All of lore.kernel.org
 help / color / mirror / Atom feed
From: Richard Zhu <hongxing.zhu@nxp.com>
To: l.stach@pengutronix.de, bhelgaas@google.com, robh+dt@kernel.org,
	broonie@kernel.org, lorenzo.pieralisi@arm.com,
	festevam@gmail.com, francesco.dolcini@toradex.com
Cc: hongxing.zhu@nxp.com, linux-pci@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org, kernel@pengutronix.de,
	linux-imx@nxp.com
Subject: [PATCH v11 7/8] PCI: imx6: Reduce resume time by only starting link if it was up before suspend
Date: Tue, 14 Jun 2022 14:59:01 +0800	[thread overview]
Message-ID: <1655189942-12678-8-git-send-email-hongxing.zhu@nxp.com> (raw)
In-Reply-To: <1655189942-12678-1-git-send-email-hongxing.zhu@nxp.com>

Because i.MX PCIe doesn't support hot-plug feature.
In the link down scenario, only start the PCIe link training in resume
when the link is up before system suspend to avoid the long latency in
the link training period.

Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
---
 drivers/pci/controller/dwc/pci-imx6.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/pci/controller/dwc/pci-imx6.c b/drivers/pci/controller/dwc/pci-imx6.c
index 68d0bd703bbd..6a55bc395a2c 100644
--- a/drivers/pci/controller/dwc/pci-imx6.c
+++ b/drivers/pci/controller/dwc/pci-imx6.c
@@ -67,6 +67,7 @@ struct imx6_pcie {
 	struct dw_pcie		*pci;
 	int			reset_gpio;
 	bool			gpio_active_high;
+	bool			link_is_up;
 	struct clk		*pcie_bus;
 	struct clk		*pcie_phy;
 	struct clk		*pcie_inbound_axi;
@@ -895,6 +896,7 @@ static int imx6_pcie_start_link(struct dw_pcie *pci)
 		dev_info(dev, "Link: Gen2 disabled\n");
 	}
 
+	imx6_pcie->link_is_up = true;
 	tmp = dw_pcie_readw_dbi(pci, offset + PCI_EXP_LNKSTA);
 	dev_info(dev, "Link up, Gen%i\n", tmp & PCI_EXP_LNKSTA_CLS);
 	return 0;
@@ -1031,10 +1033,8 @@ static int imx6_pcie_resume_noirq(struct device *dev)
 	imx6_pcie_init_phy(imx6_pcie);
 	imx6_pcie_deassert_core_reset(imx6_pcie);
 	dw_pcie_setup_rc(pp);
-
-	ret = imx6_pcie_start_link(imx6_pcie->pci);
-	if (ret < 0)
-		dev_info(dev, "pcie link is down after resume.\n");
+	if (imx6_pcie->link_is_up)
+		imx6_pcie_start_link(imx6_pcie->pci);
 
 	return 0;
 }
-- 
2.25.1


WARNING: multiple messages have this Message-ID (diff)
From: Richard Zhu <hongxing.zhu@nxp.com>
To: l.stach@pengutronix.de, bhelgaas@google.com, robh+dt@kernel.org,
	broonie@kernel.org, lorenzo.pieralisi@arm.com,
	festevam@gmail.com, francesco.dolcini@toradex.com
Cc: hongxing.zhu@nxp.com, linux-pci@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org, kernel@pengutronix.de,
	linux-imx@nxp.com
Subject: [PATCH v11 7/8] PCI: imx6: Reduce resume time by only starting link if it was up before suspend
Date: Tue, 14 Jun 2022 14:59:01 +0800	[thread overview]
Message-ID: <1655189942-12678-8-git-send-email-hongxing.zhu@nxp.com> (raw)
In-Reply-To: <1655189942-12678-1-git-send-email-hongxing.zhu@nxp.com>

Because i.MX PCIe doesn't support hot-plug feature.
In the link down scenario, only start the PCIe link training in resume
when the link is up before system suspend to avoid the long latency in
the link training period.

Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
---
 drivers/pci/controller/dwc/pci-imx6.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/pci/controller/dwc/pci-imx6.c b/drivers/pci/controller/dwc/pci-imx6.c
index 68d0bd703bbd..6a55bc395a2c 100644
--- a/drivers/pci/controller/dwc/pci-imx6.c
+++ b/drivers/pci/controller/dwc/pci-imx6.c
@@ -67,6 +67,7 @@ struct imx6_pcie {
 	struct dw_pcie		*pci;
 	int			reset_gpio;
 	bool			gpio_active_high;
+	bool			link_is_up;
 	struct clk		*pcie_bus;
 	struct clk		*pcie_phy;
 	struct clk		*pcie_inbound_axi;
@@ -895,6 +896,7 @@ static int imx6_pcie_start_link(struct dw_pcie *pci)
 		dev_info(dev, "Link: Gen2 disabled\n");
 	}
 
+	imx6_pcie->link_is_up = true;
 	tmp = dw_pcie_readw_dbi(pci, offset + PCI_EXP_LNKSTA);
 	dev_info(dev, "Link up, Gen%i\n", tmp & PCI_EXP_LNKSTA_CLS);
 	return 0;
@@ -1031,10 +1033,8 @@ static int imx6_pcie_resume_noirq(struct device *dev)
 	imx6_pcie_init_phy(imx6_pcie);
 	imx6_pcie_deassert_core_reset(imx6_pcie);
 	dw_pcie_setup_rc(pp);
-
-	ret = imx6_pcie_start_link(imx6_pcie->pci);
-	if (ret < 0)
-		dev_info(dev, "pcie link is down after resume.\n");
+	if (imx6_pcie->link_is_up)
+		imx6_pcie_start_link(imx6_pcie->pci);
 
 	return 0;
 }
-- 
2.25.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  parent reply	other threads:[~2022-06-14  7:15 UTC|newest]

Thread overview: 20+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-06-14  6:58 [PATCH v11 0/8] PCI: imx6: refine codes and add the error propagation Richard Zhu
2022-06-14  6:58 ` Richard Zhu
2022-06-14  6:58 ` [PATCH v11 1/8] PCI: imx6: Encapsulate the clock enable into one standalone function Richard Zhu
2022-06-14  6:58   ` Richard Zhu
2022-06-14  6:58 ` [PATCH v11 2/8] PCI: imx6: Add the error propagation from host_init Richard Zhu
2022-06-14  6:58   ` Richard Zhu
2022-06-14  6:58 ` [PATCH v11 3/8] PCI: imx6: Move imx6_pcie_clk_disable() earlier Richard Zhu
2022-06-14  6:58   ` Richard Zhu
2022-06-14  6:58 ` [PATCH v11 4/8] PCI: imx6: Disable iMX6QDL PCIe REF clock when disable PCIe clocks Richard Zhu
2022-06-14  6:58   ` Richard Zhu
2022-06-14  6:58 ` [PATCH v11 5/8] PCI: imx6: Turn off regulator when the system is in suspend mode Richard Zhu
2022-06-14  6:58   ` Richard Zhu
2022-06-14  6:59 ` [PATCH v11 6/8] PCI: imx6: Mark the link down as none fatal error Richard Zhu
2022-06-14  6:59   ` Richard Zhu
2022-06-14  6:59 ` Richard Zhu [this message]
2022-06-14  6:59   ` [PATCH v11 7/8] PCI: imx6: Reduce resume time by only starting link if it was up before suspend Richard Zhu
2022-06-14  6:59 ` [PATCH v11 8/8] PCI: imx6: Do not hide phy driver callbacks and refine the error handling Richard Zhu
2022-06-14  6:59   ` Richard Zhu
2022-06-15 23:01 ` [PATCH v11 0/8] PCI: imx6: refine codes and add the error propagation Bjorn Helgaas
2022-06-15 23:01   ` Bjorn Helgaas

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1655189942-12678-8-git-send-email-hongxing.zhu@nxp.com \
    --to=hongxing.zhu@nxp.com \
    --cc=bhelgaas@google.com \
    --cc=broonie@kernel.org \
    --cc=festevam@gmail.com \
    --cc=francesco.dolcini@toradex.com \
    --cc=kernel@pengutronix.de \
    --cc=l.stach@pengutronix.de \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-imx@nxp.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=lorenzo.pieralisi@arm.com \
    --cc=robh+dt@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.