam 2019-07-31 9:24 ` Johannes Berg 2019-07-31 9:24 ` Johannes Berg 2019-08-10 12:06 ` Tamizh chelvam 2019-08-10 12:06 ` Tamizh chelvam 2019-08-21 7:41 ` Johannes Berg 2019-08-21 7:41 ` Johannes Berg 2019-06-18 5:27 ` [PATCHv6 3/9] nl80211: Add netlink attribute for AMPDU aggregation enable/disable Tamizh chelvam 2019-06-18 5:27 ` Tamizh chelvam 2019-07-31 9:28 ` Johannes Berg 2019-07-31 9:28 ` Johannes Berg 2019-08-10 12:41 ` Tamizh chelvam 2019-08-10 12:41 ` Tamizh chelvam 2019-06-18 5:27 ` [PATCHv6 4/9] nl80211: Add netlink attribute to enable/disable RTS_CTS Tamizh chelvam 2019-06-18 5:27 ` Tamizh chelvam 2019-06-18 5:27 ` [PATCHv6 5/9] nl80211: Add netlink attribute to configure TID specific tx rate Tamizh chelvam 2019-06-18 5:27 ` Tamizh chelvam 2019-07-11 12:54 ` Sergey Matyukevich 2019-07-11 12:54 ` Sergey Matyukevich 2019-07-31 10:08 ` Tamizh chelvam 2019-07-31 10:08 ` Tamizh chelvam 2019-07-31 9:32 ` Johannes Berg 2019-07-31 9:32 ` Johannes Berg 2019-06-18 5:27 ` [PATCHv6 6/9] mac80211: Add api to support configuring TID specific configuration Tamizh chelvam 2019-06-18 5:27 ` Tamizh chelvam 2019-07-31 9:34 ` Johannes Berg 2019-07-31 9:34 ` Johannes Berg 2019-06-18 5:27 ` [PATCHv6 7/9] ath10k: Add wmi command support for station specific TID config Tamizh chelvam 2019-06-18 5:27 ` Tamizh chelvam 2019-06-18 5:27 ` [PATCHv6 8/9] ath10k: Add new api to support TID specific configuration Tamizh chelvam 2019-06-18 5:27 ` Tamizh chelvam 2019-06-18 5:27 ` [PATCHv6 9/9] ath10k: Add extended TID configuration support Tamizh chelvam 2019-06-18 5:27 ` Tamizh chelvam
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1560835632-17405-1-git-send-email-tamizhr@codeaurora.org \ --to=tamizhr@codeaurora.org \ --cc=ath10k@lists.infradead.org \ --cc=johannes@sipsolutions.net \ --cc=linux-wireless@vger.kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.