From: dillon.minfei@gmail.com
To: mchehab@kernel.org, mchehab+huawei@kernel.org,
hverkuil-cisco@xs4all.nl, ezequiel@collabora.com,
gnurou@gmail.com, pihsun@chromium.org, mcoquelin.stm32@gmail.com,
alexandre.torgue@foss.st.com, mturquette@baylibre.com,
sboyd@kernel.org, robh+dt@kernel.org
Cc: patrice.chotard@foss.st.com, hugues.fruchet@foss.st.com,
linux-media@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-stm32@st-md-mailman.stormreply.com,
linux-arm-kernel@lists.infradead.org, linux-clk@vger.kernel.org,
devicetree@vger.kernel.org, Dillon Min <dillon.minfei@gmail.com>
Subject: [PATCH v2 4/9] ARM: dts: stm32: Enable DMA2D support on STM32F429 MCU
Date: Thu, 15 Jul 2021 17:24:23 +0800 [thread overview]
Message-ID: <1626341068-20253-15-git-send-email-dillon.minfei@gmail.com> (raw)
In-Reply-To: <1626341068-20253-1-git-send-email-dillon.minfei@gmail.com>
From: Dillon Min <dillon.minfei@gmail.com>
Enable DMA2D on STM32F429 MCU.
Signed-off-by: Dillon Min <dillon.minfei@gmail.com>
---
v2: no change
arch/arm/boot/dts/stm32f429.dtsi | 10 ++++++++++
1 file changed, 10 insertions(+)
diff --git a/arch/arm/boot/dts/stm32f429.dtsi b/arch/arm/boot/dts/stm32f429.dtsi
index 8748d5850298..a06437f2210d 100644
--- a/arch/arm/boot/dts/stm32f429.dtsi
+++ b/arch/arm/boot/dts/stm32f429.dtsi
@@ -791,6 +791,16 @@
status = "disabled";
};
+ dma2d: dma2d@4002b000 {
+ compatible = "st,stm32-dma2d";
+ reg = <0x4002b000 0xc00>;
+ interrupts = <90>;
+ resets = <&rcc STM32F4_AHB1_RESET(DMA2D)>;
+ clocks = <&rcc 0 STM32F4_AHB1_CLOCK(DMA2D)>;
+ clock-names = "dma2d";
+ status = "disabled";
+ };
+
rng: rng@50060800 {
compatible = "st,stm32-rng";
reg = <0x50060800 0x400>;
--
2.7.4
WARNING: multiple messages have this Message-ID (diff)
From: dillon.minfei@gmail.com
To: mchehab@kernel.org, mchehab+huawei@kernel.org,
hverkuil-cisco@xs4all.nl, ezequiel@collabora.com,
gnurou@gmail.com, pihsun@chromium.org, mcoquelin.stm32@gmail.com,
alexandre.torgue@foss.st.com, mturquette@baylibre.com,
sboyd@kernel.org, robh+dt@kernel.org
Cc: patrice.chotard@foss.st.com, hugues.fruchet@foss.st.com,
linux-media@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-stm32@st-md-mailman.stormreply.com,
linux-arm-kernel@lists.infradead.org, linux-clk@vger.kernel.org,
devicetree@vger.kernel.org, Dillon Min <dillon.minfei@gmail.com>
Subject: [PATCH v2 4/9] ARM: dts: stm32: Enable DMA2D support on STM32F429 MCU
Date: Thu, 15 Jul 2021 17:24:23 +0800 [thread overview]
Message-ID: <1626341068-20253-15-git-send-email-dillon.minfei@gmail.com> (raw)
In-Reply-To: <1626341068-20253-1-git-send-email-dillon.minfei@gmail.com>
From: Dillon Min <dillon.minfei@gmail.com>
Enable DMA2D on STM32F429 MCU.
Signed-off-by: Dillon Min <dillon.minfei@gmail.com>
---
v2: no change
arch/arm/boot/dts/stm32f429.dtsi | 10 ++++++++++
1 file changed, 10 insertions(+)
diff --git a/arch/arm/boot/dts/stm32f429.dtsi b/arch/arm/boot/dts/stm32f429.dtsi
index 8748d5850298..a06437f2210d 100644
--- a/arch/arm/boot/dts/stm32f429.dtsi
+++ b/arch/arm/boot/dts/stm32f429.dtsi
@@ -791,6 +791,16 @@
status = "disabled";
};
+ dma2d: dma2d@4002b000 {
+ compatible = "st,stm32-dma2d";
+ reg = <0x4002b000 0xc00>;
+ interrupts = <90>;
+ resets = <&rcc STM32F4_AHB1_RESET(DMA2D)>;
+ clocks = <&rcc 0 STM32F4_AHB1_CLOCK(DMA2D)>;
+ clock-names = "dma2d";
+ status = "disabled";
+ };
+
rng: rng@50060800 {
compatible = "st,stm32-rng";
reg = <0x50060800 0x400>;
--
2.7.4
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2021-07-15 9:25 UTC|newest]
Thread overview: 50+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-07-15 9:24 [PATCH v2 0/9] Add support for DMA2D of STMicroelectronics STM32 Soc series dillon.minfei
2021-07-15 9:24 ` dillon.minfei
2021-07-15 9:24 ` [PATCH v2 1/9] media: admin-guide: add stm32-dma2d description dillon.minfei
2021-07-15 9:24 ` dillon.minfei
2021-07-15 9:24 ` [PATCH v2 2/9] media: dt-bindings: media: add document for STM32 DMA2d bindings dillon.minfei
2021-07-15 9:24 ` dillon.minfei
2021-07-15 9:24 ` [PATCH v2 3/9] clk: stm32: Fix ltdc's clock turn off by clk_disable_unused() after kernel startup dillon.minfei
2021-07-15 9:24 ` dillon.minfei
2021-07-15 9:24 ` [PATCH v2 4/9] ARM: dts: stm32: Enable DMA2D support on STM32F429 MCU dillon.minfei
2021-07-15 9:24 ` dillon.minfei
2021-07-15 9:24 ` [PATCH v2 5/9] ARM: dts: stm32: Enable DMA2D on STM32F469-DISCO board dillon.minfei
2021-07-15 9:24 ` dillon.minfei
2021-07-15 9:24 ` [PATCH v2 6/9] media: v4l2-mem2mem: add v4l2_m2m_get_unmapped_area for no-mmu platform dillon.minfei
2021-07-15 9:24 ` dillon.minfei
2021-07-15 9:24 ` [PATCH v2 7/9] media: docs: add doc for the stm32 dma2d driver dillon.minfei
2021-07-15 9:24 ` dillon.minfei
2021-07-15 9:24 ` [PATCH v2 8/9] media: v4l: uapi: Add user control base for stm32 dma2d controls dillon.minfei
2021-07-15 9:24 ` dillon.minfei
2021-07-15 9:24 ` [PATCH v2 9/9] media: stm32-dma2d: STM32 DMA2D driver dillon.minfei
2021-07-15 9:24 ` dillon.minfei
2021-07-15 9:24 ` [PATCH v2 0/9] Add support for DMA2D of STMicroelectronics STM32 Soc series dillon.minfei
2021-07-15 9:24 ` dillon.minfei
2021-07-15 9:24 ` [PATCH v2 1/9] media: admin-guide: add stm32-dma2d description dillon.minfei
2021-07-15 9:24 ` dillon.minfei
2021-07-15 9:24 ` [PATCH v2 2/9] media: dt-bindings: media: add document for STM32 DMA2d bindings dillon.minfei
2021-07-15 9:24 ` dillon.minfei
2021-07-15 9:24 ` [PATCH v2 3/9] clk: stm32: Fix ltdc's clock turn off by clk_disable_unused() after kernel startup dillon.minfei
2021-07-15 9:24 ` dillon.minfei
2021-07-15 9:24 ` dillon.minfei [this message]
2021-07-15 9:24 ` [PATCH v2 4/9] ARM: dts: stm32: Enable DMA2D support on STM32F429 MCU dillon.minfei
2021-07-15 9:24 ` [PATCH v2 5/9] ARM: dts: stm32: Enable DMA2D on STM32F469-DISCO board dillon.minfei
2021-07-15 9:24 ` dillon.minfei
2021-07-15 9:24 ` [PATCH v2 6/9] media: v4l2-mem2mem: add v4l2_m2m_get_unmapped_area for no-mmu platform dillon.minfei
2021-07-15 9:24 ` dillon.minfei
2021-07-15 9:24 ` [PATCH v2 7/9] media: docs: add doc for the stm32 dma2d driver dillon.minfei
2021-07-15 9:24 ` dillon.minfei
2021-08-09 9:15 ` Hans Verkuil
2021-08-09 9:15 ` Hans Verkuil
2021-08-10 8:52 ` Dillon Min
2021-08-10 8:52 ` Dillon Min
2021-07-15 9:24 ` [PATCH v2 8/9] media: v4l: uapi: Add user control base for stm32 dma2d controls dillon.minfei
2021-07-15 9:24 ` dillon.minfei
2021-07-15 9:24 ` [PATCH v2 9/9] media: stm32-dma2d: STM32 DMA2D driver dillon.minfei
2021-07-15 9:24 ` dillon.minfei
2021-08-09 9:09 ` Hans Verkuil
2021-08-09 9:09 ` Hans Verkuil
2021-08-10 8:51 ` Dillon Min
2021-08-10 8:51 ` Dillon Min
2021-08-05 8:59 ` [PATCH v2 0/9] Add support for DMA2D of STMicroelectronics STM32 Soc series Dillon Min
2021-08-05 8:59 ` Dillon Min
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1626341068-20253-15-git-send-email-dillon.minfei@gmail.com \
--to=dillon.minfei@gmail.com \
--cc=alexandre.torgue@foss.st.com \
--cc=devicetree@vger.kernel.org \
--cc=ezequiel@collabora.com \
--cc=gnurou@gmail.com \
--cc=hugues.fruchet@foss.st.com \
--cc=hverkuil-cisco@xs4all.nl \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=linux-stm32@st-md-mailman.stormreply.com \
--cc=mchehab+huawei@kernel.org \
--cc=mchehab@kernel.org \
--cc=mcoquelin.stm32@gmail.com \
--cc=mturquette@baylibre.com \
--cc=patrice.chotard@foss.st.com \
--cc=pihsun@chromium.org \
--cc=robh+dt@kernel.org \
--cc=sboyd@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.