From: Olof Johansson <olof@lixom.net>
To: Baruch Siach <baruch@tkos.co.il>
Cc: arm@kernel.org, Mark Rutland <mark.rutland@arm.com>,
Arnd Bergmann <arnd@arndb.de>,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, devicetree@vger.kernel.org
Subject: Re: [PATCH v3 3/4] ARM: digicolor: add minimal device tree description
Date: Tue, 27 Jan 2015 15:01:41 -0800 [thread overview]
Message-ID: <20150127230141.GA11263@quad.lixom.net> (raw)
In-Reply-To: <474d0849bb30ab4ec323fa4c1bc67b30b31d3884.1421219953.git.baruch@tkos.co.il>
Hi,
On Wed, Jan 14, 2015 at 10:40:32AM +0200, Baruch Siach wrote:
> cx92755.dtsi describes CX92755 on chip peripherals. conexant_equinox.dts
> describes the Equinox evaluation board for the CX92755 SoC.
>
> Acked-by: Arnd Bergmann <arnd@arndb.de>
> Signed-off-by: Baruch Siach <baruch@tkos.co.il>
> ---
> arch/arm/boot/dts/Makefile | 1 +
> arch/arm/boot/dts/conexant_equinox.dts | 74 +++++++++++++++++++++++
> arch/arm/boot/dts/cx92755.dtsi | 107 +++++++++++++++++++++++++++++++++
> 3 files changed, 182 insertions(+)
> create mode 100644 arch/arm/boot/dts/conexant_equinox.dts
> create mode 100644 arch/arm/boot/dts/cx92755.dtsi
>
> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index 91bd5bd62857..fbeb65eaddda 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -75,6 +75,7 @@ dtb-$(CONFIG_ARCH_BRCMSTB) += \
> bcm7445-bcm97445svmb.dtb
> dtb-$(CONFIG_ARCH_DAVINCI) += da850-enbw-cmc.dtb \
> da850-evm.dtb
> +dtb-$(CONFIG_ARCH_DIGICOLOR) += conexant_equinox.dtb
> dtb-$(CONFIG_ARCH_EFM32) += efm32gg-dk3750.dtb
> dtb-$(CONFIG_ARCH_EXYNOS) += exynos3250-monk.dtb \
> exynos3250-rinato.dtb \
> diff --git a/arch/arm/boot/dts/conexant_equinox.dts b/arch/arm/boot/dts/conexant_equinox.dts
> new file mode 100644
> index 000000000000..f33bf5635d47
> --- /dev/null
> +++ b/arch/arm/boot/dts/conexant_equinox.dts
To segment the namespace a bit, we ask that you prefix your dts files with the
platform. What would be a suitable prefix here? conexant? digicolor?
-Olof
WARNING: multiple messages have this Message-ID (diff)
From: Olof Johansson <olof-nZhT3qVonbNeoWH0uzbU5w@public.gmane.org>
To: Baruch Siach <baruch-NswTu9S1W3P6gbPvEgmw2w@public.gmane.org>
Cc: arm-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org,
Mark Rutland <mark.rutland-5wv7dgnIgG8@public.gmane.org>,
Arnd Bergmann <arnd-r2nGTMty4D4@public.gmane.org>,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Subject: Re: [PATCH v3 3/4] ARM: digicolor: add minimal device tree description
Date: Tue, 27 Jan 2015 15:01:41 -0800 [thread overview]
Message-ID: <20150127230141.GA11263@quad.lixom.net> (raw)
In-Reply-To: <474d0849bb30ab4ec323fa4c1bc67b30b31d3884.1421219953.git.baruch-NswTu9S1W3P6gbPvEgmw2w@public.gmane.org>
Hi,
On Wed, Jan 14, 2015 at 10:40:32AM +0200, Baruch Siach wrote:
> cx92755.dtsi describes CX92755 on chip peripherals. conexant_equinox.dts
> describes the Equinox evaluation board for the CX92755 SoC.
>
> Acked-by: Arnd Bergmann <arnd-r2nGTMty4D4@public.gmane.org>
> Signed-off-by: Baruch Siach <baruch-NswTu9S1W3P6gbPvEgmw2w@public.gmane.org>
> ---
> arch/arm/boot/dts/Makefile | 1 +
> arch/arm/boot/dts/conexant_equinox.dts | 74 +++++++++++++++++++++++
> arch/arm/boot/dts/cx92755.dtsi | 107 +++++++++++++++++++++++++++++++++
> 3 files changed, 182 insertions(+)
> create mode 100644 arch/arm/boot/dts/conexant_equinox.dts
> create mode 100644 arch/arm/boot/dts/cx92755.dtsi
>
> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index 91bd5bd62857..fbeb65eaddda 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -75,6 +75,7 @@ dtb-$(CONFIG_ARCH_BRCMSTB) += \
> bcm7445-bcm97445svmb.dtb
> dtb-$(CONFIG_ARCH_DAVINCI) += da850-enbw-cmc.dtb \
> da850-evm.dtb
> +dtb-$(CONFIG_ARCH_DIGICOLOR) += conexant_equinox.dtb
> dtb-$(CONFIG_ARCH_EFM32) += efm32gg-dk3750.dtb
> dtb-$(CONFIG_ARCH_EXYNOS) += exynos3250-monk.dtb \
> exynos3250-rinato.dtb \
> diff --git a/arch/arm/boot/dts/conexant_equinox.dts b/arch/arm/boot/dts/conexant_equinox.dts
> new file mode 100644
> index 000000000000..f33bf5635d47
> --- /dev/null
> +++ b/arch/arm/boot/dts/conexant_equinox.dts
To segment the namespace a bit, we ask that you prefix your dts files with the
platform. What would be a suitable prefix here? conexant? digicolor?
-Olof
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
WARNING: multiple messages have this Message-ID (diff)
From: olof@lixom.net (Olof Johansson)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v3 3/4] ARM: digicolor: add minimal device tree description
Date: Tue, 27 Jan 2015 15:01:41 -0800 [thread overview]
Message-ID: <20150127230141.GA11263@quad.lixom.net> (raw)
In-Reply-To: <474d0849bb30ab4ec323fa4c1bc67b30b31d3884.1421219953.git.baruch@tkos.co.il>
Hi,
On Wed, Jan 14, 2015 at 10:40:32AM +0200, Baruch Siach wrote:
> cx92755.dtsi describes CX92755 on chip peripherals. conexant_equinox.dts
> describes the Equinox evaluation board for the CX92755 SoC.
>
> Acked-by: Arnd Bergmann <arnd@arndb.de>
> Signed-off-by: Baruch Siach <baruch@tkos.co.il>
> ---
> arch/arm/boot/dts/Makefile | 1 +
> arch/arm/boot/dts/conexant_equinox.dts | 74 +++++++++++++++++++++++
> arch/arm/boot/dts/cx92755.dtsi | 107 +++++++++++++++++++++++++++++++++
> 3 files changed, 182 insertions(+)
> create mode 100644 arch/arm/boot/dts/conexant_equinox.dts
> create mode 100644 arch/arm/boot/dts/cx92755.dtsi
>
> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index 91bd5bd62857..fbeb65eaddda 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -75,6 +75,7 @@ dtb-$(CONFIG_ARCH_BRCMSTB) += \
> bcm7445-bcm97445svmb.dtb
> dtb-$(CONFIG_ARCH_DAVINCI) += da850-enbw-cmc.dtb \
> da850-evm.dtb
> +dtb-$(CONFIG_ARCH_DIGICOLOR) += conexant_equinox.dtb
> dtb-$(CONFIG_ARCH_EFM32) += efm32gg-dk3750.dtb
> dtb-$(CONFIG_ARCH_EXYNOS) += exynos3250-monk.dtb \
> exynos3250-rinato.dtb \
> diff --git a/arch/arm/boot/dts/conexant_equinox.dts b/arch/arm/boot/dts/conexant_equinox.dts
> new file mode 100644
> index 000000000000..f33bf5635d47
> --- /dev/null
> +++ b/arch/arm/boot/dts/conexant_equinox.dts
To segment the namespace a bit, we ask that you prefix your dts files with the
platform. What would be a suitable prefix here? conexant? digicolor?
-Olof
next prev parent reply other threads:[~2015-01-27 23:01 UTC|newest]
Thread overview: 29+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-01-14 8:40 [PATCH v3 0/4] ARM: Conexant Digicolor CX92755 SoC support Baruch Siach
2015-01-14 8:40 ` Baruch Siach
2015-01-14 8:40 ` [PATCH v3 1/4] ARM: initial support for Conexant Digicolor CX92755 SoC Baruch Siach
2015-01-14 8:40 ` Baruch Siach
2015-01-27 23:02 ` Olof Johansson
2015-01-27 23:02 ` Olof Johansson
2015-01-14 8:40 ` [PATCH v3 2/4] ARM: digicolor: add low level debug support Baruch Siach
2015-01-14 8:40 ` Baruch Siach
2015-01-27 23:02 ` Olof Johansson
2015-01-27 23:02 ` Olof Johansson
2015-01-27 23:02 ` Olof Johansson
2015-01-14 8:40 ` [PATCH v3 3/4] ARM: digicolor: add minimal device tree description Baruch Siach
2015-01-14 8:40 ` Baruch Siach
2015-01-27 23:01 ` Olof Johansson [this message]
2015-01-27 23:01 ` Olof Johansson
2015-01-27 23:01 ` Olof Johansson
2015-01-28 10:48 ` Baruch Siach
2015-01-28 10:48 ` Baruch Siach
2015-01-28 10:48 ` Baruch Siach
2015-01-14 8:40 ` [PATCH v3 4/4] ARM: devicetree: document supported Conexant Digicolor SoC Baruch Siach
2015-01-14 8:40 ` Baruch Siach
2015-01-14 8:40 ` Baruch Siach
2015-01-27 23:02 ` Olof Johansson
2015-01-27 23:02 ` Olof Johansson
2015-01-25 18:08 ` [PATCH v3 0/4] ARM: Conexant Digicolor CX92755 SoC support Baruch Siach
2015-01-25 18:08 ` Baruch Siach
2015-01-25 18:08 ` Baruch Siach
2015-01-27 23:03 ` Olof Johansson
2015-01-27 23:03 ` Olof Johansson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20150127230141.GA11263@quad.lixom.net \
--to=olof@lixom.net \
--cc=arm@kernel.org \
--cc=arnd@arndb.de \
--cc=baruch@tkos.co.il \
--cc=devicetree@vger.kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mark.rutland@arm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.