From: Geert Uytterhoeven <geert+renesas@glider.be> To: Magnus Damm <magnus.damm@gmail.com>, Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: linux-renesas-soc@vger.kernel.org, linux-arm-kernel@lists.infradead.org, Geert Uytterhoeven <geert+renesas@glider.be> Subject: [PATCH 1/2] ARM: dts: r8a7740: Add LCDC nodes Date: Thu, 22 Jun 2023 11:23:14 +0200 [thread overview] Message-ID: <1994a9c58321667733d7cd7500d7e25d30308498.1687417585.git.geert+renesas@glider.be> (raw) In-Reply-To: <cover.1687417585.git.geert+renesas@glider.be> Add device nodes for the two LCD Controllers (LCDC) on the R-Mobile A1 SoC, and for the two optional external LCDL clock inputs. Note that the HDMI clock for LCDC1 is not added, as this clock is not yet supported. Based on a patch by Laurent Pinchart adding the first LCDC device node. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> --- Changes compared to Laurent's original: - Add lcdc0 label, - Rename node from display to lcdc-controller, - Rename compatible value from "renesas,lcdc-r8a7740" to "renesas,r8a7740-lcdc", - Correct syntax of reg property, - Use GIC_SPI macro, - Add more clocks, - Add power-domains property, - Add status disabled, - Remove second port from lcdc0, as only lcdc1 has an HDMI port, - Add lcdc1 device node. --- arch/arm/boot/dts/r8a7740.dtsi | 65 ++++++++++++++++++++++++++++++++++ 1 file changed, 65 insertions(+) diff --git a/arch/arm/boot/dts/r8a7740.dtsi b/arch/arm/boot/dts/r8a7740.dtsi index 1b2cf5fa322b2985..55884ec701f8dab4 100644 --- a/arch/arm/boot/dts/r8a7740.dtsi +++ b/arch/arm/boot/dts/r8a7740.dtsi @@ -398,6 +398,61 @@ sh_fsi2: sound@fe1f0000 { status = "disabled"; }; + lcdc0: lcd-controller@fe940000 { + compatible = "renesas,r8a7740-lcdc"; + reg = <0xfe940000 0x4000>; + interrupts = <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp1_clks R8A7740_CLK_LCDC0>, + <&cpg_clocks R8A7740_CLK_M3>, <&lcdlclk0_clk>, + <&vou_clk>; + clock-names = "fck", "media", "lclk", "video"; + power-domains = <&pd_a4lc>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + lcdc0_rgb: endpoint { + }; + }; + }; + }; + + lcdc1: lcd-controller@fe944000 { + compatible = "renesas,r8a7740-lcdc"; + reg = <0xfe944000 0x4000>; + interrupts = <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp1_clks R8A7740_CLK_LCDC1>, + <&cpg_clocks R8A7740_CLK_M3>, <&lcdlclk1_clk>, + <&vou_clk>; + clock-names = "fck", "media", "lclk", "video"; + power-domains = <&pd_a4lc>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + lcdc1_rgb: endpoint { + }; + }; + + port@1 { + reg = <1>; + + lcdc1_hdmi: endpoint { + }; + }; + }; + }; + tmu0: timer@fff80000 { compatible = "renesas,tmu-r8a7740", "renesas,tmu"; reg = <0xfff80000 0x2c>; @@ -474,6 +529,16 @@ fsibck_clk: fsibck { #clock-cells = <0>; clock-frequency = <0>; }; + lcdlclk0_clk: lcdlclk0 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + lcdlclk1_clk: lcdlclk1 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; /* Special CPG clocks */ cpg_clocks: cpg_clocks@e6150000 { -- 2.34.1 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
WARNING: multiple messages have this Message-ID (diff)
From: Geert Uytterhoeven <geert+renesas@glider.be> To: Magnus Damm <magnus.damm@gmail.com>, Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: linux-renesas-soc@vger.kernel.org, linux-arm-kernel@lists.infradead.org, Geert Uytterhoeven <geert+renesas@glider.be> Subject: [PATCH 1/2] ARM: dts: r8a7740: Add LCDC nodes Date: Thu, 22 Jun 2023 11:23:14 +0200 [thread overview] Message-ID: <1994a9c58321667733d7cd7500d7e25d30308498.1687417585.git.geert+renesas@glider.be> (raw) In-Reply-To: <cover.1687417585.git.geert+renesas@glider.be> Add device nodes for the two LCD Controllers (LCDC) on the R-Mobile A1 SoC, and for the two optional external LCDL clock inputs. Note that the HDMI clock for LCDC1 is not added, as this clock is not yet supported. Based on a patch by Laurent Pinchart adding the first LCDC device node. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> --- Changes compared to Laurent's original: - Add lcdc0 label, - Rename node from display to lcdc-controller, - Rename compatible value from "renesas,lcdc-r8a7740" to "renesas,r8a7740-lcdc", - Correct syntax of reg property, - Use GIC_SPI macro, - Add more clocks, - Add power-domains property, - Add status disabled, - Remove second port from lcdc0, as only lcdc1 has an HDMI port, - Add lcdc1 device node. --- arch/arm/boot/dts/r8a7740.dtsi | 65 ++++++++++++++++++++++++++++++++++ 1 file changed, 65 insertions(+) diff --git a/arch/arm/boot/dts/r8a7740.dtsi b/arch/arm/boot/dts/r8a7740.dtsi index 1b2cf5fa322b2985..55884ec701f8dab4 100644 --- a/arch/arm/boot/dts/r8a7740.dtsi +++ b/arch/arm/boot/dts/r8a7740.dtsi @@ -398,6 +398,61 @@ sh_fsi2: sound@fe1f0000 { status = "disabled"; }; + lcdc0: lcd-controller@fe940000 { + compatible = "renesas,r8a7740-lcdc"; + reg = <0xfe940000 0x4000>; + interrupts = <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp1_clks R8A7740_CLK_LCDC0>, + <&cpg_clocks R8A7740_CLK_M3>, <&lcdlclk0_clk>, + <&vou_clk>; + clock-names = "fck", "media", "lclk", "video"; + power-domains = <&pd_a4lc>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + lcdc0_rgb: endpoint { + }; + }; + }; + }; + + lcdc1: lcd-controller@fe944000 { + compatible = "renesas,r8a7740-lcdc"; + reg = <0xfe944000 0x4000>; + interrupts = <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp1_clks R8A7740_CLK_LCDC1>, + <&cpg_clocks R8A7740_CLK_M3>, <&lcdlclk1_clk>, + <&vou_clk>; + clock-names = "fck", "media", "lclk", "video"; + power-domains = <&pd_a4lc>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + lcdc1_rgb: endpoint { + }; + }; + + port@1 { + reg = <1>; + + lcdc1_hdmi: endpoint { + }; + }; + }; + }; + tmu0: timer@fff80000 { compatible = "renesas,tmu-r8a7740", "renesas,tmu"; reg = <0xfff80000 0x2c>; @@ -474,6 +529,16 @@ fsibck_clk: fsibck { #clock-cells = <0>; clock-frequency = <0>; }; + lcdlclk0_clk: lcdlclk0 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + lcdlclk1_clk: lcdlclk1 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; /* Special CPG clocks */ cpg_clocks: cpg_clocks@e6150000 { -- 2.34.1
next prev parent reply other threads:[~2023-06-22 9:23 UTC|newest] Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top 2023-06-22 9:23 [PATCH 0/2] ARM: dts: r8a7740/armadillo800eva: Add LCD support Geert Uytterhoeven 2023-06-22 9:23 ` Geert Uytterhoeven 2023-06-22 9:23 ` Geert Uytterhoeven [this message] 2023-06-22 9:23 ` [PATCH 1/2] ARM: dts: r8a7740: Add LCDC nodes Geert Uytterhoeven 2023-06-23 13:03 ` Laurent Pinchart 2023-06-23 13:03 ` Laurent Pinchart 2023-06-23 15:07 ` Geert Uytterhoeven 2023-06-23 15:07 ` Geert Uytterhoeven 2023-06-23 15:12 ` Laurent Pinchart 2023-06-23 15:12 ` Laurent Pinchart 2023-06-23 15:26 ` Geert Uytterhoeven 2023-06-23 15:26 ` Geert Uytterhoeven 2023-06-22 9:23 ` [PATCH 2/2] ARM: dts: armadillo800eva: Add LCD panel Geert Uytterhoeven 2023-06-22 9:23 ` Geert Uytterhoeven 2023-06-23 13:03 ` Laurent Pinchart 2023-06-23 13:03 ` Laurent Pinchart
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1994a9c58321667733d7cd7500d7e25d30308498.1687417585.git.geert+renesas@glider.be \ --to=geert+renesas@glider.be \ --cc=laurent.pinchart@ideasonboard.com \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-renesas-soc@vger.kernel.org \ --cc=magnus.damm@gmail.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.