All of lore.kernel.org
 help / color / mirror / Atom feed
From: Baruch Siach <baruch@tkos.co.il>
To: arm@kernel.org
Cc: Mark Rutland <mark.rutland@arm.com>,
	devicetree@vger.kernel.org, Arnd Bergmann <arnd@arndb.de>,
	linux-kernel@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH v3 0/4] ARM: Conexant Digicolor CX92755 SoC support
Date: Sun, 25 Jan 2015 20:08:55 +0200	[thread overview]
Message-ID: <20150125180855.GA3148@tarshish> (raw)
In-Reply-To: <cover.1421219953.git.baruch@tkos.co.il>

Hi ARM SoC maintainers,

On Wed, Jan 14, 2015 at 10:40:29AM +0200, Baruch Siach wrote:
> This series adds initial support for the Conexant CX92755 SoC. The CX92755 is
> one of the Digicolor series of SoCs, all sharing many of the same peripherals.
> The code was tested on the CX92755 evaluation kit, AKA Equinox.
> 
> Uses attempting to try this code will most likely also want the UART/console
> driver available from https://patchwork.kernel.org/patch/5515861/.

Any chance of having this series merged for 3.20? Arnd has acked this already.

Thanks,
baruch

> v3:
>    * Remove earlyprintk from dts bootargs (Arnd Bergmann)
> 
>    * Move aliases from chip .dtsi to board .dts (Arnd Bergmann)
> 
>    * Add 'cpus' node (Mark Rutland)
> 
>    * Add commit log messages to all patches (Arnd Bergmann)
> 
>    * Add Arnd's ack
> 
>    * Split arch/arm stuff from the irq and timer drivers
> 
> v2:
>    http://marc.info/?t=142074613900007&r=1&w=2
> 
>    * Remove .map_io assignment, debug_ll is enabled by default (Arnd Bergmann)
> 
>    * Migrate the irq driver to generic irq chip, simplifying the code somewhat
>      (Arnd Bergmann)
> 
>    * Change the timer dt binding, so that the 'reg' property points to the
>      first "Agent Communication" register. This should improve the chance of
>      reusing this binding for other SoCs in this series.
> 
>    * Add the CONTROL() and COUNT() macros to the timer driver to make the code
>      clearer.
> 
>    * Move arch/arm Kconfig changes from the clocksource driver patch to the
>      base arch support patch to reduce dependency between them
> 
> v1:
>    http://thread.gmane.org/gmane.linux.kernel/1855027
> 
> Baruch Siach (4):
>   ARM: initial support for Conexant Digicolor CX92755 SoC
>   ARM: digicolor: add low level debug support
>   ARM: digicolor: add minimal device tree description
>   ARM: devicetree: document supported Conexant Digicolor SoC
> 
>  .../devicetree/bindings/arm/digicolor.txt          |   6 ++
>  arch/arm/Kconfig                                   |   2 +
>  arch/arm/Kconfig.debug                             |  12 ++-
>  arch/arm/boot/dts/Makefile                         |   1 +
>  arch/arm/boot/dts/conexant_equinox.dts             |  74 ++++++++++++++
>  arch/arm/boot/dts/cx92755.dtsi                     | 107 +++++++++++++++++++++
>  arch/arm/include/debug/digicolor.S                 |  35 +++++++
>  arch/arm/mach-digicolor/Kconfig                    |   5 +
>  arch/arm/mach-digicolor/Makefile                   |   1 +
>  arch/arm/mach-digicolor/digicolor.c                |  18 ++++
>  10 files changed, 259 insertions(+), 2 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/arm/digicolor.txt
>  create mode 100644 arch/arm/boot/dts/conexant_equinox.dts
>  create mode 100644 arch/arm/boot/dts/cx92755.dtsi
>  create mode 100644 arch/arm/include/debug/digicolor.S
>  create mode 100644 arch/arm/mach-digicolor/Kconfig
>  create mode 100644 arch/arm/mach-digicolor/Makefile
>  create mode 100644 arch/arm/mach-digicolor/digicolor.c

-- 
     http://baruch.siach.name/blog/                  ~. .~   Tk Open Systems
=}------------------------------------------------ooO--U--Ooo------------{=
   - baruch@tkos.co.il - tel: +972.2.679.5364, http://www.tkos.co.il -

WARNING: multiple messages have this Message-ID (diff)
From: Baruch Siach <baruch@tkos.co.il>
To: arm@kernel.org
Cc: Mark Rutland <mark.rutland@arm.com>,
	devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
	Arnd Bergmann <arnd@arndb.de>,
	linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH v3 0/4] ARM: Conexant Digicolor CX92755 SoC support
Date: Sun, 25 Jan 2015 20:08:55 +0200	[thread overview]
Message-ID: <20150125180855.GA3148@tarshish> (raw)
In-Reply-To: <cover.1421219953.git.baruch@tkos.co.il>

Hi ARM SoC maintainers,

On Wed, Jan 14, 2015 at 10:40:29AM +0200, Baruch Siach wrote:
> This series adds initial support for the Conexant CX92755 SoC. The CX92755 is
> one of the Digicolor series of SoCs, all sharing many of the same peripherals.
> The code was tested on the CX92755 evaluation kit, AKA Equinox.
> 
> Uses attempting to try this code will most likely also want the UART/console
> driver available from https://patchwork.kernel.org/patch/5515861/.

Any chance of having this series merged for 3.20? Arnd has acked this already.

Thanks,
baruch

> v3:
>    * Remove earlyprintk from dts bootargs (Arnd Bergmann)
> 
>    * Move aliases from chip .dtsi to board .dts (Arnd Bergmann)
> 
>    * Add 'cpus' node (Mark Rutland)
> 
>    * Add commit log messages to all patches (Arnd Bergmann)
> 
>    * Add Arnd's ack
> 
>    * Split arch/arm stuff from the irq and timer drivers
> 
> v2:
>    http://marc.info/?t=142074613900007&r=1&w=2
> 
>    * Remove .map_io assignment, debug_ll is enabled by default (Arnd Bergmann)
> 
>    * Migrate the irq driver to generic irq chip, simplifying the code somewhat
>      (Arnd Bergmann)
> 
>    * Change the timer dt binding, so that the 'reg' property points to the
>      first "Agent Communication" register. This should improve the chance of
>      reusing this binding for other SoCs in this series.
> 
>    * Add the CONTROL() and COUNT() macros to the timer driver to make the code
>      clearer.
> 
>    * Move arch/arm Kconfig changes from the clocksource driver patch to the
>      base arch support patch to reduce dependency between them
> 
> v1:
>    http://thread.gmane.org/gmane.linux.kernel/1855027
> 
> Baruch Siach (4):
>   ARM: initial support for Conexant Digicolor CX92755 SoC
>   ARM: digicolor: add low level debug support
>   ARM: digicolor: add minimal device tree description
>   ARM: devicetree: document supported Conexant Digicolor SoC
> 
>  .../devicetree/bindings/arm/digicolor.txt          |   6 ++
>  arch/arm/Kconfig                                   |   2 +
>  arch/arm/Kconfig.debug                             |  12 ++-
>  arch/arm/boot/dts/Makefile                         |   1 +
>  arch/arm/boot/dts/conexant_equinox.dts             |  74 ++++++++++++++
>  arch/arm/boot/dts/cx92755.dtsi                     | 107 +++++++++++++++++++++
>  arch/arm/include/debug/digicolor.S                 |  35 +++++++
>  arch/arm/mach-digicolor/Kconfig                    |   5 +
>  arch/arm/mach-digicolor/Makefile                   |   1 +
>  arch/arm/mach-digicolor/digicolor.c                |  18 ++++
>  10 files changed, 259 insertions(+), 2 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/arm/digicolor.txt
>  create mode 100644 arch/arm/boot/dts/conexant_equinox.dts
>  create mode 100644 arch/arm/boot/dts/cx92755.dtsi
>  create mode 100644 arch/arm/include/debug/digicolor.S
>  create mode 100644 arch/arm/mach-digicolor/Kconfig
>  create mode 100644 arch/arm/mach-digicolor/Makefile
>  create mode 100644 arch/arm/mach-digicolor/digicolor.c

-- 
     http://baruch.siach.name/blog/                  ~. .~   Tk Open Systems
=}------------------------------------------------ooO--U--Ooo------------{=
   - baruch@tkos.co.il - tel: +972.2.679.5364, http://www.tkos.co.il -

WARNING: multiple messages have this Message-ID (diff)
From: baruch@tkos.co.il (Baruch Siach)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v3 0/4] ARM: Conexant Digicolor CX92755 SoC support
Date: Sun, 25 Jan 2015 20:08:55 +0200	[thread overview]
Message-ID: <20150125180855.GA3148@tarshish> (raw)
In-Reply-To: <cover.1421219953.git.baruch@tkos.co.il>

Hi ARM SoC maintainers,

On Wed, Jan 14, 2015 at 10:40:29AM +0200, Baruch Siach wrote:
> This series adds initial support for the Conexant CX92755 SoC. The CX92755 is
> one of the Digicolor series of SoCs, all sharing many of the same peripherals.
> The code was tested on the CX92755 evaluation kit, AKA Equinox.
> 
> Uses attempting to try this code will most likely also want the UART/console
> driver available from https://patchwork.kernel.org/patch/5515861/.

Any chance of having this series merged for 3.20? Arnd has acked this already.

Thanks,
baruch

> v3:
>    * Remove earlyprintk from dts bootargs (Arnd Bergmann)
> 
>    * Move aliases from chip .dtsi to board .dts (Arnd Bergmann)
> 
>    * Add 'cpus' node (Mark Rutland)
> 
>    * Add commit log messages to all patches (Arnd Bergmann)
> 
>    * Add Arnd's ack
> 
>    * Split arch/arm stuff from the irq and timer drivers
> 
> v2:
>    http://marc.info/?t=142074613900007&r=1&w=2
> 
>    * Remove .map_io assignment, debug_ll is enabled by default (Arnd Bergmann)
> 
>    * Migrate the irq driver to generic irq chip, simplifying the code somewhat
>      (Arnd Bergmann)
> 
>    * Change the timer dt binding, so that the 'reg' property points to the
>      first "Agent Communication" register. This should improve the chance of
>      reusing this binding for other SoCs in this series.
> 
>    * Add the CONTROL() and COUNT() macros to the timer driver to make the code
>      clearer.
> 
>    * Move arch/arm Kconfig changes from the clocksource driver patch to the
>      base arch support patch to reduce dependency between them
> 
> v1:
>    http://thread.gmane.org/gmane.linux.kernel/1855027
> 
> Baruch Siach (4):
>   ARM: initial support for Conexant Digicolor CX92755 SoC
>   ARM: digicolor: add low level debug support
>   ARM: digicolor: add minimal device tree description
>   ARM: devicetree: document supported Conexant Digicolor SoC
> 
>  .../devicetree/bindings/arm/digicolor.txt          |   6 ++
>  arch/arm/Kconfig                                   |   2 +
>  arch/arm/Kconfig.debug                             |  12 ++-
>  arch/arm/boot/dts/Makefile                         |   1 +
>  arch/arm/boot/dts/conexant_equinox.dts             |  74 ++++++++++++++
>  arch/arm/boot/dts/cx92755.dtsi                     | 107 +++++++++++++++++++++
>  arch/arm/include/debug/digicolor.S                 |  35 +++++++
>  arch/arm/mach-digicolor/Kconfig                    |   5 +
>  arch/arm/mach-digicolor/Makefile                   |   1 +
>  arch/arm/mach-digicolor/digicolor.c                |  18 ++++
>  10 files changed, 259 insertions(+), 2 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/arm/digicolor.txt
>  create mode 100644 arch/arm/boot/dts/conexant_equinox.dts
>  create mode 100644 arch/arm/boot/dts/cx92755.dtsi
>  create mode 100644 arch/arm/include/debug/digicolor.S
>  create mode 100644 arch/arm/mach-digicolor/Kconfig
>  create mode 100644 arch/arm/mach-digicolor/Makefile
>  create mode 100644 arch/arm/mach-digicolor/digicolor.c

-- 
     http://baruch.siach.name/blog/                  ~. .~   Tk Open Systems
=}------------------------------------------------ooO--U--Ooo------------{=
   - baruch at tkos.co.il - tel: +972.2.679.5364, http://www.tkos.co.il -

  parent reply	other threads:[~2015-01-25 19:21 UTC|newest]

Thread overview: 29+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-01-14  8:40 [PATCH v3 0/4] ARM: Conexant Digicolor CX92755 SoC support Baruch Siach
2015-01-14  8:40 ` Baruch Siach
2015-01-14  8:40 ` [PATCH v3 1/4] ARM: initial support for Conexant Digicolor CX92755 SoC Baruch Siach
2015-01-14  8:40   ` Baruch Siach
2015-01-27 23:02   ` Olof Johansson
2015-01-27 23:02     ` Olof Johansson
2015-01-14  8:40 ` [PATCH v3 2/4] ARM: digicolor: add low level debug support Baruch Siach
2015-01-14  8:40   ` Baruch Siach
2015-01-27 23:02   ` Olof Johansson
2015-01-27 23:02     ` Olof Johansson
2015-01-27 23:02     ` Olof Johansson
2015-01-14  8:40 ` [PATCH v3 3/4] ARM: digicolor: add minimal device tree description Baruch Siach
2015-01-14  8:40   ` Baruch Siach
2015-01-27 23:01   ` Olof Johansson
2015-01-27 23:01     ` Olof Johansson
2015-01-27 23:01     ` Olof Johansson
2015-01-28 10:48     ` Baruch Siach
2015-01-28 10:48       ` Baruch Siach
2015-01-28 10:48       ` Baruch Siach
2015-01-14  8:40 ` [PATCH v3 4/4] ARM: devicetree: document supported Conexant Digicolor SoC Baruch Siach
2015-01-14  8:40   ` Baruch Siach
2015-01-14  8:40   ` Baruch Siach
2015-01-27 23:02   ` Olof Johansson
2015-01-27 23:02     ` Olof Johansson
2015-01-25 18:08 ` Baruch Siach [this message]
2015-01-25 18:08   ` [PATCH v3 0/4] ARM: Conexant Digicolor CX92755 SoC support Baruch Siach
2015-01-25 18:08   ` Baruch Siach
2015-01-27 23:03   ` Olof Johansson
2015-01-27 23:03     ` Olof Johansson

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20150125180855.GA3148@tarshish \
    --to=baruch@tkos.co.il \
    --cc=arm@kernel.org \
    --cc=arnd@arndb.de \
    --cc=devicetree@vger.kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.