All of lore.kernel.org
 help / color / mirror / Atom feed
From: Richard Zhu <hongxing.zhu@nxp.com>
To: p.zabel@pengutronix.de, l.stach@pengutronix.de,
	bhelgaas@google.com, lorenzo.pieralisi@arm.com, robh@kernel.org,
	shawnguo@kernel.org, vkoul@kernel.org,
	alexander.stein@ew.tq-group.com, marex@denx.de,
	richard.leitner@linux.dev
Cc: linux-phy@lists.infradead.org, devicetree@vger.kernel.org,
	linux-pci@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org, kernel@pengutronix.de,
	linux-imx@nxp.com, Richard Zhu <hongxing.zhu@nxp.com>
Subject: [PATCH v5 6/7] phy: freescale: imx8m-pcie: Add iMX8MP PCIe PHY support
Date: Tue, 30 Aug 2022 15:46:03 +0800	[thread overview]
Message-ID: <1661845564-11373-7-git-send-email-hongxing.zhu@nxp.com> (raw)
In-Reply-To: <1661845564-11373-1-git-send-email-hongxing.zhu@nxp.com>

Add i.MX8MP PCIe PHY support.

Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Tested-by: Marek Vasut <marex@denx.de>
Tested-by: Richard Leitner <richard.leitner@skidata.com>
Tested-by: Alexander Stein <alexander.stein@ew.tq-group.com>
---
 drivers/phy/freescale/phy-fsl-imx8m-pcie.c | 137 +++++++++++++--------
 1 file changed, 89 insertions(+), 48 deletions(-)

diff --git a/drivers/phy/freescale/phy-fsl-imx8m-pcie.c b/drivers/phy/freescale/phy-fsl-imx8m-pcie.c
index ad7d2edfc414..c76e3a1a5f51 100644
--- a/drivers/phy/freescale/phy-fsl-imx8m-pcie.c
+++ b/drivers/phy/freescale/phy-fsl-imx8m-pcie.c
@@ -11,6 +11,9 @@
 #include <linux/mfd/syscon.h>
 #include <linux/mfd/syscon/imx7-iomuxc-gpr.h>
 #include <linux/module.h>
+#include <linux/of_address.h>
+#include <linux/of_device.h>
+#include <linux/of_device.h>
 #include <linux/phy/phy.h>
 #include <linux/platform_device.h>
 #include <linux/regmap.h>
@@ -31,12 +34,10 @@
 #define IMX8MM_PCIE_PHY_CMN_REG065	0x194
 #define  ANA_AUX_RX_TERM		(BIT(7) | BIT(4))
 #define  ANA_AUX_TX_LVL			GENMASK(3, 0)
-#define IMX8MM_PCIE_PHY_CMN_REG75	0x1D4
-#define  PCIE_PHY_CMN_REG75_PLL_DONE	0x3
+#define IMX8MM_PCIE_PHY_CMN_REG075	0x1D4
+#define  ANA_PLL_DONE			0x3
 #define PCIE_PHY_TRSV_REG5		0x414
-#define  PCIE_PHY_TRSV_REG5_GEN1_DEEMP	0x2D
 #define PCIE_PHY_TRSV_REG6		0x418
-#define  PCIE_PHY_TRSV_REG6_GEN2_DEEMP	0xF
 
 #define IMX8MM_GPR_PCIE_REF_CLK_SEL	GENMASK(25, 24)
 #define IMX8MM_GPR_PCIE_REF_CLK_PLL	FIELD_PREP(IMX8MM_GPR_PCIE_REF_CLK_SEL, 0x3)
@@ -47,16 +48,23 @@
 #define IMX8MM_GPR_PCIE_SSC_EN		BIT(16)
 #define IMX8MM_GPR_PCIE_AUX_EN_OVERRIDE	BIT(9)
 
+enum imx8_pcie_phy_type {
+	IMX8MM,
+	IMX8MP,
+};
+
 struct imx8_pcie_phy {
 	void __iomem		*base;
 	struct clk		*clk;
 	struct phy		*phy;
 	struct regmap		*iomuxc_gpr;
 	struct reset_control	*reset;
+	struct reset_control	*perst;
 	u32			refclk_pad_mode;
 	u32			tx_deemph_gen1;
 	u32			tx_deemph_gen2;
 	bool			clkreq_unused;
+	enum imx8_pcie_phy_type	variant;
 };
 
 static int imx8_pcie_phy_init(struct phy *phy)
@@ -68,31 +76,20 @@ static int imx8_pcie_phy_init(struct phy *phy)
 	reset_control_assert(imx8_phy->reset);
 
 	pad_mode = imx8_phy->refclk_pad_mode;
-	/* Set AUX_EN_OVERRIDE 1'b0, when the CLKREQ# isn't hooked */
-	regmap_update_bits(imx8_phy->iomuxc_gpr, IOMUXC_GPR14,
-			   IMX8MM_GPR_PCIE_AUX_EN_OVERRIDE,
-			   imx8_phy->clkreq_unused ?
-			   0 : IMX8MM_GPR_PCIE_AUX_EN_OVERRIDE);
-	regmap_update_bits(imx8_phy->iomuxc_gpr, IOMUXC_GPR14,
-			   IMX8MM_GPR_PCIE_AUX_EN,
-			   IMX8MM_GPR_PCIE_AUX_EN);
-	regmap_update_bits(imx8_phy->iomuxc_gpr, IOMUXC_GPR14,
-			   IMX8MM_GPR_PCIE_POWER_OFF, 0);
-	regmap_update_bits(imx8_phy->iomuxc_gpr, IOMUXC_GPR14,
-			   IMX8MM_GPR_PCIE_SSC_EN, 0);
-
-	regmap_update_bits(imx8_phy->iomuxc_gpr, IOMUXC_GPR14,
-			   IMX8MM_GPR_PCIE_REF_CLK_SEL,
-			   pad_mode == IMX8_PCIE_REFCLK_PAD_INPUT ?
-			   IMX8MM_GPR_PCIE_REF_CLK_EXT :
-			   IMX8MM_GPR_PCIE_REF_CLK_PLL);
-	usleep_range(100, 200);
-
-	/* Do the PHY common block reset */
-	regmap_update_bits(imx8_phy->iomuxc_gpr, IOMUXC_GPR14,
-			   IMX8MM_GPR_PCIE_CMN_RST,
-			   IMX8MM_GPR_PCIE_CMN_RST);
-	usleep_range(200, 500);
+	switch (imx8_phy->variant) {
+	case IMX8MM:
+		/* Tune PHY de-emphasis setting to pass PCIe compliance. */
+		if (imx8_phy->tx_deemph_gen1)
+			writel(imx8_phy->tx_deemph_gen1,
+			       imx8_phy->base + PCIE_PHY_TRSV_REG5);
+		if (imx8_phy->tx_deemph_gen2)
+			writel(imx8_phy->tx_deemph_gen2,
+			       imx8_phy->base + PCIE_PHY_TRSV_REG6);
+		break;
+	case IMX8MP:
+		reset_control_assert(imx8_phy->perst);
+		break;
+	}
 
 	if (pad_mode == IMX8_PCIE_REFCLK_PAD_INPUT ||
 	    pad_mode == IMX8_PCIE_REFCLK_PAD_UNUSED) {
@@ -120,20 +117,44 @@ static int imx8_pcie_phy_init(struct phy *phy)
 		       imx8_phy->base + IMX8MM_PCIE_PHY_CMN_REG065);
 	}
 
-	/* Tune PHY de-emphasis setting to pass PCIe compliance. */
-	if (imx8_phy->tx_deemph_gen1)
-		writel(imx8_phy->tx_deemph_gen1,
-		       imx8_phy->base + PCIE_PHY_TRSV_REG5);
-	if (imx8_phy->tx_deemph_gen2)
-		writel(imx8_phy->tx_deemph_gen2,
-		       imx8_phy->base + PCIE_PHY_TRSV_REG6);
+	/* Set AUX_EN_OVERRIDE 1'b0, when the CLKREQ# isn't hooked */
+	regmap_update_bits(imx8_phy->iomuxc_gpr, IOMUXC_GPR14,
+			   IMX8MM_GPR_PCIE_AUX_EN_OVERRIDE,
+			   imx8_phy->clkreq_unused ?
+			   0 : IMX8MM_GPR_PCIE_AUX_EN_OVERRIDE);
+	regmap_update_bits(imx8_phy->iomuxc_gpr, IOMUXC_GPR14,
+			   IMX8MM_GPR_PCIE_AUX_EN,
+			   IMX8MM_GPR_PCIE_AUX_EN);
+	regmap_update_bits(imx8_phy->iomuxc_gpr, IOMUXC_GPR14,
+			   IMX8MM_GPR_PCIE_POWER_OFF, 0);
+	regmap_update_bits(imx8_phy->iomuxc_gpr, IOMUXC_GPR14,
+			   IMX8MM_GPR_PCIE_SSC_EN, 0);
+
+	regmap_update_bits(imx8_phy->iomuxc_gpr, IOMUXC_GPR14,
+			   IMX8MM_GPR_PCIE_REF_CLK_SEL,
+			   pad_mode == IMX8_PCIE_REFCLK_PAD_INPUT ?
+			   IMX8MM_GPR_PCIE_REF_CLK_EXT :
+			   IMX8MM_GPR_PCIE_REF_CLK_PLL);
+	usleep_range(100, 200);
+
+	/* Do the PHY common block reset */
+	regmap_update_bits(imx8_phy->iomuxc_gpr, IOMUXC_GPR14,
+			   IMX8MM_GPR_PCIE_CMN_RST,
+			   IMX8MM_GPR_PCIE_CMN_RST);
 
-	reset_control_deassert(imx8_phy->reset);
+	switch (imx8_phy->variant) {
+	case IMX8MP:
+		reset_control_deassert(imx8_phy->perst);
+		fallthrough;
+	case IMX8MM:
+		reset_control_deassert(imx8_phy->reset);
+		usleep_range(200, 500);
+		break;
+	}
 
 	/* Polling to check the phy is ready or not. */
-	ret = readl_poll_timeout(imx8_phy->base + IMX8MM_PCIE_PHY_CMN_REG75,
-				 val, val == PCIE_PHY_CMN_REG75_PLL_DONE,
-				 10, 20000);
+	ret = readl_poll_timeout(imx8_phy->base + IMX8MM_PCIE_PHY_CMN_REG075,
+				 val, val == ANA_PLL_DONE, 10, 20000);
 	return ret;
 }
 
@@ -160,6 +181,13 @@ static const struct phy_ops imx8_pcie_phy_ops = {
 	.owner		= THIS_MODULE,
 };
 
+static const struct of_device_id imx8_pcie_phy_of_match[] = {
+	{.compatible = "fsl,imx8mm-pcie-phy", .data = (void *)IMX8MM},
+	{.compatible = "fsl,imx8mp-pcie-phy", .data = (void *)IMX8MP},
+	{ },
+};
+MODULE_DEVICE_TABLE(of, imx8_pcie_phy_of_match);
+
 static int imx8_pcie_phy_probe(struct platform_device *pdev)
 {
 	struct phy_provider *phy_provider;
@@ -172,6 +200,9 @@ static int imx8_pcie_phy_probe(struct platform_device *pdev)
 	if (!imx8_phy)
 		return -ENOMEM;
 
+	imx8_phy->variant =
+		(enum imx8_pcie_phy_type)of_device_get_match_data(dev);
+
 	/* get PHY refclk pad mode */
 	of_property_read_u32(np, "fsl,refclk-pad-mode",
 			     &imx8_phy->refclk_pad_mode);
@@ -196,8 +227,16 @@ static int imx8_pcie_phy_probe(struct platform_device *pdev)
 	}
 
 	/* Grab GPR config register range */
-	imx8_phy->iomuxc_gpr =
-		 syscon_regmap_lookup_by_compatible("fsl,imx6q-iomuxc-gpr");
+	switch (imx8_phy->variant) {
+	case IMX8MM:
+		imx8_phy->iomuxc_gpr =
+			 syscon_regmap_lookup_by_compatible("fsl,imx8mm-iomuxc-gpr");
+		break;
+	case IMX8MP:
+		imx8_phy->iomuxc_gpr =
+			 syscon_regmap_lookup_by_compatible("fsl,imx8mp-iomuxc-gpr");
+		break;
+	}
 	if (IS_ERR(imx8_phy->iomuxc_gpr)) {
 		dev_err(dev, "unable to find iomuxc registers\n");
 		return PTR_ERR(imx8_phy->iomuxc_gpr);
@@ -208,6 +247,14 @@ static int imx8_pcie_phy_probe(struct platform_device *pdev)
 		dev_err(dev, "Failed to get PCIEPHY reset control\n");
 		return PTR_ERR(imx8_phy->reset);
 	}
+	if (imx8_phy->variant == IMX8MP) {
+		imx8_phy->perst =
+			devm_reset_control_get_exclusive(dev, "perst");
+		if (IS_ERR(imx8_phy->perst)) {
+			dev_err(dev, "Failed to get PCIE PHY PERST control\n");
+			return PTR_ERR(imx8_phy->perst);
+		}
+	}
 
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	imx8_phy->base = devm_ioremap_resource(dev, res);
@@ -225,12 +272,6 @@ static int imx8_pcie_phy_probe(struct platform_device *pdev)
 	return PTR_ERR_OR_ZERO(phy_provider);
 }
 
-static const struct of_device_id imx8_pcie_phy_of_match[] = {
-	{.compatible = "fsl,imx8mm-pcie-phy",},
-	{ },
-};
-MODULE_DEVICE_TABLE(of, imx8_pcie_phy_of_match);
-
 static struct platform_driver imx8_pcie_phy_driver = {
 	.probe	= imx8_pcie_phy_probe,
 	.driver = {
-- 
2.25.1


WARNING: multiple messages have this Message-ID (diff)
From: Richard Zhu <hongxing.zhu@nxp.com>
To: p.zabel@pengutronix.de, l.stach@pengutronix.de,
	bhelgaas@google.com, lorenzo.pieralisi@arm.com, robh@kernel.org,
	shawnguo@kernel.org, vkoul@kernel.org,
	alexander.stein@ew.tq-group.com, marex@denx.de,
	richard.leitner@linux.dev
Cc: linux-phy@lists.infradead.org, devicetree@vger.kernel.org,
	linux-pci@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org, kernel@pengutronix.de,
	linux-imx@nxp.com, Richard Zhu <hongxing.zhu@nxp.com>
Subject: [PATCH v5 6/7] phy: freescale: imx8m-pcie: Add iMX8MP PCIe PHY support
Date: Tue, 30 Aug 2022 15:46:03 +0800	[thread overview]
Message-ID: <1661845564-11373-7-git-send-email-hongxing.zhu@nxp.com> (raw)
In-Reply-To: <1661845564-11373-1-git-send-email-hongxing.zhu@nxp.com>

Add i.MX8MP PCIe PHY support.

Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Tested-by: Marek Vasut <marex@denx.de>
Tested-by: Richard Leitner <richard.leitner@skidata.com>
Tested-by: Alexander Stein <alexander.stein@ew.tq-group.com>
---
 drivers/phy/freescale/phy-fsl-imx8m-pcie.c | 137 +++++++++++++--------
 1 file changed, 89 insertions(+), 48 deletions(-)

diff --git a/drivers/phy/freescale/phy-fsl-imx8m-pcie.c b/drivers/phy/freescale/phy-fsl-imx8m-pcie.c
index ad7d2edfc414..c76e3a1a5f51 100644
--- a/drivers/phy/freescale/phy-fsl-imx8m-pcie.c
+++ b/drivers/phy/freescale/phy-fsl-imx8m-pcie.c
@@ -11,6 +11,9 @@
 #include <linux/mfd/syscon.h>
 #include <linux/mfd/syscon/imx7-iomuxc-gpr.h>
 #include <linux/module.h>
+#include <linux/of_address.h>
+#include <linux/of_device.h>
+#include <linux/of_device.h>
 #include <linux/phy/phy.h>
 #include <linux/platform_device.h>
 #include <linux/regmap.h>
@@ -31,12 +34,10 @@
 #define IMX8MM_PCIE_PHY_CMN_REG065	0x194
 #define  ANA_AUX_RX_TERM		(BIT(7) | BIT(4))
 #define  ANA_AUX_TX_LVL			GENMASK(3, 0)
-#define IMX8MM_PCIE_PHY_CMN_REG75	0x1D4
-#define  PCIE_PHY_CMN_REG75_PLL_DONE	0x3
+#define IMX8MM_PCIE_PHY_CMN_REG075	0x1D4
+#define  ANA_PLL_DONE			0x3
 #define PCIE_PHY_TRSV_REG5		0x414
-#define  PCIE_PHY_TRSV_REG5_GEN1_DEEMP	0x2D
 #define PCIE_PHY_TRSV_REG6		0x418
-#define  PCIE_PHY_TRSV_REG6_GEN2_DEEMP	0xF
 
 #define IMX8MM_GPR_PCIE_REF_CLK_SEL	GENMASK(25, 24)
 #define IMX8MM_GPR_PCIE_REF_CLK_PLL	FIELD_PREP(IMX8MM_GPR_PCIE_REF_CLK_SEL, 0x3)
@@ -47,16 +48,23 @@
 #define IMX8MM_GPR_PCIE_SSC_EN		BIT(16)
 #define IMX8MM_GPR_PCIE_AUX_EN_OVERRIDE	BIT(9)
 
+enum imx8_pcie_phy_type {
+	IMX8MM,
+	IMX8MP,
+};
+
 struct imx8_pcie_phy {
 	void __iomem		*base;
 	struct clk		*clk;
 	struct phy		*phy;
 	struct regmap		*iomuxc_gpr;
 	struct reset_control	*reset;
+	struct reset_control	*perst;
 	u32			refclk_pad_mode;
 	u32			tx_deemph_gen1;
 	u32			tx_deemph_gen2;
 	bool			clkreq_unused;
+	enum imx8_pcie_phy_type	variant;
 };
 
 static int imx8_pcie_phy_init(struct phy *phy)
@@ -68,31 +76,20 @@ static int imx8_pcie_phy_init(struct phy *phy)
 	reset_control_assert(imx8_phy->reset);
 
 	pad_mode = imx8_phy->refclk_pad_mode;
-	/* Set AUX_EN_OVERRIDE 1'b0, when the CLKREQ# isn't hooked */
-	regmap_update_bits(imx8_phy->iomuxc_gpr, IOMUXC_GPR14,
-			   IMX8MM_GPR_PCIE_AUX_EN_OVERRIDE,
-			   imx8_phy->clkreq_unused ?
-			   0 : IMX8MM_GPR_PCIE_AUX_EN_OVERRIDE);
-	regmap_update_bits(imx8_phy->iomuxc_gpr, IOMUXC_GPR14,
-			   IMX8MM_GPR_PCIE_AUX_EN,
-			   IMX8MM_GPR_PCIE_AUX_EN);
-	regmap_update_bits(imx8_phy->iomuxc_gpr, IOMUXC_GPR14,
-			   IMX8MM_GPR_PCIE_POWER_OFF, 0);
-	regmap_update_bits(imx8_phy->iomuxc_gpr, IOMUXC_GPR14,
-			   IMX8MM_GPR_PCIE_SSC_EN, 0);
-
-	regmap_update_bits(imx8_phy->iomuxc_gpr, IOMUXC_GPR14,
-			   IMX8MM_GPR_PCIE_REF_CLK_SEL,
-			   pad_mode == IMX8_PCIE_REFCLK_PAD_INPUT ?
-			   IMX8MM_GPR_PCIE_REF_CLK_EXT :
-			   IMX8MM_GPR_PCIE_REF_CLK_PLL);
-	usleep_range(100, 200);
-
-	/* Do the PHY common block reset */
-	regmap_update_bits(imx8_phy->iomuxc_gpr, IOMUXC_GPR14,
-			   IMX8MM_GPR_PCIE_CMN_RST,
-			   IMX8MM_GPR_PCIE_CMN_RST);
-	usleep_range(200, 500);
+	switch (imx8_phy->variant) {
+	case IMX8MM:
+		/* Tune PHY de-emphasis setting to pass PCIe compliance. */
+		if (imx8_phy->tx_deemph_gen1)
+			writel(imx8_phy->tx_deemph_gen1,
+			       imx8_phy->base + PCIE_PHY_TRSV_REG5);
+		if (imx8_phy->tx_deemph_gen2)
+			writel(imx8_phy->tx_deemph_gen2,
+			       imx8_phy->base + PCIE_PHY_TRSV_REG6);
+		break;
+	case IMX8MP:
+		reset_control_assert(imx8_phy->perst);
+		break;
+	}
 
 	if (pad_mode == IMX8_PCIE_REFCLK_PAD_INPUT ||
 	    pad_mode == IMX8_PCIE_REFCLK_PAD_UNUSED) {
@@ -120,20 +117,44 @@ static int imx8_pcie_phy_init(struct phy *phy)
 		       imx8_phy->base + IMX8MM_PCIE_PHY_CMN_REG065);
 	}
 
-	/* Tune PHY de-emphasis setting to pass PCIe compliance. */
-	if (imx8_phy->tx_deemph_gen1)
-		writel(imx8_phy->tx_deemph_gen1,
-		       imx8_phy->base + PCIE_PHY_TRSV_REG5);
-	if (imx8_phy->tx_deemph_gen2)
-		writel(imx8_phy->tx_deemph_gen2,
-		       imx8_phy->base + PCIE_PHY_TRSV_REG6);
+	/* Set AUX_EN_OVERRIDE 1'b0, when the CLKREQ# isn't hooked */
+	regmap_update_bits(imx8_phy->iomuxc_gpr, IOMUXC_GPR14,
+			   IMX8MM_GPR_PCIE_AUX_EN_OVERRIDE,
+			   imx8_phy->clkreq_unused ?
+			   0 : IMX8MM_GPR_PCIE_AUX_EN_OVERRIDE);
+	regmap_update_bits(imx8_phy->iomuxc_gpr, IOMUXC_GPR14,
+			   IMX8MM_GPR_PCIE_AUX_EN,
+			   IMX8MM_GPR_PCIE_AUX_EN);
+	regmap_update_bits(imx8_phy->iomuxc_gpr, IOMUXC_GPR14,
+			   IMX8MM_GPR_PCIE_POWER_OFF, 0);
+	regmap_update_bits(imx8_phy->iomuxc_gpr, IOMUXC_GPR14,
+			   IMX8MM_GPR_PCIE_SSC_EN, 0);
+
+	regmap_update_bits(imx8_phy->iomuxc_gpr, IOMUXC_GPR14,
+			   IMX8MM_GPR_PCIE_REF_CLK_SEL,
+			   pad_mode == IMX8_PCIE_REFCLK_PAD_INPUT ?
+			   IMX8MM_GPR_PCIE_REF_CLK_EXT :
+			   IMX8MM_GPR_PCIE_REF_CLK_PLL);
+	usleep_range(100, 200);
+
+	/* Do the PHY common block reset */
+	regmap_update_bits(imx8_phy->iomuxc_gpr, IOMUXC_GPR14,
+			   IMX8MM_GPR_PCIE_CMN_RST,
+			   IMX8MM_GPR_PCIE_CMN_RST);
 
-	reset_control_deassert(imx8_phy->reset);
+	switch (imx8_phy->variant) {
+	case IMX8MP:
+		reset_control_deassert(imx8_phy->perst);
+		fallthrough;
+	case IMX8MM:
+		reset_control_deassert(imx8_phy->reset);
+		usleep_range(200, 500);
+		break;
+	}
 
 	/* Polling to check the phy is ready or not. */
-	ret = readl_poll_timeout(imx8_phy->base + IMX8MM_PCIE_PHY_CMN_REG75,
-				 val, val == PCIE_PHY_CMN_REG75_PLL_DONE,
-				 10, 20000);
+	ret = readl_poll_timeout(imx8_phy->base + IMX8MM_PCIE_PHY_CMN_REG075,
+				 val, val == ANA_PLL_DONE, 10, 20000);
 	return ret;
 }
 
@@ -160,6 +181,13 @@ static const struct phy_ops imx8_pcie_phy_ops = {
 	.owner		= THIS_MODULE,
 };
 
+static const struct of_device_id imx8_pcie_phy_of_match[] = {
+	{.compatible = "fsl,imx8mm-pcie-phy", .data = (void *)IMX8MM},
+	{.compatible = "fsl,imx8mp-pcie-phy", .data = (void *)IMX8MP},
+	{ },
+};
+MODULE_DEVICE_TABLE(of, imx8_pcie_phy_of_match);
+
 static int imx8_pcie_phy_probe(struct platform_device *pdev)
 {
 	struct phy_provider *phy_provider;
@@ -172,6 +200,9 @@ static int imx8_pcie_phy_probe(struct platform_device *pdev)
 	if (!imx8_phy)
 		return -ENOMEM;
 
+	imx8_phy->variant =
+		(enum imx8_pcie_phy_type)of_device_get_match_data(dev);
+
 	/* get PHY refclk pad mode */
 	of_property_read_u32(np, "fsl,refclk-pad-mode",
 			     &imx8_phy->refclk_pad_mode);
@@ -196,8 +227,16 @@ static int imx8_pcie_phy_probe(struct platform_device *pdev)
 	}
 
 	/* Grab GPR config register range */
-	imx8_phy->iomuxc_gpr =
-		 syscon_regmap_lookup_by_compatible("fsl,imx6q-iomuxc-gpr");
+	switch (imx8_phy->variant) {
+	case IMX8MM:
+		imx8_phy->iomuxc_gpr =
+			 syscon_regmap_lookup_by_compatible("fsl,imx8mm-iomuxc-gpr");
+		break;
+	case IMX8MP:
+		imx8_phy->iomuxc_gpr =
+			 syscon_regmap_lookup_by_compatible("fsl,imx8mp-iomuxc-gpr");
+		break;
+	}
 	if (IS_ERR(imx8_phy->iomuxc_gpr)) {
 		dev_err(dev, "unable to find iomuxc registers\n");
 		return PTR_ERR(imx8_phy->iomuxc_gpr);
@@ -208,6 +247,14 @@ static int imx8_pcie_phy_probe(struct platform_device *pdev)
 		dev_err(dev, "Failed to get PCIEPHY reset control\n");
 		return PTR_ERR(imx8_phy->reset);
 	}
+	if (imx8_phy->variant == IMX8MP) {
+		imx8_phy->perst =
+			devm_reset_control_get_exclusive(dev, "perst");
+		if (IS_ERR(imx8_phy->perst)) {
+			dev_err(dev, "Failed to get PCIE PHY PERST control\n");
+			return PTR_ERR(imx8_phy->perst);
+		}
+	}
 
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	imx8_phy->base = devm_ioremap_resource(dev, res);
@@ -225,12 +272,6 @@ static int imx8_pcie_phy_probe(struct platform_device *pdev)
 	return PTR_ERR_OR_ZERO(phy_provider);
 }
 
-static const struct of_device_id imx8_pcie_phy_of_match[] = {
-	{.compatible = "fsl,imx8mm-pcie-phy",},
-	{ },
-};
-MODULE_DEVICE_TABLE(of, imx8_pcie_phy_of_match);
-
 static struct platform_driver imx8_pcie_phy_driver = {
 	.probe	= imx8_pcie_phy_probe,
 	.driver = {
-- 
2.25.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

WARNING: multiple messages have this Message-ID (diff)
From: Richard Zhu <hongxing.zhu@nxp.com>
To: p.zabel@pengutronix.de, l.stach@pengutronix.de,
	bhelgaas@google.com, lorenzo.pieralisi@arm.com, robh@kernel.org,
	shawnguo@kernel.org, vkoul@kernel.org,
	alexander.stein@ew.tq-group.com, marex@denx.de,
	richard.leitner@linux.dev
Cc: linux-phy@lists.infradead.org, devicetree@vger.kernel.org,
	linux-pci@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org, kernel@pengutronix.de,
	linux-imx@nxp.com, Richard Zhu <hongxing.zhu@nxp.com>
Subject: [PATCH v5 6/7] phy: freescale: imx8m-pcie: Add iMX8MP PCIe PHY support
Date: Tue, 30 Aug 2022 15:46:03 +0800	[thread overview]
Message-ID: <1661845564-11373-7-git-send-email-hongxing.zhu@nxp.com> (raw)
In-Reply-To: <1661845564-11373-1-git-send-email-hongxing.zhu@nxp.com>

Add i.MX8MP PCIe PHY support.

Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Tested-by: Marek Vasut <marex@denx.de>
Tested-by: Richard Leitner <richard.leitner@skidata.com>
Tested-by: Alexander Stein <alexander.stein@ew.tq-group.com>
---
 drivers/phy/freescale/phy-fsl-imx8m-pcie.c | 137 +++++++++++++--------
 1 file changed, 89 insertions(+), 48 deletions(-)

diff --git a/drivers/phy/freescale/phy-fsl-imx8m-pcie.c b/drivers/phy/freescale/phy-fsl-imx8m-pcie.c
index ad7d2edfc414..c76e3a1a5f51 100644
--- a/drivers/phy/freescale/phy-fsl-imx8m-pcie.c
+++ b/drivers/phy/freescale/phy-fsl-imx8m-pcie.c
@@ -11,6 +11,9 @@
 #include <linux/mfd/syscon.h>
 #include <linux/mfd/syscon/imx7-iomuxc-gpr.h>
 #include <linux/module.h>
+#include <linux/of_address.h>
+#include <linux/of_device.h>
+#include <linux/of_device.h>
 #include <linux/phy/phy.h>
 #include <linux/platform_device.h>
 #include <linux/regmap.h>
@@ -31,12 +34,10 @@
 #define IMX8MM_PCIE_PHY_CMN_REG065	0x194
 #define  ANA_AUX_RX_TERM		(BIT(7) | BIT(4))
 #define  ANA_AUX_TX_LVL			GENMASK(3, 0)
-#define IMX8MM_PCIE_PHY_CMN_REG75	0x1D4
-#define  PCIE_PHY_CMN_REG75_PLL_DONE	0x3
+#define IMX8MM_PCIE_PHY_CMN_REG075	0x1D4
+#define  ANA_PLL_DONE			0x3
 #define PCIE_PHY_TRSV_REG5		0x414
-#define  PCIE_PHY_TRSV_REG5_GEN1_DEEMP	0x2D
 #define PCIE_PHY_TRSV_REG6		0x418
-#define  PCIE_PHY_TRSV_REG6_GEN2_DEEMP	0xF
 
 #define IMX8MM_GPR_PCIE_REF_CLK_SEL	GENMASK(25, 24)
 #define IMX8MM_GPR_PCIE_REF_CLK_PLL	FIELD_PREP(IMX8MM_GPR_PCIE_REF_CLK_SEL, 0x3)
@@ -47,16 +48,23 @@
 #define IMX8MM_GPR_PCIE_SSC_EN		BIT(16)
 #define IMX8MM_GPR_PCIE_AUX_EN_OVERRIDE	BIT(9)
 
+enum imx8_pcie_phy_type {
+	IMX8MM,
+	IMX8MP,
+};
+
 struct imx8_pcie_phy {
 	void __iomem		*base;
 	struct clk		*clk;
 	struct phy		*phy;
 	struct regmap		*iomuxc_gpr;
 	struct reset_control	*reset;
+	struct reset_control	*perst;
 	u32			refclk_pad_mode;
 	u32			tx_deemph_gen1;
 	u32			tx_deemph_gen2;
 	bool			clkreq_unused;
+	enum imx8_pcie_phy_type	variant;
 };
 
 static int imx8_pcie_phy_init(struct phy *phy)
@@ -68,31 +76,20 @@ static int imx8_pcie_phy_init(struct phy *phy)
 	reset_control_assert(imx8_phy->reset);
 
 	pad_mode = imx8_phy->refclk_pad_mode;
-	/* Set AUX_EN_OVERRIDE 1'b0, when the CLKREQ# isn't hooked */
-	regmap_update_bits(imx8_phy->iomuxc_gpr, IOMUXC_GPR14,
-			   IMX8MM_GPR_PCIE_AUX_EN_OVERRIDE,
-			   imx8_phy->clkreq_unused ?
-			   0 : IMX8MM_GPR_PCIE_AUX_EN_OVERRIDE);
-	regmap_update_bits(imx8_phy->iomuxc_gpr, IOMUXC_GPR14,
-			   IMX8MM_GPR_PCIE_AUX_EN,
-			   IMX8MM_GPR_PCIE_AUX_EN);
-	regmap_update_bits(imx8_phy->iomuxc_gpr, IOMUXC_GPR14,
-			   IMX8MM_GPR_PCIE_POWER_OFF, 0);
-	regmap_update_bits(imx8_phy->iomuxc_gpr, IOMUXC_GPR14,
-			   IMX8MM_GPR_PCIE_SSC_EN, 0);
-
-	regmap_update_bits(imx8_phy->iomuxc_gpr, IOMUXC_GPR14,
-			   IMX8MM_GPR_PCIE_REF_CLK_SEL,
-			   pad_mode == IMX8_PCIE_REFCLK_PAD_INPUT ?
-			   IMX8MM_GPR_PCIE_REF_CLK_EXT :
-			   IMX8MM_GPR_PCIE_REF_CLK_PLL);
-	usleep_range(100, 200);
-
-	/* Do the PHY common block reset */
-	regmap_update_bits(imx8_phy->iomuxc_gpr, IOMUXC_GPR14,
-			   IMX8MM_GPR_PCIE_CMN_RST,
-			   IMX8MM_GPR_PCIE_CMN_RST);
-	usleep_range(200, 500);
+	switch (imx8_phy->variant) {
+	case IMX8MM:
+		/* Tune PHY de-emphasis setting to pass PCIe compliance. */
+		if (imx8_phy->tx_deemph_gen1)
+			writel(imx8_phy->tx_deemph_gen1,
+			       imx8_phy->base + PCIE_PHY_TRSV_REG5);
+		if (imx8_phy->tx_deemph_gen2)
+			writel(imx8_phy->tx_deemph_gen2,
+			       imx8_phy->base + PCIE_PHY_TRSV_REG6);
+		break;
+	case IMX8MP:
+		reset_control_assert(imx8_phy->perst);
+		break;
+	}
 
 	if (pad_mode == IMX8_PCIE_REFCLK_PAD_INPUT ||
 	    pad_mode == IMX8_PCIE_REFCLK_PAD_UNUSED) {
@@ -120,20 +117,44 @@ static int imx8_pcie_phy_init(struct phy *phy)
 		       imx8_phy->base + IMX8MM_PCIE_PHY_CMN_REG065);
 	}
 
-	/* Tune PHY de-emphasis setting to pass PCIe compliance. */
-	if (imx8_phy->tx_deemph_gen1)
-		writel(imx8_phy->tx_deemph_gen1,
-		       imx8_phy->base + PCIE_PHY_TRSV_REG5);
-	if (imx8_phy->tx_deemph_gen2)
-		writel(imx8_phy->tx_deemph_gen2,
-		       imx8_phy->base + PCIE_PHY_TRSV_REG6);
+	/* Set AUX_EN_OVERRIDE 1'b0, when the CLKREQ# isn't hooked */
+	regmap_update_bits(imx8_phy->iomuxc_gpr, IOMUXC_GPR14,
+			   IMX8MM_GPR_PCIE_AUX_EN_OVERRIDE,
+			   imx8_phy->clkreq_unused ?
+			   0 : IMX8MM_GPR_PCIE_AUX_EN_OVERRIDE);
+	regmap_update_bits(imx8_phy->iomuxc_gpr, IOMUXC_GPR14,
+			   IMX8MM_GPR_PCIE_AUX_EN,
+			   IMX8MM_GPR_PCIE_AUX_EN);
+	regmap_update_bits(imx8_phy->iomuxc_gpr, IOMUXC_GPR14,
+			   IMX8MM_GPR_PCIE_POWER_OFF, 0);
+	regmap_update_bits(imx8_phy->iomuxc_gpr, IOMUXC_GPR14,
+			   IMX8MM_GPR_PCIE_SSC_EN, 0);
+
+	regmap_update_bits(imx8_phy->iomuxc_gpr, IOMUXC_GPR14,
+			   IMX8MM_GPR_PCIE_REF_CLK_SEL,
+			   pad_mode == IMX8_PCIE_REFCLK_PAD_INPUT ?
+			   IMX8MM_GPR_PCIE_REF_CLK_EXT :
+			   IMX8MM_GPR_PCIE_REF_CLK_PLL);
+	usleep_range(100, 200);
+
+	/* Do the PHY common block reset */
+	regmap_update_bits(imx8_phy->iomuxc_gpr, IOMUXC_GPR14,
+			   IMX8MM_GPR_PCIE_CMN_RST,
+			   IMX8MM_GPR_PCIE_CMN_RST);
 
-	reset_control_deassert(imx8_phy->reset);
+	switch (imx8_phy->variant) {
+	case IMX8MP:
+		reset_control_deassert(imx8_phy->perst);
+		fallthrough;
+	case IMX8MM:
+		reset_control_deassert(imx8_phy->reset);
+		usleep_range(200, 500);
+		break;
+	}
 
 	/* Polling to check the phy is ready or not. */
-	ret = readl_poll_timeout(imx8_phy->base + IMX8MM_PCIE_PHY_CMN_REG75,
-				 val, val == PCIE_PHY_CMN_REG75_PLL_DONE,
-				 10, 20000);
+	ret = readl_poll_timeout(imx8_phy->base + IMX8MM_PCIE_PHY_CMN_REG075,
+				 val, val == ANA_PLL_DONE, 10, 20000);
 	return ret;
 }
 
@@ -160,6 +181,13 @@ static const struct phy_ops imx8_pcie_phy_ops = {
 	.owner		= THIS_MODULE,
 };
 
+static const struct of_device_id imx8_pcie_phy_of_match[] = {
+	{.compatible = "fsl,imx8mm-pcie-phy", .data = (void *)IMX8MM},
+	{.compatible = "fsl,imx8mp-pcie-phy", .data = (void *)IMX8MP},
+	{ },
+};
+MODULE_DEVICE_TABLE(of, imx8_pcie_phy_of_match);
+
 static int imx8_pcie_phy_probe(struct platform_device *pdev)
 {
 	struct phy_provider *phy_provider;
@@ -172,6 +200,9 @@ static int imx8_pcie_phy_probe(struct platform_device *pdev)
 	if (!imx8_phy)
 		return -ENOMEM;
 
+	imx8_phy->variant =
+		(enum imx8_pcie_phy_type)of_device_get_match_data(dev);
+
 	/* get PHY refclk pad mode */
 	of_property_read_u32(np, "fsl,refclk-pad-mode",
 			     &imx8_phy->refclk_pad_mode);
@@ -196,8 +227,16 @@ static int imx8_pcie_phy_probe(struct platform_device *pdev)
 	}
 
 	/* Grab GPR config register range */
-	imx8_phy->iomuxc_gpr =
-		 syscon_regmap_lookup_by_compatible("fsl,imx6q-iomuxc-gpr");
+	switch (imx8_phy->variant) {
+	case IMX8MM:
+		imx8_phy->iomuxc_gpr =
+			 syscon_regmap_lookup_by_compatible("fsl,imx8mm-iomuxc-gpr");
+		break;
+	case IMX8MP:
+		imx8_phy->iomuxc_gpr =
+			 syscon_regmap_lookup_by_compatible("fsl,imx8mp-iomuxc-gpr");
+		break;
+	}
 	if (IS_ERR(imx8_phy->iomuxc_gpr)) {
 		dev_err(dev, "unable to find iomuxc registers\n");
 		return PTR_ERR(imx8_phy->iomuxc_gpr);
@@ -208,6 +247,14 @@ static int imx8_pcie_phy_probe(struct platform_device *pdev)
 		dev_err(dev, "Failed to get PCIEPHY reset control\n");
 		return PTR_ERR(imx8_phy->reset);
 	}
+	if (imx8_phy->variant == IMX8MP) {
+		imx8_phy->perst =
+			devm_reset_control_get_exclusive(dev, "perst");
+		if (IS_ERR(imx8_phy->perst)) {
+			dev_err(dev, "Failed to get PCIE PHY PERST control\n");
+			return PTR_ERR(imx8_phy->perst);
+		}
+	}
 
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	imx8_phy->base = devm_ioremap_resource(dev, res);
@@ -225,12 +272,6 @@ static int imx8_pcie_phy_probe(struct platform_device *pdev)
 	return PTR_ERR_OR_ZERO(phy_provider);
 }
 
-static const struct of_device_id imx8_pcie_phy_of_match[] = {
-	{.compatible = "fsl,imx8mm-pcie-phy",},
-	{ },
-};
-MODULE_DEVICE_TABLE(of, imx8_pcie_phy_of_match);
-
 static struct platform_driver imx8_pcie_phy_driver = {
 	.probe	= imx8_pcie_phy_probe,
 	.driver = {
-- 
2.25.1


-- 
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy

  parent reply	other threads:[~2022-08-30  8:04 UTC|newest]

Thread overview: 54+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-08-30  7:45 [PATCH v5 0/7] Add the iMX8MP PCIe support Richard Zhu
2022-08-30  7:45 ` Richard Zhu
2022-08-30  7:45 ` Richard Zhu
2022-08-30  7:45 ` [PATCH v5 1/7] dt-binding: phy: Add iMX8MP PCIe PHY binding Richard Zhu
2022-08-30  7:45   ` Richard Zhu
2022-08-30  7:45   ` Richard Zhu
2022-08-30  7:45 ` [PATCH v5 2/7] arm64: dts: imx8mp: Add iMX8MP PCIe support Richard Zhu
2022-08-30  7:45   ` Richard Zhu
2022-08-30  7:45   ` Richard Zhu
2022-08-30  7:46 ` [PATCH v5 3/7] arm64: dts: imx8mp-evk: Add " Richard Zhu
2022-08-30  7:46   ` Richard Zhu
2022-08-30  7:46   ` Richard Zhu
2022-08-31 10:18   ` Marcel Ziswiler
2022-08-31 10:18     ` Marcel Ziswiler
2022-08-31 10:18     ` Marcel Ziswiler
2022-09-01  1:28     ` Hongxing Zhu
2022-09-01  1:28       ` Hongxing Zhu
2022-09-01  1:28       ` Hongxing Zhu
2022-08-30  7:46 ` [PATCH v5 4/7] reset: imx7: Fix the iMX8MP PCIe PHY PERST support Richard Zhu
2022-08-30  7:46   ` Richard Zhu
2022-08-30  7:46   ` Richard Zhu
2022-08-30 16:46   ` Philipp Zabel
2022-08-30 16:46     ` Philipp Zabel
2022-08-30 16:46     ` Philipp Zabel
2022-08-31  0:38     ` Hongxing Zhu
2022-08-31  0:38       ` Hongxing Zhu
2022-08-31  0:38       ` Hongxing Zhu
2022-08-30  7:46 ` [PATCH v5 5/7] soc: imx: imx8mp-blk-ctrl: handle PCIe PHY resets Richard Zhu
2022-08-30  7:46   ` Richard Zhu
2022-08-30  7:46   ` Richard Zhu
2022-08-31  8:36   ` Lucas Stach
2022-08-31  8:36     ` Lucas Stach
2022-08-31  8:36     ` Lucas Stach
2022-09-01  1:28     ` Hongxing Zhu
2022-09-01  1:28       ` Hongxing Zhu
2022-09-01  1:28       ` Hongxing Zhu
2022-08-30  7:46 ` Richard Zhu [this message]
2022-08-30  7:46   ` [PATCH v5 6/7] phy: freescale: imx8m-pcie: Add iMX8MP PCIe PHY support Richard Zhu
2022-08-30  7:46   ` Richard Zhu
2022-08-30 13:07   ` Lucas Stach
2022-08-30 13:07     ` Lucas Stach
2022-08-30 13:07     ` Lucas Stach
2022-08-31  6:16     ` Hongxing Zhu
2022-08-31  6:16       ` Hongxing Zhu
2022-08-31  6:16       ` Hongxing Zhu
2022-08-31  8:34       ` Lucas Stach
2022-08-31  8:34         ` Lucas Stach
2022-08-31  8:34         ` Lucas Stach
2022-09-01  1:28         ` Hongxing Zhu
2022-09-01  1:28           ` Hongxing Zhu
2022-09-01  1:28           ` Hongxing Zhu
2022-08-30  7:46 ` [PATCH v5 7/7] PCI: imx6: Add iMX8MP PCIe support Richard Zhu
2022-08-30  7:46   ` Richard Zhu
2022-08-30  7:46   ` Richard Zhu

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1661845564-11373-7-git-send-email-hongxing.zhu@nxp.com \
    --to=hongxing.zhu@nxp.com \
    --cc=alexander.stein@ew.tq-group.com \
    --cc=bhelgaas@google.com \
    --cc=devicetree@vger.kernel.org \
    --cc=kernel@pengutronix.de \
    --cc=l.stach@pengutronix.de \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-imx@nxp.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=linux-phy@lists.infradead.org \
    --cc=lorenzo.pieralisi@arm.com \
    --cc=marex@denx.de \
    --cc=p.zabel@pengutronix.de \
    --cc=richard.leitner@linux.dev \
    --cc=robh@kernel.org \
    --cc=shawnguo@kernel.org \
    --cc=vkoul@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.