All of lore.kernel.org
 help / color / mirror / Atom feed
From: Nayna Jain <nayna@linux.ibm.com>
To: linuxppc-dev@ozlabs.org, linux-efi@vger.kernel.org,
	linux-integrity@vger.kernel.org
Cc: linux-kernel@vger.kernel.org,
	Michael Ellerman <mpe@ellerman.id.au>,
	Benjamin Herrenschmidt <benh@kernel.crashing.org>,
	Paul Mackerras <paulus@samba.org>,
	Ard Biesheuvel <ard.biesheuvel@linaro.org>,
	Jeremy Kerr <jk@ozlabs.org>,
	Matthew Garret <matthew.garret@nebula.com>,
	Mimi Zohar <zohar@linux.ibm.com>,
	Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	Claudio Carvalho <cclaudio@linux.ibm.com>,
	George Wilson <gcwilson@linux.ibm.com>,
	Elaine Palmer <erpalmer@us.ibm.com>,
	Eric Ricther <erichte@linux.ibm.com>,
	"Oliver O'Halloran" <oohall@gmail.com>,
	Nayna Jain <nayna@linux.ibm.com>,
	Prakhar Srivastava <prsriva02@gmail.com>,
	Lakshmi Ramasubramanian <nramas@linux.microsoft.com>
Subject: [PATCH v8 3/8] powerpc: detect the trusted boot state of the system
Date: Sat, 19 Oct 2019 14:06:12 -0400	[thread overview]
Message-ID: <1571508377-23603-4-git-send-email-nayna@linux.ibm.com> (raw)
In-Reply-To: <1571508377-23603-1-git-send-email-nayna@linux.ibm.com>

While secure boot permits only properly verified signed kernels to be
booted, trusted boot takes a measurement of the kernel image prior to
boot that can be subsequently compared against good known values via
attestation services.

This patch reads the trusted boot state of a PowerNV system. The state
is used to conditionally enable additional measurement rules in the IMA
arch-specific policies.

Signed-off-by: Nayna Jain <nayna@linux.ibm.com>
---
 arch/powerpc/include/asm/secure_boot.h |  6 ++++++
 arch/powerpc/kernel/secure_boot.c      | 24 ++++++++++++++++++++++++
 2 files changed, 30 insertions(+)

diff --git a/arch/powerpc/include/asm/secure_boot.h b/arch/powerpc/include/asm/secure_boot.h
index 07d0fe0ca81f..a2ff556916c6 100644
--- a/arch/powerpc/include/asm/secure_boot.h
+++ b/arch/powerpc/include/asm/secure_boot.h
@@ -11,6 +11,7 @@
 #ifdef CONFIG_PPC_SECURE_BOOT
 
 bool is_ppc_secureboot_enabled(void);
+bool is_ppc_trustedboot_enabled(void);
 
 #else
 
@@ -19,5 +20,10 @@ static inline bool is_ppc_secureboot_enabled(void)
 	return false;
 }
 
+static inline bool is_ppc_trustedboot_enabled(void)
+{
+	return false;
+}
+
 #endif
 #endif
diff --git a/arch/powerpc/kernel/secure_boot.c b/arch/powerpc/kernel/secure_boot.c
index 99bba7915629..9753470ab08a 100644
--- a/arch/powerpc/kernel/secure_boot.c
+++ b/arch/powerpc/kernel/secure_boot.c
@@ -7,6 +7,17 @@
 #include <linux/of.h>
 #include <asm/secure_boot.h>
 
+static struct device_node *get_ppc_fw_sb_node(void)
+{
+	static const struct of_device_id ids[] = {
+		{ .compatible = "ibm,secureboot-v1", },
+		{ .compatible = "ibm,secureboot-v2", },
+		{},
+	};
+
+	return of_find_matching_node(NULL, ids);
+}
+
 bool is_ppc_secureboot_enabled(void)
 {
 	struct device_node *node;
@@ -28,3 +39,16 @@ bool is_ppc_secureboot_enabled(void)
 	pr_info("Secure boot mode %s\n", enabled ? "enabled" : "disabled");
 	return enabled;
 }
+
+bool is_ppc_trustedboot_enabled(void)
+{
+	struct device_node *node;
+	bool enabled = false;
+
+	node = get_ppc_fw_sb_node();
+	enabled = of_property_read_bool(node, "trusted-enabled");
+
+	pr_info("Trusted boot mode %s\n", enabled ? "enabled" : "disabled");
+
+	return enabled;
+}
-- 
2.20.1


WARNING: multiple messages have this Message-ID (diff)
From: Nayna Jain <nayna@linux.ibm.com>
To: linuxppc-dev@ozlabs.org, linux-efi@vger.kernel.org,
	linux-integrity@vger.kernel.org
Cc: Prakhar Srivastava <prsriva02@gmail.com>,
	Ard Biesheuvel <ard.biesheuvel@linaro.org>,
	Eric Ricther <erichte@linux.ibm.com>,
	Nayna Jain <nayna@linux.ibm.com>,
	linux-kernel@vger.kernel.org, Mimi Zohar <zohar@linux.ibm.com>,
	Claudio Carvalho <cclaudio@linux.ibm.com>,
	Matthew Garret <matthew.garret@nebula.com>,
	Lakshmi Ramasubramanian <nramas@linux.microsoft.com>,
	Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	Paul Mackerras <paulus@samba.org>, Jeremy Kerr <jk@ozlabs.org>,
	Elaine Palmer <erpalmer@us.ibm.com>,
	Oliver O'Halloran <oohall@gmail.com>,
	George Wilson <gcwilson@linux.ibm.com>
Subject: [PATCH v8 3/8] powerpc: detect the trusted boot state of the system
Date: Sat, 19 Oct 2019 14:06:12 -0400	[thread overview]
Message-ID: <1571508377-23603-4-git-send-email-nayna@linux.ibm.com> (raw)
In-Reply-To: <1571508377-23603-1-git-send-email-nayna@linux.ibm.com>

While secure boot permits only properly verified signed kernels to be
booted, trusted boot takes a measurement of the kernel image prior to
boot that can be subsequently compared against good known values via
attestation services.

This patch reads the trusted boot state of a PowerNV system. The state
is used to conditionally enable additional measurement rules in the IMA
arch-specific policies.

Signed-off-by: Nayna Jain <nayna@linux.ibm.com>
---
 arch/powerpc/include/asm/secure_boot.h |  6 ++++++
 arch/powerpc/kernel/secure_boot.c      | 24 ++++++++++++++++++++++++
 2 files changed, 30 insertions(+)

diff --git a/arch/powerpc/include/asm/secure_boot.h b/arch/powerpc/include/asm/secure_boot.h
index 07d0fe0ca81f..a2ff556916c6 100644
--- a/arch/powerpc/include/asm/secure_boot.h
+++ b/arch/powerpc/include/asm/secure_boot.h
@@ -11,6 +11,7 @@
 #ifdef CONFIG_PPC_SECURE_BOOT
 
 bool is_ppc_secureboot_enabled(void);
+bool is_ppc_trustedboot_enabled(void);
 
 #else
 
@@ -19,5 +20,10 @@ static inline bool is_ppc_secureboot_enabled(void)
 	return false;
 }
 
+static inline bool is_ppc_trustedboot_enabled(void)
+{
+	return false;
+}
+
 #endif
 #endif
diff --git a/arch/powerpc/kernel/secure_boot.c b/arch/powerpc/kernel/secure_boot.c
index 99bba7915629..9753470ab08a 100644
--- a/arch/powerpc/kernel/secure_boot.c
+++ b/arch/powerpc/kernel/secure_boot.c
@@ -7,6 +7,17 @@
 #include <linux/of.h>
 #include <asm/secure_boot.h>
 
+static struct device_node *get_ppc_fw_sb_node(void)
+{
+	static const struct of_device_id ids[] = {
+		{ .compatible = "ibm,secureboot-v1", },
+		{ .compatible = "ibm,secureboot-v2", },
+		{},
+	};
+
+	return of_find_matching_node(NULL, ids);
+}
+
 bool is_ppc_secureboot_enabled(void)
 {
 	struct device_node *node;
@@ -28,3 +39,16 @@ bool is_ppc_secureboot_enabled(void)
 	pr_info("Secure boot mode %s\n", enabled ? "enabled" : "disabled");
 	return enabled;
 }
+
+bool is_ppc_trustedboot_enabled(void)
+{
+	struct device_node *node;
+	bool enabled = false;
+
+	node = get_ppc_fw_sb_node();
+	enabled = of_property_read_bool(node, "trusted-enabled");
+
+	pr_info("Trusted boot mode %s\n", enabled ? "enabled" : "disabled");
+
+	return enabled;
+}
-- 
2.20.1


  parent reply	other threads:[~2019-10-19 18:06 UTC|newest]

Thread overview: 36+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-10-19 18:06 [PATCH v8 0/8] powerpc: Enabling IMA arch specific secure boot policies Nayna Jain
2019-10-19 18:06 ` Nayna Jain
2019-10-19 18:06 ` [PATCH v8 1/8] powerpc: detect the secure boot mode of the system Nayna Jain
2019-10-19 18:06   ` Nayna Jain
2019-10-22 23:37   ` Michael Ellerman
2019-10-22 23:37     ` Michael Ellerman
2019-10-19 18:06 ` [PATCH v8 2/8] powerpc/ima: add support to initialize ima policy rules Nayna Jain
2019-10-19 18:06   ` Nayna Jain
2019-10-20  0:16   ` Mimi Zohar
2019-10-20  0:16     ` Mimi Zohar
2019-10-19 18:06 ` Nayna Jain [this message]
2019-10-19 18:06   ` [PATCH v8 3/8] powerpc: detect the trusted boot state of the system Nayna Jain
2019-10-20 12:48   ` Mimi Zohar
2019-10-20 12:48     ` Mimi Zohar
2019-10-22 23:38   ` Michael Ellerman
2019-10-22 23:38     ` Michael Ellerman
2019-10-19 18:06 ` [PATCH v8 4/8] powerpc/ima: add measurement rules to ima arch specific policy Nayna Jain
2019-10-19 18:06   ` Nayna Jain
2019-10-20  0:16   ` Mimi Zohar
2019-10-20  0:16     ` Mimi Zohar
2019-10-19 18:06 ` [PATCH v8 5/8] ima: make process_buffer_measurement() generic Nayna Jain
2019-10-19 18:06   ` Nayna Jain
2019-10-20  1:21   ` Mimi Zohar
2019-10-20  1:21     ` Mimi Zohar
2019-10-19 18:06 ` [PATCH v8 6/8] certs: add wrapper function to check blacklisted binary hash Nayna Jain
2019-10-19 18:06   ` Nayna Jain
2019-10-19 18:06 ` [PATCH v8 7/8] ima: check against blacklisted hashes for files with modsig Nayna Jain
2019-10-19 18:06   ` Nayna Jain
2019-10-20  0:58   ` Mimi Zohar
2019-10-20  0:58     ` Mimi Zohar
2019-10-20 16:06   ` Mimi Zohar
2019-10-20 16:06     ` Mimi Zohar
2019-10-20 16:09     ` Mimi Zohar
2019-10-20 16:09       ` Mimi Zohar
2019-10-19 18:06 ` [PATCH v8 8/8] powerpc/ima: update ima arch policy to check for blacklist Nayna Jain
2019-10-19 18:06   ` Nayna Jain

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1571508377-23603-4-git-send-email-nayna@linux.ibm.com \
    --to=nayna@linux.ibm.com \
    --cc=ard.biesheuvel@linaro.org \
    --cc=benh@kernel.crashing.org \
    --cc=cclaudio@linux.ibm.com \
    --cc=erichte@linux.ibm.com \
    --cc=erpalmer@us.ibm.com \
    --cc=gcwilson@linux.ibm.com \
    --cc=gregkh@linuxfoundation.org \
    --cc=jk@ozlabs.org \
    --cc=linux-efi@vger.kernel.org \
    --cc=linux-integrity@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linuxppc-dev@ozlabs.org \
    --cc=matthew.garret@nebula.com \
    --cc=mpe@ellerman.id.au \
    --cc=nramas@linux.microsoft.com \
    --cc=oohall@gmail.com \
    --cc=paulus@samba.org \
    --cc=prsriva02@gmail.com \
    --cc=zohar@linux.ibm.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.