From: Tony Lindgren <tony@atomide.com>
To: linux-arm-kernel@lists.infradead.org
Cc: linux-omap@vger.kernel.org
Subject: [PATCH 14/16] ARM: OMAP: Split plat/serial.h for omap1 and omap2+
Date: Thu, 04 Oct 2012 15:05:06 -0700 [thread overview]
Message-ID: <20121004220505.26676.15846.stgit@muffinssi.local> (raw)
In-Reply-To: <20121004213950.26676.21898.stgit@muffinssi.local>
For omap1, we'll keep mach/serial.h around for 8250.c hardware
workarounds. For omap2+, we no longer need mach/serial.h and
can make it local to mach-omap2.
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
arch/arm/mach-omap1/include/mach/debug-macro.S | 2 -
arch/arm/mach-omap1/include/mach/hardware.h | 2 -
arch/arm/mach-omap1/include/mach/serial.h | 53 ++++++++++++++++++++
arch/arm/mach-omap1/include/mach/uncompress.h | 2 -
arch/arm/mach-omap2/board-rm680.c | 1
arch/arm/mach-omap2/common.h | 2 -
arch/arm/mach-omap2/include/mach/debug-macro.S | 2 -
arch/arm/mach-omap2/include/mach/uncompress.h | 2 -
arch/arm/mach-omap2/io.c | 2 -
arch/arm/mach-omap2/omap_hwmod_2420_data.c | 1
arch/arm/mach-omap2/omap_hwmod_2430_data.c | 1
.../omap_hwmod_2xxx_3xxx_interconnect_data.c | 1
.../mach-omap2/omap_hwmod_2xxx_3xxx_ipblock_data.c | 1
.../mach-omap2/omap_hwmod_2xxx_interconnect_data.c | 2 -
arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c | 1
arch/arm/mach-omap2/omap_hwmod_3xxx_data.c | 2 -
arch/arm/mach-omap2/serial.c | 2 -
arch/arm/mach-omap2/serial.h | 11 ----
18 files changed, 63 insertions(+), 27 deletions(-)
create mode 100644 arch/arm/mach-omap1/include/mach/serial.h
rename arch/arm/{plat-omap/include/plat/serial.h => mach-omap2/serial.h} (91%)
diff --git a/arch/arm/mach-omap1/include/mach/debug-macro.S b/arch/arm/mach-omap1/include/mach/debug-macro.S
index 2b36a28..5c1a26c 100644
--- a/arch/arm/mach-omap1/include/mach/debug-macro.S
+++ b/arch/arm/mach-omap1/include/mach/debug-macro.S
@@ -13,7 +13,7 @@
#include <linux/serial_reg.h>
-#include <plat/serial.h>
+#include "serial.h"
.pushsection .data
omap_uart_phys: .word 0x0
diff --git a/arch/arm/mach-omap1/include/mach/hardware.h b/arch/arm/mach-omap1/include/mach/hardware.h
index 2e60265..2a4eb19 100644
--- a/arch/arm/mach-omap1/include/mach/hardware.h
+++ b/arch/arm/mach-omap1/include/mach/hardware.h
@@ -72,7 +72,7 @@ static inline u32 omap_cs3_phys(void)
#endif /* ifndef __ASSEMBLER__ */
-#include <plat/serial.h>
+#include <mach/serial.h>
/*
* ---------------------------------------------------------------------------
diff --git a/arch/arm/mach-omap1/include/mach/serial.h b/arch/arm/mach-omap1/include/mach/serial.h
new file mode 100644
index 0000000..2ce6a2d
--- /dev/null
+++ b/arch/arm/mach-omap1/include/mach/serial.h
@@ -0,0 +1,53 @@
+/*
+ * Copyright (C) 2009 Texas Instruments
+ * Added OMAP4 support- Santosh Shilimkar <santosh.shilimkar@ti.com>
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __ASM_ARCH_SERIAL_H
+#define __ASM_ARCH_SERIAL_H
+
+#include <linux/init.h>
+
+/*
+ * Memory entry used for the DEBUG_LL UART configuration, relative to
+ * start of RAM. See also uncompress.h and debug-macro.S.
+ *
+ * Note that using a memory location for storing the UART configuration
+ * has at least two limitations:
+ *
+ * 1. Kernel uncompress code cannot overlap OMAP_UART_INFO as the
+ * uncompress code could then partially overwrite itself
+ * 2. We assume printascii is called at least once before paging_init,
+ * and addruart has a chance to read OMAP_UART_INFO
+ */
+#define OMAP_UART_INFO_OFS 0x3ffc
+
+/* OMAP1 serial ports */
+#define OMAP1_UART1_BASE 0xfffb0000
+#define OMAP1_UART2_BASE 0xfffb0800
+#define OMAP1_UART3_BASE 0xfffb9800
+
+#define OMAP_PORT_SHIFT 2
+#define OMAP7XX_PORT_SHIFT 0
+
+#define OMAP1510_BASE_BAUD (12000000/16)
+#define OMAP16XX_BASE_BAUD (48000000/16)
+
+/*
+ * DEBUG_LL port encoding stored into the UART1 scratchpad register by
+ * decomp_setup in uncompress.h
+ */
+#define OMAP1UART1 11
+#define OMAP1UART2 12
+#define OMAP1UART3 13
+
+#ifndef __ASSEMBLER__
+extern void omap_serial_init(void);
+#endif
+
+#endif
diff --git a/arch/arm/mach-omap1/include/mach/uncompress.h b/arch/arm/mach-omap1/include/mach/uncompress.h
index e9eb834..ad6fbe7 100644
--- a/arch/arm/mach-omap1/include/mach/uncompress.h
+++ b/arch/arm/mach-omap1/include/mach/uncompress.h
@@ -23,7 +23,7 @@
#include <asm/memory.h>
#include <asm/mach-types.h>
-#include <plat/serial.h>
+#include "serial.h"
#define MDR1_MODE_MASK 0x07
diff --git a/arch/arm/mach-omap2/board-rm680.c b/arch/arm/mach-omap2/board-rm680.c
index 4250229..533a851 100644
--- a/arch/arm/mach-omap2/board-rm680.c
+++ b/arch/arm/mach-omap2/board-rm680.c
@@ -26,7 +26,6 @@
#include <plat/usb.h>
#include <plat/gpmc.h>
#include "common.h"
-#include <plat/serial.h>
#include "mux.h"
#include "hsmmc.h"
diff --git a/arch/arm/mach-omap2/common.h b/arch/arm/mach-omap2/common.h
index d3cd625..3301252 100644
--- a/arch/arm/mach-omap2/common.h
+++ b/arch/arm/mach-omap2/common.h
@@ -35,10 +35,10 @@
#include <asm/proc-fns.h>
#include <plat/cpu.h>
-#include <plat/serial.h>
#include "../plat-omap/common.h"
#include "i2c.h"
+#include "serial.h"
#define OMAP_INTC_START NR_IRQS
diff --git a/arch/arm/mach-omap2/include/mach/debug-macro.S b/arch/arm/mach-omap2/include/mach/debug-macro.S
index 93d10de..4b5cbdf 100644
--- a/arch/arm/mach-omap2/include/mach/debug-macro.S
+++ b/arch/arm/mach-omap2/include/mach/debug-macro.S
@@ -13,7 +13,7 @@
#include <linux/serial_reg.h>
-#include <plat/serial.h>
+#include <../mach-omap2/serial.h>
#define UART_OFFSET(addr) ((addr) & 0x00ffffff)
diff --git a/arch/arm/mach-omap2/include/mach/uncompress.h b/arch/arm/mach-omap2/include/mach/uncompress.h
index 226c757..28d1ec0 100644
--- a/arch/arm/mach-omap2/include/mach/uncompress.h
+++ b/arch/arm/mach-omap2/include/mach/uncompress.h
@@ -23,7 +23,7 @@
#include <asm/memory.h>
#include <asm/mach-types.h>
-#include <plat/serial.h>
+#include <../mach-omap2/serial.h>
#define MDR1_MODE_MASK 0x07
diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c
index 614af76..1e0ba6f 100644
--- a/arch/arm/mach-omap2/io.c
+++ b/arch/arm/mach-omap2/io.c
@@ -26,7 +26,6 @@
#include <asm/mach/map.h>
#include <plat/sdrc.h>
-#include <plat/serial.h>
#include <plat/omap-pm.h>
#include "omap_hwmod.h"
#include <plat/dma.h>
@@ -43,6 +42,7 @@
#include "clock2xxx.h"
#include "clock3xxx.h"
#include "clock44xx.h"
+#include "serial.h"
/*
* The machine specific code may provide the extra mapping besides the
diff --git a/arch/arm/mach-omap2/omap_hwmod_2420_data.c b/arch/arm/mach-omap2/omap_hwmod_2420_data.c
index 3ed44b2..2310dc7 100644
--- a/arch/arm/mach-omap2/omap_hwmod_2420_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_2420_data.c
@@ -18,7 +18,6 @@
#include "omap_hwmod.h"
#include <plat/dma.h>
-#include <plat/serial.h>
#include <plat/dmtimer.h>
#include "l3_2xxx.h"
#include "l4_2xxx.h"
diff --git a/arch/arm/mach-omap2/omap_hwmod_2430_data.c b/arch/arm/mach-omap2/omap_hwmod_2430_data.c
index 6d997c0..cbd992c 100644
--- a/arch/arm/mach-omap2/omap_hwmod_2430_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_2430_data.c
@@ -19,7 +19,6 @@
#include "omap_hwmod.h"
#include <plat/dma.h>
-#include <plat/serial.h>
#include <plat/dmtimer.h>
#include "mmc.h"
#include "l3_2xxx.h"
diff --git a/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_interconnect_data.c b/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_interconnect_data.c
index b490087..0413dab 100644
--- a/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_interconnect_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_interconnect_data.c
@@ -14,7 +14,6 @@
#include <asm/sizes.h>
#include "omap_hwmod.h"
-#include <plat/serial.h>
#include "omap_hwmod_common_data.h"
diff --git a/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_ipblock_data.c b/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_ipblock_data.c
index c0390c4..84e084d 100644
--- a/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_ipblock_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_ipblock_data.c
@@ -10,7 +10,6 @@
* published by the Free Software Foundation.
*/
#include "omap_hwmod.h"
-#include <plat/serial.h>
#include <plat/dma.h>
#include "../plat-omap/common.h"
#include "hdq1w.h"
diff --git a/arch/arm/mach-omap2/omap_hwmod_2xxx_interconnect_data.c b/arch/arm/mach-omap2/omap_hwmod_2xxx_interconnect_data.c
index f54714a..47901a5 100644
--- a/arch/arm/mach-omap2/omap_hwmod_2xxx_interconnect_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_2xxx_interconnect_data.c
@@ -14,9 +14,9 @@
#include <asm/sizes.h>
#include "omap_hwmod.h"
-#include <plat/serial.h>
#include "l3_2xxx.h"
#include "l4_2xxx.h"
+#include "serial.h"
#include "omap_hwmod_common_data.h"
diff --git a/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c b/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c
index 7e1bc57..0370acf 100644
--- a/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c
@@ -9,7 +9,6 @@
* published by the Free Software Foundation.
*/
#include "omap_hwmod.h"
-#include <plat/serial.h>
#include <linux/platform_data/gpio-omap.h>
#include <plat/dma.h>
#include <plat/dmtimer.h>
diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
index ac0290d..88e0364 100644
--- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
@@ -21,7 +21,6 @@
#include "omap_hwmod.h"
#include <plat/dma.h>
-#include <plat/serial.h>
#include "l3_3xxx.h"
#include "l4_3xxx.h"
#include "mmc.h"
@@ -38,6 +37,7 @@
#include "cm-regbits-34xx.h"
#include "i2c.h"
#include "wd_timer.h"
+#include "serial.h"
/*
* OMAP3xxx hardware module integration data
diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c
index e07772a..777d504 100644
--- a/arch/arm/mach-omap2/serial.c
+++ b/arch/arm/mach-omap2/serial.c
@@ -33,7 +33,6 @@
#include "omap_hwmod.h"
#include "omap_device.h"
#include <plat/omap-pm.h>
-#include <plat/serial.h>
#include "prm2xxx_3xxx.h"
#include "pm.h"
@@ -41,6 +40,7 @@
#include "prm-regbits-34xx.h"
#include "control.h"
#include "mux.h"
+#include "serial.h"
/*
* NOTE: By default the serial auto_suspend timeout is disabled as it causes
diff --git a/arch/arm/plat-omap/include/plat/serial.h b/arch/arm/mach-omap2/serial.h
similarity index 91%
rename from arch/arm/plat-omap/include/plat/serial.h
rename to arch/arm/mach-omap2/serial.h
index b780470..6a68062 100644
--- a/arch/arm/plat-omap/include/plat/serial.h
+++ b/arch/arm/mach-omap2/serial.h
@@ -29,11 +29,6 @@
*/
#define OMAP_UART_INFO_OFS 0x3ffc
-/* OMAP1 serial ports */
-#define OMAP1_UART1_BASE 0xfffb0000
-#define OMAP1_UART2_BASE 0xfffb0800
-#define OMAP1_UART3_BASE 0xfffb9800
-
/* OMAP2 serial ports */
#define OMAP2_UART1_BASE 0x4806a000
#define OMAP2_UART2_BASE 0x4806c000
@@ -76,20 +71,14 @@
#define ZOOM_UART_VIRT 0xfa400000
#define OMAP_PORT_SHIFT 2
-#define OMAP7XX_PORT_SHIFT 0
#define ZOOM_PORT_SHIFT 1
-#define OMAP1510_BASE_BAUD (12000000/16)
-#define OMAP16XX_BASE_BAUD (48000000/16)
#define OMAP24XX_BASE_BAUD (48000000/16)
/*
* DEBUG_LL port encoding stored into the UART1 scratchpad register by
* decomp_setup in uncompress.h
*/
-#define OMAP1UART1 11
-#define OMAP1UART2 12
-#define OMAP1UART3 13
#define OMAP2UART1 21
#define OMAP2UART2 22
#define OMAP2UART3 23
WARNING: multiple messages have this Message-ID (diff)
From: tony@atomide.com (Tony Lindgren)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 14/16] ARM: OMAP: Split plat/serial.h for omap1 and omap2+
Date: Thu, 04 Oct 2012 15:05:06 -0700 [thread overview]
Message-ID: <20121004220505.26676.15846.stgit@muffinssi.local> (raw)
In-Reply-To: <20121004213950.26676.21898.stgit@muffinssi.local>
For omap1, we'll keep mach/serial.h around for 8250.c hardware
workarounds. For omap2+, we no longer need mach/serial.h and
can make it local to mach-omap2.
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
arch/arm/mach-omap1/include/mach/debug-macro.S | 2 -
arch/arm/mach-omap1/include/mach/hardware.h | 2 -
arch/arm/mach-omap1/include/mach/serial.h | 53 ++++++++++++++++++++
arch/arm/mach-omap1/include/mach/uncompress.h | 2 -
arch/arm/mach-omap2/board-rm680.c | 1
arch/arm/mach-omap2/common.h | 2 -
arch/arm/mach-omap2/include/mach/debug-macro.S | 2 -
arch/arm/mach-omap2/include/mach/uncompress.h | 2 -
arch/arm/mach-omap2/io.c | 2 -
arch/arm/mach-omap2/omap_hwmod_2420_data.c | 1
arch/arm/mach-omap2/omap_hwmod_2430_data.c | 1
.../omap_hwmod_2xxx_3xxx_interconnect_data.c | 1
.../mach-omap2/omap_hwmod_2xxx_3xxx_ipblock_data.c | 1
.../mach-omap2/omap_hwmod_2xxx_interconnect_data.c | 2 -
arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c | 1
arch/arm/mach-omap2/omap_hwmod_3xxx_data.c | 2 -
arch/arm/mach-omap2/serial.c | 2 -
arch/arm/mach-omap2/serial.h | 11 ----
18 files changed, 63 insertions(+), 27 deletions(-)
create mode 100644 arch/arm/mach-omap1/include/mach/serial.h
rename arch/arm/{plat-omap/include/plat/serial.h => mach-omap2/serial.h} (91%)
diff --git a/arch/arm/mach-omap1/include/mach/debug-macro.S b/arch/arm/mach-omap1/include/mach/debug-macro.S
index 2b36a28..5c1a26c 100644
--- a/arch/arm/mach-omap1/include/mach/debug-macro.S
+++ b/arch/arm/mach-omap1/include/mach/debug-macro.S
@@ -13,7 +13,7 @@
#include <linux/serial_reg.h>
-#include <plat/serial.h>
+#include "serial.h"
.pushsection .data
omap_uart_phys: .word 0x0
diff --git a/arch/arm/mach-omap1/include/mach/hardware.h b/arch/arm/mach-omap1/include/mach/hardware.h
index 2e60265..2a4eb19 100644
--- a/arch/arm/mach-omap1/include/mach/hardware.h
+++ b/arch/arm/mach-omap1/include/mach/hardware.h
@@ -72,7 +72,7 @@ static inline u32 omap_cs3_phys(void)
#endif /* ifndef __ASSEMBLER__ */
-#include <plat/serial.h>
+#include <mach/serial.h>
/*
* ---------------------------------------------------------------------------
diff --git a/arch/arm/mach-omap1/include/mach/serial.h b/arch/arm/mach-omap1/include/mach/serial.h
new file mode 100644
index 0000000..2ce6a2d
--- /dev/null
+++ b/arch/arm/mach-omap1/include/mach/serial.h
@@ -0,0 +1,53 @@
+/*
+ * Copyright (C) 2009 Texas Instruments
+ * Added OMAP4 support- Santosh Shilimkar <santosh.shilimkar@ti.com>
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __ASM_ARCH_SERIAL_H
+#define __ASM_ARCH_SERIAL_H
+
+#include <linux/init.h>
+
+/*
+ * Memory entry used for the DEBUG_LL UART configuration, relative to
+ * start of RAM. See also uncompress.h and debug-macro.S.
+ *
+ * Note that using a memory location for storing the UART configuration
+ * has at least two limitations:
+ *
+ * 1. Kernel uncompress code cannot overlap OMAP_UART_INFO as the
+ * uncompress code could then partially overwrite itself
+ * 2. We assume printascii is called at least once before paging_init,
+ * and addruart has a chance to read OMAP_UART_INFO
+ */
+#define OMAP_UART_INFO_OFS 0x3ffc
+
+/* OMAP1 serial ports */
+#define OMAP1_UART1_BASE 0xfffb0000
+#define OMAP1_UART2_BASE 0xfffb0800
+#define OMAP1_UART3_BASE 0xfffb9800
+
+#define OMAP_PORT_SHIFT 2
+#define OMAP7XX_PORT_SHIFT 0
+
+#define OMAP1510_BASE_BAUD (12000000/16)
+#define OMAP16XX_BASE_BAUD (48000000/16)
+
+/*
+ * DEBUG_LL port encoding stored into the UART1 scratchpad register by
+ * decomp_setup in uncompress.h
+ */
+#define OMAP1UART1 11
+#define OMAP1UART2 12
+#define OMAP1UART3 13
+
+#ifndef __ASSEMBLER__
+extern void omap_serial_init(void);
+#endif
+
+#endif
diff --git a/arch/arm/mach-omap1/include/mach/uncompress.h b/arch/arm/mach-omap1/include/mach/uncompress.h
index e9eb834..ad6fbe7 100644
--- a/arch/arm/mach-omap1/include/mach/uncompress.h
+++ b/arch/arm/mach-omap1/include/mach/uncompress.h
@@ -23,7 +23,7 @@
#include <asm/memory.h>
#include <asm/mach-types.h>
-#include <plat/serial.h>
+#include "serial.h"
#define MDR1_MODE_MASK 0x07
diff --git a/arch/arm/mach-omap2/board-rm680.c b/arch/arm/mach-omap2/board-rm680.c
index 4250229..533a851 100644
--- a/arch/arm/mach-omap2/board-rm680.c
+++ b/arch/arm/mach-omap2/board-rm680.c
@@ -26,7 +26,6 @@
#include <plat/usb.h>
#include <plat/gpmc.h>
#include "common.h"
-#include <plat/serial.h>
#include "mux.h"
#include "hsmmc.h"
diff --git a/arch/arm/mach-omap2/common.h b/arch/arm/mach-omap2/common.h
index d3cd625..3301252 100644
--- a/arch/arm/mach-omap2/common.h
+++ b/arch/arm/mach-omap2/common.h
@@ -35,10 +35,10 @@
#include <asm/proc-fns.h>
#include <plat/cpu.h>
-#include <plat/serial.h>
#include "../plat-omap/common.h"
#include "i2c.h"
+#include "serial.h"
#define OMAP_INTC_START NR_IRQS
diff --git a/arch/arm/mach-omap2/include/mach/debug-macro.S b/arch/arm/mach-omap2/include/mach/debug-macro.S
index 93d10de..4b5cbdf 100644
--- a/arch/arm/mach-omap2/include/mach/debug-macro.S
+++ b/arch/arm/mach-omap2/include/mach/debug-macro.S
@@ -13,7 +13,7 @@
#include <linux/serial_reg.h>
-#include <plat/serial.h>
+#include <../mach-omap2/serial.h>
#define UART_OFFSET(addr) ((addr) & 0x00ffffff)
diff --git a/arch/arm/mach-omap2/include/mach/uncompress.h b/arch/arm/mach-omap2/include/mach/uncompress.h
index 226c757..28d1ec0 100644
--- a/arch/arm/mach-omap2/include/mach/uncompress.h
+++ b/arch/arm/mach-omap2/include/mach/uncompress.h
@@ -23,7 +23,7 @@
#include <asm/memory.h>
#include <asm/mach-types.h>
-#include <plat/serial.h>
+#include <../mach-omap2/serial.h>
#define MDR1_MODE_MASK 0x07
diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c
index 614af76..1e0ba6f 100644
--- a/arch/arm/mach-omap2/io.c
+++ b/arch/arm/mach-omap2/io.c
@@ -26,7 +26,6 @@
#include <asm/mach/map.h>
#include <plat/sdrc.h>
-#include <plat/serial.h>
#include <plat/omap-pm.h>
#include "omap_hwmod.h"
#include <plat/dma.h>
@@ -43,6 +42,7 @@
#include "clock2xxx.h"
#include "clock3xxx.h"
#include "clock44xx.h"
+#include "serial.h"
/*
* The machine specific code may provide the extra mapping besides the
diff --git a/arch/arm/mach-omap2/omap_hwmod_2420_data.c b/arch/arm/mach-omap2/omap_hwmod_2420_data.c
index 3ed44b2..2310dc7 100644
--- a/arch/arm/mach-omap2/omap_hwmod_2420_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_2420_data.c
@@ -18,7 +18,6 @@
#include "omap_hwmod.h"
#include <plat/dma.h>
-#include <plat/serial.h>
#include <plat/dmtimer.h>
#include "l3_2xxx.h"
#include "l4_2xxx.h"
diff --git a/arch/arm/mach-omap2/omap_hwmod_2430_data.c b/arch/arm/mach-omap2/omap_hwmod_2430_data.c
index 6d997c0..cbd992c 100644
--- a/arch/arm/mach-omap2/omap_hwmod_2430_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_2430_data.c
@@ -19,7 +19,6 @@
#include "omap_hwmod.h"
#include <plat/dma.h>
-#include <plat/serial.h>
#include <plat/dmtimer.h>
#include "mmc.h"
#include "l3_2xxx.h"
diff --git a/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_interconnect_data.c b/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_interconnect_data.c
index b490087..0413dab 100644
--- a/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_interconnect_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_interconnect_data.c
@@ -14,7 +14,6 @@
#include <asm/sizes.h>
#include "omap_hwmod.h"
-#include <plat/serial.h>
#include "omap_hwmod_common_data.h"
diff --git a/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_ipblock_data.c b/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_ipblock_data.c
index c0390c4..84e084d 100644
--- a/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_ipblock_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_ipblock_data.c
@@ -10,7 +10,6 @@
* published by the Free Software Foundation.
*/
#include "omap_hwmod.h"
-#include <plat/serial.h>
#include <plat/dma.h>
#include "../plat-omap/common.h"
#include "hdq1w.h"
diff --git a/arch/arm/mach-omap2/omap_hwmod_2xxx_interconnect_data.c b/arch/arm/mach-omap2/omap_hwmod_2xxx_interconnect_data.c
index f54714a..47901a5 100644
--- a/arch/arm/mach-omap2/omap_hwmod_2xxx_interconnect_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_2xxx_interconnect_data.c
@@ -14,9 +14,9 @@
#include <asm/sizes.h>
#include "omap_hwmod.h"
-#include <plat/serial.h>
#include "l3_2xxx.h"
#include "l4_2xxx.h"
+#include "serial.h"
#include "omap_hwmod_common_data.h"
diff --git a/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c b/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c
index 7e1bc57..0370acf 100644
--- a/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c
@@ -9,7 +9,6 @@
* published by the Free Software Foundation.
*/
#include "omap_hwmod.h"
-#include <plat/serial.h>
#include <linux/platform_data/gpio-omap.h>
#include <plat/dma.h>
#include <plat/dmtimer.h>
diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
index ac0290d..88e0364 100644
--- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
@@ -21,7 +21,6 @@
#include "omap_hwmod.h"
#include <plat/dma.h>
-#include <plat/serial.h>
#include "l3_3xxx.h"
#include "l4_3xxx.h"
#include "mmc.h"
@@ -38,6 +37,7 @@
#include "cm-regbits-34xx.h"
#include "i2c.h"
#include "wd_timer.h"
+#include "serial.h"
/*
* OMAP3xxx hardware module integration data
diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c
index e07772a..777d504 100644
--- a/arch/arm/mach-omap2/serial.c
+++ b/arch/arm/mach-omap2/serial.c
@@ -33,7 +33,6 @@
#include "omap_hwmod.h"
#include "omap_device.h"
#include <plat/omap-pm.h>
-#include <plat/serial.h>
#include "prm2xxx_3xxx.h"
#include "pm.h"
@@ -41,6 +40,7 @@
#include "prm-regbits-34xx.h"
#include "control.h"
#include "mux.h"
+#include "serial.h"
/*
* NOTE: By default the serial auto_suspend timeout is disabled as it causes
diff --git a/arch/arm/plat-omap/include/plat/serial.h b/arch/arm/mach-omap2/serial.h
similarity index 91%
rename from arch/arm/plat-omap/include/plat/serial.h
rename to arch/arm/mach-omap2/serial.h
index b780470..6a68062 100644
--- a/arch/arm/plat-omap/include/plat/serial.h
+++ b/arch/arm/mach-omap2/serial.h
@@ -29,11 +29,6 @@
*/
#define OMAP_UART_INFO_OFS 0x3ffc
-/* OMAP1 serial ports */
-#define OMAP1_UART1_BASE 0xfffb0000
-#define OMAP1_UART2_BASE 0xfffb0800
-#define OMAP1_UART3_BASE 0xfffb9800
-
/* OMAP2 serial ports */
#define OMAP2_UART1_BASE 0x4806a000
#define OMAP2_UART2_BASE 0x4806c000
@@ -76,20 +71,14 @@
#define ZOOM_UART_VIRT 0xfa400000
#define OMAP_PORT_SHIFT 2
-#define OMAP7XX_PORT_SHIFT 0
#define ZOOM_PORT_SHIFT 1
-#define OMAP1510_BASE_BAUD (12000000/16)
-#define OMAP16XX_BASE_BAUD (48000000/16)
#define OMAP24XX_BASE_BAUD (48000000/16)
/*
* DEBUG_LL port encoding stored into the UART1 scratchpad register by
* decomp_setup in uncompress.h
*/
-#define OMAP1UART1 11
-#define OMAP1UART2 12
-#define OMAP1UART3 13
#define OMAP2UART1 21
#define OMAP2UART2 22
#define OMAP2UART3 23
next prev parent reply other threads:[~2012-10-04 22:05 UTC|newest]
Thread overview: 79+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-10-04 22:04 [PATCH 00/16] More omap plat header cleanup for v3.8 merge window Tony Lindgren
2012-10-04 22:04 ` Tony Lindgren
2012-10-04 22:04 ` [PATCH 01/16] ARM: OMAP2+: Make board-zoom.h local Tony Lindgren
2012-10-04 22:04 ` Tony Lindgren
2012-10-04 22:04 ` [PATCH 02/16] ARM: OMAP: Split plat-omap/i2c.c into mach-omap1 and mach-omap2 Tony Lindgren
2012-10-04 22:04 ` Tony Lindgren
2012-10-05 8:53 ` Shubhrajyoti
2012-10-05 8:53 ` Shubhrajyoti
2012-10-04 22:04 ` [PATCH 03/16] ARM: OMAP: Make plat/common.h local to " Tony Lindgren
2012-10-04 22:04 ` Tony Lindgren
2012-10-04 22:04 ` [PATCH 04/16] ARM: OMAP: Make plat/fpga.h local to arch/arm/plat-omap Tony Lindgren
2012-10-04 22:04 ` Tony Lindgren
2012-10-04 22:04 ` Tony Lindgren
2012-10-04 22:04 ` [PATCH 05/16] ARM: OMAP1: Move plat/tc.h to mach/tc.h for omap1 Tony Lindgren
2012-10-04 22:04 ` Tony Lindgren
2012-10-04 22:04 ` [PATCH 06/16] ARM: OMAP: Move plat/led.h to include/linux/platform_data Tony Lindgren
2012-10-04 22:04 ` Tony Lindgren
2012-10-04 22:04 ` [PATCH 07/16] ARM: OMAP: Make plat/sram.h local to plat-omap Tony Lindgren
2012-10-04 22:04 ` Tony Lindgren
2012-10-05 13:58 ` Jon Hunter
2012-10-05 13:58 ` Jon Hunter
2012-10-08 16:31 ` Tony Lindgren
2012-10-08 16:31 ` Tony Lindgren
2012-10-04 22:04 ` [PATCH 08/16] ARM: OMAP2: Move plat/menelaus.h to linux/mfd/menelaus.h Tony Lindgren
2012-10-04 22:04 ` Tony Lindgren
2012-10-16 0:11 ` Tony Lindgren
2012-10-16 0:11 ` Tony Lindgren
2012-10-25 11:11 ` Samuel Ortiz
2012-10-25 11:11 ` Samuel Ortiz
2012-10-25 19:03 ` Tony Lindgren
2012-10-25 19:03 ` Tony Lindgren
2012-10-04 22:04 ` [PATCH 09/16] ARM: OMAP: Split plat/mmc.h into local headers and platform_data Tony Lindgren
2012-10-04 22:04 ` Tony Lindgren
2012-10-05 6:38 ` Venkatraman S
2012-10-05 6:38 ` Venkatraman S
2012-10-05 18:09 ` Tony Lindgren
2012-10-05 18:09 ` Tony Lindgren
2012-10-05 18:08 ` [PATCH 09.5/16] mmc: omap: Remove cpu_is_omap usage from the driver Tony Lindgren
2012-10-05 18:08 ` Tony Lindgren
2012-10-05 18:23 ` Chris Ball
2012-10-05 18:23 ` Chris Ball
2012-10-05 19:47 ` Tony Lindgren
2012-10-05 19:47 ` Tony Lindgren
2012-10-16 21:02 ` Tony Lindgren
2012-10-16 21:02 ` Tony Lindgren
2012-10-04 22:04 ` [PATCH 10/16] ARM: OMAP: Make omap_device local to mach-omap2 Tony Lindgren
2012-10-04 22:04 ` Tony Lindgren
2012-10-26 1:27 ` Paul Walmsley
2012-10-26 1:27 ` Paul Walmsley
2012-10-26 16:39 ` Tony Lindgren
2012-10-26 16:39 ` Tony Lindgren
2012-10-26 17:02 ` Paul Walmsley
2012-10-26 17:02 ` Paul Walmsley
2012-10-26 17:10 ` Tony Lindgren
2012-10-26 17:10 ` Tony Lindgren
2012-10-26 20:18 ` Paul Walmsley
2012-10-26 20:18 ` Paul Walmsley
2012-10-26 20:37 ` Tony Lindgren
2012-10-26 20:37 ` Tony Lindgren
2012-10-26 20:45 ` Paul Walmsley
2012-10-26 20:45 ` Paul Walmsley
2012-10-04 22:04 ` [PATCH 11/16] ARM: OMAP: Make plat/omap_hwmod.h " Tony Lindgren
2012-10-04 22:04 ` Tony Lindgren
2012-10-04 22:05 ` [PATCH 12/16] ARM: OMAP: Merge plat/multi.h into plat/cpu.h Tony Lindgren
2012-10-04 22:05 ` Tony Lindgren
2012-10-04 22:05 ` [PATCH 13/16] ARM: OMAP: Split uncompress.h to mach-omap1 and mach-omap2 Tony Lindgren
2012-10-04 22:05 ` Tony Lindgren
2012-10-04 22:05 ` Tony Lindgren [this message]
2012-10-04 22:05 ` [PATCH 14/16] ARM: OMAP: Split plat/serial.h for omap1 and omap2+ Tony Lindgren
2012-10-04 22:05 ` [PATCH 15/16] ARM: OMAP: Move plat/omap-serial.h to linux/platform_data/serial-omap.h Tony Lindgren
2012-10-04 22:05 ` Tony Lindgren
2012-10-04 22:05 ` [PATCH 16/16] ARM: OMAP: Make plat/omap-pm.h local to mach-omap2 Tony Lindgren
2012-10-04 22:05 ` Tony Lindgren
2012-10-04 22:26 ` Laurent Pinchart
2012-10-04 22:26 ` Laurent Pinchart
2012-10-08 8:52 ` [PATCH 00/16] More omap plat header cleanup for v3.8 merge window Santosh Shilimkar
2012-10-08 8:52 ` Santosh Shilimkar
2012-10-08 9:24 ` Santosh Shilimkar
2012-10-08 9:24 ` Santosh Shilimkar
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20121004220505.26676.15846.stgit@muffinssi.local \
--to=tony@atomide.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-omap@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.