All of lore.kernel.org
 help / color / mirror / Atom feed
From: Kuogee Hsieh <quic_khsieh@quicinc.com>
To: <dri-devel@lists.freedesktop.org>, <robdclark@gmail.com>,
	<sean@poorly.run>, <swboyd@chromium.org>, <vkoul@kernel.org>,
	<daniel@ffwll.ch>, <airlied@linux.ie>, <agross@kernel.org>,
	<dmitry.baryshkov@linaro.org>, <bjorn.andersson@linaro.org>
Cc: Kuogee Hsieh <quic_khsieh@quicinc.com>,
	<quic_abhinavk@quicinc.com>, <quic_aravindh@quicinc.com>,
	<quic_sbillaka@quicinc.com>, <freedreno@lists.freedesktop.org>,
	<linux-arm-msm@vger.kernel.org>, <linux-kernel@vger.kernel.org>
Subject: [PATCH v7 3/4] drm/msm/dpu: replace BIT(x) with correspond marco define string
Date: Wed, 16 Feb 2022 14:05:05 -0800	[thread overview]
Message-ID: <1645049106-30481-4-git-send-email-quic_khsieh@quicinc.com> (raw)
In-Reply-To: <1645049106-30481-1-git-send-email-quic_khsieh@quicinc.com>

To improve code readability, this patch replace BIT(x) with
correspond register bit define string

Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
---
 drivers/gpu/drm/msm/disp/dpu1/dpu_hw_intf.c | 16 +++++++++++-----
 1 file changed, 11 insertions(+), 5 deletions(-)

diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_intf.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_intf.c
index b68e696..8f10aab 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_intf.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_intf.c
@@ -61,6 +61,12 @@
 
 #define   INTF_MUX                      0x25C
 
+#define INTF_CFG_ACTIVE_H_EN    BIT(29)
+#define INTF_CFG_ACTIVE_V_EN    BIT(30)
+
+#define INTF_CFG2_DATABUS_WIDEN BIT(0)
+#define INTF_CFG2_DATA_HCTL_EN  BIT(4)
+
 static const struct dpu_intf_cfg *_intf_offset(enum dpu_intf intf,
 		const struct dpu_mdss_cfg *m,
 		void __iomem *addr,
@@ -139,13 +145,13 @@ static void dpu_hw_intf_setup_timing_engine(struct dpu_hw_intf *ctx,
 
 	if (active_h_end) {
 		active_hctl = (active_h_end << 16) | active_h_start;
-		intf_cfg |= BIT(29);
+		intf_cfg |= INTF_CFG_ACTIVE_H_EN;
 	} else {
 		active_hctl = 0;
 	}
 
 	if (active_v_end)
-		intf_cfg |= BIT(30);
+		intf_cfg |= INTF_CFG_ACTIVE_V_EN;
 
 	hsync_ctl = (hsync_period << 16) | p->hsync_pulse_width;
 	display_hctl = (hsync_end_x << 16) | hsync_start_x;
@@ -156,7 +162,7 @@ static void dpu_hw_intf_setup_timing_engine(struct dpu_hw_intf *ctx,
 	 * if compression is enabled in 1 pixel per clock mode
 	 */
 	if (p->wide_bus_en)
-		intf_cfg2 |=  (BIT(0) | BIT(4));
+		intf_cfg2 |= (INTF_CFG2_DATABUS_WIDEN | INTF_CFG2_DATA_HCTL_EN);
 
 	data_width = p->width;
 
@@ -178,8 +184,8 @@ static void dpu_hw_intf_setup_timing_engine(struct dpu_hw_intf *ctx,
 		active_hctl = (active_h_end << 16) | active_h_start;
 		display_hctl = active_hctl;
 
-		intf_cfg |= BIT(29);
-		intf_cfg |= BIT(30);
+		intf_cfg |= INTF_CFG_ACTIVE_H_EN;
+		intf_cfg |= INTF_CFG_ACTIVE_V_EN;
 	}
 
 	den_polarity = 0;
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project


WARNING: multiple messages have this Message-ID (diff)
From: Kuogee Hsieh <quic_khsieh@quicinc.com>
To: <dri-devel@lists.freedesktop.org>, <robdclark@gmail.com>,
	<sean@poorly.run>, <swboyd@chromium.org>, <vkoul@kernel.org>,
	<daniel@ffwll.ch>, <airlied@linux.ie>, <agross@kernel.org>,
	<dmitry.baryshkov@linaro.org>, <bjorn.andersson@linaro.org>
Cc: quic_sbillaka@quicinc.com, linux-arm-msm@vger.kernel.org,
	quic_abhinavk@quicinc.com, Kuogee Hsieh <quic_khsieh@quicinc.com>,
	quic_aravindh@quicinc.com, freedreno@lists.freedesktop.org,
	linux-kernel@vger.kernel.org
Subject: [PATCH v7 3/4] drm/msm/dpu: replace BIT(x) with correspond marco define string
Date: Wed, 16 Feb 2022 14:05:05 -0800	[thread overview]
Message-ID: <1645049106-30481-4-git-send-email-quic_khsieh@quicinc.com> (raw)
In-Reply-To: <1645049106-30481-1-git-send-email-quic_khsieh@quicinc.com>

To improve code readability, this patch replace BIT(x) with
correspond register bit define string

Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
---
 drivers/gpu/drm/msm/disp/dpu1/dpu_hw_intf.c | 16 +++++++++++-----
 1 file changed, 11 insertions(+), 5 deletions(-)

diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_intf.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_intf.c
index b68e696..8f10aab 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_intf.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_intf.c
@@ -61,6 +61,12 @@
 
 #define   INTF_MUX                      0x25C
 
+#define INTF_CFG_ACTIVE_H_EN    BIT(29)
+#define INTF_CFG_ACTIVE_V_EN    BIT(30)
+
+#define INTF_CFG2_DATABUS_WIDEN BIT(0)
+#define INTF_CFG2_DATA_HCTL_EN  BIT(4)
+
 static const struct dpu_intf_cfg *_intf_offset(enum dpu_intf intf,
 		const struct dpu_mdss_cfg *m,
 		void __iomem *addr,
@@ -139,13 +145,13 @@ static void dpu_hw_intf_setup_timing_engine(struct dpu_hw_intf *ctx,
 
 	if (active_h_end) {
 		active_hctl = (active_h_end << 16) | active_h_start;
-		intf_cfg |= BIT(29);
+		intf_cfg |= INTF_CFG_ACTIVE_H_EN;
 	} else {
 		active_hctl = 0;
 	}
 
 	if (active_v_end)
-		intf_cfg |= BIT(30);
+		intf_cfg |= INTF_CFG_ACTIVE_V_EN;
 
 	hsync_ctl = (hsync_period << 16) | p->hsync_pulse_width;
 	display_hctl = (hsync_end_x << 16) | hsync_start_x;
@@ -156,7 +162,7 @@ static void dpu_hw_intf_setup_timing_engine(struct dpu_hw_intf *ctx,
 	 * if compression is enabled in 1 pixel per clock mode
 	 */
 	if (p->wide_bus_en)
-		intf_cfg2 |=  (BIT(0) | BIT(4));
+		intf_cfg2 |= (INTF_CFG2_DATABUS_WIDEN | INTF_CFG2_DATA_HCTL_EN);
 
 	data_width = p->width;
 
@@ -178,8 +184,8 @@ static void dpu_hw_intf_setup_timing_engine(struct dpu_hw_intf *ctx,
 		active_hctl = (active_h_end << 16) | active_h_start;
 		display_hctl = active_hctl;
 
-		intf_cfg |= BIT(29);
-		intf_cfg |= BIT(30);
+		intf_cfg |= INTF_CFG_ACTIVE_H_EN;
+		intf_cfg |= INTF_CFG_ACTIVE_V_EN;
 	}
 
 	den_polarity = 0;
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project


  parent reply	other threads:[~2022-02-16 22:05 UTC|newest]

Thread overview: 18+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-02-16 22:05 [PATCH v7 0/2] drm/msm/dp: enable widebus feature base on chip hardware revision Kuogee Hsieh
2022-02-16 22:05 ` Kuogee Hsieh
2022-02-16 22:05 ` [PATCH v7 1/4] drm/msm/dpu: revise timing engine programming to support widebus feature Kuogee Hsieh
2022-02-16 22:05   ` Kuogee Hsieh
2022-02-17  6:34   ` Dmitry Baryshkov
2022-02-17  6:34     ` Dmitry Baryshkov
2022-02-17 20:24     ` Kuogee Hsieh
2022-02-17 20:24       ` Kuogee Hsieh
2022-02-16 22:05 ` [PATCH v7 2/4] drm/msm/dpu: delete DATA_HCTL_EN from sc7280 hw feature Kuogee Hsieh
2022-02-16 22:05   ` Kuogee Hsieh
2022-02-16 22:05 ` Kuogee Hsieh [this message]
2022-02-16 22:05   ` [PATCH v7 3/4] drm/msm/dpu: replace BIT(x) with correspond marco define string Kuogee Hsieh
2022-02-17  6:46   ` Dmitry Baryshkov
2022-02-17  6:46     ` Dmitry Baryshkov
2022-02-16 22:05 ` [PATCH v7 4/4] drm/msm/dp: enable widebus feature for display port Kuogee Hsieh
2022-02-16 22:05   ` Kuogee Hsieh
2022-02-17  6:45   ` Dmitry Baryshkov
2022-02-17  6:45     ` Dmitry Baryshkov

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1645049106-30481-4-git-send-email-quic_khsieh@quicinc.com \
    --to=quic_khsieh@quicinc.com \
    --cc=agross@kernel.org \
    --cc=airlied@linux.ie \
    --cc=bjorn.andersson@linaro.org \
    --cc=daniel@ffwll.ch \
    --cc=dmitry.baryshkov@linaro.org \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=freedreno@lists.freedesktop.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=quic_abhinavk@quicinc.com \
    --cc=quic_aravindh@quicinc.com \
    --cc=quic_sbillaka@quicinc.com \
    --cc=robdclark@gmail.com \
    --cc=sean@poorly.run \
    --cc=swboyd@chromium.org \
    --cc=vkoul@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.