From: Kalle Valo <kvalo@qca.qualcomm.com>
To: <ath10k@lists.infradead.org>
Cc: <linux-wireless@vger.kernel.org>
Subject: [PATCH v2 7/8] ath10k: add wmi interface for pdev_get_temperature
Date: Wed, 17 Dec 2014 12:22:17 +0200 [thread overview]
Message-ID: <20141217102217.15964.69792.stgit@potku.adurom.net> (raw)
In-Reply-To: <20141217101755.15964.2625.stgit@potku.adurom.net>
From: Rajkumar Manoharan <rmanohar@qti.qualcomm.com>
Add WMI command support for reading temperature from the target and
corresponding WMI temperature event handler. The pdev_get_temperature
command is currently supported in 10.2 firmware alone.
Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
---
drivers/net/wireless/ath/ath10k/wmi-ops.h | 17 ++++++++++++++
drivers/net/wireless/ath/ath10k/wmi-tlv.c | 2 ++
drivers/net/wireless/ath/ath10k/wmi.c | 35 +++++++++++++++++++++++++++++
drivers/net/wireless/ath/ath10k/wmi.h | 13 +++++++++++
4 files changed, 67 insertions(+)
diff --git a/drivers/net/wireless/ath/ath10k/wmi-ops.h b/drivers/net/wireless/ath/ath10k/wmi-ops.h
index feed0fe5e117..20e2c3002bb5 100644
--- a/drivers/net/wireless/ath/ath10k/wmi-ops.h
+++ b/drivers/net/wireless/ath/ath10k/wmi-ops.h
@@ -118,6 +118,7 @@ struct wmi_ops {
u32 period, u32 duration,
u32 next_offset,
u32 enabled);
+ struct sk_buff *(*gen_pdev_get_temperature)(struct ath10k *ar);
};
int ath10k_wmi_cmd_send(struct ath10k *ar, struct sk_buff *skb, u32 cmd_id);
@@ -840,4 +841,20 @@ ath10k_wmi_pdev_set_quiet_mode(struct ath10k *ar, u32 period, u32 duration,
ar->wmi.cmd->pdev_set_quiet_mode_cmdid);
}
+static inline int
+ath10k_wmi_pdev_get_temperature(struct ath10k *ar)
+{
+ struct sk_buff *skb;
+
+ if (!ar->wmi.ops->gen_pdev_get_temperature)
+ return -EOPNOTSUPP;
+
+ skb = ar->wmi.ops->gen_pdev_get_temperature(ar);
+ if (IS_ERR(skb))
+ return PTR_ERR(skb);
+
+ return ath10k_wmi_cmd_send(ar, skb,
+ ar->wmi.cmd->pdev_get_temperature_cmdid);
+}
+
#endif
diff --git a/drivers/net/wireless/ath/ath10k/wmi-tlv.c b/drivers/net/wireless/ath/ath10k/wmi-tlv.c
index e203dadf1c0f..4c050cec3966 100644
--- a/drivers/net/wireless/ath/ath10k/wmi-tlv.c
+++ b/drivers/net/wireless/ath/ath10k/wmi-tlv.c
@@ -2044,6 +2044,7 @@ static struct wmi_cmd_map wmi_tlv_cmd_map = {
.force_fw_hang_cmdid = WMI_TLV_FORCE_FW_HANG_CMDID,
.gpio_config_cmdid = WMI_TLV_GPIO_CONFIG_CMDID,
.gpio_output_cmdid = WMI_TLV_GPIO_OUTPUT_CMDID,
+ .pdev_get_temperature_cmdid = WMI_TLV_CMD_UNSUPPORTED,
};
static struct wmi_pdev_param_map wmi_tlv_pdev_param_map = {
@@ -2205,6 +2206,7 @@ static const struct wmi_ops wmi_tlv_ops = {
.gen_pktlog_enable = ath10k_wmi_tlv_op_gen_pktlog_enable,
.gen_pktlog_disable = ath10k_wmi_tlv_op_gen_pktlog_disable,
/* .gen_pdev_set_quiet_mode not implemented */
+ /* .gen_pdev_get_temperature not implemented */
};
/************/
diff --git a/drivers/net/wireless/ath/ath10k/wmi.c b/drivers/net/wireless/ath/ath10k/wmi.c
index 77bb3313ca47..c2d7ac31fd78 100644
--- a/drivers/net/wireless/ath/ath10k/wmi.c
+++ b/drivers/net/wireless/ath/ath10k/wmi.c
@@ -145,6 +145,7 @@ static struct wmi_cmd_map wmi_cmd_map = {
.force_fw_hang_cmdid = WMI_FORCE_FW_HANG_CMDID,
.gpio_config_cmdid = WMI_GPIO_CONFIG_CMDID,
.gpio_output_cmdid = WMI_GPIO_OUTPUT_CMDID,
+ .pdev_get_temperature_cmdid = WMI_CMD_UNSUPPORTED,
};
/* 10.X WMI cmd track */
@@ -267,6 +268,7 @@ static struct wmi_cmd_map wmi_10x_cmd_map = {
.force_fw_hang_cmdid = WMI_CMD_UNSUPPORTED,
.gpio_config_cmdid = WMI_10X_GPIO_CONFIG_CMDID,
.gpio_output_cmdid = WMI_10X_GPIO_OUTPUT_CMDID,
+ .pdev_get_temperature_cmdid = WMI_CMD_UNSUPPORTED,
};
/* 10.2.4 WMI cmd track */
@@ -388,6 +390,7 @@ static struct wmi_cmd_map wmi_10_2_4_cmd_map = {
.force_fw_hang_cmdid = WMI_CMD_UNSUPPORTED,
.gpio_config_cmdid = WMI_10_2_GPIO_CONFIG_CMDID,
.gpio_output_cmdid = WMI_10_2_GPIO_OUTPUT_CMDID,
+ .pdev_get_temperature_cmdid = WMI_10_2_PDEV_GET_TEMPERATURE_CMDID,
};
/* MAIN WMI VDEV param map */
@@ -843,6 +846,7 @@ static struct wmi_cmd_map wmi_10_2_cmd_map = {
.force_fw_hang_cmdid = WMI_CMD_UNSUPPORTED,
.gpio_config_cmdid = WMI_10_2_GPIO_CONFIG_CMDID,
.gpio_output_cmdid = WMI_10_2_GPIO_OUTPUT_CMDID,
+ .pdev_get_temperature_cmdid = WMI_CMD_UNSUPPORTED,
};
void ath10k_wmi_put_wmi_channel(struct wmi_channel *ch,
@@ -3026,6 +3030,17 @@ int ath10k_wmi_event_ready(struct ath10k *ar, struct sk_buff *skb)
return 0;
}
+static int ath10k_wmi_event_temperature(struct ath10k *ar, struct sk_buff *skb)
+{
+ const struct wmi_pdev_temperature_event *ev;
+
+ ev = (struct wmi_pdev_temperature_event *)skb->data;
+ if (WARN_ON(skb->len < sizeof(*ev)))
+ return -EPROTO;
+
+ return 0;
+}
+
static void ath10k_wmi_op_rx(struct ath10k *ar, struct sk_buff *skb)
{
struct wmi_cmd_hdr *cmd_hdr;
@@ -3365,6 +3380,9 @@ static void ath10k_wmi_10_2_op_rx(struct ath10k *ar, struct sk_buff *skb)
case WMI_10_2_READY_EVENTID:
ath10k_wmi_event_ready(ar, skb);
break;
+ case WMI_10_2_PDEV_TEMPERATURE_EVENTID:
+ ath10k_wmi_event_temperature(ar, skb);
+ break;
case WMI_10_2_RTT_KEEPALIVE_EVENTID:
case WMI_10_2_GPIO_INPUT_EVENTID:
case WMI_10_2_PEER_RATECODE_LIST_EVENTID:
@@ -4646,6 +4664,19 @@ ath10k_wmi_10_2_op_gen_peer_assoc(struct ath10k *ar,
return skb;
}
+static struct sk_buff *
+ath10k_wmi_10_2_op_gen_pdev_get_temperature(struct ath10k *ar)
+{
+ struct sk_buff *skb;
+
+ skb = ath10k_wmi_alloc_skb(ar, 0);
+ if (!skb)
+ return ERR_PTR(-ENOMEM);
+
+ ath10k_dbg(ar, ATH10K_DBG_WMI, "wmi pdev get temperature\n");
+ return skb;
+}
+
/* This function assumes the beacon is already DMA mapped */
static struct sk_buff *
ath10k_wmi_op_gen_beacon_dma(struct ath10k_vif *arvif)
@@ -4895,6 +4926,7 @@ static const struct wmi_ops wmi_ops = {
.gen_pktlog_enable = ath10k_wmi_op_gen_pktlog_enable,
.gen_pktlog_disable = ath10k_wmi_op_gen_pktlog_disable,
.gen_pdev_set_quiet_mode = ath10k_wmi_op_gen_pdev_set_quiet_mode,
+ /* .gen_pdev_get_temperature not implemented */
};
static const struct wmi_ops wmi_10_1_ops = {
@@ -4906,6 +4938,7 @@ static const struct wmi_ops wmi_10_1_ops = {
.gen_pdev_set_rd = ath10k_wmi_10x_op_gen_pdev_set_rd,
.gen_start_scan = ath10k_wmi_10x_op_gen_start_scan,
.gen_peer_assoc = ath10k_wmi_10_1_op_gen_peer_assoc,
+ /* .gen_pdev_get_temperature not implemented */
/* shared with main branch */
.pull_scan = ath10k_wmi_op_pull_scan_ev,
@@ -4954,6 +4987,7 @@ static const struct wmi_ops wmi_10_2_ops = {
.rx = ath10k_wmi_10_2_op_rx,
.gen_init = ath10k_wmi_10_2_op_gen_init,
.gen_peer_assoc = ath10k_wmi_10_2_op_gen_peer_assoc,
+ /* .gen_pdev_get_temperature not implemented */
/* shared with 10.1 */
.map_svc = wmi_10x_svc_map,
@@ -5008,6 +5042,7 @@ static const struct wmi_ops wmi_10_2_4_ops = {
.rx = ath10k_wmi_10_2_op_rx,
.gen_init = ath10k_wmi_10_2_op_gen_init,
.gen_peer_assoc = ath10k_wmi_10_2_op_gen_peer_assoc,
+ .gen_pdev_get_temperature = ath10k_wmi_10_2_op_gen_pdev_get_temperature,
/* shared with 10.1 */
.map_svc = wmi_10x_svc_map,
diff --git a/drivers/net/wireless/ath/ath10k/wmi.h b/drivers/net/wireless/ath/ath10k/wmi.h
index ce517bf547f2..f26531fcc5f3 100644
--- a/drivers/net/wireless/ath/ath10k/wmi.h
+++ b/drivers/net/wireless/ath/ath10k/wmi.h
@@ -550,6 +550,7 @@ struct wmi_cmd_map {
u32 force_fw_hang_cmdid;
u32 gpio_config_cmdid;
u32 gpio_output_cmdid;
+ u32 pdev_get_temperature_cmdid;
};
/*
@@ -1154,6 +1155,11 @@ enum wmi_10_2_cmd_id {
WMI_10_2_PDEV_SET_MIMOGAIN_TABLE_CMDID,
WMI_10_2_PDEV_RATEPWR_TABLE_CMDID,
WMI_10_2_PDEV_RATEPWR_CHAINMSK_TABLE_CMDID,
+ WMI_10_2_PDEV_GET_INFO,
+ WMI_10_2_VDEV_GET_INFO,
+ WMI_10_2_VDEV_ATF_REQUEST_CMDID,
+ WMI_10_2_PEER_ATF_REQUEST_CMDID,
+ WMI_10_2_PDEV_GET_TEMPERATURE_CMDID,
WMI_10_2_PDEV_UTF_CMDID = WMI_10_2_END_CMDID - 1,
};
@@ -1195,6 +1201,8 @@ enum wmi_10_2_event_id {
WMI_10_2_MCAST_BUF_RELEASE_EVENTID,
WMI_10_2_MCAST_LIST_AGEOUT_EVENTID,
WMI_10_2_WDS_PEER_EVENTID,
+ WMI_10_2_PEER_STA_PS_STATECHG_EVENTID,
+ WMI_10_2_PDEV_TEMPERATURE_EVENTID,
WMI_10_2_PDEV_UTF_EVENTID = WMI_10_2_END_EVENTID - 1,
};
@@ -4733,6 +4741,11 @@ struct wmi_rdy_ev_arg {
const u8 *mac_addr;
};
+struct wmi_pdev_temperature_event {
+ /* temperature value in Celcius degree */
+ __le32 temperature;
+} __packed;
+
struct ath10k;
struct ath10k_vif;
struct ath10k_fw_stats_pdev;
WARNING: multiple messages have this Message-ID (diff)
From: Kalle Valo <kvalo@qca.qualcomm.com>
To: ath10k@lists.infradead.org
Cc: linux-wireless@vger.kernel.org
Subject: [PATCH v2 7/8] ath10k: add wmi interface for pdev_get_temperature
Date: Wed, 17 Dec 2014 12:22:17 +0200 [thread overview]
Message-ID: <20141217102217.15964.69792.stgit@potku.adurom.net> (raw)
In-Reply-To: <20141217101755.15964.2625.stgit@potku.adurom.net>
From: Rajkumar Manoharan <rmanohar@qti.qualcomm.com>
Add WMI command support for reading temperature from the target and
corresponding WMI temperature event handler. The pdev_get_temperature
command is currently supported in 10.2 firmware alone.
Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
---
drivers/net/wireless/ath/ath10k/wmi-ops.h | 17 ++++++++++++++
drivers/net/wireless/ath/ath10k/wmi-tlv.c | 2 ++
drivers/net/wireless/ath/ath10k/wmi.c | 35 +++++++++++++++++++++++++++++
drivers/net/wireless/ath/ath10k/wmi.h | 13 +++++++++++
4 files changed, 67 insertions(+)
diff --git a/drivers/net/wireless/ath/ath10k/wmi-ops.h b/drivers/net/wireless/ath/ath10k/wmi-ops.h
index feed0fe5e117..20e2c3002bb5 100644
--- a/drivers/net/wireless/ath/ath10k/wmi-ops.h
+++ b/drivers/net/wireless/ath/ath10k/wmi-ops.h
@@ -118,6 +118,7 @@ struct wmi_ops {
u32 period, u32 duration,
u32 next_offset,
u32 enabled);
+ struct sk_buff *(*gen_pdev_get_temperature)(struct ath10k *ar);
};
int ath10k_wmi_cmd_send(struct ath10k *ar, struct sk_buff *skb, u32 cmd_id);
@@ -840,4 +841,20 @@ ath10k_wmi_pdev_set_quiet_mode(struct ath10k *ar, u32 period, u32 duration,
ar->wmi.cmd->pdev_set_quiet_mode_cmdid);
}
+static inline int
+ath10k_wmi_pdev_get_temperature(struct ath10k *ar)
+{
+ struct sk_buff *skb;
+
+ if (!ar->wmi.ops->gen_pdev_get_temperature)
+ return -EOPNOTSUPP;
+
+ skb = ar->wmi.ops->gen_pdev_get_temperature(ar);
+ if (IS_ERR(skb))
+ return PTR_ERR(skb);
+
+ return ath10k_wmi_cmd_send(ar, skb,
+ ar->wmi.cmd->pdev_get_temperature_cmdid);
+}
+
#endif
diff --git a/drivers/net/wireless/ath/ath10k/wmi-tlv.c b/drivers/net/wireless/ath/ath10k/wmi-tlv.c
index e203dadf1c0f..4c050cec3966 100644
--- a/drivers/net/wireless/ath/ath10k/wmi-tlv.c
+++ b/drivers/net/wireless/ath/ath10k/wmi-tlv.c
@@ -2044,6 +2044,7 @@ static struct wmi_cmd_map wmi_tlv_cmd_map = {
.force_fw_hang_cmdid = WMI_TLV_FORCE_FW_HANG_CMDID,
.gpio_config_cmdid = WMI_TLV_GPIO_CONFIG_CMDID,
.gpio_output_cmdid = WMI_TLV_GPIO_OUTPUT_CMDID,
+ .pdev_get_temperature_cmdid = WMI_TLV_CMD_UNSUPPORTED,
};
static struct wmi_pdev_param_map wmi_tlv_pdev_param_map = {
@@ -2205,6 +2206,7 @@ static const struct wmi_ops wmi_tlv_ops = {
.gen_pktlog_enable = ath10k_wmi_tlv_op_gen_pktlog_enable,
.gen_pktlog_disable = ath10k_wmi_tlv_op_gen_pktlog_disable,
/* .gen_pdev_set_quiet_mode not implemented */
+ /* .gen_pdev_get_temperature not implemented */
};
/************/
diff --git a/drivers/net/wireless/ath/ath10k/wmi.c b/drivers/net/wireless/ath/ath10k/wmi.c
index 77bb3313ca47..c2d7ac31fd78 100644
--- a/drivers/net/wireless/ath/ath10k/wmi.c
+++ b/drivers/net/wireless/ath/ath10k/wmi.c
@@ -145,6 +145,7 @@ static struct wmi_cmd_map wmi_cmd_map = {
.force_fw_hang_cmdid = WMI_FORCE_FW_HANG_CMDID,
.gpio_config_cmdid = WMI_GPIO_CONFIG_CMDID,
.gpio_output_cmdid = WMI_GPIO_OUTPUT_CMDID,
+ .pdev_get_temperature_cmdid = WMI_CMD_UNSUPPORTED,
};
/* 10.X WMI cmd track */
@@ -267,6 +268,7 @@ static struct wmi_cmd_map wmi_10x_cmd_map = {
.force_fw_hang_cmdid = WMI_CMD_UNSUPPORTED,
.gpio_config_cmdid = WMI_10X_GPIO_CONFIG_CMDID,
.gpio_output_cmdid = WMI_10X_GPIO_OUTPUT_CMDID,
+ .pdev_get_temperature_cmdid = WMI_CMD_UNSUPPORTED,
};
/* 10.2.4 WMI cmd track */
@@ -388,6 +390,7 @@ static struct wmi_cmd_map wmi_10_2_4_cmd_map = {
.force_fw_hang_cmdid = WMI_CMD_UNSUPPORTED,
.gpio_config_cmdid = WMI_10_2_GPIO_CONFIG_CMDID,
.gpio_output_cmdid = WMI_10_2_GPIO_OUTPUT_CMDID,
+ .pdev_get_temperature_cmdid = WMI_10_2_PDEV_GET_TEMPERATURE_CMDID,
};
/* MAIN WMI VDEV param map */
@@ -843,6 +846,7 @@ static struct wmi_cmd_map wmi_10_2_cmd_map = {
.force_fw_hang_cmdid = WMI_CMD_UNSUPPORTED,
.gpio_config_cmdid = WMI_10_2_GPIO_CONFIG_CMDID,
.gpio_output_cmdid = WMI_10_2_GPIO_OUTPUT_CMDID,
+ .pdev_get_temperature_cmdid = WMI_CMD_UNSUPPORTED,
};
void ath10k_wmi_put_wmi_channel(struct wmi_channel *ch,
@@ -3026,6 +3030,17 @@ int ath10k_wmi_event_ready(struct ath10k *ar, struct sk_buff *skb)
return 0;
}
+static int ath10k_wmi_event_temperature(struct ath10k *ar, struct sk_buff *skb)
+{
+ const struct wmi_pdev_temperature_event *ev;
+
+ ev = (struct wmi_pdev_temperature_event *)skb->data;
+ if (WARN_ON(skb->len < sizeof(*ev)))
+ return -EPROTO;
+
+ return 0;
+}
+
static void ath10k_wmi_op_rx(struct ath10k *ar, struct sk_buff *skb)
{
struct wmi_cmd_hdr *cmd_hdr;
@@ -3365,6 +3380,9 @@ static void ath10k_wmi_10_2_op_rx(struct ath10k *ar, struct sk_buff *skb)
case WMI_10_2_READY_EVENTID:
ath10k_wmi_event_ready(ar, skb);
break;
+ case WMI_10_2_PDEV_TEMPERATURE_EVENTID:
+ ath10k_wmi_event_temperature(ar, skb);
+ break;
case WMI_10_2_RTT_KEEPALIVE_EVENTID:
case WMI_10_2_GPIO_INPUT_EVENTID:
case WMI_10_2_PEER_RATECODE_LIST_EVENTID:
@@ -4646,6 +4664,19 @@ ath10k_wmi_10_2_op_gen_peer_assoc(struct ath10k *ar,
return skb;
}
+static struct sk_buff *
+ath10k_wmi_10_2_op_gen_pdev_get_temperature(struct ath10k *ar)
+{
+ struct sk_buff *skb;
+
+ skb = ath10k_wmi_alloc_skb(ar, 0);
+ if (!skb)
+ return ERR_PTR(-ENOMEM);
+
+ ath10k_dbg(ar, ATH10K_DBG_WMI, "wmi pdev get temperature\n");
+ return skb;
+}
+
/* This function assumes the beacon is already DMA mapped */
static struct sk_buff *
ath10k_wmi_op_gen_beacon_dma(struct ath10k_vif *arvif)
@@ -4895,6 +4926,7 @@ static const struct wmi_ops wmi_ops = {
.gen_pktlog_enable = ath10k_wmi_op_gen_pktlog_enable,
.gen_pktlog_disable = ath10k_wmi_op_gen_pktlog_disable,
.gen_pdev_set_quiet_mode = ath10k_wmi_op_gen_pdev_set_quiet_mode,
+ /* .gen_pdev_get_temperature not implemented */
};
static const struct wmi_ops wmi_10_1_ops = {
@@ -4906,6 +4938,7 @@ static const struct wmi_ops wmi_10_1_ops = {
.gen_pdev_set_rd = ath10k_wmi_10x_op_gen_pdev_set_rd,
.gen_start_scan = ath10k_wmi_10x_op_gen_start_scan,
.gen_peer_assoc = ath10k_wmi_10_1_op_gen_peer_assoc,
+ /* .gen_pdev_get_temperature not implemented */
/* shared with main branch */
.pull_scan = ath10k_wmi_op_pull_scan_ev,
@@ -4954,6 +4987,7 @@ static const struct wmi_ops wmi_10_2_ops = {
.rx = ath10k_wmi_10_2_op_rx,
.gen_init = ath10k_wmi_10_2_op_gen_init,
.gen_peer_assoc = ath10k_wmi_10_2_op_gen_peer_assoc,
+ /* .gen_pdev_get_temperature not implemented */
/* shared with 10.1 */
.map_svc = wmi_10x_svc_map,
@@ -5008,6 +5042,7 @@ static const struct wmi_ops wmi_10_2_4_ops = {
.rx = ath10k_wmi_10_2_op_rx,
.gen_init = ath10k_wmi_10_2_op_gen_init,
.gen_peer_assoc = ath10k_wmi_10_2_op_gen_peer_assoc,
+ .gen_pdev_get_temperature = ath10k_wmi_10_2_op_gen_pdev_get_temperature,
/* shared with 10.1 */
.map_svc = wmi_10x_svc_map,
diff --git a/drivers/net/wireless/ath/ath10k/wmi.h b/drivers/net/wireless/ath/ath10k/wmi.h
index ce517bf547f2..f26531fcc5f3 100644
--- a/drivers/net/wireless/ath/ath10k/wmi.h
+++ b/drivers/net/wireless/ath/ath10k/wmi.h
@@ -550,6 +550,7 @@ struct wmi_cmd_map {
u32 force_fw_hang_cmdid;
u32 gpio_config_cmdid;
u32 gpio_output_cmdid;
+ u32 pdev_get_temperature_cmdid;
};
/*
@@ -1154,6 +1155,11 @@ enum wmi_10_2_cmd_id {
WMI_10_2_PDEV_SET_MIMOGAIN_TABLE_CMDID,
WMI_10_2_PDEV_RATEPWR_TABLE_CMDID,
WMI_10_2_PDEV_RATEPWR_CHAINMSK_TABLE_CMDID,
+ WMI_10_2_PDEV_GET_INFO,
+ WMI_10_2_VDEV_GET_INFO,
+ WMI_10_2_VDEV_ATF_REQUEST_CMDID,
+ WMI_10_2_PEER_ATF_REQUEST_CMDID,
+ WMI_10_2_PDEV_GET_TEMPERATURE_CMDID,
WMI_10_2_PDEV_UTF_CMDID = WMI_10_2_END_CMDID - 1,
};
@@ -1195,6 +1201,8 @@ enum wmi_10_2_event_id {
WMI_10_2_MCAST_BUF_RELEASE_EVENTID,
WMI_10_2_MCAST_LIST_AGEOUT_EVENTID,
WMI_10_2_WDS_PEER_EVENTID,
+ WMI_10_2_PEER_STA_PS_STATECHG_EVENTID,
+ WMI_10_2_PDEV_TEMPERATURE_EVENTID,
WMI_10_2_PDEV_UTF_EVENTID = WMI_10_2_END_EVENTID - 1,
};
@@ -4733,6 +4741,11 @@ struct wmi_rdy_ev_arg {
const u8 *mac_addr;
};
+struct wmi_pdev_temperature_event {
+ /* temperature value in Celcius degree */
+ __le32 temperature;
+} __packed;
+
struct ath10k;
struct ath10k_vif;
struct ath10k_fw_stats_pdev;
_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k
next prev parent reply other threads:[~2014-12-17 10:22 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-12-17 10:20 [PATCH v2 0/8] ath10k: Add thermal mitigation support Kalle Valo
2014-12-17 10:20 ` Kalle Valo
2014-12-17 10:20 ` [PATCH v2 1/8] ath10k: set max_num_vdevs based on wmi op version Kalle Valo
2014-12-17 10:20 ` Kalle Valo
2014-12-17 10:20 ` [PATCH v2 2/8] ath10k: use wmi op version to check which iface combination to use Kalle Valo
2014-12-17 10:20 ` Kalle Valo
2014-12-17 10:21 ` [PATCH v2 3/8] ath10k: print ath10k wmi op version Kalle Valo
2014-12-17 10:21 ` Kalle Valo
2014-12-17 10:21 ` [PATCH v2 4/8] ath10k: add 10.2.4 firmware support Kalle Valo
2014-12-17 10:21 ` Kalle Valo
2014-12-17 10:21 ` [PATCH v2 5/8] ath10k: add wmi support for pdev_set_quiet_mode Kalle Valo
2014-12-17 10:21 ` Kalle Valo
2014-12-17 10:22 ` [PATCH v2 6/8] ath10k: add thermal cooling device support Kalle Valo
2014-12-17 10:22 ` Kalle Valo
2014-12-17 10:22 ` Kalle Valo [this message]
2014-12-17 10:22 ` [PATCH v2 7/8] ath10k: add wmi interface for pdev_get_temperature Kalle Valo
2014-12-17 10:22 ` [PATCH v2 8/8] ath10k: add thermal sensor device support Kalle Valo
2014-12-17 10:22 ` Kalle Valo
2014-12-17 18:56 ` Sebastian Gottschall
[not found] ` <5491D20F.2020202@dd-wrt.com>
2014-12-23 17:43 ` Kalle Valo
2014-12-23 17:43 ` Kalle Valo
2014-12-23 19:52 ` Sebastian Gottschall
2014-12-23 19:52 ` Sebastian Gottschall
2014-12-23 15:21 ` [PATCH v2 0/8] ath10k: Add thermal mitigation support Kalle Valo
2014-12-23 15:21 ` Kalle Valo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20141217102217.15964.69792.stgit@potku.adurom.net \
--to=kvalo@qca.qualcomm.com \
--cc=ath10k@lists.infradead.org \
--cc=linux-wireless@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.