All of lore.kernel.org
 help / color / mirror / Atom feed
From: Richard Zhu <hongxing.zhu@nxp.com>
To: l.stach@pengutronix.de, bhelgaas@google.com, robh+dt@kernel.org,
	broonie@kernel.org, lorenzo.pieralisi@arm.com,
	festevam@gmail.com, francesco.dolcini@toradex.com
Cc: hongxing.zhu@nxp.com, linux-pci@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org, kernel@pengutronix.de,
	linux-imx@nxp.com
Subject: [PATCH v11 5/8] PCI: imx6: Turn off regulator when the system is in suspend mode
Date: Tue, 14 Jun 2022 14:58:59 +0800	[thread overview]
Message-ID: <1655189942-12678-6-git-send-email-hongxing.zhu@nxp.com> (raw)
In-Reply-To: <1655189942-12678-1-git-send-email-hongxing.zhu@nxp.com>

The driver should undo any enables it did itself. The regulator disable
shouldn't be basing decisions on regulator_is_enabled().

Move the regulator_disable to the suspend function, turn off regulator
when the system is in suspend mode.

To keep the balance of the regulator usage counter, disable the
regulator in shutdown.

Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
---
 drivers/pci/controller/dwc/pci-imx6.c | 19 +++++++------------
 1 file changed, 7 insertions(+), 12 deletions(-)

diff --git a/drivers/pci/controller/dwc/pci-imx6.c b/drivers/pci/controller/dwc/pci-imx6.c
index 368e14e9cade..c05974abd954 100644
--- a/drivers/pci/controller/dwc/pci-imx6.c
+++ b/drivers/pci/controller/dwc/pci-imx6.c
@@ -369,8 +369,6 @@ static int imx6_pcie_attach_pd(struct device *dev)
 
 static void imx6_pcie_assert_core_reset(struct imx6_pcie *imx6_pcie)
 {
-	struct device *dev = imx6_pcie->pci->dev;
-
 	switch (imx6_pcie->drvdata->variant) {
 	case IMX7D:
 	case IMX8MQ:
@@ -401,14 +399,6 @@ static void imx6_pcie_assert_core_reset(struct imx6_pcie *imx6_pcie)
 		break;
 	}
 
-	if (imx6_pcie->vpcie && regulator_is_enabled(imx6_pcie->vpcie) > 0) {
-		int ret = regulator_disable(imx6_pcie->vpcie);
-
-		if (ret)
-			dev_err(dev, "failed to disable vpcie regulator: %d\n",
-				ret);
-	}
-
 	/* Some boards don't have PCIe reset GPIO. */
 	if (gpio_is_valid(imx6_pcie->reset_gpio))
 		gpio_set_value_cansleep(imx6_pcie->reset_gpio,
@@ -585,7 +575,7 @@ static int imx6_pcie_deassert_core_reset(struct imx6_pcie *imx6_pcie)
 	struct device *dev = pci->dev;
 	int ret, err;
 
-	if (imx6_pcie->vpcie && !regulator_is_enabled(imx6_pcie->vpcie)) {
+	if (imx6_pcie->vpcie) {
 		ret = regulator_enable(imx6_pcie->vpcie);
 		if (ret) {
 			dev_err(dev, "failed to enable vpcie regulator: %d\n",
@@ -658,7 +648,7 @@ static int imx6_pcie_deassert_core_reset(struct imx6_pcie *imx6_pcie)
 	return 0;
 
 err_clks:
-	if (imx6_pcie->vpcie && regulator_is_enabled(imx6_pcie->vpcie) > 0) {
+	if (imx6_pcie->vpcie) {
 		ret = regulator_disable(imx6_pcie->vpcie);
 		if (ret)
 			dev_err(dev, "failed to disable vpcie regulator: %d\n",
@@ -1018,6 +1008,9 @@ static int imx6_pcie_suspend_noirq(struct device *dev)
 		break;
 	}
 
+	if (imx6_pcie->vpcie)
+		regulator_disable(imx6_pcie->vpcie);
+
 	return 0;
 }
 
@@ -1264,6 +1257,8 @@ static void imx6_pcie_shutdown(struct platform_device *pdev)
 
 	/* bring down link, so bootloader gets clean state in case of reboot */
 	imx6_pcie_assert_core_reset(imx6_pcie);
+	if (imx6_pcie->vpcie)
+		regulator_disable(imx6_pcie->vpcie);
 }
 
 static const struct imx6_pcie_drvdata drvdata[] = {
-- 
2.25.1


WARNING: multiple messages have this Message-ID (diff)
From: Richard Zhu <hongxing.zhu@nxp.com>
To: l.stach@pengutronix.de, bhelgaas@google.com, robh+dt@kernel.org,
	broonie@kernel.org, lorenzo.pieralisi@arm.com,
	festevam@gmail.com, francesco.dolcini@toradex.com
Cc: hongxing.zhu@nxp.com, linux-pci@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org, kernel@pengutronix.de,
	linux-imx@nxp.com
Subject: [PATCH v11 5/8] PCI: imx6: Turn off regulator when the system is in suspend mode
Date: Tue, 14 Jun 2022 14:58:59 +0800	[thread overview]
Message-ID: <1655189942-12678-6-git-send-email-hongxing.zhu@nxp.com> (raw)
In-Reply-To: <1655189942-12678-1-git-send-email-hongxing.zhu@nxp.com>

The driver should undo any enables it did itself. The regulator disable
shouldn't be basing decisions on regulator_is_enabled().

Move the regulator_disable to the suspend function, turn off regulator
when the system is in suspend mode.

To keep the balance of the regulator usage counter, disable the
regulator in shutdown.

Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
---
 drivers/pci/controller/dwc/pci-imx6.c | 19 +++++++------------
 1 file changed, 7 insertions(+), 12 deletions(-)

diff --git a/drivers/pci/controller/dwc/pci-imx6.c b/drivers/pci/controller/dwc/pci-imx6.c
index 368e14e9cade..c05974abd954 100644
--- a/drivers/pci/controller/dwc/pci-imx6.c
+++ b/drivers/pci/controller/dwc/pci-imx6.c
@@ -369,8 +369,6 @@ static int imx6_pcie_attach_pd(struct device *dev)
 
 static void imx6_pcie_assert_core_reset(struct imx6_pcie *imx6_pcie)
 {
-	struct device *dev = imx6_pcie->pci->dev;
-
 	switch (imx6_pcie->drvdata->variant) {
 	case IMX7D:
 	case IMX8MQ:
@@ -401,14 +399,6 @@ static void imx6_pcie_assert_core_reset(struct imx6_pcie *imx6_pcie)
 		break;
 	}
 
-	if (imx6_pcie->vpcie && regulator_is_enabled(imx6_pcie->vpcie) > 0) {
-		int ret = regulator_disable(imx6_pcie->vpcie);
-
-		if (ret)
-			dev_err(dev, "failed to disable vpcie regulator: %d\n",
-				ret);
-	}
-
 	/* Some boards don't have PCIe reset GPIO. */
 	if (gpio_is_valid(imx6_pcie->reset_gpio))
 		gpio_set_value_cansleep(imx6_pcie->reset_gpio,
@@ -585,7 +575,7 @@ static int imx6_pcie_deassert_core_reset(struct imx6_pcie *imx6_pcie)
 	struct device *dev = pci->dev;
 	int ret, err;
 
-	if (imx6_pcie->vpcie && !regulator_is_enabled(imx6_pcie->vpcie)) {
+	if (imx6_pcie->vpcie) {
 		ret = regulator_enable(imx6_pcie->vpcie);
 		if (ret) {
 			dev_err(dev, "failed to enable vpcie regulator: %d\n",
@@ -658,7 +648,7 @@ static int imx6_pcie_deassert_core_reset(struct imx6_pcie *imx6_pcie)
 	return 0;
 
 err_clks:
-	if (imx6_pcie->vpcie && regulator_is_enabled(imx6_pcie->vpcie) > 0) {
+	if (imx6_pcie->vpcie) {
 		ret = regulator_disable(imx6_pcie->vpcie);
 		if (ret)
 			dev_err(dev, "failed to disable vpcie regulator: %d\n",
@@ -1018,6 +1008,9 @@ static int imx6_pcie_suspend_noirq(struct device *dev)
 		break;
 	}
 
+	if (imx6_pcie->vpcie)
+		regulator_disable(imx6_pcie->vpcie);
+
 	return 0;
 }
 
@@ -1264,6 +1257,8 @@ static void imx6_pcie_shutdown(struct platform_device *pdev)
 
 	/* bring down link, so bootloader gets clean state in case of reboot */
 	imx6_pcie_assert_core_reset(imx6_pcie);
+	if (imx6_pcie->vpcie)
+		regulator_disable(imx6_pcie->vpcie);
 }
 
 static const struct imx6_pcie_drvdata drvdata[] = {
-- 
2.25.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  parent reply	other threads:[~2022-06-14  7:13 UTC|newest]

Thread overview: 20+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-06-14  6:58 [PATCH v11 0/8] PCI: imx6: refine codes and add the error propagation Richard Zhu
2022-06-14  6:58 ` Richard Zhu
2022-06-14  6:58 ` [PATCH v11 1/8] PCI: imx6: Encapsulate the clock enable into one standalone function Richard Zhu
2022-06-14  6:58   ` Richard Zhu
2022-06-14  6:58 ` [PATCH v11 2/8] PCI: imx6: Add the error propagation from host_init Richard Zhu
2022-06-14  6:58   ` Richard Zhu
2022-06-14  6:58 ` [PATCH v11 3/8] PCI: imx6: Move imx6_pcie_clk_disable() earlier Richard Zhu
2022-06-14  6:58   ` Richard Zhu
2022-06-14  6:58 ` [PATCH v11 4/8] PCI: imx6: Disable iMX6QDL PCIe REF clock when disable PCIe clocks Richard Zhu
2022-06-14  6:58   ` Richard Zhu
2022-06-14  6:58 ` Richard Zhu [this message]
2022-06-14  6:58   ` [PATCH v11 5/8] PCI: imx6: Turn off regulator when the system is in suspend mode Richard Zhu
2022-06-14  6:59 ` [PATCH v11 6/8] PCI: imx6: Mark the link down as none fatal error Richard Zhu
2022-06-14  6:59   ` Richard Zhu
2022-06-14  6:59 ` [PATCH v11 7/8] PCI: imx6: Reduce resume time by only starting link if it was up before suspend Richard Zhu
2022-06-14  6:59   ` Richard Zhu
2022-06-14  6:59 ` [PATCH v11 8/8] PCI: imx6: Do not hide phy driver callbacks and refine the error handling Richard Zhu
2022-06-14  6:59   ` Richard Zhu
2022-06-15 23:01 ` [PATCH v11 0/8] PCI: imx6: refine codes and add the error propagation Bjorn Helgaas
2022-06-15 23:01   ` Bjorn Helgaas

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1655189942-12678-6-git-send-email-hongxing.zhu@nxp.com \
    --to=hongxing.zhu@nxp.com \
    --cc=bhelgaas@google.com \
    --cc=broonie@kernel.org \
    --cc=festevam@gmail.com \
    --cc=francesco.dolcini@toradex.com \
    --cc=kernel@pengutronix.de \
    --cc=l.stach@pengutronix.de \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-imx@nxp.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=lorenzo.pieralisi@arm.com \
    --cc=robh+dt@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.