From: Dong Aisheng <aisheng.dong@nxp.com>
To: linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org
Cc: dongas86@gmail.com, kernel@pengutronix.de, shawnguo@kernel.org,
robh+dt@kernel.org, linux-imx@nxp.com, jan.kiszka@siemens.com,
Dong Aisheng <aisheng.dong@nxp.com>,
Mark Rutland <mark.rutland@arm.com>,
Fabio Estevam <fabio.estevam@nxp.com>
Subject: [PATCH v5 06/18] arm64: dts: imx8: add lsio lpcg clocks
Date: Fri, 5 Mar 2021 21:17:36 +0800 [thread overview]
Message-ID: <1614950268-22073-8-git-send-email-aisheng.dong@nxp.com> (raw)
In-Reply-To: <1614950268-22073-1-git-send-email-aisheng.dong@nxp.com>
Add lsio lpcg clocks
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: devicetree@vger.kernel.org
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Sascha Hauer <kernel@pengutronix.de>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>
---
ChangeLog:
v4->v5:
* no changes
v2->v4:
* update to use clock-indices property instead of bit-offset property
v1->v2:
* Use old SCU clock binding temporarily to avoid build warning due to SCU
clock cell will be changed to 2.
* add power domain property
---
.../boot/dts/freescale/imx8-ss-lsio.dtsi | 156 +++++++++++++++++-
1 file changed, 155 insertions(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/freescale/imx8-ss-lsio.dtsi b/arch/arm64/boot/dts/freescale/imx8-ss-lsio.dtsi
index 70902f56cdb1..babe6c3e2c76 100644
--- a/arch/arm64/boot/dts/freescale/imx8-ss-lsio.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8-ss-lsio.dtsi
@@ -4,12 +4,29 @@
* Dong Aisheng <aisheng.dong@nxp.com>
*/
+#include <dt-bindings/clock/imx8-lpcg.h>
+#include <dt-bindings/firmware/imx/rsrc.h>
+
lsio_subsys: bus@5d000000 {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x5d000000 0x0 0x5d000000 0x1000000>;
+ lsio_mem_clk: clock-lsio-mem {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <200000000>;
+ clock-output-names = "lsio_mem_clk";
+ };
+
+ lsio_bus_clk: clock-lsio-bus {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <100000000>;
+ clock-output-names = "lsio_bus_clk";
+ };
+
lsio_gpio0: gpio@5d080000 {
reg = <0x5d080000 0x10000>;
interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>;
@@ -131,8 +148,145 @@ lsio_mu13: mailbox@5d280000 {
power-domains = <&pd IMX_SC_R_MU_13A>;
};
- lsio_lpcg: clock-controller@5d400000 {
+ /* LPCG clocks */
+ lsio_lpcg: clock-controller-legacy@5d400000 {
reg = <0x5d400000 0x400000>;
#clock-cells = <1>;
};
+
+ pwm0_lpcg: clock-controller@5d400000 {
+ reg = <0x5d400000 0x10000>;
+ #clock-cells = <1>;
+ clocks = <&clk IMX_LSIO_PWM0_CLK>, <&clk IMX_LSIO_PWM0_CLK>,
+ <&clk IMX_LSIO_PWM0_CLK>, <&lsio_bus_clk>,
+ <&clk IMX_LSIO_PWM0_CLK>;
+ clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_1>,
+ <IMX_LPCG_CLK_4>, <IMX_LPCG_CLK_5>,
+ <IMX_LPCG_CLK_6>;
+ clock-output-names = "pwm0_lpcg_ipg_clk",
+ "pwm0_lpcg_ipg_hf_clk",
+ "pwm0_lpcg_ipg_s_clk",
+ "pwm0_lpcg_ipg_slv_clk",
+ "pwm0_lpcg_ipg_mstr_clk";
+ power-domains = <&pd IMX_SC_R_PWM_0>;
+ };
+
+ pwm1_lpcg: clock-controller@5d410000 {
+ reg = <0x5d410000 0x10000>;
+ #clock-cells = <1>;
+ clocks = <&clk IMX_LSIO_PWM1_CLK>, <&clk IMX_LSIO_PWM1_CLK>,
+ <&clk IMX_LSIO_PWM1_CLK>, <&lsio_bus_clk>,
+ <&clk IMX_LSIO_PWM1_CLK>;
+ clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_1>,
+ <IMX_LPCG_CLK_4>, <IMX_LPCG_CLK_5>,
+ <IMX_LPCG_CLK_6>;
+ clock-output-names = "pwm1_lpcg_ipg_clk",
+ "pwm1_lpcg_ipg_hf_clk",
+ "pwm1_lpcg_ipg_s_clk",
+ "pwm1_lpcg_ipg_slv_clk",
+ "pwm1_lpcg_ipg_mstr_clk";
+ power-domains = <&pd IMX_SC_R_PWM_1>;
+ };
+
+ pwm2_lpcg: clock-controller@5d420000 {
+ reg = <0x5d420000 0x10000>;
+ #clock-cells = <1>;
+ clocks = <&clk IMX_LSIO_PWM2_CLK>, <&clk IMX_LSIO_PWM2_CLK>,
+ <&clk IMX_LSIO_PWM2_CLK>, <&lsio_bus_clk>,
+ <&clk IMX_LSIO_PWM2_CLK>;
+ clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_1>,
+ <IMX_LPCG_CLK_4>, <IMX_LPCG_CLK_5>,
+ <IMX_LPCG_CLK_6>;
+ clock-output-names = "pwm2_lpcg_ipg_clk",
+ "pwm2_lpcg_ipg_hf_clk",
+ "pwm2_lpcg_ipg_s_clk",
+ "pwm2_lpcg_ipg_slv_clk",
+ "pwm2_lpcg_ipg_mstr_clk";
+ power-domains = <&pd IMX_SC_R_PWM_2>;
+ };
+
+ pwm3_lpcg: clock-controller@5d430000 {
+ reg = <0x5d430000 0x10000>;
+ #clock-cells = <1>;
+ clocks = <&clk IMX_LSIO_PWM3_CLK>, <&clk IMX_LSIO_PWM3_CLK>,
+ <&clk IMX_LSIO_PWM3_CLK>, <&lsio_bus_clk>,
+ <&clk IMX_LSIO_PWM3_CLK>;
+ clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_1>,
+ <IMX_LPCG_CLK_4>, <IMX_LPCG_CLK_5>,
+ <IMX_LPCG_CLK_6>;
+ clock-output-names = "pwm3_lpcg_ipg_clk",
+ "pwm3_lpcg_ipg_hf_clk",
+ "pwm3_lpcg_ipg_s_clk",
+ "pwm3_lpcg_ipg_slv_clk",
+ "pwm3_lpcg_ipg_mstr_clk";
+ power-domains = <&pd IMX_SC_R_PWM_3>;
+ };
+
+ pwm4_lpcg: clock-controller@5d440000 {
+ reg = <0x5d440000 0x10000>;
+ #clock-cells = <1>;
+ clocks = <&clk IMX_LSIO_PWM4_CLK>, <&clk IMX_LSIO_PWM4_CLK>,
+ <&clk IMX_LSIO_PWM4_CLK>, <&lsio_bus_clk>,
+ <&clk IMX_LSIO_PWM4_CLK>;
+ clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_1>,
+ <IMX_LPCG_CLK_4>, <IMX_LPCG_CLK_5>,
+ <IMX_LPCG_CLK_6>;
+ clock-output-names = "pwm4_lpcg_ipg_clk",
+ "pwm4_lpcg_ipg_hf_clk",
+ "pwm4_lpcg_ipg_s_clk",
+ "pwm4_lpcg_ipg_slv_clk",
+ "pwm4_lpcg_ipg_mstr_clk";
+ power-domains = <&pd IMX_SC_R_PWM_4>;
+ };
+
+ pwm5_lpcg: clock-controller@5d450000 {
+ reg = <0x5d450000 0x10000>;
+ #clock-cells = <1>;
+ clocks = <&clk IMX_LSIO_PWM5_CLK>, <&clk IMX_LSIO_PWM5_CLK>,
+ <&clk IMX_LSIO_PWM5_CLK>, <&lsio_bus_clk>,
+ <&clk IMX_LSIO_PWM5_CLK>;
+ clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_1>,
+ <IMX_LPCG_CLK_4>, <IMX_LPCG_CLK_5>,
+ <IMX_LPCG_CLK_6>;
+ clock-output-names = "pwm5_lpcg_ipg_clk",
+ "pwm5_lpcg_ipg_hf_clk",
+ "pwm5_lpcg_ipg_s_clk",
+ "pwm5_lpcg_ipg_slv_clk",
+ "pwm5_lpcg_ipg_mstr_clk";
+ power-domains = <&pd IMX_SC_R_PWM_5>;
+ };
+
+ pwm6_lpcg: clock-controller@5d460000 {
+ reg = <0x5d460000 0x10000>;
+ #clock-cells = <1>;
+ clocks = <&clk IMX_LSIO_PWM6_CLK>, <&clk IMX_LSIO_PWM6_CLK>,
+ <&clk IMX_LSIO_PWM6_CLK>, <&lsio_bus_clk>,
+ <&clk IMX_LSIO_PWM6_CLK>;
+ clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_1>,
+ <IMX_LPCG_CLK_4>, <IMX_LPCG_CLK_5>,
+ <IMX_LPCG_CLK_6>;
+ clock-output-names = "pwm6_lpcg_ipg_clk",
+ "pwm6_lpcg_ipg_hf_clk",
+ "pwm6_lpcg_ipg_s_clk",
+ "pwm6_lpcg_ipg_slv_clk",
+ "pwm6_lpcg_ipg_mstr_clk";
+ power-domains = <&pd IMX_SC_R_PWM_6>;
+ };
+
+ pwm7_lpcg: clock-controller@5d470000 {
+ reg = <0x5d470000 0x10000>;
+ #clock-cells = <1>;
+ clocks = <&clk IMX_LSIO_PWM7_CLK>, <&clk IMX_LSIO_PWM7_CLK>,
+ <&clk IMX_LSIO_PWM7_CLK>, <&lsio_bus_clk>,
+ <&clk IMX_LSIO_PWM7_CLK>;
+ clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_1>,
+ <IMX_LPCG_CLK_4>, <IMX_LPCG_CLK_5>,
+ <IMX_LPCG_CLK_6>;
+ clock-output-names = "pwm7_lpcg_ipg_clk",
+ "pwm7_lpcg_ipg_hf_clk",
+ "pwm7_lpcg_ipg_s_clk",
+ "pwm7_lpcg_ipg_slv_clk",
+ "pwm7_lpcg_ipg_mstr_clk";
+ power-domains = <&pd IMX_SC_R_PWM_7>;
+ };
};
--
2.25.1
WARNING: multiple messages have this Message-ID (diff)
From: Dong Aisheng <aisheng.dong@nxp.com>
To: linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org
Cc: dongas86@gmail.com, kernel@pengutronix.de, shawnguo@kernel.org,
robh+dt@kernel.org, linux-imx@nxp.com, jan.kiszka@siemens.com,
Dong Aisheng <aisheng.dong@nxp.com>,
Mark Rutland <mark.rutland@arm.com>,
Fabio Estevam <fabio.estevam@nxp.com>
Subject: [PATCH v5 06/18] arm64: dts: imx8: add lsio lpcg clocks
Date: Fri, 5 Mar 2021 21:17:36 +0800 [thread overview]
Message-ID: <1614950268-22073-8-git-send-email-aisheng.dong@nxp.com> (raw)
In-Reply-To: <1614950268-22073-1-git-send-email-aisheng.dong@nxp.com>
Add lsio lpcg clocks
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: devicetree@vger.kernel.org
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Sascha Hauer <kernel@pengutronix.de>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>
---
ChangeLog:
v4->v5:
* no changes
v2->v4:
* update to use clock-indices property instead of bit-offset property
v1->v2:
* Use old SCU clock binding temporarily to avoid build warning due to SCU
clock cell will be changed to 2.
* add power domain property
---
.../boot/dts/freescale/imx8-ss-lsio.dtsi | 156 +++++++++++++++++-
1 file changed, 155 insertions(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/freescale/imx8-ss-lsio.dtsi b/arch/arm64/boot/dts/freescale/imx8-ss-lsio.dtsi
index 70902f56cdb1..babe6c3e2c76 100644
--- a/arch/arm64/boot/dts/freescale/imx8-ss-lsio.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8-ss-lsio.dtsi
@@ -4,12 +4,29 @@
* Dong Aisheng <aisheng.dong@nxp.com>
*/
+#include <dt-bindings/clock/imx8-lpcg.h>
+#include <dt-bindings/firmware/imx/rsrc.h>
+
lsio_subsys: bus@5d000000 {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x5d000000 0x0 0x5d000000 0x1000000>;
+ lsio_mem_clk: clock-lsio-mem {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <200000000>;
+ clock-output-names = "lsio_mem_clk";
+ };
+
+ lsio_bus_clk: clock-lsio-bus {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <100000000>;
+ clock-output-names = "lsio_bus_clk";
+ };
+
lsio_gpio0: gpio@5d080000 {
reg = <0x5d080000 0x10000>;
interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>;
@@ -131,8 +148,145 @@ lsio_mu13: mailbox@5d280000 {
power-domains = <&pd IMX_SC_R_MU_13A>;
};
- lsio_lpcg: clock-controller@5d400000 {
+ /* LPCG clocks */
+ lsio_lpcg: clock-controller-legacy@5d400000 {
reg = <0x5d400000 0x400000>;
#clock-cells = <1>;
};
+
+ pwm0_lpcg: clock-controller@5d400000 {
+ reg = <0x5d400000 0x10000>;
+ #clock-cells = <1>;
+ clocks = <&clk IMX_LSIO_PWM0_CLK>, <&clk IMX_LSIO_PWM0_CLK>,
+ <&clk IMX_LSIO_PWM0_CLK>, <&lsio_bus_clk>,
+ <&clk IMX_LSIO_PWM0_CLK>;
+ clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_1>,
+ <IMX_LPCG_CLK_4>, <IMX_LPCG_CLK_5>,
+ <IMX_LPCG_CLK_6>;
+ clock-output-names = "pwm0_lpcg_ipg_clk",
+ "pwm0_lpcg_ipg_hf_clk",
+ "pwm0_lpcg_ipg_s_clk",
+ "pwm0_lpcg_ipg_slv_clk",
+ "pwm0_lpcg_ipg_mstr_clk";
+ power-domains = <&pd IMX_SC_R_PWM_0>;
+ };
+
+ pwm1_lpcg: clock-controller@5d410000 {
+ reg = <0x5d410000 0x10000>;
+ #clock-cells = <1>;
+ clocks = <&clk IMX_LSIO_PWM1_CLK>, <&clk IMX_LSIO_PWM1_CLK>,
+ <&clk IMX_LSIO_PWM1_CLK>, <&lsio_bus_clk>,
+ <&clk IMX_LSIO_PWM1_CLK>;
+ clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_1>,
+ <IMX_LPCG_CLK_4>, <IMX_LPCG_CLK_5>,
+ <IMX_LPCG_CLK_6>;
+ clock-output-names = "pwm1_lpcg_ipg_clk",
+ "pwm1_lpcg_ipg_hf_clk",
+ "pwm1_lpcg_ipg_s_clk",
+ "pwm1_lpcg_ipg_slv_clk",
+ "pwm1_lpcg_ipg_mstr_clk";
+ power-domains = <&pd IMX_SC_R_PWM_1>;
+ };
+
+ pwm2_lpcg: clock-controller@5d420000 {
+ reg = <0x5d420000 0x10000>;
+ #clock-cells = <1>;
+ clocks = <&clk IMX_LSIO_PWM2_CLK>, <&clk IMX_LSIO_PWM2_CLK>,
+ <&clk IMX_LSIO_PWM2_CLK>, <&lsio_bus_clk>,
+ <&clk IMX_LSIO_PWM2_CLK>;
+ clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_1>,
+ <IMX_LPCG_CLK_4>, <IMX_LPCG_CLK_5>,
+ <IMX_LPCG_CLK_6>;
+ clock-output-names = "pwm2_lpcg_ipg_clk",
+ "pwm2_lpcg_ipg_hf_clk",
+ "pwm2_lpcg_ipg_s_clk",
+ "pwm2_lpcg_ipg_slv_clk",
+ "pwm2_lpcg_ipg_mstr_clk";
+ power-domains = <&pd IMX_SC_R_PWM_2>;
+ };
+
+ pwm3_lpcg: clock-controller@5d430000 {
+ reg = <0x5d430000 0x10000>;
+ #clock-cells = <1>;
+ clocks = <&clk IMX_LSIO_PWM3_CLK>, <&clk IMX_LSIO_PWM3_CLK>,
+ <&clk IMX_LSIO_PWM3_CLK>, <&lsio_bus_clk>,
+ <&clk IMX_LSIO_PWM3_CLK>;
+ clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_1>,
+ <IMX_LPCG_CLK_4>, <IMX_LPCG_CLK_5>,
+ <IMX_LPCG_CLK_6>;
+ clock-output-names = "pwm3_lpcg_ipg_clk",
+ "pwm3_lpcg_ipg_hf_clk",
+ "pwm3_lpcg_ipg_s_clk",
+ "pwm3_lpcg_ipg_slv_clk",
+ "pwm3_lpcg_ipg_mstr_clk";
+ power-domains = <&pd IMX_SC_R_PWM_3>;
+ };
+
+ pwm4_lpcg: clock-controller@5d440000 {
+ reg = <0x5d440000 0x10000>;
+ #clock-cells = <1>;
+ clocks = <&clk IMX_LSIO_PWM4_CLK>, <&clk IMX_LSIO_PWM4_CLK>,
+ <&clk IMX_LSIO_PWM4_CLK>, <&lsio_bus_clk>,
+ <&clk IMX_LSIO_PWM4_CLK>;
+ clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_1>,
+ <IMX_LPCG_CLK_4>, <IMX_LPCG_CLK_5>,
+ <IMX_LPCG_CLK_6>;
+ clock-output-names = "pwm4_lpcg_ipg_clk",
+ "pwm4_lpcg_ipg_hf_clk",
+ "pwm4_lpcg_ipg_s_clk",
+ "pwm4_lpcg_ipg_slv_clk",
+ "pwm4_lpcg_ipg_mstr_clk";
+ power-domains = <&pd IMX_SC_R_PWM_4>;
+ };
+
+ pwm5_lpcg: clock-controller@5d450000 {
+ reg = <0x5d450000 0x10000>;
+ #clock-cells = <1>;
+ clocks = <&clk IMX_LSIO_PWM5_CLK>, <&clk IMX_LSIO_PWM5_CLK>,
+ <&clk IMX_LSIO_PWM5_CLK>, <&lsio_bus_clk>,
+ <&clk IMX_LSIO_PWM5_CLK>;
+ clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_1>,
+ <IMX_LPCG_CLK_4>, <IMX_LPCG_CLK_5>,
+ <IMX_LPCG_CLK_6>;
+ clock-output-names = "pwm5_lpcg_ipg_clk",
+ "pwm5_lpcg_ipg_hf_clk",
+ "pwm5_lpcg_ipg_s_clk",
+ "pwm5_lpcg_ipg_slv_clk",
+ "pwm5_lpcg_ipg_mstr_clk";
+ power-domains = <&pd IMX_SC_R_PWM_5>;
+ };
+
+ pwm6_lpcg: clock-controller@5d460000 {
+ reg = <0x5d460000 0x10000>;
+ #clock-cells = <1>;
+ clocks = <&clk IMX_LSIO_PWM6_CLK>, <&clk IMX_LSIO_PWM6_CLK>,
+ <&clk IMX_LSIO_PWM6_CLK>, <&lsio_bus_clk>,
+ <&clk IMX_LSIO_PWM6_CLK>;
+ clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_1>,
+ <IMX_LPCG_CLK_4>, <IMX_LPCG_CLK_5>,
+ <IMX_LPCG_CLK_6>;
+ clock-output-names = "pwm6_lpcg_ipg_clk",
+ "pwm6_lpcg_ipg_hf_clk",
+ "pwm6_lpcg_ipg_s_clk",
+ "pwm6_lpcg_ipg_slv_clk",
+ "pwm6_lpcg_ipg_mstr_clk";
+ power-domains = <&pd IMX_SC_R_PWM_6>;
+ };
+
+ pwm7_lpcg: clock-controller@5d470000 {
+ reg = <0x5d470000 0x10000>;
+ #clock-cells = <1>;
+ clocks = <&clk IMX_LSIO_PWM7_CLK>, <&clk IMX_LSIO_PWM7_CLK>,
+ <&clk IMX_LSIO_PWM7_CLK>, <&lsio_bus_clk>,
+ <&clk IMX_LSIO_PWM7_CLK>;
+ clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_1>,
+ <IMX_LPCG_CLK_4>, <IMX_LPCG_CLK_5>,
+ <IMX_LPCG_CLK_6>;
+ clock-output-names = "pwm7_lpcg_ipg_clk",
+ "pwm7_lpcg_ipg_hf_clk",
+ "pwm7_lpcg_ipg_s_clk",
+ "pwm7_lpcg_ipg_slv_clk",
+ "pwm7_lpcg_ipg_mstr_clk";
+ power-domains = <&pd IMX_SC_R_PWM_7>;
+ };
};
--
2.25.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2021-03-05 13:31 UTC|newest]
Thread overview: 54+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-03-05 13:17 [PATCH v5 00/18] arm64: dts: imx8: architecture improvement and adding imx8qm support Dong Aisheng
2021-03-05 13:17 ` Dong Aisheng
2021-03-05 13:17 ` [PATCH v5 01/18] dt-bindings: arm: fsl: add imx8qm boards compatible string Dong Aisheng
2021-03-05 13:17 ` Dong Aisheng
2021-03-08 1:40 ` Shawn Guo
2021-03-08 1:40 ` Shawn Guo
2021-03-05 13:17 ` [PATCH 1/1] firmware: imx: scu-pd: do not power off console domain Dong Aisheng
2021-03-05 13:17 ` Dong Aisheng
2021-03-05 13:33 ` Aisheng Dong
2021-03-05 13:33 ` Aisheng Dong
2021-03-05 13:17 ` [PATCH v5 02/18] dt-bindings: mailbox: mu: add imx8qm support Dong Aisheng
2021-03-05 13:17 ` Dong Aisheng
2021-03-08 1:40 ` Shawn Guo
2021-03-08 1:40 ` Shawn Guo
2021-03-05 13:17 ` [PATCH v5 03/18] arm64: dts: imx8qxp: add fallback compatible string for scu pd Dong Aisheng
2021-03-05 13:17 ` Dong Aisheng
2021-03-05 13:17 ` [PATCH v5 04/18] arm64: dts: imx8qxp: move scu pd node before scu clock node Dong Aisheng
2021-03-05 13:17 ` Dong Aisheng
2021-03-05 13:17 ` [PATCH v5 05/18] arm64: dts: imx8qxp: orginize dts in subsystems Dong Aisheng
2021-03-05 13:17 ` Dong Aisheng
2021-03-05 13:17 ` Dong Aisheng [this message]
2021-03-05 13:17 ` [PATCH v5 06/18] arm64: dts: imx8: add lsio lpcg clocks Dong Aisheng
2021-03-05 13:17 ` [PATCH v5 07/18] arm64: dts: imx8: add conn " Dong Aisheng
2021-03-05 13:17 ` Dong Aisheng
2021-03-05 13:17 ` [PATCH v5 08/18] arm64: dts: imx8: add adma " Dong Aisheng
2021-03-05 13:17 ` Dong Aisheng
2021-03-05 13:17 ` [PATCH v5 09/18] arm64: dts: imx8: switch to two cell scu clock binding Dong Aisheng
2021-03-05 13:17 ` Dong Aisheng
2021-03-05 13:17 ` [PATCH v5 10/18] arm64: dts: imx8: switch to new lpcg " Dong Aisheng
2021-03-05 13:17 ` Dong Aisheng
2021-03-05 13:17 ` [PATCH v5 11/18] arm64: dts: imx8qm: add lsio ss support Dong Aisheng
2021-03-05 13:17 ` Dong Aisheng
2021-03-05 13:17 ` [PATCH v5 12/18] arm64: dts: imx8qm: add conn " Dong Aisheng
2021-03-05 13:17 ` Dong Aisheng
2021-03-05 13:17 ` [PATCH v5 13/18] arm64: dts: imx8: split adma ss into dma and audio ss Dong Aisheng
2021-03-05 13:17 ` Dong Aisheng
2021-03-05 13:17 ` [PATCH v5 14/18] arm64: dts: imx8qm: add dma ss support Dong Aisheng
2021-03-05 13:17 ` Dong Aisheng
2021-03-05 13:17 ` [PATCH v5 15/18] arm64: dts: imx: add imx8qm common dts file Dong Aisheng
2021-03-05 13:17 ` Dong Aisheng
2021-03-05 13:17 ` [PATCH v5 16/18] arm64: dts: imx: add imx8qm mek support Dong Aisheng
2021-03-05 13:17 ` Dong Aisheng
2021-03-05 13:17 ` [PATCH v5 17/18] arm64: defconfig: " Dong Aisheng
2021-03-05 13:17 ` Dong Aisheng
2021-03-08 1:44 ` Shawn Guo
2021-03-08 1:44 ` Shawn Guo
2021-03-05 13:17 ` [PATCH v5 18/18] firmware: imx: scu-pd: do not power off console domain Dong Aisheng
2021-03-05 13:17 ` Dong Aisheng
2021-03-08 1:45 ` Shawn Guo
2021-03-08 1:45 ` Shawn Guo
2021-03-08 1:59 ` [PATCH v5 00/18] arm64: dts: imx8: architecture improvement and adding imx8qm support Shawn Guo
2021-03-08 1:59 ` Shawn Guo
2021-03-08 2:29 ` Aisheng Dong
2021-03-08 2:29 ` Aisheng Dong
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1614950268-22073-8-git-send-email-aisheng.dong@nxp.com \
--to=aisheng.dong@nxp.com \
--cc=devicetree@vger.kernel.org \
--cc=dongas86@gmail.com \
--cc=fabio.estevam@nxp.com \
--cc=jan.kiszka@siemens.com \
--cc=kernel@pengutronix.de \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-imx@nxp.com \
--cc=mark.rutland@arm.com \
--cc=robh+dt@kernel.org \
--cc=shawnguo@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.