From: Dong Aisheng <aisheng.dong@nxp.com>
To: linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org
Cc: dongas86@gmail.com, kernel@pengutronix.de, shawnguo@kernel.org,
robh+dt@kernel.org, linux-imx@nxp.com, jan.kiszka@siemens.com,
Dong Aisheng <aisheng.dong@nxp.com>
Subject: [PATCH v5 13/18] arm64: dts: imx8: split adma ss into dma and audio ss
Date: Fri, 5 Mar 2021 21:17:43 +0800 [thread overview]
Message-ID: <1614950268-22073-15-git-send-email-aisheng.dong@nxp.com> (raw)
In-Reply-To: <1614950268-22073-1-git-send-email-aisheng.dong@nxp.com>
amda ss is consisted of dma and audio ss in qxp which are
also used in qm.
Let's split them into two ss for better code reuse.
Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>
---
ChangeLog:
v4->v5:
* no changes
v3->4:
* remove amda_* prefix for new boards colibri
v2->v3:
* use new clock-indices IDs
* remove ss prefix for adma
v1->v2:
* change to the new two cell scu clk binding
---
.../boot/dts/freescale/imx8-ss-adma.dtsi | 244 +-----------------
.../boot/dts/freescale/imx8-ss-audio.dtsi | 68 +++++
.../arm64/boot/dts/freescale/imx8-ss-dma.dtsi | 202 +++++++++++++++
.../boot/dts/freescale/imx8qxp-ai_ml.dts | 16 +-
.../freescale/imx8qxp-colibri-eval-v3.dtsi | 8 +-
.../boot/dts/freescale/imx8qxp-colibri.dtsi | 12 +-
arch/arm64/boot/dts/freescale/imx8qxp-mek.dts | 46 ++--
.../boot/dts/freescale/imx8qxp-ss-adma.dtsi | 16 +-
arch/arm64/boot/dts/freescale/imx8qxp.dtsi | 16 +-
9 files changed, 329 insertions(+), 299 deletions(-)
create mode 100644 arch/arm64/boot/dts/freescale/imx8-ss-audio.dtsi
create mode 100644 arch/arm64/boot/dts/freescale/imx8-ss-dma.dtsi
diff --git a/arch/arm64/boot/dts/freescale/imx8-ss-adma.dtsi b/arch/arm64/boot/dts/freescale/imx8-ss-adma.dtsi
index ff0696d80654..9386d1a59e82 100644
--- a/arch/arm64/boot/dts/freescale/imx8-ss-adma.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8-ss-adma.dtsi
@@ -4,245 +4,5 @@
* Dong Aisheng <aisheng.dong@nxp.com>
*/
-#include <dt-bindings/clock/imx8-lpcg.h>
-#include <dt-bindings/firmware/imx/rsrc.h>
-
-adma_subsys: bus@59000000 {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0x59000000 0x0 0x59000000 0x2000000>;
-
- dma_ipg_clk: clock-dma-ipg {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <120000000>;
- clock-output-names = "dma_ipg_clk";
- };
-
- dsp_lpcg: clock-controller@59580000 {
- compatible = "fsl,imx8qxp-lpcg";
- reg = <0x59580000 0x10000>;
- #clock-cells = <1>;
- clocks = <&dma_ipg_clk>,
- <&dma_ipg_clk>,
- <&dma_ipg_clk>;
- clock-indices = <IMX_LPCG_CLK_4>, <IMX_LPCG_CLK_5>,
- <IMX_LPCG_CLK_7>;
- clock-output-names = "dsp_lpcg_adb_clk",
- "dsp_lpcg_ipg_clk",
- "dsp_lpcg_core_clk";
- power-domains = <&pd IMX_SC_R_DSP>;
- };
-
- dsp_ram_lpcg: clock-controller@59590000 {
- compatible = "fsl,imx8qxp-lpcg";
- reg = <0x59590000 0x10000>;
- #clock-cells = <1>;
- clocks = <&dma_ipg_clk>;
- clock-indices = <IMX_LPCG_CLK_4>;
- clock-output-names = "dsp_ram_lpcg_ipg_clk";
- power-domains = <&pd IMX_SC_R_DSP_RAM>;
- };
-
- adma_dsp: dsp@596e8000 {
- compatible = "fsl,imx8qxp-dsp";
- reg = <0x596e8000 0x88000>;
- clocks = <&dsp_lpcg IMX_LPCG_CLK_5>,
- <&dsp_ram_lpcg IMX_LPCG_CLK_4>,
- <&dsp_lpcg IMX_LPCG_CLK_7>;
- clock-names = "ipg", "ocram", "core";
- power-domains = <&pd IMX_SC_R_MU_13A>,
- <&pd IMX_SC_R_MU_13B>,
- <&pd IMX_SC_R_DSP>,
- <&pd IMX_SC_R_DSP_RAM>;
- mbox-names = "txdb0", "txdb1",
- "rxdb0", "rxdb1";
- mboxes = <&lsio_mu13 2 0>,
- <&lsio_mu13 2 1>,
- <&lsio_mu13 3 0>,
- <&lsio_mu13 3 1>;
- memory-region = <&dsp_reserved>;
- status = "disabled";
- };
-
- adma_lpuart0: serial@5a060000 {
- reg = <0x5a060000 0x1000>;
- interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&uart0_lpcg IMX_LPCG_CLK_4>,
- <&uart0_lpcg IMX_LPCG_CLK_0>;
- clock-names = "ipg", "baud";
- power-domains = <&pd IMX_SC_R_UART_0>;
- status = "disabled";
- };
-
- adma_lpuart1: serial@5a070000 {
- reg = <0x5a070000 0x1000>;
- interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&uart1_lpcg IMX_LPCG_CLK_4>,
- <&uart1_lpcg IMX_LPCG_CLK_0>;
- clock-names = "ipg", "baud";
- power-domains = <&pd IMX_SC_R_UART_1>;
- status = "disabled";
- };
-
- adma_lpuart2: serial@5a080000 {
- reg = <0x5a080000 0x1000>;
- interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&uart2_lpcg IMX_LPCG_CLK_4>,
- <&uart2_lpcg IMX_LPCG_CLK_0>;
- clock-names = "ipg", "baud";
- power-domains = <&pd IMX_SC_R_UART_2>;
- status = "disabled";
- };
-
- adma_lpuart3: serial@5a090000 {
- reg = <0x5a090000 0x1000>;
- interrupts = <GIC_SPI 228 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&uart3_lpcg IMX_LPCG_CLK_4>,
- <&uart3_lpcg IMX_LPCG_CLK_0>;
- clock-names = "ipg", "baud";
- power-domains = <&pd IMX_SC_R_UART_3>;
- status = "disabled";
- };
-
- uart0_lpcg: clock-controller@5a460000 {
- compatible = "fsl,imx8qxp-lpcg";
- reg = <0x5a460000 0x10000>;
- #clock-cells = <1>;
- clocks = <&clk IMX_SC_R_UART_0 IMX_SC_PM_CLK_PER>,
- <&dma_ipg_clk>;
- clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>;
- clock-output-names = "uart0_lpcg_baud_clk",
- "uart0_lpcg_ipg_clk";
- power-domains = <&pd IMX_SC_R_UART_0>;
- };
-
- uart1_lpcg: clock-controller@5a470000 {
- compatible = "fsl,imx8qxp-lpcg";
- reg = <0x5a470000 0x10000>;
- #clock-cells = <1>;
- clocks = <&clk IMX_SC_R_UART_1 IMX_SC_PM_CLK_PER>,
- <&dma_ipg_clk>;
- clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>;
- clock-output-names = "uart1_lpcg_baud_clk",
- "uart1_lpcg_ipg_clk";
- power-domains = <&pd IMX_SC_R_UART_1>;
- };
-
- uart2_lpcg: clock-controller@5a480000 {
- compatible = "fsl,imx8qxp-lpcg";
- reg = <0x5a480000 0x10000>;
- #clock-cells = <1>;
- clocks = <&clk IMX_SC_R_UART_2 IMX_SC_PM_CLK_PER>,
- <&dma_ipg_clk>;
- clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>;
- clock-output-names = "uart2_lpcg_baud_clk",
- "uart2_lpcg_ipg_clk";
- power-domains = <&pd IMX_SC_R_UART_2>;
- };
-
- uart3_lpcg: clock-controller@5a490000 {
- compatible = "fsl,imx8qxp-lpcg";
- reg = <0x5a490000 0x10000>;
- #clock-cells = <1>;
- clocks = <&clk IMX_SC_R_UART_3 IMX_SC_PM_CLK_PER>,
- <&dma_ipg_clk>;
- clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>;
- clock-output-names = "uart3_lpcg_baud_clk",
- "uart3_lpcg_ipg_clk";
- power-domains = <&pd IMX_SC_R_UART_3>;
- };
-
- adma_i2c0: i2c@5a800000 {
- reg = <0x5a800000 0x4000>;
- interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&i2c0_lpcg IMX_LPCG_CLK_0>;
- clock-names = "per";
- assigned-clocks = <&clk IMX_SC_R_I2C_0 IMX_SC_PM_CLK_PER>;
- assigned-clock-rates = <24000000>;
- power-domains = <&pd IMX_SC_R_I2C_0>;
- status = "disabled";
- };
-
- adma_i2c1: i2c@5a810000 {
- reg = <0x5a810000 0x4000>;
- interrupts = <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&i2c1_lpcg IMX_LPCG_CLK_0>;
- clock-names = "per";
- assigned-clocks = <&clk IMX_SC_R_I2C_1 IMX_SC_PM_CLK_PER>;
- assigned-clock-rates = <24000000>;
- power-domains = <&pd IMX_SC_R_I2C_1>;
- status = "disabled";
- };
-
- adma_i2c2: i2c@5a820000 {
- reg = <0x5a820000 0x4000>;
- interrupts = <GIC_SPI 222 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&i2c2_lpcg IMX_LPCG_CLK_0>;
- clock-names = "per";
- assigned-clocks = <&clk IMX_SC_R_I2C_2 IMX_SC_PM_CLK_PER>;
- assigned-clock-rates = <24000000>;
- power-domains = <&pd IMX_SC_R_I2C_2>;
- status = "disabled";
- };
-
- adma_i2c3: i2c@5a830000 {
- reg = <0x5a830000 0x4000>;
- interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&i2c3_lpcg IMX_LPCG_CLK_0>;
- clock-names = "per";
- assigned-clocks = <&clk IMX_SC_R_I2C_3 IMX_SC_PM_CLK_PER>;
- assigned-clock-rates = <24000000>;
- power-domains = <&pd IMX_SC_R_I2C_3>;
- status = "disabled";
- };
-
- i2c0_lpcg: clock-controller@5ac00000 {
- compatible = "fsl,imx8qxp-lpcg";
- reg = <0x5ac00000 0x10000>;
- #clock-cells = <1>;
- clocks = <&clk IMX_SC_R_I2C_0 IMX_SC_PM_CLK_PER>,
- <&dma_ipg_clk>;
- clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>;
- clock-output-names = "i2c0_lpcg_clk",
- "i2c0_lpcg_ipg_clk";
- power-domains = <&pd IMX_SC_R_I2C_0>;
- };
-
- i2c1_lpcg: clock-controller@5ac10000 {
- compatible = "fsl,imx8qxp-lpcg";
- reg = <0x5ac10000 0x10000>;
- #clock-cells = <1>;
- clocks = <&clk IMX_SC_R_I2C_1 IMX_SC_PM_CLK_PER>,
- <&dma_ipg_clk>;
- clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>;
- clock-output-names = "i2c1_lpcg_clk",
- "i2c1_lpcg_ipg_clk";
- power-domains = <&pd IMX_SC_R_I2C_1>;
- };
-
- i2c2_lpcg: clock-controller@5ac20000 {
- compatible = "fsl,imx8qxp-lpcg";
- reg = <0x5ac20000 0x10000>;
- #clock-cells = <1>;
- clocks = <&clk IMX_SC_R_I2C_2 IMX_SC_PM_CLK_PER>,
- <&dma_ipg_clk>;
- clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>;
- clock-output-names = "i2c2_lpcg_clk",
- "i2c2_lpcg_ipg_clk";
- power-domains = <&pd IMX_SC_R_I2C_2>;
- };
-
- i2c3_lpcg: clock-controller@5ac30000 {
- compatible = "fsl,imx8qxp-lpcg";
- reg = <0x5ac30000 0x10000>;
- #clock-cells = <1>;
- clocks = <&clk IMX_SC_R_I2C_3 IMX_SC_PM_CLK_PER>,
- <&dma_ipg_clk>;
- clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>;
- clock-output-names = "i2c3_lpcg_clk",
- "i2c3_lpcg_ipg_clk";
- power-domains = <&pd IMX_SC_R_I2C_3>;
- };
-};
+#include "imx8-ss-audio.dtsi"
+#include "imx8-ss-dma.dtsi"
diff --git a/arch/arm64/boot/dts/freescale/imx8-ss-audio.dtsi b/arch/arm64/boot/dts/freescale/imx8-ss-audio.dtsi
new file mode 100644
index 000000000000..6c8d75ef9250
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8-ss-audio.dtsi
@@ -0,0 +1,68 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2018-2019 NXP
+ * Dong Aisheng <aisheng.dong@nxp.com>
+ */
+
+#include <dt-bindings/clock/imx8-lpcg.h>
+#include <dt-bindings/firmware/imx/rsrc.h>
+
+audio_subsys: bus@59000000 {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x59000000 0x0 0x59000000 0x1000000>;
+
+ audio_ipg_clk: clock-audio-ipg {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <120000000>;
+ clock-output-names = "audio_ipg_clk";
+ };
+
+ dsp_lpcg: clock-controller@59580000 {
+ compatible = "fsl,imx8qxp-lpcg";
+ reg = <0x59580000 0x10000>;
+ #clock-cells = <1>;
+ clocks = <&audio_ipg_clk>,
+ <&audio_ipg_clk>,
+ <&audio_ipg_clk>;
+ clock-indices = <IMX_LPCG_CLK_4>, <IMX_LPCG_CLK_5>,
+ <IMX_LPCG_CLK_7>;
+ clock-output-names = "dsp_lpcg_adb_clk",
+ "dsp_lpcg_ipg_clk",
+ "dsp_lpcg_core_clk";
+ power-domains = <&pd IMX_SC_R_DSP>;
+ };
+
+ dsp_ram_lpcg: clock-controller@59590000 {
+ compatible = "fsl,imx8qxp-lpcg";
+ reg = <0x59590000 0x10000>;
+ #clock-cells = <1>;
+ clocks = <&audio_ipg_clk>;
+ clock-indices = <IMX_LPCG_CLK_4>;
+ clock-output-names = "dsp_ram_lpcg_ipg_clk";
+ power-domains = <&pd IMX_SC_R_DSP_RAM>;
+ };
+
+ dsp: dsp@596e8000 {
+ compatible = "fsl,imx8qxp-dsp";
+ reg = <0x596e8000 0x88000>;
+ clocks = <&dsp_lpcg IMX_LPCG_CLK_5>,
+ <&dsp_ram_lpcg IMX_LPCG_CLK_4>,
+ <&dsp_lpcg IMX_LPCG_CLK_7>;
+ clock-names = "ipg", "ocram", "core";
+ power-domains = <&pd IMX_SC_R_MU_13A>,
+ <&pd IMX_SC_R_MU_13B>,
+ <&pd IMX_SC_R_DSP>,
+ <&pd IMX_SC_R_DSP_RAM>;
+ mbox-names = "txdb0", "txdb1",
+ "rxdb0", "rxdb1";
+ mboxes = <&lsio_mu13 2 0>,
+ <&lsio_mu13 2 1>,
+ <&lsio_mu13 3 0>,
+ <&lsio_mu13 3 1>;
+ memory-region = <&dsp_reserved>;
+ status = "disabled";
+ };
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8-ss-dma.dtsi b/arch/arm64/boot/dts/freescale/imx8-ss-dma.dtsi
new file mode 100644
index 000000000000..960a802b8b6e
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8-ss-dma.dtsi
@@ -0,0 +1,202 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2018-2019 NXP
+ * Dong Aisheng <aisheng.dong@nxp.com>
+ */
+
+#include <dt-bindings/clock/imx8-lpcg.h>
+#include <dt-bindings/firmware/imx/rsrc.h>
+
+dma_subsys: bus@5a000000 {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x5a000000 0x0 0x5a000000 0x1000000>;
+
+ dma_ipg_clk: clock-dma-ipg {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <120000000>;
+ clock-output-names = "dma_ipg_clk";
+ };
+
+ lpuart0: serial@5a060000 {
+ reg = <0x5a060000 0x1000>;
+ interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&uart0_lpcg IMX_LPCG_CLK_4>,
+ <&uart0_lpcg IMX_LPCG_CLK_0>;
+ clock-names = "ipg", "baud";
+ power-domains = <&pd IMX_SC_R_UART_0>;
+ status = "disabled";
+ };
+
+ lpuart1: serial@5a070000 {
+ reg = <0x5a070000 0x1000>;
+ interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&uart1_lpcg IMX_LPCG_CLK_4>,
+ <&uart1_lpcg IMX_LPCG_CLK_0>;
+ clock-names = "ipg", "baud";
+ power-domains = <&pd IMX_SC_R_UART_1>;
+ status = "disabled";
+ };
+
+ lpuart2: serial@5a080000 {
+ reg = <0x5a080000 0x1000>;
+ interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&uart2_lpcg IMX_LPCG_CLK_4>,
+ <&uart2_lpcg IMX_LPCG_CLK_0>;
+ clock-names = "ipg", "baud";
+ power-domains = <&pd IMX_SC_R_UART_2>;
+ status = "disabled";
+ };
+
+ lpuart3: serial@5a090000 {
+ reg = <0x5a090000 0x1000>;
+ interrupts = <GIC_SPI 228 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&uart3_lpcg IMX_LPCG_CLK_4>,
+ <&uart3_lpcg IMX_LPCG_CLK_0>;
+ clock-names = "ipg", "baud";
+ power-domains = <&pd IMX_SC_R_UART_3>;
+ status = "disabled";
+ };
+
+ uart0_lpcg: clock-controller@5a460000 {
+ compatible = "fsl,imx8qxp-lpcg";
+ reg = <0x5a460000 0x10000>;
+ #clock-cells = <1>;
+ clocks = <&clk IMX_SC_R_UART_0 IMX_SC_PM_CLK_PER>,
+ <&dma_ipg_clk>;
+ clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>;
+ clock-output-names = "uart0_lpcg_baud_clk",
+ "uart0_lpcg_ipg_clk";
+ power-domains = <&pd IMX_SC_R_UART_0>;
+ };
+
+ uart1_lpcg: clock-controller@5a470000 {
+ compatible = "fsl,imx8qxp-lpcg";
+ reg = <0x5a470000 0x10000>;
+ #clock-cells = <1>;
+ clocks = <&clk IMX_SC_R_UART_1 IMX_SC_PM_CLK_PER>,
+ <&dma_ipg_clk>;
+ clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>;
+ clock-output-names = "uart1_lpcg_baud_clk",
+ "uart1_lpcg_ipg_clk";
+ power-domains = <&pd IMX_SC_R_UART_1>;
+ };
+
+ uart2_lpcg: clock-controller@5a480000 {
+ compatible = "fsl,imx8qxp-lpcg";
+ reg = <0x5a480000 0x10000>;
+ #clock-cells = <1>;
+ clocks = <&clk IMX_SC_R_UART_2 IMX_SC_PM_CLK_PER>,
+ <&dma_ipg_clk>;
+ clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>;
+ clock-output-names = "uart2_lpcg_baud_clk",
+ "uart2_lpcg_ipg_clk";
+ power-domains = <&pd IMX_SC_R_UART_2>;
+ };
+
+ uart3_lpcg: clock-controller@5a490000 {
+ compatible = "fsl,imx8qxp-lpcg";
+ reg = <0x5a490000 0x10000>;
+ #clock-cells = <1>;
+ clocks = <&clk IMX_SC_R_UART_3 IMX_SC_PM_CLK_PER>,
+ <&dma_ipg_clk>;
+ clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>;
+ clock-output-names = "uart3_lpcg_baud_clk",
+ "uart3_lpcg_ipg_clk";
+ power-domains = <&pd IMX_SC_R_UART_3>;
+ };
+
+ i2c0: i2c@5a800000 {
+ reg = <0x5a800000 0x4000>;
+ interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&i2c0_lpcg IMX_LPCG_CLK_0>;
+ clock-names = "per";
+ assigned-clocks = <&clk IMX_SC_R_I2C_0 IMX_SC_PM_CLK_PER>;
+ assigned-clock-rates = <24000000>;
+ power-domains = <&pd IMX_SC_R_I2C_0>;
+ status = "disabled";
+ };
+
+ i2c1: i2c@5a810000 {
+ reg = <0x5a810000 0x4000>;
+ interrupts = <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&i2c1_lpcg IMX_LPCG_CLK_0>;
+ clock-names = "per";
+ assigned-clocks = <&clk IMX_SC_R_I2C_1 IMX_SC_PM_CLK_PER>;
+ assigned-clock-rates = <24000000>;
+ power-domains = <&pd IMX_SC_R_I2C_1>;
+ status = "disabled";
+ };
+
+ i2c2: i2c@5a820000 {
+ reg = <0x5a820000 0x4000>;
+ interrupts = <GIC_SPI 222 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&i2c2_lpcg IMX_LPCG_CLK_0>;
+ clock-names = "per";
+ assigned-clocks = <&clk IMX_SC_R_I2C_2 IMX_SC_PM_CLK_PER>;
+ assigned-clock-rates = <24000000>;
+ power-domains = <&pd IMX_SC_R_I2C_2>;
+ status = "disabled";
+ };
+
+ i2c3: i2c@5a830000 {
+ reg = <0x5a830000 0x4000>;
+ interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&i2c3_lpcg IMX_LPCG_CLK_0>;
+ clock-names = "per";
+ assigned-clocks = <&clk IMX_SC_R_I2C_3 IMX_SC_PM_CLK_PER>;
+ assigned-clock-rates = <24000000>;
+ power-domains = <&pd IMX_SC_R_I2C_3>;
+ status = "disabled";
+ };
+
+ i2c0_lpcg: clock-controller@5ac00000 {
+ compatible = "fsl,imx8qxp-lpcg";
+ reg = <0x5ac00000 0x10000>;
+ #clock-cells = <1>;
+ clocks = <&clk IMX_SC_R_I2C_0 IMX_SC_PM_CLK_PER>,
+ <&dma_ipg_clk>;
+ clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>;
+ clock-output-names = "i2c0_lpcg_clk",
+ "i2c0_lpcg_ipg_clk";
+ power-domains = <&pd IMX_SC_R_I2C_0>;
+ };
+
+ i2c1_lpcg: clock-controller@5ac10000 {
+ compatible = "fsl,imx8qxp-lpcg";
+ reg = <0x5ac10000 0x10000>;
+ #clock-cells = <1>;
+ clocks = <&clk IMX_SC_R_I2C_1 IMX_SC_PM_CLK_PER>,
+ <&dma_ipg_clk>;
+ clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>;
+ clock-output-names = "i2c1_lpcg_clk",
+ "i2c1_lpcg_ipg_clk";
+ power-domains = <&pd IMX_SC_R_I2C_1>;
+ };
+
+ i2c2_lpcg: clock-controller@5ac20000 {
+ compatible = "fsl,imx8qxp-lpcg";
+ reg = <0x5ac20000 0x10000>;
+ #clock-cells = <1>;
+ clocks = <&clk IMX_SC_R_I2C_2 IMX_SC_PM_CLK_PER>,
+ <&dma_ipg_clk>;
+ clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>;
+ clock-output-names = "i2c2_lpcg_clk",
+ "i2c2_lpcg_ipg_clk";
+ power-domains = <&pd IMX_SC_R_I2C_2>;
+ };
+
+ i2c3_lpcg: clock-controller@5ac30000 {
+ compatible = "fsl,imx8qxp-lpcg";
+ reg = <0x5ac30000 0x10000>;
+ #clock-cells = <1>;
+ clocks = <&clk IMX_SC_R_I2C_3 IMX_SC_PM_CLK_PER>,
+ <&dma_ipg_clk>;
+ clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>;
+ clock-output-names = "i2c3_lpcg_clk",
+ "i2c3_lpcg_ipg_clk";
+ power-domains = <&pd IMX_SC_R_I2C_3>;
+ };
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8qxp-ai_ml.dts b/arch/arm64/boot/dts/freescale/imx8qxp-ai_ml.dts
index b5352706e3f0..47bb68823b24 100644
--- a/arch/arm64/boot/dts/freescale/imx8qxp-ai_ml.dts
+++ b/arch/arm64/boot/dts/freescale/imx8qxp-ai_ml.dts
@@ -13,13 +13,13 @@ / {
compatible = "einfochips,imx8qxp-ai_ml", "fsl,imx8qxp";
aliases {
- serial1 = &adma_lpuart1;
- serial2 = &adma_lpuart2;
- serial3 = &adma_lpuart3;
+ serial1 = &lpuart1;
+ serial2 = &lpuart2;
+ serial3 = &lpuart3;
};
chosen {
- stdout-path = &adma_lpuart2;
+ stdout-path = &lpuart2;
};
memory@80000000 {
@@ -82,7 +82,7 @@ sdio_pwrseq: sdio-pwrseq {
};
/* BT */
-&adma_lpuart0 {
+&lpuart0 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_lpuart0>;
uart-has-rtscts;
@@ -90,21 +90,21 @@ &adma_lpuart0 {
};
/* LS-UART0 */
-&adma_lpuart1 {
+&lpuart1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_lpuart1>;
status = "okay";
};
/* Debug */
-&adma_lpuart2 {
+&lpuart2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_lpuart2>;
status = "okay";
};
/* PCI-E UART */
-&adma_lpuart3 {
+&lpuart3 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_lpuart3>;
status = "okay";
diff --git a/arch/arm64/boot/dts/freescale/imx8qxp-colibri-eval-v3.dtsi b/arch/arm64/boot/dts/freescale/imx8qxp-colibri-eval-v3.dtsi
index c7336f387605..144fc9e82da7 100644
--- a/arch/arm64/boot/dts/freescale/imx8qxp-colibri-eval-v3.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8qxp-colibri-eval-v3.dtsi
@@ -26,7 +26,7 @@ wakeup {
};
};
-&adma_i2c1 {
+&i2c1 {
status = "okay";
/* M41T0M6 real time clock on carrier board */
@@ -37,17 +37,17 @@ rtc_i2c: rtc@68 {
};
/* Colibri UART_B */
-&adma_lpuart0 {
+&lpuart0 {
status= "okay";
};
/* Colibri UART_C */
-&adma_lpuart2 {
+&lpuart2 {
status= "okay";
};
/* Colibri UART_A */
-&adma_lpuart3 {
+&lpuart3 {
status= "okay";
};
diff --git a/arch/arm64/boot/dts/freescale/imx8qxp-colibri.dtsi b/arch/arm64/boot/dts/freescale/imx8qxp-colibri.dtsi
index f38acff0d25c..89d70e030433 100644
--- a/arch/arm64/boot/dts/freescale/imx8qxp-colibri.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8qxp-colibri.dtsi
@@ -10,7 +10,7 @@ / {
compatible = "toradex,colibri-imx8x", "fsl,imx8qxp";
chosen {
- stdout-path = &adma_lpuart3;
+ stdout-path = &lpuart3;
};
reg_module_3v3: regulator-module-3v3 {
@@ -22,7 +22,7 @@ reg_module_3v3: regulator-module-3v3 {
};
/* On-module I2C */
-&adma_i2c0 {
+&i2c0 {
#address-cells = <1>;
#size-cells = <0>;
clock-frequency = <100000>;
@@ -49,7 +49,7 @@ touchscreen@2c {
};
/* Colibri I2C */
-&adma_i2c1 {
+&i2c1 {
#address-cells = <1>;
#size-cells = <0>;
clock-frequency = <100000>;
@@ -58,19 +58,19 @@ &adma_i2c1 {
};
/* Colibri UART_B */
-&adma_lpuart0 {
+&lpuart0 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_lpuart0>;
};
/* Colibri UART_C */
-&adma_lpuart2 {
+&lpuart2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_lpuart2>;
};
/* Colibri UART_A */
-&adma_lpuart3 {
+&lpuart3 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_lpuart3>, <&pinctrl_lpuart3_ctrl>;
};
diff --git a/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts b/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts
index c40bbb313b78..863232a47004 100644
--- a/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts
+++ b/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts
@@ -12,7 +12,7 @@ / {
compatible = "fsl,imx8qxp-mek", "fsl,imx8qxp";
chosen {
- stdout-path = &adma_lpuart0;
+ stdout-path = &lpuart0;
};
memory@80000000 {
@@ -30,11 +30,30 @@ reg_usdhc2_vmmc: usdhc2-vmmc {
};
};
-&adma_dsp {
+&dsp {
status = "okay";
};
-&adma_i2c1 {
+&fec1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_fec1>;
+ phy-mode = "rgmii-id";
+ phy-handle = <ðphy0>;
+ fsl,magic-packet;
+ status = "okay";
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ethphy0: ethernet-phy@0 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <0>;
+ };
+ };
+};
+
+&i2c1 {
#address-cells = <1>;
#size-cells = <0>;
clock-frequency = <100000>;
@@ -110,31 +129,12 @@ light-sensor@44 {
};
};
-&adma_lpuart0 {
+&lpuart0 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_lpuart0>;
status = "okay";
};
-&fec1 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_fec1>;
- phy-mode = "rgmii-id";
- phy-handle = <ðphy0>;
- fsl,magic-packet;
- status = "okay";
-
- mdio {
- #address-cells = <1>;
- #size-cells = <0>;
-
- ethphy0: ethernet-phy@0 {
- compatible = "ethernet-phy-ieee802.3-c22";
- reg = <0>;
- };
- };
-};
-
&scu_key {
status = "okay";
};
diff --git a/arch/arm64/boot/dts/freescale/imx8qxp-ss-adma.dtsi b/arch/arm64/boot/dts/freescale/imx8qxp-ss-adma.dtsi
index 3dc3238e7ca6..dc1daa8dc72f 100644
--- a/arch/arm64/boot/dts/freescale/imx8qxp-ss-adma.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8qxp-ss-adma.dtsi
@@ -4,34 +4,34 @@
* Dong Aisheng <aisheng.dong@nxp.com>
*/
-&adma_lpuart0 {
+&lpuart0 {
compatible = "fsl,imx8qxp-lpuart", "fsl,imx7ulp-lpuart";
};
-&adma_lpuart1 {
+&lpuart1 {
compatible = "fsl,imx8qxp-lpuart", "fsl,imx7ulp-lpuart";
};
-&adma_lpuart2 {
+&lpuart2 {
compatible = "fsl,imx8qxp-lpuart", "fsl,imx7ulp-lpuart";
};
-&adma_lpuart3 {
+&lpuart3 {
compatible = "fsl,imx8qxp-lpuart", "fsl,imx7ulp-lpuart";
};
-&adma_i2c0 {
+&i2c0 {
compatible = "fsl,imx8qxp-lpi2c", "fsl,imx7ulp-lpi2c";
};
-&adma_i2c1 {
+&i2c1 {
compatible = "fsl,imx8qxp-lpi2c", "fsl,imx7ulp-lpi2c";
};
-&adma_i2c2 {
+&i2c2 {
compatible = "fsl,imx8qxp-lpi2c", "fsl,imx7ulp-lpi2c";
};
-&adma_i2c3 {
+&i2c3 {
compatible = "fsl,imx8qxp-lpi2c", "fsl,imx7ulp-lpi2c";
};
diff --git a/arch/arm64/boot/dts/freescale/imx8qxp.dtsi b/arch/arm64/boot/dts/freescale/imx8qxp.dtsi
index 9513bb7b5c89..1e6b4995091e 100644
--- a/arch/arm64/boot/dts/freescale/imx8qxp.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8qxp.dtsi
@@ -30,10 +30,10 @@ aliases {
gpio5 = &lsio_gpio5;
gpio6 = &lsio_gpio6;
gpio7 = &lsio_gpio7;
- i2c0 = &adma_i2c0;
- i2c1 = &adma_i2c1;
- i2c2 = &adma_i2c2;
- i2c3 = &adma_i2c3;
+ i2c0 = &i2c0;
+ i2c1 = &i2c1;
+ i2c2 = &i2c2;
+ i2c3 = &i2c3;
mmc0 = &usdhc1;
mmc1 = &usdhc2;
mmc2 = &usdhc3;
@@ -42,10 +42,10 @@ aliases {
mu2 = &lsio_mu2;
mu3 = &lsio_mu3;
mu4 = &lsio_mu4;
- serial0 = &adma_lpuart0;
- serial1 = &adma_lpuart1;
- serial2 = &adma_lpuart2;
- serial3 = &adma_lpuart3;
+ serial0 = &lpuart0;
+ serial1 = &lpuart1;
+ serial2 = &lpuart2;
+ serial3 = &lpuart3;
};
cpus {
--
2.25.1
WARNING: multiple messages have this Message-ID (diff)
From: Dong Aisheng <aisheng.dong@nxp.com>
To: linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org
Cc: dongas86@gmail.com, kernel@pengutronix.de, shawnguo@kernel.org,
robh+dt@kernel.org, linux-imx@nxp.com, jan.kiszka@siemens.com,
Dong Aisheng <aisheng.dong@nxp.com>
Subject: [PATCH v5 13/18] arm64: dts: imx8: split adma ss into dma and audio ss
Date: Fri, 5 Mar 2021 21:17:43 +0800 [thread overview]
Message-ID: <1614950268-22073-15-git-send-email-aisheng.dong@nxp.com> (raw)
In-Reply-To: <1614950268-22073-1-git-send-email-aisheng.dong@nxp.com>
amda ss is consisted of dma and audio ss in qxp which are
also used in qm.
Let's split them into two ss for better code reuse.
Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>
---
ChangeLog:
v4->v5:
* no changes
v3->4:
* remove amda_* prefix for new boards colibri
v2->v3:
* use new clock-indices IDs
* remove ss prefix for adma
v1->v2:
* change to the new two cell scu clk binding
---
.../boot/dts/freescale/imx8-ss-adma.dtsi | 244 +-----------------
.../boot/dts/freescale/imx8-ss-audio.dtsi | 68 +++++
.../arm64/boot/dts/freescale/imx8-ss-dma.dtsi | 202 +++++++++++++++
.../boot/dts/freescale/imx8qxp-ai_ml.dts | 16 +-
.../freescale/imx8qxp-colibri-eval-v3.dtsi | 8 +-
.../boot/dts/freescale/imx8qxp-colibri.dtsi | 12 +-
arch/arm64/boot/dts/freescale/imx8qxp-mek.dts | 46 ++--
.../boot/dts/freescale/imx8qxp-ss-adma.dtsi | 16 +-
arch/arm64/boot/dts/freescale/imx8qxp.dtsi | 16 +-
9 files changed, 329 insertions(+), 299 deletions(-)
create mode 100644 arch/arm64/boot/dts/freescale/imx8-ss-audio.dtsi
create mode 100644 arch/arm64/boot/dts/freescale/imx8-ss-dma.dtsi
diff --git a/arch/arm64/boot/dts/freescale/imx8-ss-adma.dtsi b/arch/arm64/boot/dts/freescale/imx8-ss-adma.dtsi
index ff0696d80654..9386d1a59e82 100644
--- a/arch/arm64/boot/dts/freescale/imx8-ss-adma.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8-ss-adma.dtsi
@@ -4,245 +4,5 @@
* Dong Aisheng <aisheng.dong@nxp.com>
*/
-#include <dt-bindings/clock/imx8-lpcg.h>
-#include <dt-bindings/firmware/imx/rsrc.h>
-
-adma_subsys: bus@59000000 {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0x59000000 0x0 0x59000000 0x2000000>;
-
- dma_ipg_clk: clock-dma-ipg {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <120000000>;
- clock-output-names = "dma_ipg_clk";
- };
-
- dsp_lpcg: clock-controller@59580000 {
- compatible = "fsl,imx8qxp-lpcg";
- reg = <0x59580000 0x10000>;
- #clock-cells = <1>;
- clocks = <&dma_ipg_clk>,
- <&dma_ipg_clk>,
- <&dma_ipg_clk>;
- clock-indices = <IMX_LPCG_CLK_4>, <IMX_LPCG_CLK_5>,
- <IMX_LPCG_CLK_7>;
- clock-output-names = "dsp_lpcg_adb_clk",
- "dsp_lpcg_ipg_clk",
- "dsp_lpcg_core_clk";
- power-domains = <&pd IMX_SC_R_DSP>;
- };
-
- dsp_ram_lpcg: clock-controller@59590000 {
- compatible = "fsl,imx8qxp-lpcg";
- reg = <0x59590000 0x10000>;
- #clock-cells = <1>;
- clocks = <&dma_ipg_clk>;
- clock-indices = <IMX_LPCG_CLK_4>;
- clock-output-names = "dsp_ram_lpcg_ipg_clk";
- power-domains = <&pd IMX_SC_R_DSP_RAM>;
- };
-
- adma_dsp: dsp@596e8000 {
- compatible = "fsl,imx8qxp-dsp";
- reg = <0x596e8000 0x88000>;
- clocks = <&dsp_lpcg IMX_LPCG_CLK_5>,
- <&dsp_ram_lpcg IMX_LPCG_CLK_4>,
- <&dsp_lpcg IMX_LPCG_CLK_7>;
- clock-names = "ipg", "ocram", "core";
- power-domains = <&pd IMX_SC_R_MU_13A>,
- <&pd IMX_SC_R_MU_13B>,
- <&pd IMX_SC_R_DSP>,
- <&pd IMX_SC_R_DSP_RAM>;
- mbox-names = "txdb0", "txdb1",
- "rxdb0", "rxdb1";
- mboxes = <&lsio_mu13 2 0>,
- <&lsio_mu13 2 1>,
- <&lsio_mu13 3 0>,
- <&lsio_mu13 3 1>;
- memory-region = <&dsp_reserved>;
- status = "disabled";
- };
-
- adma_lpuart0: serial@5a060000 {
- reg = <0x5a060000 0x1000>;
- interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&uart0_lpcg IMX_LPCG_CLK_4>,
- <&uart0_lpcg IMX_LPCG_CLK_0>;
- clock-names = "ipg", "baud";
- power-domains = <&pd IMX_SC_R_UART_0>;
- status = "disabled";
- };
-
- adma_lpuart1: serial@5a070000 {
- reg = <0x5a070000 0x1000>;
- interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&uart1_lpcg IMX_LPCG_CLK_4>,
- <&uart1_lpcg IMX_LPCG_CLK_0>;
- clock-names = "ipg", "baud";
- power-domains = <&pd IMX_SC_R_UART_1>;
- status = "disabled";
- };
-
- adma_lpuart2: serial@5a080000 {
- reg = <0x5a080000 0x1000>;
- interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&uart2_lpcg IMX_LPCG_CLK_4>,
- <&uart2_lpcg IMX_LPCG_CLK_0>;
- clock-names = "ipg", "baud";
- power-domains = <&pd IMX_SC_R_UART_2>;
- status = "disabled";
- };
-
- adma_lpuart3: serial@5a090000 {
- reg = <0x5a090000 0x1000>;
- interrupts = <GIC_SPI 228 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&uart3_lpcg IMX_LPCG_CLK_4>,
- <&uart3_lpcg IMX_LPCG_CLK_0>;
- clock-names = "ipg", "baud";
- power-domains = <&pd IMX_SC_R_UART_3>;
- status = "disabled";
- };
-
- uart0_lpcg: clock-controller@5a460000 {
- compatible = "fsl,imx8qxp-lpcg";
- reg = <0x5a460000 0x10000>;
- #clock-cells = <1>;
- clocks = <&clk IMX_SC_R_UART_0 IMX_SC_PM_CLK_PER>,
- <&dma_ipg_clk>;
- clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>;
- clock-output-names = "uart0_lpcg_baud_clk",
- "uart0_lpcg_ipg_clk";
- power-domains = <&pd IMX_SC_R_UART_0>;
- };
-
- uart1_lpcg: clock-controller@5a470000 {
- compatible = "fsl,imx8qxp-lpcg";
- reg = <0x5a470000 0x10000>;
- #clock-cells = <1>;
- clocks = <&clk IMX_SC_R_UART_1 IMX_SC_PM_CLK_PER>,
- <&dma_ipg_clk>;
- clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>;
- clock-output-names = "uart1_lpcg_baud_clk",
- "uart1_lpcg_ipg_clk";
- power-domains = <&pd IMX_SC_R_UART_1>;
- };
-
- uart2_lpcg: clock-controller@5a480000 {
- compatible = "fsl,imx8qxp-lpcg";
- reg = <0x5a480000 0x10000>;
- #clock-cells = <1>;
- clocks = <&clk IMX_SC_R_UART_2 IMX_SC_PM_CLK_PER>,
- <&dma_ipg_clk>;
- clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>;
- clock-output-names = "uart2_lpcg_baud_clk",
- "uart2_lpcg_ipg_clk";
- power-domains = <&pd IMX_SC_R_UART_2>;
- };
-
- uart3_lpcg: clock-controller@5a490000 {
- compatible = "fsl,imx8qxp-lpcg";
- reg = <0x5a490000 0x10000>;
- #clock-cells = <1>;
- clocks = <&clk IMX_SC_R_UART_3 IMX_SC_PM_CLK_PER>,
- <&dma_ipg_clk>;
- clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>;
- clock-output-names = "uart3_lpcg_baud_clk",
- "uart3_lpcg_ipg_clk";
- power-domains = <&pd IMX_SC_R_UART_3>;
- };
-
- adma_i2c0: i2c@5a800000 {
- reg = <0x5a800000 0x4000>;
- interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&i2c0_lpcg IMX_LPCG_CLK_0>;
- clock-names = "per";
- assigned-clocks = <&clk IMX_SC_R_I2C_0 IMX_SC_PM_CLK_PER>;
- assigned-clock-rates = <24000000>;
- power-domains = <&pd IMX_SC_R_I2C_0>;
- status = "disabled";
- };
-
- adma_i2c1: i2c@5a810000 {
- reg = <0x5a810000 0x4000>;
- interrupts = <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&i2c1_lpcg IMX_LPCG_CLK_0>;
- clock-names = "per";
- assigned-clocks = <&clk IMX_SC_R_I2C_1 IMX_SC_PM_CLK_PER>;
- assigned-clock-rates = <24000000>;
- power-domains = <&pd IMX_SC_R_I2C_1>;
- status = "disabled";
- };
-
- adma_i2c2: i2c@5a820000 {
- reg = <0x5a820000 0x4000>;
- interrupts = <GIC_SPI 222 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&i2c2_lpcg IMX_LPCG_CLK_0>;
- clock-names = "per";
- assigned-clocks = <&clk IMX_SC_R_I2C_2 IMX_SC_PM_CLK_PER>;
- assigned-clock-rates = <24000000>;
- power-domains = <&pd IMX_SC_R_I2C_2>;
- status = "disabled";
- };
-
- adma_i2c3: i2c@5a830000 {
- reg = <0x5a830000 0x4000>;
- interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&i2c3_lpcg IMX_LPCG_CLK_0>;
- clock-names = "per";
- assigned-clocks = <&clk IMX_SC_R_I2C_3 IMX_SC_PM_CLK_PER>;
- assigned-clock-rates = <24000000>;
- power-domains = <&pd IMX_SC_R_I2C_3>;
- status = "disabled";
- };
-
- i2c0_lpcg: clock-controller@5ac00000 {
- compatible = "fsl,imx8qxp-lpcg";
- reg = <0x5ac00000 0x10000>;
- #clock-cells = <1>;
- clocks = <&clk IMX_SC_R_I2C_0 IMX_SC_PM_CLK_PER>,
- <&dma_ipg_clk>;
- clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>;
- clock-output-names = "i2c0_lpcg_clk",
- "i2c0_lpcg_ipg_clk";
- power-domains = <&pd IMX_SC_R_I2C_0>;
- };
-
- i2c1_lpcg: clock-controller@5ac10000 {
- compatible = "fsl,imx8qxp-lpcg";
- reg = <0x5ac10000 0x10000>;
- #clock-cells = <1>;
- clocks = <&clk IMX_SC_R_I2C_1 IMX_SC_PM_CLK_PER>,
- <&dma_ipg_clk>;
- clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>;
- clock-output-names = "i2c1_lpcg_clk",
- "i2c1_lpcg_ipg_clk";
- power-domains = <&pd IMX_SC_R_I2C_1>;
- };
-
- i2c2_lpcg: clock-controller@5ac20000 {
- compatible = "fsl,imx8qxp-lpcg";
- reg = <0x5ac20000 0x10000>;
- #clock-cells = <1>;
- clocks = <&clk IMX_SC_R_I2C_2 IMX_SC_PM_CLK_PER>,
- <&dma_ipg_clk>;
- clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>;
- clock-output-names = "i2c2_lpcg_clk",
- "i2c2_lpcg_ipg_clk";
- power-domains = <&pd IMX_SC_R_I2C_2>;
- };
-
- i2c3_lpcg: clock-controller@5ac30000 {
- compatible = "fsl,imx8qxp-lpcg";
- reg = <0x5ac30000 0x10000>;
- #clock-cells = <1>;
- clocks = <&clk IMX_SC_R_I2C_3 IMX_SC_PM_CLK_PER>,
- <&dma_ipg_clk>;
- clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>;
- clock-output-names = "i2c3_lpcg_clk",
- "i2c3_lpcg_ipg_clk";
- power-domains = <&pd IMX_SC_R_I2C_3>;
- };
-};
+#include "imx8-ss-audio.dtsi"
+#include "imx8-ss-dma.dtsi"
diff --git a/arch/arm64/boot/dts/freescale/imx8-ss-audio.dtsi b/arch/arm64/boot/dts/freescale/imx8-ss-audio.dtsi
new file mode 100644
index 000000000000..6c8d75ef9250
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8-ss-audio.dtsi
@@ -0,0 +1,68 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2018-2019 NXP
+ * Dong Aisheng <aisheng.dong@nxp.com>
+ */
+
+#include <dt-bindings/clock/imx8-lpcg.h>
+#include <dt-bindings/firmware/imx/rsrc.h>
+
+audio_subsys: bus@59000000 {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x59000000 0x0 0x59000000 0x1000000>;
+
+ audio_ipg_clk: clock-audio-ipg {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <120000000>;
+ clock-output-names = "audio_ipg_clk";
+ };
+
+ dsp_lpcg: clock-controller@59580000 {
+ compatible = "fsl,imx8qxp-lpcg";
+ reg = <0x59580000 0x10000>;
+ #clock-cells = <1>;
+ clocks = <&audio_ipg_clk>,
+ <&audio_ipg_clk>,
+ <&audio_ipg_clk>;
+ clock-indices = <IMX_LPCG_CLK_4>, <IMX_LPCG_CLK_5>,
+ <IMX_LPCG_CLK_7>;
+ clock-output-names = "dsp_lpcg_adb_clk",
+ "dsp_lpcg_ipg_clk",
+ "dsp_lpcg_core_clk";
+ power-domains = <&pd IMX_SC_R_DSP>;
+ };
+
+ dsp_ram_lpcg: clock-controller@59590000 {
+ compatible = "fsl,imx8qxp-lpcg";
+ reg = <0x59590000 0x10000>;
+ #clock-cells = <1>;
+ clocks = <&audio_ipg_clk>;
+ clock-indices = <IMX_LPCG_CLK_4>;
+ clock-output-names = "dsp_ram_lpcg_ipg_clk";
+ power-domains = <&pd IMX_SC_R_DSP_RAM>;
+ };
+
+ dsp: dsp@596e8000 {
+ compatible = "fsl,imx8qxp-dsp";
+ reg = <0x596e8000 0x88000>;
+ clocks = <&dsp_lpcg IMX_LPCG_CLK_5>,
+ <&dsp_ram_lpcg IMX_LPCG_CLK_4>,
+ <&dsp_lpcg IMX_LPCG_CLK_7>;
+ clock-names = "ipg", "ocram", "core";
+ power-domains = <&pd IMX_SC_R_MU_13A>,
+ <&pd IMX_SC_R_MU_13B>,
+ <&pd IMX_SC_R_DSP>,
+ <&pd IMX_SC_R_DSP_RAM>;
+ mbox-names = "txdb0", "txdb1",
+ "rxdb0", "rxdb1";
+ mboxes = <&lsio_mu13 2 0>,
+ <&lsio_mu13 2 1>,
+ <&lsio_mu13 3 0>,
+ <&lsio_mu13 3 1>;
+ memory-region = <&dsp_reserved>;
+ status = "disabled";
+ };
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8-ss-dma.dtsi b/arch/arm64/boot/dts/freescale/imx8-ss-dma.dtsi
new file mode 100644
index 000000000000..960a802b8b6e
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8-ss-dma.dtsi
@@ -0,0 +1,202 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2018-2019 NXP
+ * Dong Aisheng <aisheng.dong@nxp.com>
+ */
+
+#include <dt-bindings/clock/imx8-lpcg.h>
+#include <dt-bindings/firmware/imx/rsrc.h>
+
+dma_subsys: bus@5a000000 {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x5a000000 0x0 0x5a000000 0x1000000>;
+
+ dma_ipg_clk: clock-dma-ipg {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <120000000>;
+ clock-output-names = "dma_ipg_clk";
+ };
+
+ lpuart0: serial@5a060000 {
+ reg = <0x5a060000 0x1000>;
+ interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&uart0_lpcg IMX_LPCG_CLK_4>,
+ <&uart0_lpcg IMX_LPCG_CLK_0>;
+ clock-names = "ipg", "baud";
+ power-domains = <&pd IMX_SC_R_UART_0>;
+ status = "disabled";
+ };
+
+ lpuart1: serial@5a070000 {
+ reg = <0x5a070000 0x1000>;
+ interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&uart1_lpcg IMX_LPCG_CLK_4>,
+ <&uart1_lpcg IMX_LPCG_CLK_0>;
+ clock-names = "ipg", "baud";
+ power-domains = <&pd IMX_SC_R_UART_1>;
+ status = "disabled";
+ };
+
+ lpuart2: serial@5a080000 {
+ reg = <0x5a080000 0x1000>;
+ interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&uart2_lpcg IMX_LPCG_CLK_4>,
+ <&uart2_lpcg IMX_LPCG_CLK_0>;
+ clock-names = "ipg", "baud";
+ power-domains = <&pd IMX_SC_R_UART_2>;
+ status = "disabled";
+ };
+
+ lpuart3: serial@5a090000 {
+ reg = <0x5a090000 0x1000>;
+ interrupts = <GIC_SPI 228 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&uart3_lpcg IMX_LPCG_CLK_4>,
+ <&uart3_lpcg IMX_LPCG_CLK_0>;
+ clock-names = "ipg", "baud";
+ power-domains = <&pd IMX_SC_R_UART_3>;
+ status = "disabled";
+ };
+
+ uart0_lpcg: clock-controller@5a460000 {
+ compatible = "fsl,imx8qxp-lpcg";
+ reg = <0x5a460000 0x10000>;
+ #clock-cells = <1>;
+ clocks = <&clk IMX_SC_R_UART_0 IMX_SC_PM_CLK_PER>,
+ <&dma_ipg_clk>;
+ clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>;
+ clock-output-names = "uart0_lpcg_baud_clk",
+ "uart0_lpcg_ipg_clk";
+ power-domains = <&pd IMX_SC_R_UART_0>;
+ };
+
+ uart1_lpcg: clock-controller@5a470000 {
+ compatible = "fsl,imx8qxp-lpcg";
+ reg = <0x5a470000 0x10000>;
+ #clock-cells = <1>;
+ clocks = <&clk IMX_SC_R_UART_1 IMX_SC_PM_CLK_PER>,
+ <&dma_ipg_clk>;
+ clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>;
+ clock-output-names = "uart1_lpcg_baud_clk",
+ "uart1_lpcg_ipg_clk";
+ power-domains = <&pd IMX_SC_R_UART_1>;
+ };
+
+ uart2_lpcg: clock-controller@5a480000 {
+ compatible = "fsl,imx8qxp-lpcg";
+ reg = <0x5a480000 0x10000>;
+ #clock-cells = <1>;
+ clocks = <&clk IMX_SC_R_UART_2 IMX_SC_PM_CLK_PER>,
+ <&dma_ipg_clk>;
+ clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>;
+ clock-output-names = "uart2_lpcg_baud_clk",
+ "uart2_lpcg_ipg_clk";
+ power-domains = <&pd IMX_SC_R_UART_2>;
+ };
+
+ uart3_lpcg: clock-controller@5a490000 {
+ compatible = "fsl,imx8qxp-lpcg";
+ reg = <0x5a490000 0x10000>;
+ #clock-cells = <1>;
+ clocks = <&clk IMX_SC_R_UART_3 IMX_SC_PM_CLK_PER>,
+ <&dma_ipg_clk>;
+ clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>;
+ clock-output-names = "uart3_lpcg_baud_clk",
+ "uart3_lpcg_ipg_clk";
+ power-domains = <&pd IMX_SC_R_UART_3>;
+ };
+
+ i2c0: i2c@5a800000 {
+ reg = <0x5a800000 0x4000>;
+ interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&i2c0_lpcg IMX_LPCG_CLK_0>;
+ clock-names = "per";
+ assigned-clocks = <&clk IMX_SC_R_I2C_0 IMX_SC_PM_CLK_PER>;
+ assigned-clock-rates = <24000000>;
+ power-domains = <&pd IMX_SC_R_I2C_0>;
+ status = "disabled";
+ };
+
+ i2c1: i2c@5a810000 {
+ reg = <0x5a810000 0x4000>;
+ interrupts = <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&i2c1_lpcg IMX_LPCG_CLK_0>;
+ clock-names = "per";
+ assigned-clocks = <&clk IMX_SC_R_I2C_1 IMX_SC_PM_CLK_PER>;
+ assigned-clock-rates = <24000000>;
+ power-domains = <&pd IMX_SC_R_I2C_1>;
+ status = "disabled";
+ };
+
+ i2c2: i2c@5a820000 {
+ reg = <0x5a820000 0x4000>;
+ interrupts = <GIC_SPI 222 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&i2c2_lpcg IMX_LPCG_CLK_0>;
+ clock-names = "per";
+ assigned-clocks = <&clk IMX_SC_R_I2C_2 IMX_SC_PM_CLK_PER>;
+ assigned-clock-rates = <24000000>;
+ power-domains = <&pd IMX_SC_R_I2C_2>;
+ status = "disabled";
+ };
+
+ i2c3: i2c@5a830000 {
+ reg = <0x5a830000 0x4000>;
+ interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&i2c3_lpcg IMX_LPCG_CLK_0>;
+ clock-names = "per";
+ assigned-clocks = <&clk IMX_SC_R_I2C_3 IMX_SC_PM_CLK_PER>;
+ assigned-clock-rates = <24000000>;
+ power-domains = <&pd IMX_SC_R_I2C_3>;
+ status = "disabled";
+ };
+
+ i2c0_lpcg: clock-controller@5ac00000 {
+ compatible = "fsl,imx8qxp-lpcg";
+ reg = <0x5ac00000 0x10000>;
+ #clock-cells = <1>;
+ clocks = <&clk IMX_SC_R_I2C_0 IMX_SC_PM_CLK_PER>,
+ <&dma_ipg_clk>;
+ clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>;
+ clock-output-names = "i2c0_lpcg_clk",
+ "i2c0_lpcg_ipg_clk";
+ power-domains = <&pd IMX_SC_R_I2C_0>;
+ };
+
+ i2c1_lpcg: clock-controller@5ac10000 {
+ compatible = "fsl,imx8qxp-lpcg";
+ reg = <0x5ac10000 0x10000>;
+ #clock-cells = <1>;
+ clocks = <&clk IMX_SC_R_I2C_1 IMX_SC_PM_CLK_PER>,
+ <&dma_ipg_clk>;
+ clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>;
+ clock-output-names = "i2c1_lpcg_clk",
+ "i2c1_lpcg_ipg_clk";
+ power-domains = <&pd IMX_SC_R_I2C_1>;
+ };
+
+ i2c2_lpcg: clock-controller@5ac20000 {
+ compatible = "fsl,imx8qxp-lpcg";
+ reg = <0x5ac20000 0x10000>;
+ #clock-cells = <1>;
+ clocks = <&clk IMX_SC_R_I2C_2 IMX_SC_PM_CLK_PER>,
+ <&dma_ipg_clk>;
+ clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>;
+ clock-output-names = "i2c2_lpcg_clk",
+ "i2c2_lpcg_ipg_clk";
+ power-domains = <&pd IMX_SC_R_I2C_2>;
+ };
+
+ i2c3_lpcg: clock-controller@5ac30000 {
+ compatible = "fsl,imx8qxp-lpcg";
+ reg = <0x5ac30000 0x10000>;
+ #clock-cells = <1>;
+ clocks = <&clk IMX_SC_R_I2C_3 IMX_SC_PM_CLK_PER>,
+ <&dma_ipg_clk>;
+ clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>;
+ clock-output-names = "i2c3_lpcg_clk",
+ "i2c3_lpcg_ipg_clk";
+ power-domains = <&pd IMX_SC_R_I2C_3>;
+ };
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8qxp-ai_ml.dts b/arch/arm64/boot/dts/freescale/imx8qxp-ai_ml.dts
index b5352706e3f0..47bb68823b24 100644
--- a/arch/arm64/boot/dts/freescale/imx8qxp-ai_ml.dts
+++ b/arch/arm64/boot/dts/freescale/imx8qxp-ai_ml.dts
@@ -13,13 +13,13 @@ / {
compatible = "einfochips,imx8qxp-ai_ml", "fsl,imx8qxp";
aliases {
- serial1 = &adma_lpuart1;
- serial2 = &adma_lpuart2;
- serial3 = &adma_lpuart3;
+ serial1 = &lpuart1;
+ serial2 = &lpuart2;
+ serial3 = &lpuart3;
};
chosen {
- stdout-path = &adma_lpuart2;
+ stdout-path = &lpuart2;
};
memory@80000000 {
@@ -82,7 +82,7 @@ sdio_pwrseq: sdio-pwrseq {
};
/* BT */
-&adma_lpuart0 {
+&lpuart0 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_lpuart0>;
uart-has-rtscts;
@@ -90,21 +90,21 @@ &adma_lpuart0 {
};
/* LS-UART0 */
-&adma_lpuart1 {
+&lpuart1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_lpuart1>;
status = "okay";
};
/* Debug */
-&adma_lpuart2 {
+&lpuart2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_lpuart2>;
status = "okay";
};
/* PCI-E UART */
-&adma_lpuart3 {
+&lpuart3 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_lpuart3>;
status = "okay";
diff --git a/arch/arm64/boot/dts/freescale/imx8qxp-colibri-eval-v3.dtsi b/arch/arm64/boot/dts/freescale/imx8qxp-colibri-eval-v3.dtsi
index c7336f387605..144fc9e82da7 100644
--- a/arch/arm64/boot/dts/freescale/imx8qxp-colibri-eval-v3.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8qxp-colibri-eval-v3.dtsi
@@ -26,7 +26,7 @@ wakeup {
};
};
-&adma_i2c1 {
+&i2c1 {
status = "okay";
/* M41T0M6 real time clock on carrier board */
@@ -37,17 +37,17 @@ rtc_i2c: rtc@68 {
};
/* Colibri UART_B */
-&adma_lpuart0 {
+&lpuart0 {
status= "okay";
};
/* Colibri UART_C */
-&adma_lpuart2 {
+&lpuart2 {
status= "okay";
};
/* Colibri UART_A */
-&adma_lpuart3 {
+&lpuart3 {
status= "okay";
};
diff --git a/arch/arm64/boot/dts/freescale/imx8qxp-colibri.dtsi b/arch/arm64/boot/dts/freescale/imx8qxp-colibri.dtsi
index f38acff0d25c..89d70e030433 100644
--- a/arch/arm64/boot/dts/freescale/imx8qxp-colibri.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8qxp-colibri.dtsi
@@ -10,7 +10,7 @@ / {
compatible = "toradex,colibri-imx8x", "fsl,imx8qxp";
chosen {
- stdout-path = &adma_lpuart3;
+ stdout-path = &lpuart3;
};
reg_module_3v3: regulator-module-3v3 {
@@ -22,7 +22,7 @@ reg_module_3v3: regulator-module-3v3 {
};
/* On-module I2C */
-&adma_i2c0 {
+&i2c0 {
#address-cells = <1>;
#size-cells = <0>;
clock-frequency = <100000>;
@@ -49,7 +49,7 @@ touchscreen@2c {
};
/* Colibri I2C */
-&adma_i2c1 {
+&i2c1 {
#address-cells = <1>;
#size-cells = <0>;
clock-frequency = <100000>;
@@ -58,19 +58,19 @@ &adma_i2c1 {
};
/* Colibri UART_B */
-&adma_lpuart0 {
+&lpuart0 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_lpuart0>;
};
/* Colibri UART_C */
-&adma_lpuart2 {
+&lpuart2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_lpuart2>;
};
/* Colibri UART_A */
-&adma_lpuart3 {
+&lpuart3 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_lpuart3>, <&pinctrl_lpuart3_ctrl>;
};
diff --git a/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts b/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts
index c40bbb313b78..863232a47004 100644
--- a/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts
+++ b/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts
@@ -12,7 +12,7 @@ / {
compatible = "fsl,imx8qxp-mek", "fsl,imx8qxp";
chosen {
- stdout-path = &adma_lpuart0;
+ stdout-path = &lpuart0;
};
memory@80000000 {
@@ -30,11 +30,30 @@ reg_usdhc2_vmmc: usdhc2-vmmc {
};
};
-&adma_dsp {
+&dsp {
status = "okay";
};
-&adma_i2c1 {
+&fec1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_fec1>;
+ phy-mode = "rgmii-id";
+ phy-handle = <ðphy0>;
+ fsl,magic-packet;
+ status = "okay";
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ethphy0: ethernet-phy@0 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <0>;
+ };
+ };
+};
+
+&i2c1 {
#address-cells = <1>;
#size-cells = <0>;
clock-frequency = <100000>;
@@ -110,31 +129,12 @@ light-sensor@44 {
};
};
-&adma_lpuart0 {
+&lpuart0 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_lpuart0>;
status = "okay";
};
-&fec1 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_fec1>;
- phy-mode = "rgmii-id";
- phy-handle = <ðphy0>;
- fsl,magic-packet;
- status = "okay";
-
- mdio {
- #address-cells = <1>;
- #size-cells = <0>;
-
- ethphy0: ethernet-phy@0 {
- compatible = "ethernet-phy-ieee802.3-c22";
- reg = <0>;
- };
- };
-};
-
&scu_key {
status = "okay";
};
diff --git a/arch/arm64/boot/dts/freescale/imx8qxp-ss-adma.dtsi b/arch/arm64/boot/dts/freescale/imx8qxp-ss-adma.dtsi
index 3dc3238e7ca6..dc1daa8dc72f 100644
--- a/arch/arm64/boot/dts/freescale/imx8qxp-ss-adma.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8qxp-ss-adma.dtsi
@@ -4,34 +4,34 @@
* Dong Aisheng <aisheng.dong@nxp.com>
*/
-&adma_lpuart0 {
+&lpuart0 {
compatible = "fsl,imx8qxp-lpuart", "fsl,imx7ulp-lpuart";
};
-&adma_lpuart1 {
+&lpuart1 {
compatible = "fsl,imx8qxp-lpuart", "fsl,imx7ulp-lpuart";
};
-&adma_lpuart2 {
+&lpuart2 {
compatible = "fsl,imx8qxp-lpuart", "fsl,imx7ulp-lpuart";
};
-&adma_lpuart3 {
+&lpuart3 {
compatible = "fsl,imx8qxp-lpuart", "fsl,imx7ulp-lpuart";
};
-&adma_i2c0 {
+&i2c0 {
compatible = "fsl,imx8qxp-lpi2c", "fsl,imx7ulp-lpi2c";
};
-&adma_i2c1 {
+&i2c1 {
compatible = "fsl,imx8qxp-lpi2c", "fsl,imx7ulp-lpi2c";
};
-&adma_i2c2 {
+&i2c2 {
compatible = "fsl,imx8qxp-lpi2c", "fsl,imx7ulp-lpi2c";
};
-&adma_i2c3 {
+&i2c3 {
compatible = "fsl,imx8qxp-lpi2c", "fsl,imx7ulp-lpi2c";
};
diff --git a/arch/arm64/boot/dts/freescale/imx8qxp.dtsi b/arch/arm64/boot/dts/freescale/imx8qxp.dtsi
index 9513bb7b5c89..1e6b4995091e 100644
--- a/arch/arm64/boot/dts/freescale/imx8qxp.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8qxp.dtsi
@@ -30,10 +30,10 @@ aliases {
gpio5 = &lsio_gpio5;
gpio6 = &lsio_gpio6;
gpio7 = &lsio_gpio7;
- i2c0 = &adma_i2c0;
- i2c1 = &adma_i2c1;
- i2c2 = &adma_i2c2;
- i2c3 = &adma_i2c3;
+ i2c0 = &i2c0;
+ i2c1 = &i2c1;
+ i2c2 = &i2c2;
+ i2c3 = &i2c3;
mmc0 = &usdhc1;
mmc1 = &usdhc2;
mmc2 = &usdhc3;
@@ -42,10 +42,10 @@ aliases {
mu2 = &lsio_mu2;
mu3 = &lsio_mu3;
mu4 = &lsio_mu4;
- serial0 = &adma_lpuart0;
- serial1 = &adma_lpuart1;
- serial2 = &adma_lpuart2;
- serial3 = &adma_lpuart3;
+ serial0 = &lpuart0;
+ serial1 = &lpuart1;
+ serial2 = &lpuart2;
+ serial3 = &lpuart3;
};
cpus {
--
2.25.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2021-03-05 13:31 UTC|newest]
Thread overview: 54+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-03-05 13:17 [PATCH v5 00/18] arm64: dts: imx8: architecture improvement and adding imx8qm support Dong Aisheng
2021-03-05 13:17 ` Dong Aisheng
2021-03-05 13:17 ` [PATCH v5 01/18] dt-bindings: arm: fsl: add imx8qm boards compatible string Dong Aisheng
2021-03-05 13:17 ` Dong Aisheng
2021-03-08 1:40 ` Shawn Guo
2021-03-08 1:40 ` Shawn Guo
2021-03-05 13:17 ` [PATCH 1/1] firmware: imx: scu-pd: do not power off console domain Dong Aisheng
2021-03-05 13:17 ` Dong Aisheng
2021-03-05 13:33 ` Aisheng Dong
2021-03-05 13:33 ` Aisheng Dong
2021-03-05 13:17 ` [PATCH v5 02/18] dt-bindings: mailbox: mu: add imx8qm support Dong Aisheng
2021-03-05 13:17 ` Dong Aisheng
2021-03-08 1:40 ` Shawn Guo
2021-03-08 1:40 ` Shawn Guo
2021-03-05 13:17 ` [PATCH v5 03/18] arm64: dts: imx8qxp: add fallback compatible string for scu pd Dong Aisheng
2021-03-05 13:17 ` Dong Aisheng
2021-03-05 13:17 ` [PATCH v5 04/18] arm64: dts: imx8qxp: move scu pd node before scu clock node Dong Aisheng
2021-03-05 13:17 ` Dong Aisheng
2021-03-05 13:17 ` [PATCH v5 05/18] arm64: dts: imx8qxp: orginize dts in subsystems Dong Aisheng
2021-03-05 13:17 ` Dong Aisheng
2021-03-05 13:17 ` [PATCH v5 06/18] arm64: dts: imx8: add lsio lpcg clocks Dong Aisheng
2021-03-05 13:17 ` Dong Aisheng
2021-03-05 13:17 ` [PATCH v5 07/18] arm64: dts: imx8: add conn " Dong Aisheng
2021-03-05 13:17 ` Dong Aisheng
2021-03-05 13:17 ` [PATCH v5 08/18] arm64: dts: imx8: add adma " Dong Aisheng
2021-03-05 13:17 ` Dong Aisheng
2021-03-05 13:17 ` [PATCH v5 09/18] arm64: dts: imx8: switch to two cell scu clock binding Dong Aisheng
2021-03-05 13:17 ` Dong Aisheng
2021-03-05 13:17 ` [PATCH v5 10/18] arm64: dts: imx8: switch to new lpcg " Dong Aisheng
2021-03-05 13:17 ` Dong Aisheng
2021-03-05 13:17 ` [PATCH v5 11/18] arm64: dts: imx8qm: add lsio ss support Dong Aisheng
2021-03-05 13:17 ` Dong Aisheng
2021-03-05 13:17 ` [PATCH v5 12/18] arm64: dts: imx8qm: add conn " Dong Aisheng
2021-03-05 13:17 ` Dong Aisheng
2021-03-05 13:17 ` Dong Aisheng [this message]
2021-03-05 13:17 ` [PATCH v5 13/18] arm64: dts: imx8: split adma ss into dma and audio ss Dong Aisheng
2021-03-05 13:17 ` [PATCH v5 14/18] arm64: dts: imx8qm: add dma ss support Dong Aisheng
2021-03-05 13:17 ` Dong Aisheng
2021-03-05 13:17 ` [PATCH v5 15/18] arm64: dts: imx: add imx8qm common dts file Dong Aisheng
2021-03-05 13:17 ` Dong Aisheng
2021-03-05 13:17 ` [PATCH v5 16/18] arm64: dts: imx: add imx8qm mek support Dong Aisheng
2021-03-05 13:17 ` Dong Aisheng
2021-03-05 13:17 ` [PATCH v5 17/18] arm64: defconfig: " Dong Aisheng
2021-03-05 13:17 ` Dong Aisheng
2021-03-08 1:44 ` Shawn Guo
2021-03-08 1:44 ` Shawn Guo
2021-03-05 13:17 ` [PATCH v5 18/18] firmware: imx: scu-pd: do not power off console domain Dong Aisheng
2021-03-05 13:17 ` Dong Aisheng
2021-03-08 1:45 ` Shawn Guo
2021-03-08 1:45 ` Shawn Guo
2021-03-08 1:59 ` [PATCH v5 00/18] arm64: dts: imx8: architecture improvement and adding imx8qm support Shawn Guo
2021-03-08 1:59 ` Shawn Guo
2021-03-08 2:29 ` Aisheng Dong
2021-03-08 2:29 ` Aisheng Dong
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1614950268-22073-15-git-send-email-aisheng.dong@nxp.com \
--to=aisheng.dong@nxp.com \
--cc=devicetree@vger.kernel.org \
--cc=dongas86@gmail.com \
--cc=jan.kiszka@siemens.com \
--cc=kernel@pengutronix.de \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-imx@nxp.com \
--cc=robh+dt@kernel.org \
--cc=shawnguo@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.