All of lore.kernel.org
 help / color / mirror / Atom feed
From: Tomas Winkler <tomas.winkler@intel.com>
To: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>,
	Jason Gunthorpe <jgg@ziepe.ca>
Cc: Alexander Usyskin <alexander.usyskin@intel.com>,
	linux-integrity@vger.kernel.org,
	linux-security-module@vger.kernel.org,
	linux-kernel@vger.kernel.org,
	Tomas Winkler <tomas.winkler@intel.com>
Subject: [PATCH v2 5/8] tpm: factor out tpm1 pm suspend flow into tpm1-cmd.c
Date: Sat, 10 Mar 2018 10:24:25 +0200	[thread overview]
Message-ID: <20180310082428.31519-6-tomas.winkler@intel.com> (raw)
In-Reply-To: <20180310082428.31519-1-tomas.winkler@intel.com>

Factor out tpm1 suspend flow from tpm-interface.c into a new function
tpm1_pm_suspend in tpm1-cmd.c

Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
---
 drivers/char/tpm/tpm-interface.c | 55 ++++------------------------------------
 drivers/char/tpm/tpm.h           |  1 +
 drivers/char/tpm/tpm1-cmd.c      | 54 +++++++++++++++++++++++++++++++++++++++
 3 files changed, 60 insertions(+), 50 deletions(-)

diff --git a/drivers/char/tpm/tpm-interface.c b/drivers/char/tpm/tpm-interface.c
index a7dfe286b343..11899ef32457 100644
--- a/drivers/char/tpm/tpm-interface.c
+++ b/drivers/char/tpm/tpm-interface.c
@@ -485,15 +485,6 @@ int tpm_send(struct tpm_chip *chip, void *cmd, size_t buflen)
 }
 EXPORT_SYMBOL_GPL(tpm_send);
 
-#define TPM_ORD_SAVESTATE 152
-#define SAVESTATE_RESULT_SIZE 10
-
-static const struct tpm_input_header savestate_header = {
-	.tag = cpu_to_be16(TPM_TAG_RQU_COMMAND),
-	.length = cpu_to_be32(10),
-	.ordinal = cpu_to_be32(TPM_ORD_SAVESTATE)
-};
-
 /*
  * We are about to suspend. Save the TPM state
  * so that it can be restored.
@@ -501,54 +492,18 @@ static const struct tpm_input_header savestate_header = {
 int tpm_pm_suspend(struct device *dev)
 {
 	struct tpm_chip *chip = dev_get_drvdata(dev);
-	struct tpm_cmd_t cmd;
-	int rc, try;
+	int rc = 0;
 
-	u8 dummy_hash[TPM_DIGEST_SIZE] = { 0 };
-
-	if (chip == NULL)
+	if (!chip)
 		return -ENODEV;
 
 	if (chip->flags & TPM_CHIP_FLAG_ALWAYS_POWERED)
 		return 0;
 
-	if (chip->flags & TPM_CHIP_FLAG_TPM2) {
+	if (chip->flags & TPM_CHIP_FLAG_TPM2)
 		tpm2_shutdown(chip, TPM2_SU_STATE);
-		return 0;
-	}
-
-	/* for buggy tpm, flush pcrs with extend to selected dummy */
-	if (tpm_suspend_pcr)
-		rc = tpm1_pcr_extend(chip, tpm_suspend_pcr, dummy_hash,
-				     "extending dummy pcr before suspend");
-
-	/* now do the actual savestate */
-	for (try = 0; try < TPM_RETRY; try++) {
-		cmd.header.in = savestate_header;
-		rc = tpm_transmit_cmd(chip, NULL, &cmd, SAVESTATE_RESULT_SIZE,
-				      0, 0, NULL);
-
-		/*
-		 * If the TPM indicates that it is too busy to respond to
-		 * this command then retry before giving up.  It can take
-		 * several seconds for this TPM to be ready.
-		 *
-		 * This can happen if the TPM has already been sent the
-		 * SaveState command before the driver has loaded.  TCG 1.2
-		 * specification states that any communication after SaveState
-		 * may cause the TPM to invalidate previously saved state.
-		 */
-		if (rc != TPM_WARN_RETRY)
-			break;
-		tpm_msleep(TPM_TIMEOUT_RETRY);
-	}
-
-	if (rc)
-		dev_err(&chip->dev,
-			"Error (%d) sending savestate before suspend\n", rc);
-	else if (try > 0)
-		dev_warn(&chip->dev, "TPM savestate took %dms\n",
-			 try * TPM_TIMEOUT_RETRY);
+	else
+		rc = tpm1_pm_suspend(chip, tpm_suspend_pcr);
 
 	return rc;
 }
diff --git a/drivers/char/tpm/tpm.h b/drivers/char/tpm/tpm.h
index 6922fdfc4274..1bed9b5441c5 100644
--- a/drivers/char/tpm/tpm.h
+++ b/drivers/char/tpm/tpm.h
@@ -529,6 +529,7 @@ ssize_t tpm_transmit_cmd(struct tpm_chip *chip, struct tpm_space *space,
 int tpm_startup(struct tpm_chip *chip);
 int tpm_get_timeouts(struct tpm_chip *);
 
+int tpm1_pm_suspend(struct tpm_chip *chip, int tpm_suspend_pcr);
 int tpm1_do_selftest(struct tpm_chip *chip);
 int tpm1_auto_startup(struct tpm_chip *chip);
 int tpm1_get_timeouts(struct tpm_chip *chip);
diff --git a/drivers/char/tpm/tpm1-cmd.c b/drivers/char/tpm/tpm1-cmd.c
index 6dde18c46820..e2c9f609fe64 100644
--- a/drivers/char/tpm/tpm1-cmd.c
+++ b/drivers/char/tpm/tpm1-cmd.c
@@ -665,3 +665,57 @@ int tpm1_auto_startup(struct tpm_chip *chip)
 		rc = -ENODEV;
 	return rc;
 }
+
+#define TPM_ORD_SAVESTATE 152
+#define SAVESTATE_RESULT_SIZE 10
+static const struct tpm_input_header savestate_header = {
+	.tag = cpu_to_be16(TPM_TAG_RQU_COMMAND),
+	.length = cpu_to_be32(10),
+	.ordinal = cpu_to_be32(TPM_ORD_SAVESTATE)
+};
+
+/*
+ * We are about to suspend. Save the TPM state
+ * so that it can be restored.
+ */
+int tpm1_pm_suspend(struct tpm_chip *chip, int tpm_suspend_pcr)
+{
+	u8 dummy_hash[TPM_DIGEST_SIZE] = { 0 };
+	struct tpm_cmd_t cmd;
+	int rc, try;
+
+	/* for buggy tpm, flush pcrs with extend to selected dummy */
+	if (tpm_suspend_pcr)
+		rc = tpm1_pcr_extend(chip, tpm_suspend_pcr, dummy_hash,
+				     "extending dummy pcr before suspend");
+
+	/* now do the actual savestate */
+	for (try = 0; try < TPM_RETRY; try++) {
+		cmd.header.in = savestate_header;
+		rc = tpm_transmit_cmd(chip, NULL, &cmd, SAVESTATE_RESULT_SIZE,
+				      0, 0, NULL);
+
+		/*
+		 * If the TPM indicates that it is too busy to respond to
+		 * this command then retry before giving up.  It can take
+		 * several seconds for this TPM to be ready.
+		 *
+		 * This can happen if the TPM has already been sent the
+		 * SaveState command before the driver has loaded.  TCG 1.2
+		 * specification states that any communication after SaveState
+		 * may cause the TPM to invalidate previously saved state.
+		 */
+		if (rc != TPM_WARN_RETRY)
+			break;
+		tpm_msleep(TPM_TIMEOUT_RETRY);
+	}
+
+	if (rc)
+		dev_err(&chip->dev,
+			"Error (%d) sending savestate before suspend\n", rc);
+	else if (try > 0)
+		dev_warn(&chip->dev, "TPM savestate took %dms\n",
+			 try * TPM_TIMEOUT_RETRY);
+
+	return rc;
+}
-- 
2.14.3

WARNING: multiple messages have this Message-ID (diff)
From: tomas.winkler@intel.com (Tomas Winkler)
To: linux-security-module@vger.kernel.org
Subject: [PATCH v2 5/8] tpm: factor out tpm1 pm suspend flow into tpm1-cmd.c
Date: Sat, 10 Mar 2018 10:24:25 +0200	[thread overview]
Message-ID: <20180310082428.31519-6-tomas.winkler@intel.com> (raw)
In-Reply-To: <20180310082428.31519-1-tomas.winkler@intel.com>

Factor out tpm1 suspend flow from tpm-interface.c into a new function
tpm1_pm_suspend in tpm1-cmd.c

Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
---
 drivers/char/tpm/tpm-interface.c | 55 ++++------------------------------------
 drivers/char/tpm/tpm.h           |  1 +
 drivers/char/tpm/tpm1-cmd.c      | 54 +++++++++++++++++++++++++++++++++++++++
 3 files changed, 60 insertions(+), 50 deletions(-)

diff --git a/drivers/char/tpm/tpm-interface.c b/drivers/char/tpm/tpm-interface.c
index a7dfe286b343..11899ef32457 100644
--- a/drivers/char/tpm/tpm-interface.c
+++ b/drivers/char/tpm/tpm-interface.c
@@ -485,15 +485,6 @@ int tpm_send(struct tpm_chip *chip, void *cmd, size_t buflen)
 }
 EXPORT_SYMBOL_GPL(tpm_send);
 
-#define TPM_ORD_SAVESTATE 152
-#define SAVESTATE_RESULT_SIZE 10
-
-static const struct tpm_input_header savestate_header = {
-	.tag = cpu_to_be16(TPM_TAG_RQU_COMMAND),
-	.length = cpu_to_be32(10),
-	.ordinal = cpu_to_be32(TPM_ORD_SAVESTATE)
-};
-
 /*
  * We are about to suspend. Save the TPM state
  * so that it can be restored.
@@ -501,54 +492,18 @@ static const struct tpm_input_header savestate_header = {
 int tpm_pm_suspend(struct device *dev)
 {
 	struct tpm_chip *chip = dev_get_drvdata(dev);
-	struct tpm_cmd_t cmd;
-	int rc, try;
+	int rc = 0;
 
-	u8 dummy_hash[TPM_DIGEST_SIZE] = { 0 };
-
-	if (chip == NULL)
+	if (!chip)
 		return -ENODEV;
 
 	if (chip->flags & TPM_CHIP_FLAG_ALWAYS_POWERED)
 		return 0;
 
-	if (chip->flags & TPM_CHIP_FLAG_TPM2) {
+	if (chip->flags & TPM_CHIP_FLAG_TPM2)
 		tpm2_shutdown(chip, TPM2_SU_STATE);
-		return 0;
-	}
-
-	/* for buggy tpm, flush pcrs with extend to selected dummy */
-	if (tpm_suspend_pcr)
-		rc = tpm1_pcr_extend(chip, tpm_suspend_pcr, dummy_hash,
-				     "extending dummy pcr before suspend");
-
-	/* now do the actual savestate */
-	for (try = 0; try < TPM_RETRY; try++) {
-		cmd.header.in = savestate_header;
-		rc = tpm_transmit_cmd(chip, NULL, &cmd, SAVESTATE_RESULT_SIZE,
-				      0, 0, NULL);
-
-		/*
-		 * If the TPM indicates that it is too busy to respond to
-		 * this command then retry before giving up.  It can take
-		 * several seconds for this TPM to be ready.
-		 *
-		 * This can happen if the TPM has already been sent the
-		 * SaveState command before the driver has loaded.  TCG 1.2
-		 * specification states that any communication after SaveState
-		 * may cause the TPM to invalidate previously saved state.
-		 */
-		if (rc != TPM_WARN_RETRY)
-			break;
-		tpm_msleep(TPM_TIMEOUT_RETRY);
-	}
-
-	if (rc)
-		dev_err(&chip->dev,
-			"Error (%d) sending savestate before suspend\n", rc);
-	else if (try > 0)
-		dev_warn(&chip->dev, "TPM savestate took %dms\n",
-			 try * TPM_TIMEOUT_RETRY);
+	else
+		rc = tpm1_pm_suspend(chip, tpm_suspend_pcr);
 
 	return rc;
 }
diff --git a/drivers/char/tpm/tpm.h b/drivers/char/tpm/tpm.h
index 6922fdfc4274..1bed9b5441c5 100644
--- a/drivers/char/tpm/tpm.h
+++ b/drivers/char/tpm/tpm.h
@@ -529,6 +529,7 @@ ssize_t tpm_transmit_cmd(struct tpm_chip *chip, struct tpm_space *space,
 int tpm_startup(struct tpm_chip *chip);
 int tpm_get_timeouts(struct tpm_chip *);
 
+int tpm1_pm_suspend(struct tpm_chip *chip, int tpm_suspend_pcr);
 int tpm1_do_selftest(struct tpm_chip *chip);
 int tpm1_auto_startup(struct tpm_chip *chip);
 int tpm1_get_timeouts(struct tpm_chip *chip);
diff --git a/drivers/char/tpm/tpm1-cmd.c b/drivers/char/tpm/tpm1-cmd.c
index 6dde18c46820..e2c9f609fe64 100644
--- a/drivers/char/tpm/tpm1-cmd.c
+++ b/drivers/char/tpm/tpm1-cmd.c
@@ -665,3 +665,57 @@ int tpm1_auto_startup(struct tpm_chip *chip)
 		rc = -ENODEV;
 	return rc;
 }
+
+#define TPM_ORD_SAVESTATE 152
+#define SAVESTATE_RESULT_SIZE 10
+static const struct tpm_input_header savestate_header = {
+	.tag = cpu_to_be16(TPM_TAG_RQU_COMMAND),
+	.length = cpu_to_be32(10),
+	.ordinal = cpu_to_be32(TPM_ORD_SAVESTATE)
+};
+
+/*
+ * We are about to suspend. Save the TPM state
+ * so that it can be restored.
+ */
+int tpm1_pm_suspend(struct tpm_chip *chip, int tpm_suspend_pcr)
+{
+	u8 dummy_hash[TPM_DIGEST_SIZE] = { 0 };
+	struct tpm_cmd_t cmd;
+	int rc, try;
+
+	/* for buggy tpm, flush pcrs with extend to selected dummy */
+	if (tpm_suspend_pcr)
+		rc = tpm1_pcr_extend(chip, tpm_suspend_pcr, dummy_hash,
+				     "extending dummy pcr before suspend");
+
+	/* now do the actual savestate */
+	for (try = 0; try < TPM_RETRY; try++) {
+		cmd.header.in = savestate_header;
+		rc = tpm_transmit_cmd(chip, NULL, &cmd, SAVESTATE_RESULT_SIZE,
+				      0, 0, NULL);
+
+		/*
+		 * If the TPM indicates that it is too busy to respond to
+		 * this command then retry before giving up.  It can take
+		 * several seconds for this TPM to be ready.
+		 *
+		 * This can happen if the TPM has already been sent the
+		 * SaveState command before the driver has loaded.  TCG 1.2
+		 * specification states that any communication after SaveState
+		 * may cause the TPM to invalidate previously saved state.
+		 */
+		if (rc != TPM_WARN_RETRY)
+			break;
+		tpm_msleep(TPM_TIMEOUT_RETRY);
+	}
+
+	if (rc)
+		dev_err(&chip->dev,
+			"Error (%d) sending savestate before suspend\n", rc);
+	else if (try > 0)
+		dev_warn(&chip->dev, "TPM savestate took %dms\n",
+			 try * TPM_TIMEOUT_RETRY);
+
+	return rc;
+}
-- 
2.14.3

--
To unsubscribe from this list: send the line "unsubscribe linux-security-module" in
the body of a message to majordomo at vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

  parent reply	other threads:[~2018-03-10  8:28 UTC|newest]

Thread overview: 48+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-03-10  8:24 [PATCH v2 0/8] tpm: factor out tpm1 code into tpm1-cmd.c Tomas Winkler
2018-03-10  8:24 ` Tomas Winkler
2018-03-10  8:24 ` [PATCH v2 1/8] tpm: move tpm1_pcr_extend to tpm1-cmd.c Tomas Winkler
2018-03-10  8:24   ` Tomas Winkler
2018-03-15 16:27   ` Jarkko Sakkinen
2018-03-15 16:27     ` Jarkko Sakkinen
2018-03-10  8:24 ` [PATCH v2 2/8] tpm: move tpm_getcap " Tomas Winkler
2018-03-10  8:24   ` Tomas Winkler
2018-03-15 16:29   ` Jarkko Sakkinen
2018-03-15 16:29     ` Jarkko Sakkinen
2018-03-10  8:24 ` [PATCH v2 3/8] tpm: factor out tpm1_get_random into tpm1-cmd.c Tomas Winkler
2018-03-10  8:24   ` Tomas Winkler
2018-03-15 16:32   ` Jarkko Sakkinen
2018-03-15 16:32     ` Jarkko Sakkinen
2018-03-15 23:24     ` Winkler, Tomas
2018-03-15 23:24       ` Winkler, Tomas
2018-03-16 14:02       ` Jarkko Sakkinen
2018-03-16 14:02         ` Jarkko Sakkinen
2018-03-10  8:24 ` [PATCH v2 4/8] tpm: move tpm1 selftest code from tpm-interface tpm1-cmd.c Tomas Winkler
2018-03-10  8:24   ` Tomas Winkler
2018-03-15 16:37   ` Jarkko Sakkinen
2018-03-15 16:37     ` Jarkko Sakkinen
2018-03-10  8:24 ` Tomas Winkler [this message]
2018-03-10  8:24   ` [PATCH v2 5/8] tpm: factor out tpm1 pm suspend flow into tpm1-cmd.c Tomas Winkler
2018-03-15 16:40   ` Jarkko Sakkinen
2018-03-15 16:40     ` Jarkko Sakkinen
2018-03-10  8:24 ` [PATCH v2 6/8] tpm: factor out tpm_startup function Tomas Winkler
2018-03-10  8:24   ` Tomas Winkler
2018-03-15 16:41   ` Jarkko Sakkinen
2018-03-15 16:41     ` Jarkko Sakkinen
2018-03-10  8:24 ` [PATCH v2 7/8] tpm: Move pcr extend to tpm2-cmd.c Tomas Winkler
2018-03-10  8:24   ` Tomas Winkler
2018-03-15 16:47   ` Jarkko Sakkinen
2018-03-15 16:47     ` Jarkko Sakkinen
2018-03-15 23:28     ` Winkler, Tomas
2018-03-15 23:28       ` Winkler, Tomas
2018-03-16 14:08       ` Jarkko Sakkinen
2018-03-16 14:08         ` Jarkko Sakkinen
2018-03-10  8:24 ` [PATCH v2 8/8] tpm: move tpm2 code validation to tpm2-space.c Tomas Winkler
2018-03-10  8:24   ` Tomas Winkler
2018-03-15 16:49   ` Jarkko Sakkinen
2018-03-15 16:49     ` Jarkko Sakkinen
2018-03-15 16:35 ` [PATCH v2 0/8] tpm: factor out tpm1 code into tpm1-cmd.c Jarkko Sakkinen
2018-03-15 16:35   ` Jarkko Sakkinen
2018-03-15 23:25   ` Winkler, Tomas
2018-03-15 23:25     ` Winkler, Tomas
2018-03-16 14:03     ` Jarkko Sakkinen
2018-03-16 14:03       ` Jarkko Sakkinen

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180310082428.31519-6-tomas.winkler@intel.com \
    --to=tomas.winkler@intel.com \
    --cc=alexander.usyskin@intel.com \
    --cc=jarkko.sakkinen@linux.intel.com \
    --cc=jgg@ziepe.ca \
    --cc=linux-integrity@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-security-module@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.