From: Fabrizio Castro <fabrizio.castro@bp.renesas.com> To: Neil Armstrong <narmstrong@baylibre.com>, David Airlie <airlied@linux.ie>, Daniel Vetter <daniel@ffwll.ch>, Rob Herring <robh+dt@kernel.org>, Mark Rutland <mark.rutland@arm.com>, Andrzej Hajda <a.hajda@samsung.com> Cc: Fabrizio Castro <fabrizio.castro@bp.renesas.com>, Simon Horman <horms@verge.net.au>, Geert Uytterhoeven <geert+renesas@glider.be>, Magnus Damm <magnus.damm@gmail.com>, Laurent Pinchart <Laurent.pinchart@ideasonboard.com>, Peter Rosin <peda@axentia.se>, dri-devel@lists.freedesktop.org, devicetree@vger.kernel.org, linux-renesas-soc@vger.kernel.org, Chris Paterson <Chris.Paterson2@renesas.com>, Biju Das <biju.das@bp.renesas.com>, Laurent Pinchart <laurent.pinchart@ideasonboard.com>, Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>, Jacopo Mondi <jacopo+renesas@jmondi.org> Subject: [PATCH v4 03/13] dt-bindings: display: bridge: lvds-transmitter: Absorb ti,ds90c185.txt Date: Wed, 13 Nov 2019 15:51:22 +0000 [thread overview] Message-ID: <1573660292-10629-4-git-send-email-fabrizio.castro@bp.renesas.com> (raw) In-Reply-To: <1573660292-10629-1-git-send-email-fabrizio.castro@bp.renesas.com> ti,ds90c185.txt documents LVDS encoders using the same driver as the one documented by lvds-transmitter.yaml. Since the properties listed in ti,ds90c185.txt are the same as the ones listed in lvds-transmitter.yaml, absorb the dt-binding into lvds-transmitter.yaml. Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> --- v3->v4: * New patch --- .../bindings/display/bridge/lvds-transmitter.yaml | 14 +++--- .../bindings/display/bridge/ti,ds90c185.txt | 55 ---------------------- 2 files changed, 8 insertions(+), 61 deletions(-) delete mode 100644 Documentation/devicetree/bindings/display/bridge/ti,ds90c185.txt diff --git a/Documentation/devicetree/bindings/display/bridge/lvds-transmitter.yaml b/Documentation/devicetree/bindings/display/bridge/lvds-transmitter.yaml index 2484737..a8326ce 100644 --- a/Documentation/devicetree/bindings/display/bridge/lvds-transmitter.yaml +++ b/Documentation/devicetree/bindings/display/bridge/lvds-transmitter.yaml @@ -31,11 +31,13 @@ description: | properties: compatible: description: | - Any encoder compatible with this generic binding, but with additional - properties not listed here, must define its own binding and list a device - specific compatible first followed by the generic compatible. - enum: - - lvds-encoder + Must list the device specific compatible string first, followed by the + generic compatible string. + items: + - enum: + - ti,ds90c185 # For the TI DS90C185 FPD-Link Serializer + - ti,ds90c187 # For the TI DS90C187 FPD-Link Serializer + - const: lvds-encoder # Generic LVDS encoder compatible fallback ports: type: object @@ -69,7 +71,7 @@ required: examples: - | lvds-encoder { - compatible = "lvds-encoder"; + compatible = "ti,ds90c185", "lvds-encoder"; ports { #address-cells = <1>; diff --git a/Documentation/devicetree/bindings/display/bridge/ti,ds90c185.txt b/Documentation/devicetree/bindings/display/bridge/ti,ds90c185.txt deleted file mode 100644 index e575f99..0000000 --- a/Documentation/devicetree/bindings/display/bridge/ti,ds90c185.txt +++ /dev/null @@ -1,55 +0,0 @@ -Texas Instruments FPD-Link (LVDS) Serializer --------------------------------------------- - -The DS90C185 and DS90C187 are low-power serializers for portable -battery-powered applications that reduces the size of the RGB -interface between the host GPU and the display. - -Required properties: - -- compatible: Should be - "ti,ds90c185", "lvds-encoder" for the TI DS90C185 FPD-Link Serializer - "ti,ds90c187", "lvds-encoder" for the TI DS90C187 FPD-Link Serializer - -Optional properties: - -- powerdown-gpios: Power down control GPIO (the PDB pin, active-low) - -Required nodes: - -The devices have two video ports. Their connections are modeled using the OF -graph bindings specified in Documentation/devicetree/bindings/graph.txt. - -- Video port 0 for parallel input -- Video port 1 for LVDS output - - -Example -------- - -lvds-encoder { - compatible = "ti,ds90c185", "lvds-encoder"; - - powerdown-gpios = <&gpio 17 GPIO_ACTIVE_LOW>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - - lvds_enc_in: endpoint { - remote-endpoint = <&lcdc_out_rgb>; - }; - }; - - port@1 { - reg = <1>; - - lvds_enc_out: endpoint { - remote-endpoint = <&lvds_panel_in>; - }; - }; - }; -}; -- 2.7.4
WARNING: multiple messages have this Message-ID (diff)
From: Fabrizio Castro <fabrizio.castro@bp.renesas.com> To: Neil Armstrong <narmstrong@baylibre.com>, David Airlie <airlied@linux.ie>, Daniel Vetter <daniel@ffwll.ch>, Rob Herring <robh+dt@kernel.org>, Mark Rutland <mark.rutland@arm.com>, Andrzej Hajda <a.hajda@samsung.com> Cc: Fabrizio Castro <fabrizio.castro@bp.renesas.com>, devicetree@vger.kernel.org, Chris Paterson <Chris.Paterson2@renesas.com>, Geert Uytterhoeven <geert+renesas@glider.be>, Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>, Magnus Damm <magnus.damm@gmail.com>, dri-devel@lists.freedesktop.org, Biju Das <biju.das@bp.renesas.com>, linux-renesas-soc@vger.kernel.org, Simon Horman <horms@verge.net.au>, Jacopo Mondi <jacopo+renesas@jmondi.org>, Laurent Pinchart <laurent.pinchart@ideasonboard.com>, Peter Rosin <peda@axentia.se> Subject: [PATCH v4 03/13] dt-bindings: display: bridge: lvds-transmitter: Absorb ti, ds90c185.txt Date: Wed, 13 Nov 2019 15:51:22 +0000 [thread overview] Message-ID: <1573660292-10629-4-git-send-email-fabrizio.castro@bp.renesas.com> (raw) In-Reply-To: <1573660292-10629-1-git-send-email-fabrizio.castro@bp.renesas.com> ti,ds90c185.txt documents LVDS encoders using the same driver as the one documented by lvds-transmitter.yaml. Since the properties listed in ti,ds90c185.txt are the same as the ones listed in lvds-transmitter.yaml, absorb the dt-binding into lvds-transmitter.yaml. Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> --- v3->v4: * New patch --- .../bindings/display/bridge/lvds-transmitter.yaml | 14 +++--- .../bindings/display/bridge/ti,ds90c185.txt | 55 ---------------------- 2 files changed, 8 insertions(+), 61 deletions(-) delete mode 100644 Documentation/devicetree/bindings/display/bridge/ti,ds90c185.txt diff --git a/Documentation/devicetree/bindings/display/bridge/lvds-transmitter.yaml b/Documentation/devicetree/bindings/display/bridge/lvds-transmitter.yaml index 2484737..a8326ce 100644 --- a/Documentation/devicetree/bindings/display/bridge/lvds-transmitter.yaml +++ b/Documentation/devicetree/bindings/display/bridge/lvds-transmitter.yaml @@ -31,11 +31,13 @@ description: | properties: compatible: description: | - Any encoder compatible with this generic binding, but with additional - properties not listed here, must define its own binding and list a device - specific compatible first followed by the generic compatible. - enum: - - lvds-encoder + Must list the device specific compatible string first, followed by the + generic compatible string. + items: + - enum: + - ti,ds90c185 # For the TI DS90C185 FPD-Link Serializer + - ti,ds90c187 # For the TI DS90C187 FPD-Link Serializer + - const: lvds-encoder # Generic LVDS encoder compatible fallback ports: type: object @@ -69,7 +71,7 @@ required: examples: - | lvds-encoder { - compatible = "lvds-encoder"; + compatible = "ti,ds90c185", "lvds-encoder"; ports { #address-cells = <1>; diff --git a/Documentation/devicetree/bindings/display/bridge/ti,ds90c185.txt b/Documentation/devicetree/bindings/display/bridge/ti,ds90c185.txt deleted file mode 100644 index e575f99..0000000 --- a/Documentation/devicetree/bindings/display/bridge/ti,ds90c185.txt +++ /dev/null @@ -1,55 +0,0 @@ -Texas Instruments FPD-Link (LVDS) Serializer --------------------------------------------- - -The DS90C185 and DS90C187 are low-power serializers for portable -battery-powered applications that reduces the size of the RGB -interface between the host GPU and the display. - -Required properties: - -- compatible: Should be - "ti,ds90c185", "lvds-encoder" for the TI DS90C185 FPD-Link Serializer - "ti,ds90c187", "lvds-encoder" for the TI DS90C187 FPD-Link Serializer - -Optional properties: - -- powerdown-gpios: Power down control GPIO (the PDB pin, active-low) - -Required nodes: - -The devices have two video ports. Their connections are modeled using the OF -graph bindings specified in Documentation/devicetree/bindings/graph.txt. - -- Video port 0 for parallel input -- Video port 1 for LVDS output - - -Example -------- - -lvds-encoder { - compatible = "ti,ds90c185", "lvds-encoder"; - - powerdown-gpios = <&gpio 17 GPIO_ACTIVE_LOW>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - - lvds_enc_in: endpoint { - remote-endpoint = <&lcdc_out_rgb>; - }; - }; - - port@1 { - reg = <1>; - - lvds_enc_out: endpoint { - remote-endpoint = <&lvds_panel_in>; - }; - }; - }; -}; -- 2.7.4 _______________________________________________ dri-devel mailing list dri-devel@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/dri-devel
next prev parent reply other threads:[~2019-11-13 16:31 UTC|newest] Thread overview: 118+ messages / expand[flat|nested] mbox.gz Atom feed top 2019-11-13 15:51 [PATCH v4 00/13] Add LCD panel support to iwg20d Fabrizio Castro 2019-11-13 15:51 ` Fabrizio Castro 2019-11-13 15:51 ` [PATCH v4 01/13] dt-bindings: display: bridge: Convert lvds-transmitter binding to json-schema Fabrizio Castro 2019-11-13 15:51 ` Fabrizio Castro 2019-11-18 21:35 ` Rob Herring 2019-11-18 21:35 ` Rob Herring 2019-11-18 21:35 ` Rob Herring 2019-11-18 23:51 ` Laurent Pinchart 2019-11-18 23:51 ` Laurent Pinchart 2019-11-13 15:51 ` [PATCH v4 02/13] dt-bindings: display: bridge: lvds-transmitter: Document powerdown-gpios Fabrizio Castro 2019-11-13 15:51 ` Fabrizio Castro 2019-11-18 21:36 ` Rob Herring 2019-11-18 21:36 ` Rob Herring 2019-11-18 21:36 ` Rob Herring 2019-11-18 23:55 ` Laurent Pinchart 2019-11-18 23:55 ` Laurent Pinchart 2019-11-13 15:51 ` Fabrizio Castro [this message] 2019-11-13 15:51 ` [PATCH v4 03/13] dt-bindings: display: bridge: lvds-transmitter: Absorb ti, ds90c185.txt Fabrizio Castro 2019-11-18 21:38 ` [PATCH v4 03/13] dt-bindings: display: bridge: lvds-transmitter: Absorb ti,ds90c185.txt Rob Herring 2019-11-18 21:38 ` Rob Herring 2019-11-18 21:38 ` Rob Herring 2019-11-18 23:56 ` Laurent Pinchart 2019-11-18 23:56 ` Laurent Pinchart 2019-11-13 15:51 ` [PATCH v4 04/13] dt-bindings: display: bridge: lvds-transmitter: Document "ti,sn75lvds83" Fabrizio Castro 2019-11-13 15:51 ` [PATCH v4 04/13] dt-bindings: display: bridge: lvds-transmitter: Document "ti, sn75lvds83" Fabrizio Castro 2019-11-18 21:38 ` [PATCH v4 04/13] dt-bindings: display: bridge: lvds-transmitter: Document "ti,sn75lvds83" Rob Herring 2019-11-18 21:38 ` Rob Herring 2019-11-18 21:38 ` Rob Herring 2019-11-18 23:57 ` Laurent Pinchart 2019-11-18 23:57 ` Laurent Pinchart 2019-11-13 15:51 ` [PATCH v4 05/13] drm/bridge: Repurpose lvds-encoder.c Fabrizio Castro 2019-11-13 15:51 ` Fabrizio Castro 2019-11-19 0:00 ` Laurent Pinchart 2019-11-19 0:00 ` Laurent Pinchart 2019-11-13 15:51 ` [PATCH v4 06/13] drm/bridge: lvds-codec: Add "lvds-decoder" support Fabrizio Castro 2019-11-13 15:51 ` Fabrizio Castro 2019-11-19 0:02 ` Laurent Pinchart 2019-11-19 0:02 ` Laurent Pinchart 2019-12-13 17:10 ` Laurent Pinchart 2019-12-13 17:10 ` Laurent Pinchart 2019-12-16 21:22 ` Laurent Pinchart 2019-12-16 21:22 ` Laurent Pinchart 2019-12-17 11:02 ` Fabrizio Castro 2019-12-17 11:02 ` Fabrizio Castro 2019-12-17 12:21 ` Geert Uytterhoeven 2019-12-17 12:21 ` Geert Uytterhoeven 2019-12-17 12:31 ` Fabrizio Castro 2019-12-17 12:31 ` Fabrizio Castro 2019-12-17 12:38 ` Geert Uytterhoeven 2019-12-17 12:38 ` Geert Uytterhoeven 2019-12-17 13:54 ` Laurent Pinchart 2019-12-17 13:54 ` Laurent Pinchart 2019-12-17 22:06 ` Fabrizio Castro 2019-12-17 22:06 ` Fabrizio Castro 2019-12-17 23:08 ` Laurent Pinchart 2019-12-17 23:08 ` Laurent Pinchart 2019-12-18 12:00 ` Fabrizio Castro 2019-12-18 12:00 ` Fabrizio Castro 2019-12-17 23:07 ` [PATCH v4.1 " Laurent Pinchart 2019-12-17 23:07 ` Laurent Pinchart 2019-11-13 15:51 ` [PATCH v4 07/13] drm/bridge: lvds-codec: Simplify panel DT node localisation Fabrizio Castro 2019-11-13 15:51 ` Fabrizio Castro 2019-11-19 0:03 ` Laurent Pinchart 2019-11-19 0:03 ` Laurent Pinchart 2019-11-13 15:51 ` [PATCH v4 08/13] dt-bindings: display: bridge: Repurpose lvds-encoder Fabrizio Castro 2019-11-13 15:51 ` Fabrizio Castro 2019-11-18 21:40 ` Rob Herring 2019-11-18 21:40 ` Rob Herring 2019-11-18 21:40 ` Rob Herring 2019-11-19 0:07 ` Laurent Pinchart 2019-11-19 0:07 ` Laurent Pinchart 2019-11-19 10:35 ` Fabrizio Castro 2019-11-19 10:35 ` Fabrizio Castro 2019-11-13 15:51 ` [PATCH v4 09/13] dt-bindings: display: bridge: lvds-codec: Document ti,ds90cf384a Fabrizio Castro 2019-11-13 15:51 ` [PATCH v4 09/13] dt-bindings: display: bridge: lvds-codec: Document ti, ds90cf384a Fabrizio Castro 2019-11-18 21:41 ` [PATCH v4 09/13] dt-bindings: display: bridge: lvds-codec: Document ti,ds90cf384a Rob Herring 2019-11-18 21:41 ` Rob Herring 2019-11-18 21:41 ` Rob Herring 2019-11-19 0:09 ` Laurent Pinchart 2019-11-19 0:09 ` Laurent Pinchart 2019-11-13 15:51 ` [PATCH v4 10/13] ARM: dts: iwg20d-q7-common: Add LCD support Fabrizio Castro 2019-11-13 15:51 ` Fabrizio Castro 2019-11-19 0:10 ` Laurent Pinchart 2019-11-19 0:10 ` Laurent Pinchart 2019-11-25 10:30 ` Geert Uytterhoeven 2019-11-25 10:30 ` Geert Uytterhoeven 2019-11-13 15:51 ` [PATCH v4 11/13] ARM: shmobile_defconfig: Enable support for panels from EDT Fabrizio Castro 2019-11-13 15:51 ` Fabrizio Castro 2019-11-19 0:12 ` Laurent Pinchart 2019-11-19 0:12 ` Laurent Pinchart 2019-11-25 10:30 ` Geert Uytterhoeven 2019-11-25 10:30 ` Geert Uytterhoeven 2019-11-13 15:51 ` [PATCH v4 12/13] [HACK] drm/bridge: lvds-codec: Enforce device specific compatible strings Fabrizio Castro 2019-11-13 15:51 ` Fabrizio Castro 2019-11-19 0:16 ` Laurent Pinchart 2019-11-19 0:16 ` Laurent Pinchart 2019-11-19 11:17 ` Fabrizio Castro 2019-11-19 11:17 ` Fabrizio Castro 2019-11-19 21:51 ` Laurent Pinchart 2019-11-19 21:51 ` Laurent Pinchart 2019-11-21 16:00 ` Fabrizio Castro 2019-11-21 16:00 ` Fabrizio Castro 2019-11-22 8:16 ` Geert Uytterhoeven 2019-11-22 8:16 ` Geert Uytterhoeven 2019-11-25 11:17 ` Fabrizio Castro 2019-11-25 11:17 ` Fabrizio Castro 2019-12-02 9:42 ` Laurent Pinchart 2019-12-02 9:42 ` Laurent Pinchart 2019-11-13 15:51 ` [PATCH v4 13/13] [HACK] dt-bindings: display: bridge: lvds-codec: Absorb thine,thc63lvdm83d.txt Fabrizio Castro 2019-11-13 15:51 ` [PATCH v4 13/13] [HACK] dt-bindings: display: bridge: lvds-codec: Absorb thine, thc63lvdm83d.txt Fabrizio Castro 2019-11-18 21:51 ` [PATCH v4 13/13] [HACK] dt-bindings: display: bridge: lvds-codec: Absorb thine,thc63lvdm83d.txt Rob Herring 2019-11-18 21:51 ` Rob Herring 2019-11-19 0:19 ` Laurent Pinchart 2019-11-19 0:19 ` Laurent Pinchart 2019-12-18 11:52 ` [PATCH v4 00/13] Add LCD panel support to iwg20d Neil Armstrong 2019-12-18 11:52 ` Neil Armstrong 2019-12-18 14:05 ` Fabrizio Castro 2019-12-18 14:05 ` Fabrizio Castro
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1573660292-10629-4-git-send-email-fabrizio.castro@bp.renesas.com \ --to=fabrizio.castro@bp.renesas.com \ --cc=Chris.Paterson2@renesas.com \ --cc=Laurent.pinchart@ideasonboard.com \ --cc=a.hajda@samsung.com \ --cc=airlied@linux.ie \ --cc=biju.das@bp.renesas.com \ --cc=daniel@ffwll.ch \ --cc=devicetree@vger.kernel.org \ --cc=dri-devel@lists.freedesktop.org \ --cc=geert+renesas@glider.be \ --cc=horms@verge.net.au \ --cc=jacopo+renesas@jmondi.org \ --cc=kieran.bingham+renesas@ideasonboard.com \ --cc=linux-renesas-soc@vger.kernel.org \ --cc=magnus.damm@gmail.com \ --cc=mark.rutland@arm.com \ --cc=narmstrong@baylibre.com \ --cc=peda@axentia.se \ --cc=robh+dt@kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.