From: Nishanth Menon <nm@ti.com>
To: Russell King <linux@armlinux.org.uk>,
Mark Rutland <mark.rutland@arm.com>,
Rob Herring <robh+dt@kernel.org>,
Santosh Shilimkar <ssantosh@kernel.org>
Cc: <linux-kernel@vger.kernel.org>, <devicetree@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>, <afd@ti.com>,
Nishanth Menon <nm@ti.com>
Subject: [PATCH V2 2/8] ARM: dts: keystone*: Use a single soc0 instance
Date: Sat, 16 Dec 2017 14:40:34 -0600 [thread overview]
Message-ID: <20171216204040.18017-3-nm@ti.com> (raw)
In-Reply-To: <20171216204040.18017-1-nm@ti.com>
Provide a soc0 node and reference the same to simplify dts. This also
resolves the following warnings when built with W=1:
arch/arm/boot/dts/keystone-k2hk-evm.dtb: Warning (unit_address_vs_reg): Node /soc has a reg or ranges property, but no unit name
arch/arm/boot/dts/keystone-k2l-evm.dtb: Warning (unit_address_vs_reg): Node /soc has a reg or ranges property, but no unit name
arch/arm/boot/dts/keystone-k2e-evm.dtb: Warning (unit_address_vs_reg): Node /soc has a reg or ranges property, but no unit name
arch/arm/boot/dts/keystone-k2g-evm.dtb: Warning (unit_address_vs_reg): Node /soc has a reg or ranges property, but no unit name
arch/arm/boot/dts/keystone-k2g-ice.dtb: Warning (unit_address_vs_reg): Node /soc has a reg or ranges property, but no unit name
NOTE: Though we can reformat files by reducing 1 level of indent due to
the use of soc0 phandle, we omit that change to prevent un-necessary
churn in code base.
Reported-by: Rob Herring <robh@kernel.org>
Signed-off-by: Nishanth Menon <nm@ti.com>
---
Changes since V1: typo fixes in commit message.
v1: https://patchwork.kernel.org/patch/10115101/
arch/arm/boot/dts/keystone-k2e-evm.dts | 4 +--
arch/arm/boot/dts/keystone-k2e.dtsi | 4 +--
arch/arm/boot/dts/keystone-k2g.dtsi | 2 +-
arch/arm/boot/dts/keystone-k2hk-evm.dts | 50 ++++++++++++++++-----------------
arch/arm/boot/dts/keystone-k2hk.dtsi | 4 +--
arch/arm/boot/dts/keystone-k2l-evm.dts | 4 +--
arch/arm/boot/dts/keystone-k2l.dtsi | 4 +--
arch/arm/boot/dts/keystone.dtsi | 2 +-
8 files changed, 37 insertions(+), 37 deletions(-)
diff --git a/arch/arm/boot/dts/keystone-k2e-evm.dts b/arch/arm/boot/dts/keystone-k2e-evm.dts
index 5378b858fb6f..66fec5f5d081 100644
--- a/arch/arm/boot/dts/keystone-k2e-evm.dts
+++ b/arch/arm/boot/dts/keystone-k2e-evm.dts
@@ -25,8 +25,9 @@
status = "okay";
};
};
+};
- soc {
+&soc0 {
clocks {
refclksys: refclksys {
@@ -50,7 +51,6 @@
clock-output-names = "refclk-ddr3a";
};
};
- };
};
&usb_phy {
diff --git a/arch/arm/boot/dts/keystone-k2e.dtsi b/arch/arm/boot/dts/keystone-k2e.dtsi
index db4560b929f1..0bcd3f8a9c45 100644
--- a/arch/arm/boot/dts/keystone-k2e.dtsi
+++ b/arch/arm/boot/dts/keystone-k2e.dtsi
@@ -45,8 +45,9 @@
aliases {
rproc0 = &dsp0;
};
+};
- soc {
+&soc0 {
/include/ "keystone-k2e-clocks.dtsi"
usb: usb@2680000 {
@@ -191,5 +192,4 @@
bus_freq = <2500000>;
};
/include/ "keystone-k2e-netcp.dtsi"
- };
};
diff --git a/arch/arm/boot/dts/keystone-k2g.dtsi b/arch/arm/boot/dts/keystone-k2g.dtsi
index 8b04652b703f..fd061718dc0a 100644
--- a/arch/arm/boot/dts/keystone-k2g.dtsi
+++ b/arch/arm/boot/dts/keystone-k2g.dtsi
@@ -69,7 +69,7 @@
interrupts = <GIC_SPI 4 IRQ_TYPE_EDGE_RISING>;
};
- soc {
+ soc0: soc@0 {
#address-cells = <1>;
#size-cells = <1>;
#pinctrl-cells = <1>;
diff --git a/arch/arm/boot/dts/keystone-k2hk-evm.dts b/arch/arm/boot/dts/keystone-k2hk-evm.dts
index 8ea5a584e828..ad4e22afe133 100644
--- a/arch/arm/boot/dts/keystone-k2hk-evm.dts
+++ b/arch/arm/boot/dts/keystone-k2hk-evm.dts
@@ -26,7 +26,31 @@
};
};
- soc {
+ leds {
+ compatible = "gpio-leds";
+ debug1_1 {
+ label = "keystone:green:debug1";
+ gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>; /* 12 */
+ };
+
+ debug1_2 {
+ label = "keystone:red:debug1";
+ gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>; /* 13 */
+ };
+
+ debug2 {
+ label = "keystone:blue:debug2";
+ gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>; /* 14 */
+ };
+
+ debug3 {
+ label = "keystone:blue:debug3";
+ gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>; /* 15 */
+ };
+ };
+};
+
+&soc0 {
clocks {
refclksys: refclksys {
#clock-cells = <0>;
@@ -63,30 +87,6 @@
clock-output-names = "refclk-ddr3b";
};
};
- };
-
- leds {
- compatible = "gpio-leds";
- debug1_1 {
- label = "keystone:green:debug1";
- gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>; /* 12 */
- };
-
- debug1_2 {
- label = "keystone:red:debug1";
- gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>; /* 13 */
- };
-
- debug2 {
- label = "keystone:blue:debug2";
- gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>; /* 14 */
- };
-
- debug3 {
- label = "keystone:blue:debug3";
- gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>; /* 15 */
- };
- };
};
&usb_phy {
diff --git a/arch/arm/boot/dts/keystone-k2hk.dtsi b/arch/arm/boot/dts/keystone-k2hk.dtsi
index 71c1dcf4159f..ed59474522cb 100644
--- a/arch/arm/boot/dts/keystone-k2hk.dtsi
+++ b/arch/arm/boot/dts/keystone-k2hk.dtsi
@@ -52,8 +52,9 @@
rproc6 = &dsp6;
rproc7 = &dsp7;
};
+};
- soc {
+&soc0 {
/include/ "keystone-k2hk-clocks.dtsi"
msm_ram: msmram@c000000 {
@@ -281,5 +282,4 @@
bus_freq = <2500000>;
};
/include/ "keystone-k2hk-netcp.dtsi"
- };
};
diff --git a/arch/arm/boot/dts/keystone-k2l-evm.dts b/arch/arm/boot/dts/keystone-k2l-evm.dts
index 61f63437b886..e200533d26a4 100644
--- a/arch/arm/boot/dts/keystone-k2l-evm.dts
+++ b/arch/arm/boot/dts/keystone-k2l-evm.dts
@@ -25,8 +25,9 @@
status = "okay";
};
};
+};
- soc {
+&soc0 {
clocks {
refclksys: refclksys {
#clock-cells = <0>;
@@ -35,7 +36,6 @@
clock-output-names = "refclk-sys";
};
};
- };
};
&usb_phy {
diff --git a/arch/arm/boot/dts/keystone-k2l.dtsi b/arch/arm/boot/dts/keystone-k2l.dtsi
index 85b5481213d0..b61a830f4a4d 100644
--- a/arch/arm/boot/dts/keystone-k2l.dtsi
+++ b/arch/arm/boot/dts/keystone-k2l.dtsi
@@ -36,8 +36,9 @@
rproc2 = &dsp2;
rproc3 = &dsp3;
};
+};
- soc {
+&soc0 {
/include/ "keystone-k2l-clocks.dtsi"
uart2: serial@2348400 {
@@ -391,7 +392,6 @@
bus_freq = <2500000>;
};
/include/ "keystone-k2l-netcp.dtsi"
- };
};
&spi0 {
diff --git a/arch/arm/boot/dts/keystone.dtsi b/arch/arm/boot/dts/keystone.dtsi
index ca2cc5d8e3b5..0e8d094515cc 100644
--- a/arch/arm/boot/dts/keystone.dtsi
+++ b/arch/arm/boot/dts/keystone.dtsi
@@ -67,7 +67,7 @@
cpu_on = <0x84000003>;
};
- soc {
+ soc0: soc@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "ti,keystone","simple-bus";
--
2.14.1
WARNING: multiple messages have this Message-ID (diff)
From: Nishanth Menon <nm@ti.com>
To: Russell King <linux@armlinux.org.uk>,
Mark Rutland <mark.rutland@arm.com>,
Rob Herring <robh+dt@kernel.org>,
Santosh Shilimkar <ssantosh@kernel.org>
Cc: linux-kernel@vger.kernel.org, devicetree@vger.kernel.org,
linux-arm-kernel@lists.infradead.org, afd@ti.com,
Nishanth Menon <nm@ti.com>
Subject: [PATCH V2 2/8] ARM: dts: keystone*: Use a single soc0 instance
Date: Sat, 16 Dec 2017 14:40:34 -0600 [thread overview]
Message-ID: <20171216204040.18017-3-nm@ti.com> (raw)
In-Reply-To: <20171216204040.18017-1-nm@ti.com>
Provide a soc0 node and reference the same to simplify dts. This also
resolves the following warnings when built with W=1:
arch/arm/boot/dts/keystone-k2hk-evm.dtb: Warning (unit_address_vs_reg): Node /soc has a reg or ranges property, but no unit name
arch/arm/boot/dts/keystone-k2l-evm.dtb: Warning (unit_address_vs_reg): Node /soc has a reg or ranges property, but no unit name
arch/arm/boot/dts/keystone-k2e-evm.dtb: Warning (unit_address_vs_reg): Node /soc has a reg or ranges property, but no unit name
arch/arm/boot/dts/keystone-k2g-evm.dtb: Warning (unit_address_vs_reg): Node /soc has a reg or ranges property, but no unit name
arch/arm/boot/dts/keystone-k2g-ice.dtb: Warning (unit_address_vs_reg): Node /soc has a reg or ranges property, but no unit name
NOTE: Though we can reformat files by reducing 1 level of indent due to
the use of soc0 phandle, we omit that change to prevent un-necessary
churn in code base.
Reported-by: Rob Herring <robh@kernel.org>
Signed-off-by: Nishanth Menon <nm@ti.com>
---
Changes since V1: typo fixes in commit message.
v1: https://patchwork.kernel.org/patch/10115101/
arch/arm/boot/dts/keystone-k2e-evm.dts | 4 +--
arch/arm/boot/dts/keystone-k2e.dtsi | 4 +--
arch/arm/boot/dts/keystone-k2g.dtsi | 2 +-
arch/arm/boot/dts/keystone-k2hk-evm.dts | 50 ++++++++++++++++-----------------
arch/arm/boot/dts/keystone-k2hk.dtsi | 4 +--
arch/arm/boot/dts/keystone-k2l-evm.dts | 4 +--
arch/arm/boot/dts/keystone-k2l.dtsi | 4 +--
arch/arm/boot/dts/keystone.dtsi | 2 +-
8 files changed, 37 insertions(+), 37 deletions(-)
diff --git a/arch/arm/boot/dts/keystone-k2e-evm.dts b/arch/arm/boot/dts/keystone-k2e-evm.dts
index 5378b858fb6f..66fec5f5d081 100644
--- a/arch/arm/boot/dts/keystone-k2e-evm.dts
+++ b/arch/arm/boot/dts/keystone-k2e-evm.dts
@@ -25,8 +25,9 @@
status = "okay";
};
};
+};
- soc {
+&soc0 {
clocks {
refclksys: refclksys {
@@ -50,7 +51,6 @@
clock-output-names = "refclk-ddr3a";
};
};
- };
};
&usb_phy {
diff --git a/arch/arm/boot/dts/keystone-k2e.dtsi b/arch/arm/boot/dts/keystone-k2e.dtsi
index db4560b929f1..0bcd3f8a9c45 100644
--- a/arch/arm/boot/dts/keystone-k2e.dtsi
+++ b/arch/arm/boot/dts/keystone-k2e.dtsi
@@ -45,8 +45,9 @@
aliases {
rproc0 = &dsp0;
};
+};
- soc {
+&soc0 {
/include/ "keystone-k2e-clocks.dtsi"
usb: usb@2680000 {
@@ -191,5 +192,4 @@
bus_freq = <2500000>;
};
/include/ "keystone-k2e-netcp.dtsi"
- };
};
diff --git a/arch/arm/boot/dts/keystone-k2g.dtsi b/arch/arm/boot/dts/keystone-k2g.dtsi
index 8b04652b703f..fd061718dc0a 100644
--- a/arch/arm/boot/dts/keystone-k2g.dtsi
+++ b/arch/arm/boot/dts/keystone-k2g.dtsi
@@ -69,7 +69,7 @@
interrupts = <GIC_SPI 4 IRQ_TYPE_EDGE_RISING>;
};
- soc {
+ soc0: soc@0 {
#address-cells = <1>;
#size-cells = <1>;
#pinctrl-cells = <1>;
diff --git a/arch/arm/boot/dts/keystone-k2hk-evm.dts b/arch/arm/boot/dts/keystone-k2hk-evm.dts
index 8ea5a584e828..ad4e22afe133 100644
--- a/arch/arm/boot/dts/keystone-k2hk-evm.dts
+++ b/arch/arm/boot/dts/keystone-k2hk-evm.dts
@@ -26,7 +26,31 @@
};
};
- soc {
+ leds {
+ compatible = "gpio-leds";
+ debug1_1 {
+ label = "keystone:green:debug1";
+ gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>; /* 12 */
+ };
+
+ debug1_2 {
+ label = "keystone:red:debug1";
+ gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>; /* 13 */
+ };
+
+ debug2 {
+ label = "keystone:blue:debug2";
+ gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>; /* 14 */
+ };
+
+ debug3 {
+ label = "keystone:blue:debug3";
+ gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>; /* 15 */
+ };
+ };
+};
+
+&soc0 {
clocks {
refclksys: refclksys {
#clock-cells = <0>;
@@ -63,30 +87,6 @@
clock-output-names = "refclk-ddr3b";
};
};
- };
-
- leds {
- compatible = "gpio-leds";
- debug1_1 {
- label = "keystone:green:debug1";
- gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>; /* 12 */
- };
-
- debug1_2 {
- label = "keystone:red:debug1";
- gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>; /* 13 */
- };
-
- debug2 {
- label = "keystone:blue:debug2";
- gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>; /* 14 */
- };
-
- debug3 {
- label = "keystone:blue:debug3";
- gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>; /* 15 */
- };
- };
};
&usb_phy {
diff --git a/arch/arm/boot/dts/keystone-k2hk.dtsi b/arch/arm/boot/dts/keystone-k2hk.dtsi
index 71c1dcf4159f..ed59474522cb 100644
--- a/arch/arm/boot/dts/keystone-k2hk.dtsi
+++ b/arch/arm/boot/dts/keystone-k2hk.dtsi
@@ -52,8 +52,9 @@
rproc6 = &dsp6;
rproc7 = &dsp7;
};
+};
- soc {
+&soc0 {
/include/ "keystone-k2hk-clocks.dtsi"
msm_ram: msmram@c000000 {
@@ -281,5 +282,4 @@
bus_freq = <2500000>;
};
/include/ "keystone-k2hk-netcp.dtsi"
- };
};
diff --git a/arch/arm/boot/dts/keystone-k2l-evm.dts b/arch/arm/boot/dts/keystone-k2l-evm.dts
index 61f63437b886..e200533d26a4 100644
--- a/arch/arm/boot/dts/keystone-k2l-evm.dts
+++ b/arch/arm/boot/dts/keystone-k2l-evm.dts
@@ -25,8 +25,9 @@
status = "okay";
};
};
+};
- soc {
+&soc0 {
clocks {
refclksys: refclksys {
#clock-cells = <0>;
@@ -35,7 +36,6 @@
clock-output-names = "refclk-sys";
};
};
- };
};
&usb_phy {
diff --git a/arch/arm/boot/dts/keystone-k2l.dtsi b/arch/arm/boot/dts/keystone-k2l.dtsi
index 85b5481213d0..b61a830f4a4d 100644
--- a/arch/arm/boot/dts/keystone-k2l.dtsi
+++ b/arch/arm/boot/dts/keystone-k2l.dtsi
@@ -36,8 +36,9 @@
rproc2 = &dsp2;
rproc3 = &dsp3;
};
+};
- soc {
+&soc0 {
/include/ "keystone-k2l-clocks.dtsi"
uart2: serial@2348400 {
@@ -391,7 +392,6 @@
bus_freq = <2500000>;
};
/include/ "keystone-k2l-netcp.dtsi"
- };
};
&spi0 {
diff --git a/arch/arm/boot/dts/keystone.dtsi b/arch/arm/boot/dts/keystone.dtsi
index ca2cc5d8e3b5..0e8d094515cc 100644
--- a/arch/arm/boot/dts/keystone.dtsi
+++ b/arch/arm/boot/dts/keystone.dtsi
@@ -67,7 +67,7 @@
cpu_on = <0x84000003>;
};
- soc {
+ soc0: soc@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "ti,keystone","simple-bus";
--
2.14.1
WARNING: multiple messages have this Message-ID (diff)
From: nm@ti.com (Nishanth Menon)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH V2 2/8] ARM: dts: keystone*: Use a single soc0 instance
Date: Sat, 16 Dec 2017 14:40:34 -0600 [thread overview]
Message-ID: <20171216204040.18017-3-nm@ti.com> (raw)
In-Reply-To: <20171216204040.18017-1-nm@ti.com>
Provide a soc0 node and reference the same to simplify dts. This also
resolves the following warnings when built with W=1:
arch/arm/boot/dts/keystone-k2hk-evm.dtb: Warning (unit_address_vs_reg): Node /soc has a reg or ranges property, but no unit name
arch/arm/boot/dts/keystone-k2l-evm.dtb: Warning (unit_address_vs_reg): Node /soc has a reg or ranges property, but no unit name
arch/arm/boot/dts/keystone-k2e-evm.dtb: Warning (unit_address_vs_reg): Node /soc has a reg or ranges property, but no unit name
arch/arm/boot/dts/keystone-k2g-evm.dtb: Warning (unit_address_vs_reg): Node /soc has a reg or ranges property, but no unit name
arch/arm/boot/dts/keystone-k2g-ice.dtb: Warning (unit_address_vs_reg): Node /soc has a reg or ranges property, but no unit name
NOTE: Though we can reformat files by reducing 1 level of indent due to
the use of soc0 phandle, we omit that change to prevent un-necessary
churn in code base.
Reported-by: Rob Herring <robh@kernel.org>
Signed-off-by: Nishanth Menon <nm@ti.com>
---
Changes since V1: typo fixes in commit message.
v1: https://patchwork.kernel.org/patch/10115101/
arch/arm/boot/dts/keystone-k2e-evm.dts | 4 +--
arch/arm/boot/dts/keystone-k2e.dtsi | 4 +--
arch/arm/boot/dts/keystone-k2g.dtsi | 2 +-
arch/arm/boot/dts/keystone-k2hk-evm.dts | 50 ++++++++++++++++-----------------
arch/arm/boot/dts/keystone-k2hk.dtsi | 4 +--
arch/arm/boot/dts/keystone-k2l-evm.dts | 4 +--
arch/arm/boot/dts/keystone-k2l.dtsi | 4 +--
arch/arm/boot/dts/keystone.dtsi | 2 +-
8 files changed, 37 insertions(+), 37 deletions(-)
diff --git a/arch/arm/boot/dts/keystone-k2e-evm.dts b/arch/arm/boot/dts/keystone-k2e-evm.dts
index 5378b858fb6f..66fec5f5d081 100644
--- a/arch/arm/boot/dts/keystone-k2e-evm.dts
+++ b/arch/arm/boot/dts/keystone-k2e-evm.dts
@@ -25,8 +25,9 @@
status = "okay";
};
};
+};
- soc {
+&soc0 {
clocks {
refclksys: refclksys {
@@ -50,7 +51,6 @@
clock-output-names = "refclk-ddr3a";
};
};
- };
};
&usb_phy {
diff --git a/arch/arm/boot/dts/keystone-k2e.dtsi b/arch/arm/boot/dts/keystone-k2e.dtsi
index db4560b929f1..0bcd3f8a9c45 100644
--- a/arch/arm/boot/dts/keystone-k2e.dtsi
+++ b/arch/arm/boot/dts/keystone-k2e.dtsi
@@ -45,8 +45,9 @@
aliases {
rproc0 = &dsp0;
};
+};
- soc {
+&soc0 {
/include/ "keystone-k2e-clocks.dtsi"
usb: usb at 2680000 {
@@ -191,5 +192,4 @@
bus_freq = <2500000>;
};
/include/ "keystone-k2e-netcp.dtsi"
- };
};
diff --git a/arch/arm/boot/dts/keystone-k2g.dtsi b/arch/arm/boot/dts/keystone-k2g.dtsi
index 8b04652b703f..fd061718dc0a 100644
--- a/arch/arm/boot/dts/keystone-k2g.dtsi
+++ b/arch/arm/boot/dts/keystone-k2g.dtsi
@@ -69,7 +69,7 @@
interrupts = <GIC_SPI 4 IRQ_TYPE_EDGE_RISING>;
};
- soc {
+ soc0: soc at 0 {
#address-cells = <1>;
#size-cells = <1>;
#pinctrl-cells = <1>;
diff --git a/arch/arm/boot/dts/keystone-k2hk-evm.dts b/arch/arm/boot/dts/keystone-k2hk-evm.dts
index 8ea5a584e828..ad4e22afe133 100644
--- a/arch/arm/boot/dts/keystone-k2hk-evm.dts
+++ b/arch/arm/boot/dts/keystone-k2hk-evm.dts
@@ -26,7 +26,31 @@
};
};
- soc {
+ leds {
+ compatible = "gpio-leds";
+ debug1_1 {
+ label = "keystone:green:debug1";
+ gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>; /* 12 */
+ };
+
+ debug1_2 {
+ label = "keystone:red:debug1";
+ gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>; /* 13 */
+ };
+
+ debug2 {
+ label = "keystone:blue:debug2";
+ gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>; /* 14 */
+ };
+
+ debug3 {
+ label = "keystone:blue:debug3";
+ gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>; /* 15 */
+ };
+ };
+};
+
+&soc0 {
clocks {
refclksys: refclksys {
#clock-cells = <0>;
@@ -63,30 +87,6 @@
clock-output-names = "refclk-ddr3b";
};
};
- };
-
- leds {
- compatible = "gpio-leds";
- debug1_1 {
- label = "keystone:green:debug1";
- gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>; /* 12 */
- };
-
- debug1_2 {
- label = "keystone:red:debug1";
- gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>; /* 13 */
- };
-
- debug2 {
- label = "keystone:blue:debug2";
- gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>; /* 14 */
- };
-
- debug3 {
- label = "keystone:blue:debug3";
- gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>; /* 15 */
- };
- };
};
&usb_phy {
diff --git a/arch/arm/boot/dts/keystone-k2hk.dtsi b/arch/arm/boot/dts/keystone-k2hk.dtsi
index 71c1dcf4159f..ed59474522cb 100644
--- a/arch/arm/boot/dts/keystone-k2hk.dtsi
+++ b/arch/arm/boot/dts/keystone-k2hk.dtsi
@@ -52,8 +52,9 @@
rproc6 = &dsp6;
rproc7 = &dsp7;
};
+};
- soc {
+&soc0 {
/include/ "keystone-k2hk-clocks.dtsi"
msm_ram: msmram at c000000 {
@@ -281,5 +282,4 @@
bus_freq = <2500000>;
};
/include/ "keystone-k2hk-netcp.dtsi"
- };
};
diff --git a/arch/arm/boot/dts/keystone-k2l-evm.dts b/arch/arm/boot/dts/keystone-k2l-evm.dts
index 61f63437b886..e200533d26a4 100644
--- a/arch/arm/boot/dts/keystone-k2l-evm.dts
+++ b/arch/arm/boot/dts/keystone-k2l-evm.dts
@@ -25,8 +25,9 @@
status = "okay";
};
};
+};
- soc {
+&soc0 {
clocks {
refclksys: refclksys {
#clock-cells = <0>;
@@ -35,7 +36,6 @@
clock-output-names = "refclk-sys";
};
};
- };
};
&usb_phy {
diff --git a/arch/arm/boot/dts/keystone-k2l.dtsi b/arch/arm/boot/dts/keystone-k2l.dtsi
index 85b5481213d0..b61a830f4a4d 100644
--- a/arch/arm/boot/dts/keystone-k2l.dtsi
+++ b/arch/arm/boot/dts/keystone-k2l.dtsi
@@ -36,8 +36,9 @@
rproc2 = &dsp2;
rproc3 = &dsp3;
};
+};
- soc {
+&soc0 {
/include/ "keystone-k2l-clocks.dtsi"
uart2: serial at 2348400 {
@@ -391,7 +392,6 @@
bus_freq = <2500000>;
};
/include/ "keystone-k2l-netcp.dtsi"
- };
};
&spi0 {
diff --git a/arch/arm/boot/dts/keystone.dtsi b/arch/arm/boot/dts/keystone.dtsi
index ca2cc5d8e3b5..0e8d094515cc 100644
--- a/arch/arm/boot/dts/keystone.dtsi
+++ b/arch/arm/boot/dts/keystone.dtsi
@@ -67,7 +67,7 @@
cpu_on = <0x84000003>;
};
- soc {
+ soc0: soc at 0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "ti,keystone","simple-bus";
--
2.14.1
next prev parent reply other threads:[~2017-12-16 20:41 UTC|newest]
Thread overview: 63+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-12-15 13:20 [PATCH 0/8] ARM: dts: keystone*: Stage 1 cleanup for W=1 Nishanth Menon
2017-12-15 13:20 ` Nishanth Menon
2017-12-15 13:20 ` Nishanth Menon
2017-12-15 13:20 ` [PATCH 1/8] ARM: dts: keystone*: Standardize license with SPDX tag Nishanth Menon
2017-12-15 13:20 ` Nishanth Menon
2017-12-15 13:20 ` Nishanth Menon
2017-12-15 13:20 ` [PATCH 2/8] ARM: dts: keystone*: Use a single soc0 instance Nishanth Menon
2017-12-15 13:20 ` Nishanth Menon
2017-12-15 13:20 ` Nishanth Menon
2017-12-15 13:38 ` Nishanth Menon
2017-12-15 13:38 ` Nishanth Menon
2017-12-15 13:38 ` Nishanth Menon
2017-12-16 8:33 ` santosh.shilimkar
2017-12-16 8:33 ` santosh.shilimkar at oracle.com
2017-12-16 8:33 ` santosh.shilimkar-QHcLZuEGTsvQT0dZR+AlfA
2017-12-15 13:20 ` [PATCH 3/8] ARM: dts: keystone: Get rid of usage of skeleton.dtsi Nishanth Menon
2017-12-15 13:20 ` Nishanth Menon
2017-12-15 13:20 ` Nishanth Menon
2017-12-15 13:20 ` [PATCH 4/8] ARM: dts: keystone: Add missing unit name to interrupt controller Nishanth Menon
2017-12-15 13:20 ` Nishanth Menon
2017-12-15 13:20 ` Nishanth Menon
2017-12-15 13:20 ` [PATCH 5/8] ARM: dts: keystone-clocks: Add missing unit name to clock nodes that have regs Nishanth Menon
2017-12-15 13:20 ` Nishanth Menon
2017-12-15 13:20 ` Nishanth Menon
2017-12-15 13:21 ` [PATCH 6/8] ARM: dts: keystone-hk-clocks: " Nishanth Menon
2017-12-15 13:21 ` Nishanth Menon
2017-12-15 13:21 ` Nishanth Menon
2017-12-15 13:21 ` [PATCH 7/8] ARM: dts: keystone-k2e-clocks: " Nishanth Menon
2017-12-15 13:21 ` Nishanth Menon
2017-12-15 13:21 ` Nishanth Menon
2017-12-15 13:21 ` [PATCH 8/8] ARM: dts: keystone-k2l-clocks: " Nishanth Menon
2017-12-15 13:21 ` Nishanth Menon
2017-12-15 13:21 ` Nishanth Menon
2017-12-16 20:40 ` [PATCH V2 0/8] ARM: dts: keystone*: Stage 1 cleanup for W=1 Nishanth Menon
2017-12-16 20:40 ` Nishanth Menon
2017-12-16 20:40 ` Nishanth Menon
2017-12-16 20:40 ` [PATCH V2 1/8] ARM: dts: keystone*: Standardize license with SPDX tag Nishanth Menon
2017-12-16 20:40 ` Nishanth Menon
2017-12-16 20:40 ` Nishanth Menon
2017-12-16 20:40 ` Nishanth Menon [this message]
2017-12-16 20:40 ` [PATCH V2 2/8] ARM: dts: keystone*: Use a single soc0 instance Nishanth Menon
2017-12-16 20:40 ` Nishanth Menon
2017-12-16 20:40 ` [PATCH V2 3/8] ARM: dts: keystone: Get rid of usage of skeleton.dtsi Nishanth Menon
2017-12-16 20:40 ` Nishanth Menon
2017-12-16 20:40 ` Nishanth Menon
2017-12-16 20:40 ` [PATCH V2 4/8] ARM: dts: keystone: Add missing unit name to interrupt controller Nishanth Menon
2017-12-16 20:40 ` Nishanth Menon
2017-12-16 20:40 ` Nishanth Menon
2017-12-16 20:40 ` [PATCH V2 5/8] ARM: dts: keystone-clocks: Add missing unit name to clock nodes that have regs Nishanth Menon
2017-12-16 20:40 ` Nishanth Menon
2017-12-16 20:40 ` Nishanth Menon
2017-12-16 20:40 ` [PATCH V2 6/8] ARM: dts: keystone-hk-clocks: " Nishanth Menon
2017-12-16 20:40 ` Nishanth Menon
2017-12-16 20:40 ` Nishanth Menon
2017-12-16 20:40 ` [PATCH V2 7/8] ARM: dts: keystone-k2e-clocks: " Nishanth Menon
2017-12-16 20:40 ` Nishanth Menon
2017-12-16 20:40 ` Nishanth Menon
2017-12-16 20:40 ` [PATCH V2 8/8] ARM: dts: keystone-k2l-clocks: " Nishanth Menon
2017-12-16 20:40 ` Nishanth Menon
2017-12-16 20:40 ` Nishanth Menon
2017-12-16 22:39 ` [PATCH V2 0/8] ARM: dts: keystone*: Stage 1 cleanup for W=1 santosh.shilimkar
2017-12-16 22:39 ` santosh.shilimkar at oracle.com
2017-12-16 22:39 ` santosh.shilimkar-QHcLZuEGTsvQT0dZR+AlfA
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20171216204040.18017-3-nm@ti.com \
--to=nm@ti.com \
--cc=afd@ti.com \
--cc=devicetree@vger.kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@armlinux.org.uk \
--cc=mark.rutland@arm.com \
--cc=robh+dt@kernel.org \
--cc=ssantosh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.