From: Hanjie Lin <hanjie.lin@amlogic.com>
To: Jerome Brunet <jbrunet@baylibre.com>,
Neil Armstrong <narmstrong@baylibre.com>,
Rob Herring <robh@kernel.org>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Kevin Hilman <khilman@baylibre.com>
Cc: Hanjie Lin <hanjie.lin@amlogic.com>,
Yue Wang <yue.wang@amlogic.com>,
<linux-amlogic@lists.infradead.org>,
<linux-arm-kernel@lists.infradead.org>,
<linux-usb@vger.kernel.org>, <devicetree@vger.kernel.org>,
Carlo Caione <carlo@caione.org>,
Michael Turquette <mturquette@baylibre.com>,
Stephen Boyd <sboyd@kernel.org>,
Martin Blumenstingl <martin.blumenstingl@googlemail.com>,
Liang Yang <liang.yang@amlogic.com>,
Jianxin Pan <jianxin.pan@amlogic.com>,
Qiufang Dai <qiufang.dai@amlogic.com>,
Jian Hu <jian.hu@amlogic.com>,
Victor Wan <victor.wan@amlogic.com>,
Xingyu Chen <xingyu.chen@amlogic.com>
Subject: [PATCH v3 6/6] arm64: dts: meson: a1: Enable DWC3 controller
Date: Fri, 27 Dec 2019 14:36:46 +0800 [thread overview]
Message-ID: <1577428606-69855-7-git-send-email-hanjie.lin@amlogic.com> (raw)
In-Reply-To: <1577428606-69855-1-git-send-email-hanjie.lin@amlogic.com>
Enable DWC3 controller for Meson A1 SoC.
Signed-off-by: Hanjie Lin <hanjie.lin@amlogic.com>
Signed-off-by: Yue Wang <yue.wang@amlogic.com>
---
arch/arm64/boot/dts/amlogic/meson-a1.dtsi | 33 +++++++++++++++++++++++++++++++
1 file changed, 33 insertions(+)
diff --git a/arch/arm64/boot/dts/amlogic/meson-a1.dtsi b/arch/arm64/boot/dts/amlogic/meson-a1.dtsi
index bd63374a..76f787d 100644
--- a/arch/arm64/boot/dts/amlogic/meson-a1.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-a1.dtsi
@@ -7,6 +7,8 @@
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/power/meson-a1-power.h>
#include <dt-bindings/reset/amlogic,meson-a1-reset.h>
+#include <dt-bindings/clock/a1-pll-clkc.h>
+#include <dt-bindings/clock/a1-clkc.h>
/ {
compatible = "amlogic,a1";
@@ -125,6 +127,37 @@
#interrupt-cells = <3>;
#address-cells = <0>;
};
+
+ usb: usb@ffe09000 {
+ status = "okay";
+ compatible = "amlogic,meson-a1-usb-ctrl";
+ reg = <0x0 0xffe09000 0x0 0xa0>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ clocks = <&clkc_periphs CLKID_USB_CTRL>,
+ <&clkc_periphs CLKID_USB_BUS>,
+ <&clkc_periphs CLKID_XTAL_USB_PHY>,
+ <&clkc_periphs CLKID_XTAL_USB_CTRL>;
+ clock-names = "usb_ctrl", "usb_bus", "xtal_usb_phy",
+ "xtal_usb_ctrl";
+ resets = <&reset RESET_USBCTRL>;
+
+ dr_mode = "host";
+
+ phys = <&usb2_phy1>;
+ phy-names = "usb2-phy1";
+
+ dwc3: usb@ff400000 {
+ compatible = "snps,dwc3";
+ reg = <0x0 0xff400000 0x0 0x100000>;
+ interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
+ dr_mode = "host";
+ snps,dis_u2_susphy_quirk;
+ snps,quirk-frame-length-adjustment = <0x20>;
+ };
+ };
};
timer {
--
2.7.4
WARNING: multiple messages have this Message-ID (diff)
From: Hanjie Lin <hanjie.lin@amlogic.com>
To: Jerome Brunet <jbrunet@baylibre.com>,
Neil Armstrong <narmstrong@baylibre.com>,
Rob Herring <robh@kernel.org>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Kevin Hilman <khilman@baylibre.com>
Cc: devicetree@vger.kernel.org, Hanjie Lin <hanjie.lin@amlogic.com>,
Victor Wan <victor.wan@amlogic.com>,
Jianxin Pan <jianxin.pan@amlogic.com>,
Stephen Boyd <sboyd@kernel.org>,
Michael Turquette <mturquette@baylibre.com>,
linux-usb@vger.kernel.org, Yue Wang <yue.wang@amlogic.com>,
Martin Blumenstingl <martin.blumenstingl@googlemail.com>,
Liang Yang <liang.yang@amlogic.com>,
Qiufang Dai <qiufang.dai@amlogic.com>,
Xingyu Chen <xingyu.chen@amlogic.com>,
Carlo Caione <carlo@caione.org>,
linux-amlogic@lists.infradead.org,
linux-arm-kernel@lists.infradead.org,
Jian Hu <jian.hu@amlogic.com>
Subject: [PATCH v3 6/6] arm64: dts: meson: a1: Enable DWC3 controller
Date: Fri, 27 Dec 2019 14:36:46 +0800 [thread overview]
Message-ID: <1577428606-69855-7-git-send-email-hanjie.lin@amlogic.com> (raw)
In-Reply-To: <1577428606-69855-1-git-send-email-hanjie.lin@amlogic.com>
Enable DWC3 controller for Meson A1 SoC.
Signed-off-by: Hanjie Lin <hanjie.lin@amlogic.com>
Signed-off-by: Yue Wang <yue.wang@amlogic.com>
---
arch/arm64/boot/dts/amlogic/meson-a1.dtsi | 33 +++++++++++++++++++++++++++++++
1 file changed, 33 insertions(+)
diff --git a/arch/arm64/boot/dts/amlogic/meson-a1.dtsi b/arch/arm64/boot/dts/amlogic/meson-a1.dtsi
index bd63374a..76f787d 100644
--- a/arch/arm64/boot/dts/amlogic/meson-a1.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-a1.dtsi
@@ -7,6 +7,8 @@
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/power/meson-a1-power.h>
#include <dt-bindings/reset/amlogic,meson-a1-reset.h>
+#include <dt-bindings/clock/a1-pll-clkc.h>
+#include <dt-bindings/clock/a1-clkc.h>
/ {
compatible = "amlogic,a1";
@@ -125,6 +127,37 @@
#interrupt-cells = <3>;
#address-cells = <0>;
};
+
+ usb: usb@ffe09000 {
+ status = "okay";
+ compatible = "amlogic,meson-a1-usb-ctrl";
+ reg = <0x0 0xffe09000 0x0 0xa0>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ clocks = <&clkc_periphs CLKID_USB_CTRL>,
+ <&clkc_periphs CLKID_USB_BUS>,
+ <&clkc_periphs CLKID_XTAL_USB_PHY>,
+ <&clkc_periphs CLKID_XTAL_USB_CTRL>;
+ clock-names = "usb_ctrl", "usb_bus", "xtal_usb_phy",
+ "xtal_usb_ctrl";
+ resets = <&reset RESET_USBCTRL>;
+
+ dr_mode = "host";
+
+ phys = <&usb2_phy1>;
+ phy-names = "usb2-phy1";
+
+ dwc3: usb@ff400000 {
+ compatible = "snps,dwc3";
+ reg = <0x0 0xff400000 0x0 0x100000>;
+ interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
+ dr_mode = "host";
+ snps,dis_u2_susphy_quirk;
+ snps,quirk-frame-length-adjustment = <0x20>;
+ };
+ };
};
timer {
--
2.7.4
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
WARNING: multiple messages have this Message-ID (diff)
From: Hanjie Lin <hanjie.lin@amlogic.com>
To: Jerome Brunet <jbrunet@baylibre.com>,
Neil Armstrong <narmstrong@baylibre.com>,
Rob Herring <robh@kernel.org>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Kevin Hilman <khilman@baylibre.com>
Cc: devicetree@vger.kernel.org, Hanjie Lin <hanjie.lin@amlogic.com>,
Victor Wan <victor.wan@amlogic.com>,
Jianxin Pan <jianxin.pan@amlogic.com>,
Stephen Boyd <sboyd@kernel.org>,
Michael Turquette <mturquette@baylibre.com>,
linux-usb@vger.kernel.org, Yue Wang <yue.wang@amlogic.com>,
Martin Blumenstingl <martin.blumenstingl@googlemail.com>,
Liang Yang <liang.yang@amlogic.com>,
Qiufang Dai <qiufang.dai@amlogic.com>,
Xingyu Chen <xingyu.chen@amlogic.com>,
Carlo Caione <carlo@caione.org>,
linux-amlogic@lists.infradead.org,
linux-arm-kernel@lists.infradead.org,
Jian Hu <jian.hu@amlogic.com>
Subject: [PATCH v3 6/6] arm64: dts: meson: a1: Enable DWC3 controller
Date: Fri, 27 Dec 2019 14:36:46 +0800 [thread overview]
Message-ID: <1577428606-69855-7-git-send-email-hanjie.lin@amlogic.com> (raw)
In-Reply-To: <1577428606-69855-1-git-send-email-hanjie.lin@amlogic.com>
Enable DWC3 controller for Meson A1 SoC.
Signed-off-by: Hanjie Lin <hanjie.lin@amlogic.com>
Signed-off-by: Yue Wang <yue.wang@amlogic.com>
---
arch/arm64/boot/dts/amlogic/meson-a1.dtsi | 33 +++++++++++++++++++++++++++++++
1 file changed, 33 insertions(+)
diff --git a/arch/arm64/boot/dts/amlogic/meson-a1.dtsi b/arch/arm64/boot/dts/amlogic/meson-a1.dtsi
index bd63374a..76f787d 100644
--- a/arch/arm64/boot/dts/amlogic/meson-a1.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-a1.dtsi
@@ -7,6 +7,8 @@
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/power/meson-a1-power.h>
#include <dt-bindings/reset/amlogic,meson-a1-reset.h>
+#include <dt-bindings/clock/a1-pll-clkc.h>
+#include <dt-bindings/clock/a1-clkc.h>
/ {
compatible = "amlogic,a1";
@@ -125,6 +127,37 @@
#interrupt-cells = <3>;
#address-cells = <0>;
};
+
+ usb: usb@ffe09000 {
+ status = "okay";
+ compatible = "amlogic,meson-a1-usb-ctrl";
+ reg = <0x0 0xffe09000 0x0 0xa0>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ clocks = <&clkc_periphs CLKID_USB_CTRL>,
+ <&clkc_periphs CLKID_USB_BUS>,
+ <&clkc_periphs CLKID_XTAL_USB_PHY>,
+ <&clkc_periphs CLKID_XTAL_USB_CTRL>;
+ clock-names = "usb_ctrl", "usb_bus", "xtal_usb_phy",
+ "xtal_usb_ctrl";
+ resets = <&reset RESET_USBCTRL>;
+
+ dr_mode = "host";
+
+ phys = <&usb2_phy1>;
+ phy-names = "usb2-phy1";
+
+ dwc3: usb@ff400000 {
+ compatible = "snps,dwc3";
+ reg = <0x0 0xff400000 0x0 0x100000>;
+ interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
+ dr_mode = "host";
+ snps,dis_u2_susphy_quirk;
+ snps,quirk-frame-length-adjustment = <0x20>;
+ };
+ };
};
timer {
--
2.7.4
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
next prev parent reply other threads:[~2019-12-27 6:37 UTC|newest]
Thread overview: 54+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-12-27 6:36 [PATCH v3 0/6] arm64: meson: Add support for USB on Amlogic A1 Hanjie Lin
2019-12-27 6:36 ` Hanjie Lin
2019-12-27 6:36 ` Hanjie Lin
2019-12-27 6:36 ` [PATCH v3 1/6] dt-bindings: phy: Add Amlogic A1 USB2 PHY Bindings Hanjie Lin
2019-12-27 6:36 ` Hanjie Lin
2019-12-27 6:36 ` Hanjie Lin
2020-01-04 0:28 ` Rob Herring
2020-01-04 0:28 ` Rob Herring
2020-01-04 0:28 ` Rob Herring
2020-01-07 2:35 ` Hanjie Lin
2020-01-07 2:35 ` Hanjie Lin
2020-01-07 2:35 ` Hanjie Lin
2019-12-27 6:36 ` [PATCH v3 2/6] dt-bindings: usb: dwc3: Add the Amlogic A1 Family DWC3 Glue Bindings Hanjie Lin
2019-12-27 6:36 ` Hanjie Lin
2019-12-27 6:36 ` Hanjie Lin
2020-01-04 0:32 ` Rob Herring
2020-01-04 0:32 ` Rob Herring
2020-01-04 0:32 ` Rob Herring
2020-01-07 2:43 ` Hanjie Lin
2020-01-07 2:43 ` Hanjie Lin
2020-01-07 2:43 ` Hanjie Lin
2019-12-27 6:36 ` [PATCH v3 3/6] phy: amlogic: Add Amlogic A1 USB2 PHY Driver Hanjie Lin
2019-12-27 6:36 ` Hanjie Lin
2019-12-27 6:36 ` Hanjie Lin
2019-12-27 16:40 ` Martin Blumenstingl
2019-12-27 16:40 ` Martin Blumenstingl
2019-12-27 16:40 ` Martin Blumenstingl
2020-01-02 0:10 ` Hanjie Lin
2020-01-02 0:10 ` Hanjie Lin
2020-01-02 0:10 ` Hanjie Lin
2019-12-28 2:53 ` Chunfeng Yun
2019-12-28 2:53 ` Chunfeng Yun
2019-12-28 2:53 ` Chunfeng Yun
2020-01-02 0:12 ` Hanjie Lin
2020-01-02 0:12 ` Hanjie Lin
2020-01-02 0:12 ` Hanjie Lin
2019-12-27 6:36 ` [PATCH v3 4/6] usb: dwc3: Add Amlogic A1 DWC3 glue Hanjie Lin
2019-12-27 6:36 ` Hanjie Lin
2019-12-27 6:36 ` Hanjie Lin
2019-12-27 16:38 ` Martin Blumenstingl
2019-12-27 16:38 ` Martin Blumenstingl
2019-12-27 16:38 ` Martin Blumenstingl
2020-01-02 0:30 ` Hanjie Lin
2020-01-02 0:30 ` Hanjie Lin
2020-01-02 0:30 ` Hanjie Lin
2020-01-02 21:52 ` Martin Blumenstingl
2020-01-02 21:52 ` Martin Blumenstingl
2020-01-02 21:52 ` Martin Blumenstingl
2019-12-27 6:36 ` [PATCH v3 5/6] arm64: dts: meson: a1: Enable USB2 PHY Hanjie Lin
2019-12-27 6:36 ` Hanjie Lin
2019-12-27 6:36 ` Hanjie Lin
2019-12-27 6:36 ` Hanjie Lin [this message]
2019-12-27 6:36 ` [PATCH v3 6/6] arm64: dts: meson: a1: Enable DWC3 controller Hanjie Lin
2019-12-27 6:36 ` Hanjie Lin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1577428606-69855-7-git-send-email-hanjie.lin@amlogic.com \
--to=hanjie.lin@amlogic.com \
--cc=carlo@caione.org \
--cc=devicetree@vger.kernel.org \
--cc=gregkh@linuxfoundation.org \
--cc=jbrunet@baylibre.com \
--cc=jian.hu@amlogic.com \
--cc=jianxin.pan@amlogic.com \
--cc=khilman@baylibre.com \
--cc=liang.yang@amlogic.com \
--cc=linux-amlogic@lists.infradead.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-usb@vger.kernel.org \
--cc=martin.blumenstingl@googlemail.com \
--cc=mturquette@baylibre.com \
--cc=narmstrong@baylibre.com \
--cc=qiufang.dai@amlogic.com \
--cc=robh@kernel.org \
--cc=sboyd@kernel.org \
--cc=victor.wan@amlogic.com \
--cc=xingyu.chen@amlogic.com \
--cc=yue.wang@amlogic.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.