From: Stefan Riedmueller <s.riedmueller@phytec.de>
To: shawnguo@kernel.org, s.hauer@pengutronix.de, robh+dt@kernel.org,
mark.rutland@arm.com
Cc: devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org, martyn.welch@collabora.com,
kernel@pengutronix.de, festevam@gmail.com, linux-imx@nxp.com
Subject: [PATCH 00/10] Add further support for PHYTEC phyBOARD-Segin
Date: Tue, 9 Jul 2019 09:19:17 +0200 [thread overview]
Message-ID: <1562656767-273566-1-git-send-email-s.riedmueller@phytec.de> (raw)
This patchstack adjusts the already existing naming for the PHYTEC
phyBOARD-Segin to the PHYTEC naming scheme that is already used with the
phyCORE-i.MX 6 and the phyBOARD-Mira.
Furthermore it introduces some small fixes and adds support for the PHYTEC
phyCORE-i.MX 6ULL which also comes with the phyBORAD-Segin. It comes in a
full featured option with either NAND flash or eMMC and a low cost option
only with NAND flash.
Stefan Riedmueller (10):
ARM: dts: imx6ul: phyboard-segin: Rename dts to PHYTEC name scheme
ARM: dts: imx6ul: segin: Add boot media to dts filename
ARM: dts: imx6ul: segin: Reduce eth drive strength
ARM: dts: imx6ul: segin: Fix LED naming for phyCORE and PEB-EVAL-01
ARM: dts: imx6ul: segin: Make FEC and ethphy configurable in dts
ARM: dts: imx6ul: segin: Only enable NAND if it is populated
ARM: dts: imx6ul: phycore: Add eMMC at usdhc2
ARM: dts: imx6ul: segin: Move ECSPI interface to board include file
ARM: dts: imx6ul: segin: Move machine include to dts files
ARM: dts: imx6ull: Add support for PHYTEC phyBOARD-Segin with i.MX
6ULL
arch/arm/boot/dts/Makefile | 5 +-
...-pcl063.dtsi => imx6ul-phytec-phycore-som.dtsi} | 51 ++++++++----
...ull.dts => imx6ul-phytec-segin-ff-rdk-nand.dts} | 42 +++++-----
...1.dtsi => imx6ul-phytec-segin-peb-eval-01.dtsi} | 16 ++--
...hyboard-segin.dtsi => imx6ul-phytec-segin.dtsi} | 31 ++++++--
arch/arm/boot/dts/imx6ull-phytec-phycore-som.dtsi | 24 ++++++
.../boot/dts/imx6ull-phytec-segin-ff-rdk-emmc.dts | 93 ++++++++++++++++++++++
.../boot/dts/imx6ull-phytec-segin-ff-rdk-nand.dts | 93 ++++++++++++++++++++++
.../boot/dts/imx6ull-phytec-segin-lc-rdk-nand.dts | 45 +++++++++++
.../boot/dts/imx6ull-phytec-segin-peb-eval-01.dtsi | 19 +++++
arch/arm/boot/dts/imx6ull-phytec-segin.dtsi | 38 +++++++++
11 files changed, 409 insertions(+), 48 deletions(-)
rename arch/arm/boot/dts/{imx6ul-phytec-pcl063.dtsi => imx6ul-phytec-phycore-som.dtsi} (72%)
rename arch/arm/boot/dts/{imx6ul-phytec-phyboard-segin-full.dts => imx6ul-phytec-segin-ff-rdk-nand.dts} (51%)
rename arch/arm/boot/dts/{imx6ul-phytec-peb-eval-01.dtsi => imx6ul-phytec-segin-peb-eval-01.dtsi} (84%)
rename arch/arm/boot/dts/{imx6ul-phytec-phyboard-segin.dtsi => imx6ul-phytec-segin.dtsi} (91%)
create mode 100644 arch/arm/boot/dts/imx6ull-phytec-phycore-som.dtsi
create mode 100644 arch/arm/boot/dts/imx6ull-phytec-segin-ff-rdk-emmc.dts
create mode 100644 arch/arm/boot/dts/imx6ull-phytec-segin-ff-rdk-nand.dts
create mode 100644 arch/arm/boot/dts/imx6ull-phytec-segin-lc-rdk-nand.dts
create mode 100644 arch/arm/boot/dts/imx6ull-phytec-segin-peb-eval-01.dtsi
create mode 100644 arch/arm/boot/dts/imx6ull-phytec-segin.dtsi
--
2.7.4
WARNING: multiple messages have this Message-ID (diff)
From: Stefan Riedmueller <s.riedmueller@phytec.de>
To: shawnguo@kernel.org, s.hauer@pengutronix.de, robh+dt@kernel.org,
mark.rutland@arm.com
Cc: devicetree@vger.kernel.org, martyn.welch@collabora.com,
linux-kernel@vger.kernel.org, linux-imx@nxp.com,
kernel@pengutronix.de, festevam@gmail.com,
linux-arm-kernel@lists.infradead.org
Subject: [PATCH 00/10] Add further support for PHYTEC phyBOARD-Segin
Date: Tue, 9 Jul 2019 09:19:17 +0200 [thread overview]
Message-ID: <1562656767-273566-1-git-send-email-s.riedmueller@phytec.de> (raw)
This patchstack adjusts the already existing naming for the PHYTEC
phyBOARD-Segin to the PHYTEC naming scheme that is already used with the
phyCORE-i.MX 6 and the phyBOARD-Mira.
Furthermore it introduces some small fixes and adds support for the PHYTEC
phyCORE-i.MX 6ULL which also comes with the phyBORAD-Segin. It comes in a
full featured option with either NAND flash or eMMC and a low cost option
only with NAND flash.
Stefan Riedmueller (10):
ARM: dts: imx6ul: phyboard-segin: Rename dts to PHYTEC name scheme
ARM: dts: imx6ul: segin: Add boot media to dts filename
ARM: dts: imx6ul: segin: Reduce eth drive strength
ARM: dts: imx6ul: segin: Fix LED naming for phyCORE and PEB-EVAL-01
ARM: dts: imx6ul: segin: Make FEC and ethphy configurable in dts
ARM: dts: imx6ul: segin: Only enable NAND if it is populated
ARM: dts: imx6ul: phycore: Add eMMC at usdhc2
ARM: dts: imx6ul: segin: Move ECSPI interface to board include file
ARM: dts: imx6ul: segin: Move machine include to dts files
ARM: dts: imx6ull: Add support for PHYTEC phyBOARD-Segin with i.MX
6ULL
arch/arm/boot/dts/Makefile | 5 +-
...-pcl063.dtsi => imx6ul-phytec-phycore-som.dtsi} | 51 ++++++++----
...ull.dts => imx6ul-phytec-segin-ff-rdk-nand.dts} | 42 +++++-----
...1.dtsi => imx6ul-phytec-segin-peb-eval-01.dtsi} | 16 ++--
...hyboard-segin.dtsi => imx6ul-phytec-segin.dtsi} | 31 ++++++--
arch/arm/boot/dts/imx6ull-phytec-phycore-som.dtsi | 24 ++++++
.../boot/dts/imx6ull-phytec-segin-ff-rdk-emmc.dts | 93 ++++++++++++++++++++++
.../boot/dts/imx6ull-phytec-segin-ff-rdk-nand.dts | 93 ++++++++++++++++++++++
.../boot/dts/imx6ull-phytec-segin-lc-rdk-nand.dts | 45 +++++++++++
.../boot/dts/imx6ull-phytec-segin-peb-eval-01.dtsi | 19 +++++
arch/arm/boot/dts/imx6ull-phytec-segin.dtsi | 38 +++++++++
11 files changed, 409 insertions(+), 48 deletions(-)
rename arch/arm/boot/dts/{imx6ul-phytec-pcl063.dtsi => imx6ul-phytec-phycore-som.dtsi} (72%)
rename arch/arm/boot/dts/{imx6ul-phytec-phyboard-segin-full.dts => imx6ul-phytec-segin-ff-rdk-nand.dts} (51%)
rename arch/arm/boot/dts/{imx6ul-phytec-peb-eval-01.dtsi => imx6ul-phytec-segin-peb-eval-01.dtsi} (84%)
rename arch/arm/boot/dts/{imx6ul-phytec-phyboard-segin.dtsi => imx6ul-phytec-segin.dtsi} (91%)
create mode 100644 arch/arm/boot/dts/imx6ull-phytec-phycore-som.dtsi
create mode 100644 arch/arm/boot/dts/imx6ull-phytec-segin-ff-rdk-emmc.dts
create mode 100644 arch/arm/boot/dts/imx6ull-phytec-segin-ff-rdk-nand.dts
create mode 100644 arch/arm/boot/dts/imx6ull-phytec-segin-lc-rdk-nand.dts
create mode 100644 arch/arm/boot/dts/imx6ull-phytec-segin-peb-eval-01.dtsi
create mode 100644 arch/arm/boot/dts/imx6ull-phytec-segin.dtsi
--
2.7.4
WARNING: multiple messages have this Message-ID (diff)
From: Stefan Riedmueller <s.riedmueller@phytec.de>
To: shawnguo@kernel.org, s.hauer@pengutronix.de, robh+dt@kernel.org,
mark.rutland@arm.com
Cc: devicetree@vger.kernel.org, martyn.welch@collabora.com,
linux-kernel@vger.kernel.org, linux-imx@nxp.com,
kernel@pengutronix.de, festevam@gmail.com,
linux-arm-kernel@lists.infradead.org
Subject: [PATCH 00/10] Add further support for PHYTEC phyBOARD-Segin
Date: Tue, 9 Jul 2019 09:19:17 +0200 [thread overview]
Message-ID: <1562656767-273566-1-git-send-email-s.riedmueller@phytec.de> (raw)
This patchstack adjusts the already existing naming for the PHYTEC
phyBOARD-Segin to the PHYTEC naming scheme that is already used with the
phyCORE-i.MX 6 and the phyBOARD-Mira.
Furthermore it introduces some small fixes and adds support for the PHYTEC
phyCORE-i.MX 6ULL which also comes with the phyBORAD-Segin. It comes in a
full featured option with either NAND flash or eMMC and a low cost option
only with NAND flash.
Stefan Riedmueller (10):
ARM: dts: imx6ul: phyboard-segin: Rename dts to PHYTEC name scheme
ARM: dts: imx6ul: segin: Add boot media to dts filename
ARM: dts: imx6ul: segin: Reduce eth drive strength
ARM: dts: imx6ul: segin: Fix LED naming for phyCORE and PEB-EVAL-01
ARM: dts: imx6ul: segin: Make FEC and ethphy configurable in dts
ARM: dts: imx6ul: segin: Only enable NAND if it is populated
ARM: dts: imx6ul: phycore: Add eMMC at usdhc2
ARM: dts: imx6ul: segin: Move ECSPI interface to board include file
ARM: dts: imx6ul: segin: Move machine include to dts files
ARM: dts: imx6ull: Add support for PHYTEC phyBOARD-Segin with i.MX
6ULL
arch/arm/boot/dts/Makefile | 5 +-
...-pcl063.dtsi => imx6ul-phytec-phycore-som.dtsi} | 51 ++++++++----
...ull.dts => imx6ul-phytec-segin-ff-rdk-nand.dts} | 42 +++++-----
...1.dtsi => imx6ul-phytec-segin-peb-eval-01.dtsi} | 16 ++--
...hyboard-segin.dtsi => imx6ul-phytec-segin.dtsi} | 31 ++++++--
arch/arm/boot/dts/imx6ull-phytec-phycore-som.dtsi | 24 ++++++
.../boot/dts/imx6ull-phytec-segin-ff-rdk-emmc.dts | 93 ++++++++++++++++++++++
.../boot/dts/imx6ull-phytec-segin-ff-rdk-nand.dts | 93 ++++++++++++++++++++++
.../boot/dts/imx6ull-phytec-segin-lc-rdk-nand.dts | 45 +++++++++++
.../boot/dts/imx6ull-phytec-segin-peb-eval-01.dtsi | 19 +++++
arch/arm/boot/dts/imx6ull-phytec-segin.dtsi | 38 +++++++++
11 files changed, 409 insertions(+), 48 deletions(-)
rename arch/arm/boot/dts/{imx6ul-phytec-pcl063.dtsi => imx6ul-phytec-phycore-som.dtsi} (72%)
rename arch/arm/boot/dts/{imx6ul-phytec-phyboard-segin-full.dts => imx6ul-phytec-segin-ff-rdk-nand.dts} (51%)
rename arch/arm/boot/dts/{imx6ul-phytec-peb-eval-01.dtsi => imx6ul-phytec-segin-peb-eval-01.dtsi} (84%)
rename arch/arm/boot/dts/{imx6ul-phytec-phyboard-segin.dtsi => imx6ul-phytec-segin.dtsi} (91%)
create mode 100644 arch/arm/boot/dts/imx6ull-phytec-phycore-som.dtsi
create mode 100644 arch/arm/boot/dts/imx6ull-phytec-segin-ff-rdk-emmc.dts
create mode 100644 arch/arm/boot/dts/imx6ull-phytec-segin-ff-rdk-nand.dts
create mode 100644 arch/arm/boot/dts/imx6ull-phytec-segin-lc-rdk-nand.dts
create mode 100644 arch/arm/boot/dts/imx6ull-phytec-segin-peb-eval-01.dtsi
create mode 100644 arch/arm/boot/dts/imx6ull-phytec-segin.dtsi
--
2.7.4
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next reply other threads:[~2019-07-09 7:34 UTC|newest]
Thread overview: 37+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-07-09 7:19 Stefan Riedmueller [this message]
2019-07-09 7:19 ` [PATCH 00/10] Add further support for PHYTEC phyBOARD-Segin Stefan Riedmueller
2019-07-09 7:19 ` Stefan Riedmueller
2019-07-09 7:19 ` [PATCH 01/10] ARM: dts: imx6ul: phyboard-segin: Rename dts to PHYTEC name scheme Stefan Riedmueller
2019-07-09 7:19 ` Stefan Riedmueller
2019-07-09 7:19 ` Stefan Riedmueller
2019-07-09 7:19 ` [PATCH 02/10] ARM: dts: imx6ul: segin: Add boot media to dts filename Stefan Riedmueller
2019-07-09 7:19 ` Stefan Riedmueller
2019-07-09 7:19 ` Stefan Riedmueller
2019-07-23 3:10 ` Shawn Guo
2019-07-23 3:10 ` Shawn Guo
2019-07-09 7:19 ` [PATCH 03/10] ARM: dts: imx6ul: segin: Reduce eth drive strength Stefan Riedmueller
2019-07-09 7:19 ` Stefan Riedmueller
2019-07-09 7:19 ` Stefan Riedmueller
2019-07-09 7:19 ` [PATCH 04/10] ARM: dts: imx6ul: segin: Fix LED naming for phyCORE and PEB-EVAL-01 Stefan Riedmueller
2019-07-09 7:19 ` Stefan Riedmueller
2019-07-09 7:19 ` Stefan Riedmueller
2019-07-09 7:19 ` [PATCH 05/10] ARM: dts: imx6ul: segin: Make FEC and ethphy configurable in dts Stefan Riedmueller
2019-07-09 7:19 ` Stefan Riedmueller
2019-07-09 7:19 ` Stefan Riedmueller
2019-07-09 7:19 ` [PATCH 06/10] ARM: dts: imx6ul: segin: Only enable NAND if it is populated Stefan Riedmueller
2019-07-09 7:19 ` Stefan Riedmueller
2019-07-09 7:19 ` Stefan Riedmueller
2019-07-09 7:19 ` [PATCH 07/10] ARM: dts: imx6ul: phycore: Add eMMC at usdhc2 Stefan Riedmueller
2019-07-09 7:19 ` Stefan Riedmueller
2019-07-09 7:19 ` Stefan Riedmueller
2019-07-09 7:19 ` [PATCH 08/10] ARM: dts: imx6ul: segin: Move ECSPI interface to board include file Stefan Riedmueller
2019-07-09 7:19 ` Stefan Riedmueller
2019-07-09 7:19 ` Stefan Riedmueller
2019-07-09 7:19 ` [PATCH 09/10] ARM: dts: imx6ul: segin: Move machine include to dts files Stefan Riedmueller
2019-07-09 7:19 ` Stefan Riedmueller
2019-07-09 7:19 ` Stefan Riedmueller
2019-07-09 7:19 ` [PATCH 10/10] ARM: dts: imx6ull: Add support for PHYTEC phyBOARD-Segin with i.MX 6ULL Stefan Riedmueller
2019-07-09 7:19 ` Stefan Riedmueller
2019-07-09 7:19 ` Stefan Riedmueller
2019-07-23 5:39 ` [PATCH 00/10] Add further support for PHYTEC phyBOARD-Segin Shawn Guo
2019-07-23 5:39 ` Shawn Guo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1562656767-273566-1-git-send-email-s.riedmueller@phytec.de \
--to=s.riedmueller@phytec.de \
--cc=devicetree@vger.kernel.org \
--cc=festevam@gmail.com \
--cc=kernel@pengutronix.de \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-imx@nxp.com \
--cc=linux-kernel@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=martyn.welch@collabora.com \
--cc=robh+dt@kernel.org \
--cc=s.hauer@pengutronix.de \
--cc=shawnguo@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.