From: Robin Gong <yibin.gong@nxp.com> To: vkoul@kernel.org, robh+dt@kernel.org, shawnguo@kernel.org, s.hauer@pengutronix.de, festevam@gmail.com, catalin.marinas@arm.com, will@kernel.org, dan.j.williams@intel.com, angelo@sysam.it Cc: kernel@pengutronix.de, linux-imx@nxp.com, dmaengine@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-arm-kernel@lists.infradead.org Subject: [PATCH v2 0/9] add fsl-edma3 support Date: Wed, 15 Jul 2020 01:41:39 +0800 [thread overview] Message-ID: <1594748508-22179-1-git-send-email-yibin.gong@nxp.com> (raw) This patchset enable fsl-edma3 which is used on i.mx8qxp/i.mx8qm. There are big changes on fsl-edma so that add indepent fsl-edma3 here: 1. split memory address for per channel, while all channels share the same memory address and the same control registers CR/INT..etc. 2. all TCD registers of channels are continuous on legacy edma but split on edma3. 3. per interrupt per channel on edma3. 4. totally different register layer and add some register such as SBR 5. power domain support, per domain per channel. The first 4 patches are used for preparing no any function changes involed. v2: 1. fix yaml binding doc build warning. Robin Gong (9): dmaengine: fsl-edma: move edma_request functions into drvdata dmaengine: fsl-edma-common: add condition check for fsl_edma_chan_mux dmaengine: fsl-edma-common: add fsl_chan into fsl_edma_fill_tcd dmaengine: fsl-edma-common: export fsl_edma_set_tcd_regs dmaengine: fsl-edma3: add fsl-edma3 driver dt-bindings: dma: add fsl-edma3 yaml firmware: imx: scu-pd: correct dma resource arm64: dts: imx8qxp: add edma2 arm64: defconfig: add CONFIG_FSL_EDMA3 .../devicetree/bindings/dma/nxp,fsl-edma3.yaml | 134 ++++++ arch/arm64/boot/dts/freescale/imx8qxp.dtsi | 38 ++ arch/arm64/configs/defconfig | 1 + drivers/dma/Kconfig | 12 + drivers/dma/Makefile | 1 + drivers/dma/fsl-edma-common.c | 151 +++++-- drivers/dma/fsl-edma-common.h | 30 ++ drivers/dma/fsl-edma.c | 10 +- drivers/dma/fsl-edma3.c | 493 +++++++++++++++++++++ drivers/dma/mcf-edma.c | 2 + drivers/firmware/imx/scu-pd.c | 7 +- 11 files changed, 849 insertions(+), 30 deletions(-) create mode 100644 Documentation/devicetree/bindings/dma/nxp,fsl-edma3.yaml create mode 100644 drivers/dma/fsl-edma3.c -- 2.7.4
WARNING: multiple messages have this Message-ID (diff)
From: Robin Gong <yibin.gong@nxp.com> To: vkoul@kernel.org, robh+dt@kernel.org, shawnguo@kernel.org, s.hauer@pengutronix.de, festevam@gmail.com, catalin.marinas@arm.com, will@kernel.org, dan.j.williams@intel.com, angelo@sysam.it Cc: devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-imx@nxp.com, kernel@pengutronix.de, dmaengine@vger.kernel.org, linux-arm-kernel@lists.infradead.org Subject: [PATCH v2 0/9] add fsl-edma3 support Date: Wed, 15 Jul 2020 01:41:39 +0800 [thread overview] Message-ID: <1594748508-22179-1-git-send-email-yibin.gong@nxp.com> (raw) This patchset enable fsl-edma3 which is used on i.mx8qxp/i.mx8qm. There are big changes on fsl-edma so that add indepent fsl-edma3 here: 1. split memory address for per channel, while all channels share the same memory address and the same control registers CR/INT..etc. 2. all TCD registers of channels are continuous on legacy edma but split on edma3. 3. per interrupt per channel on edma3. 4. totally different register layer and add some register such as SBR 5. power domain support, per domain per channel. The first 4 patches are used for preparing no any function changes involed. v2: 1. fix yaml binding doc build warning. Robin Gong (9): dmaengine: fsl-edma: move edma_request functions into drvdata dmaengine: fsl-edma-common: add condition check for fsl_edma_chan_mux dmaengine: fsl-edma-common: add fsl_chan into fsl_edma_fill_tcd dmaengine: fsl-edma-common: export fsl_edma_set_tcd_regs dmaengine: fsl-edma3: add fsl-edma3 driver dt-bindings: dma: add fsl-edma3 yaml firmware: imx: scu-pd: correct dma resource arm64: dts: imx8qxp: add edma2 arm64: defconfig: add CONFIG_FSL_EDMA3 .../devicetree/bindings/dma/nxp,fsl-edma3.yaml | 134 ++++++ arch/arm64/boot/dts/freescale/imx8qxp.dtsi | 38 ++ arch/arm64/configs/defconfig | 1 + drivers/dma/Kconfig | 12 + drivers/dma/Makefile | 1 + drivers/dma/fsl-edma-common.c | 151 +++++-- drivers/dma/fsl-edma-common.h | 30 ++ drivers/dma/fsl-edma.c | 10 +- drivers/dma/fsl-edma3.c | 493 +++++++++++++++++++++ drivers/dma/mcf-edma.c | 2 + drivers/firmware/imx/scu-pd.c | 7 +- 11 files changed, 849 insertions(+), 30 deletions(-) create mode 100644 Documentation/devicetree/bindings/dma/nxp,fsl-edma3.yaml create mode 100644 drivers/dma/fsl-edma3.c -- 2.7.4 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next reply other threads:[~2020-07-14 9:27 UTC|newest] Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top 2020-07-14 17:41 Robin Gong [this message] 2020-07-14 17:41 ` [PATCH v2 0/9] add fsl-edma3 support Robin Gong 2020-07-14 17:41 ` [PATCH v2 1/9] dmaengine: fsl-edma: move edma_request functions into drvdata Robin Gong 2020-07-14 17:41 ` Robin Gong 2020-07-14 17:41 ` [PATCH v2 2/9] dmaengine: fsl-edma-common: add condition check for fsl_edma_chan_mux Robin Gong 2020-07-14 17:41 ` Robin Gong 2020-07-14 17:41 ` [PATCH v2 3/9] dmaengine: fsl-edma-common: add fsl_chan into fsl_edma_fill_tcd Robin Gong 2020-07-14 17:41 ` Robin Gong 2020-07-14 17:41 ` [PATCH v2 4/9] dmaengine: fsl-edma-common: export fsl_edma_set_tcd_regs Robin Gong 2020-07-14 17:41 ` Robin Gong 2020-07-14 17:41 ` [PATCH v2 5/9] dmaengine: fsl-edma3: add fsl-edma3 driver Robin Gong 2020-07-14 17:41 ` Robin Gong 2020-07-14 17:41 ` [PATCH v2 6/9] dt-bindings: dma: add fsl-edma3 yaml Robin Gong 2020-07-14 17:41 ` Robin Gong 2020-07-16 19:47 ` Rob Herring 2020-07-16 19:47 ` Rob Herring 2020-07-24 10:13 ` Robin Gong 2020-07-24 10:13 ` Robin Gong 2020-07-14 17:41 ` [PATCH v2 7/9] firmware: imx: scu-pd: correct dma resource Robin Gong 2020-07-14 17:41 ` Robin Gong 2020-07-14 17:41 ` [PATCH v2 8/9] arm64: dts: imx8qxp: add edma2 Robin Gong 2020-07-14 17:41 ` Robin Gong 2020-07-14 17:41 ` [PATCH v2 9/9] arm64: defconfig: add CONFIG_FSL_EDMA3 Robin Gong 2020-07-14 17:41 ` Robin Gong
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1594748508-22179-1-git-send-email-yibin.gong@nxp.com \ --to=yibin.gong@nxp.com \ --cc=angelo@sysam.it \ --cc=catalin.marinas@arm.com \ --cc=dan.j.williams@intel.com \ --cc=devicetree@vger.kernel.org \ --cc=dmaengine@vger.kernel.org \ --cc=festevam@gmail.com \ --cc=kernel@pengutronix.de \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-imx@nxp.com \ --cc=linux-kernel@vger.kernel.org \ --cc=robh+dt@kernel.org \ --cc=s.hauer@pengutronix.de \ --cc=shawnguo@kernel.org \ --cc=vkoul@kernel.org \ --cc=will@kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.