From: Kalle Valo <kvalo@qca.qualcomm.com> To: <ath10k@lists.infradead.org> Cc: <linux-wireless@vger.kernel.org> Subject: [PATCH v2 0/8] ath10k: Add thermal mitigation support Date: Wed, 17 Dec 2014 12:20:35 +0200 [thread overview] Message-ID: <20141217101755.15964.2625.stgit@potku.adurom.net> (raw) The following patches add thermal sensor and thermal cooling device support in ath10k. For sensor, hwmon interface is used. For controlling temperature cooling device interface is used. For thermal mitigation, tx throttling is done using hw MAC quiet time setting. v2: * use ATH10K_FW_IE_WMI_OP_VERSION instead of a feature flag * add separate wmi mappings for 10.2.4 * bump up FW API to 4 * new patch: ath10k: set max_num_vdevs based on wmi op version * new patch: ath10k: use wmi op version to check which iface combination to use * new patch: ath10k: print ath10k wmi op version --- Kalle Valo (3): ath10k: set max_num_vdevs based on wmi op version ath10k: use wmi op version to check which iface combination to use ath10k: print ath10k wmi op version Rajkumar Manoharan (5): ath10k: add 10.2.4 firmware support ath10k: add wmi support for pdev_set_quiet_mode ath10k: add thermal cooling device support ath10k: add wmi interface for pdev_get_temperature ath10k: add thermal sensor device support drivers/net/wireless/ath/ath10k/Makefile | 1 drivers/net/wireless/ath/ath10k/core.c | 30 ++ drivers/net/wireless/ath/ath10k/core.h | 4 drivers/net/wireless/ath/ath10k/debug.c | 7 - drivers/net/wireless/ath/ath10k/hw.h | 4 drivers/net/wireless/ath/ath10k/mac.c | 22 +- drivers/net/wireless/ath/ath10k/thermal.c | 238 +++++++++++++++++++ drivers/net/wireless/ath/ath10k/thermal.h | 58 +++++ drivers/net/wireless/ath/ath10k/wmi-ops.h | 39 +++ drivers/net/wireless/ath/ath10k/wmi-tlv.c | 3 drivers/net/wireless/ath/ath10k/wmi.c | 355 +++++++++++++++++++++++++++++ drivers/net/wireless/ath/ath10k/wmi.h | 20 ++ 12 files changed, 764 insertions(+), 17 deletions(-) create mode 100644 drivers/net/wireless/ath/ath10k/thermal.c create mode 100644 drivers/net/wireless/ath/ath10k/thermal.h
WARNING: multiple messages have this Message-ID (diff)
From: Kalle Valo <kvalo@qca.qualcomm.com> To: ath10k@lists.infradead.org Cc: linux-wireless@vger.kernel.org Subject: [PATCH v2 0/8] ath10k: Add thermal mitigation support Date: Wed, 17 Dec 2014 12:20:35 +0200 [thread overview] Message-ID: <20141217101755.15964.2625.stgit@potku.adurom.net> (raw) The following patches add thermal sensor and thermal cooling device support in ath10k. For sensor, hwmon interface is used. For controlling temperature cooling device interface is used. For thermal mitigation, tx throttling is done using hw MAC quiet time setting. v2: * use ATH10K_FW_IE_WMI_OP_VERSION instead of a feature flag * add separate wmi mappings for 10.2.4 * bump up FW API to 4 * new patch: ath10k: set max_num_vdevs based on wmi op version * new patch: ath10k: use wmi op version to check which iface combination to use * new patch: ath10k: print ath10k wmi op version --- Kalle Valo (3): ath10k: set max_num_vdevs based on wmi op version ath10k: use wmi op version to check which iface combination to use ath10k: print ath10k wmi op version Rajkumar Manoharan (5): ath10k: add 10.2.4 firmware support ath10k: add wmi support for pdev_set_quiet_mode ath10k: add thermal cooling device support ath10k: add wmi interface for pdev_get_temperature ath10k: add thermal sensor device support drivers/net/wireless/ath/ath10k/Makefile | 1 drivers/net/wireless/ath/ath10k/core.c | 30 ++ drivers/net/wireless/ath/ath10k/core.h | 4 drivers/net/wireless/ath/ath10k/debug.c | 7 - drivers/net/wireless/ath/ath10k/hw.h | 4 drivers/net/wireless/ath/ath10k/mac.c | 22 +- drivers/net/wireless/ath/ath10k/thermal.c | 238 +++++++++++++++++++ drivers/net/wireless/ath/ath10k/thermal.h | 58 +++++ drivers/net/wireless/ath/ath10k/wmi-ops.h | 39 +++ drivers/net/wireless/ath/ath10k/wmi-tlv.c | 3 drivers/net/wireless/ath/ath10k/wmi.c | 355 +++++++++++++++++++++++++++++ drivers/net/wireless/ath/ath10k/wmi.h | 20 ++ 12 files changed, 764 insertions(+), 17 deletions(-) create mode 100644 drivers/net/wireless/ath/ath10k/thermal.c create mode 100644 drivers/net/wireless/ath/ath10k/thermal.h _______________________________________________ ath10k mailing list ath10k@lists.infradead.org http://lists.infradead.org/mailman/listinfo/ath10k
next reply other threads:[~2014-12-17 10:20 UTC|newest] Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top 2014-12-17 10:20 Kalle Valo [this message] 2014-12-17 10:20 ` [PATCH v2 0/8] ath10k: Add thermal mitigation support Kalle Valo 2014-12-17 10:20 ` [PATCH v2 1/8] ath10k: set max_num_vdevs based on wmi op version Kalle Valo 2014-12-17 10:20 ` Kalle Valo 2014-12-17 10:20 ` [PATCH v2 2/8] ath10k: use wmi op version to check which iface combination to use Kalle Valo 2014-12-17 10:20 ` Kalle Valo 2014-12-17 10:21 ` [PATCH v2 3/8] ath10k: print ath10k wmi op version Kalle Valo 2014-12-17 10:21 ` Kalle Valo 2014-12-17 10:21 ` [PATCH v2 4/8] ath10k: add 10.2.4 firmware support Kalle Valo 2014-12-17 10:21 ` Kalle Valo 2014-12-17 10:21 ` [PATCH v2 5/8] ath10k: add wmi support for pdev_set_quiet_mode Kalle Valo 2014-12-17 10:21 ` Kalle Valo 2014-12-17 10:22 ` [PATCH v2 6/8] ath10k: add thermal cooling device support Kalle Valo 2014-12-17 10:22 ` Kalle Valo 2014-12-17 10:22 ` [PATCH v2 7/8] ath10k: add wmi interface for pdev_get_temperature Kalle Valo 2014-12-17 10:22 ` Kalle Valo 2014-12-17 10:22 ` [PATCH v2 8/8] ath10k: add thermal sensor device support Kalle Valo 2014-12-17 10:22 ` Kalle Valo 2014-12-17 18:56 ` Sebastian Gottschall [not found] ` <5491D20F.2020202@dd-wrt.com> 2014-12-23 17:43 ` Kalle Valo 2014-12-23 17:43 ` Kalle Valo 2014-12-23 19:52 ` Sebastian Gottschall 2014-12-23 19:52 ` Sebastian Gottschall 2014-12-23 15:21 ` [PATCH v2 0/8] ath10k: Add thermal mitigation support Kalle Valo 2014-12-23 15:21 ` Kalle Valo
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20141217101755.15964.2625.stgit@potku.adurom.net \ --to=kvalo@qca.qualcomm.com \ --cc=ath10k@lists.infradead.org \ --cc=linux-wireless@vger.kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.