[PATCH v2 26/36] mtd: nand: ecc: Create the software Hamming engine instance

From: Miquel Raynal <miquel.raynal@bootlin.com>
To: Boris Brezillon <bbrezillon@kernel.org>,
	Richard Weinberger <richard@nod.at>,
	David Woodhouse <dwmw2@infradead.org>,
	Brian Norris <computersforpeace@gmail.com>,
	Marek Vasut <marek.vasut@gmail.com>,
	Tudor Ambarus <Tudor.Ambarus@microchip.com>
Cc: Vignesh R <vigneshr@ti.com>,
	Tudor Ambarus <tudor.ambarus@microchip.com>,
	Julien Su <juliensu@mxic.com.tw>,
	Schrempf Frieder <frieder.schrempf@kontron.de>,
	Paul Cercueil <paul@crapouillou.net>,
	linux-mtd@lists.infradead.org,
	Thomas Petazzoni <thomas.petazzoni@bootlin.com>,
	Miquel Raynal <miquel.raynal@bootlin.com>,
	Mason Yang <masonccyang@mxic.com.tw>,
	linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 26/36] mtd: nand: ecc: Create the software Hamming engine instance
Date: Mon,  4 Mar 2019 23:28:31 +0100	[thread overview]
Message-ID: <20190304222841.13899-27-miquel.raynal@bootlin.com> (raw)
In-Reply-To: <20190304222841.13899-1-miquel.raynal@bootlin.com>

Let's continue introducing the generic ECC engine abstraction in the
NAND subsystem by instantiating a second ECC engine: the software
Hamming one.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
---
 drivers/mtd/nand/ecc/sw-hamming.c       | 208 ++++++++++++++++++++++++
 drivers/mtd/nand/raw/nand_base.c        |  25 +--
 include/linux/mtd/nand-ecc-sw-hamming.h |  15 ++
 3 files changed, 231 insertions(+), 17 deletions(-)

diff --git a/drivers/mtd/nand/ecc/sw-hamming.c b/drivers/mtd/nand/ecc/sw-hamming.c
index 816e5ea816c2..c58dfddc0ff3 100644
--- a/drivers/mtd/nand/ecc/sw-hamming.c
+++ b/drivers/mtd/nand/ecc/sw-hamming.c
@@ -17,6 +17,7 @@
 #include <linux/types.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
+#include <linux/mtd/nand.h>
 #include <linux/mtd/nand-ecc-sw-hamming.h>
 #include <asm/byteorder.h>
 
@@ -464,6 +465,213 @@ int nand_ecc_sw_hamming_correct(struct nand_device *nand, unsigned char *buf,
 }
 EXPORT_SYMBOL(nand_ecc_sw_hamming_correct);
 
+int nand_ecc_sw_hamming_init_ctx(struct nand_device *nand)
+{
+	struct nand_ecc_conf *conf = &nand->ecc.ctx.conf;
+	struct nand_ecc_sw_hamming_conf *engine_conf;
+	struct mtd_info *mtd = nanddev_to_mtd(nand);
+
+	if (!mtd->ooblayout) {
+		switch (mtd->oobsize) {
+		case 8:
+		case 16:
+			mtd_set_ooblayout(mtd, &nand_ooblayout_sp_ops);
+			break;
+		case 64:
+		case 128:
+			mtd_set_ooblayout(mtd, &nand_ooblayout_lp_hamming_ops);
+			break;
+		default:
+			return -ENOTSUPP;
+		}
+	}
+
+	conf->provider = NAND_ECC_SOFT;
+	conf->algo = NAND_ECC_HAMMING;
+	conf->step_size = nand->ecc.user_conf.step_size;
+	conf->strength = 1;
+
+	/* Use the strongest configuration by default */
+	if (conf->step_size != 256 && conf->step_size != 512)
+		conf->step_size = 256;
+
+	engine_conf = kzalloc(sizeof(*engine_conf), GFP_KERNEL);
+	if (!engine_conf)
+		return -ENOMEM;
+
+	engine_conf->code_size = 3;
+	engine_conf->nsteps = mtd->writesize / conf->step_size;
+	engine_conf->calc_buf = kzalloc(sizeof(mtd->oobsize), GFP_KERNEL);
+	engine_conf->code_buf = kzalloc(sizeof(mtd->oobsize), GFP_KERNEL);
+	if (!engine_conf->calc_buf || !engine_conf->code_buf) {
+		kfree(engine_conf);
+		return -ENOMEM;
+	}
+
+	nand->ecc.ctx.priv = engine_conf;
+	nand->ecc.ctx.total = engine_conf->nsteps * engine_conf->code_size;
+
+	return 0;
+}
+EXPORT_SYMBOL(nand_ecc_sw_hamming_init_ctx);
+
+void nand_ecc_sw_hamming_cleanup_ctx(struct nand_device *nand)
+{
+	struct nand_ecc_sw_hamming_conf *engine_conf = nand->ecc.ctx.priv;
+
+	if (engine_conf) {
+		kfree(engine_conf->calc_buf);
+		kfree(engine_conf->code_buf);
+	}
+
+	kfree(engine_conf);
+}
+EXPORT_SYMBOL(nand_ecc_sw_hamming_cleanup_ctx);
+
+static int nand_ecc_sw_hamming_prepare_io_req(struct nand_device *nand,
+					      struct nand_page_io_req *req,
+					      void *oobbuf)
+{
+	struct nand_ecc_sw_hamming_conf *engine_conf = nand->ecc.ctx.priv;
+	struct mtd_info *mtd = nanddev_to_mtd(nand);
+	int eccsize = nand->ecc.ctx.conf.step_size;
+	int eccbytes = engine_conf->code_size;
+	int eccsteps = engine_conf->nsteps;
+	int total = nand->ecc.ctx.total;
+	u8 *ecccalc = engine_conf->calc_buf;
+	const u8 *data = req->databuf.out;
+	int i, ret;
+
+	/* Ensure the OOB buffer is empty before using it */
+	if (req->oobbuf.in)
+		memset(req->oobbuf.in, 0xff, nanddev_per_page_oobsize(nand));
+
+	if (req->mode == MTD_OPS_RAW)
+		return 0;
+
+	/* This engine does not provide BBM/free OOB bytes protection */
+	if (!req->datalen)
+		return 0;
+
+	/*
+	 * Ensure OOB area is fully read/written otherwise the software
+	 * correction cannot not apply.
+	 */
+	engine_conf->reqooblen = req->ooblen;
+	req->ooblen = nanddev_per_page_oobsize(nand);
+
+	/* No preparation for page read */
+	if (req->type == NAND_PAGE_READ)
+		return 0;
+
+	/* Preparation for page write: derive the ECC bytes and place them */
+	for (i = 0; eccsteps; eccsteps--, i += eccbytes, data += eccsize)
+		nand_ecc_sw_hamming_calculate(nand, data, &ecccalc[i]);
+
+	ret = mtd_ooblayout_set_eccbytes(mtd, ecccalc, oobbuf, 0, total);
+
+	/* Also place user data OOB bytes in the free area, if any */
+	if (engine_conf->reqooblen) {
+		if (req->mode == MTD_OPS_AUTO_OOB)
+			mtd_ooblayout_set_databytes(mtd, req->oobbuf.out,
+						    oobbuf,
+						    req->ooboffs,
+						    req->ooblen);
+		else
+			memcpy(oobbuf + req->ooboffs, req->oobbuf.out,
+			       req->ooblen);
+	}
+
+	return ret;
+}
+
+static int nand_ecc_sw_hamming_finish_io_req(struct nand_device *nand,
+					     struct nand_page_io_req *req,
+					     void *oobbuf)
+{
+	struct nand_ecc_sw_hamming_conf *engine_conf = nand->ecc.ctx.priv;
+	struct mtd_info *mtd = nanddev_to_mtd(nand);
+	int eccsize = nand->ecc.ctx.conf.step_size;
+	int total = nand->ecc.ctx.total;
+	int eccbytes = engine_conf->code_size;
+	int eccsteps = engine_conf->nsteps;
+	u8 *ecccalc = engine_conf->calc_buf;
+	u8 *ecccode = engine_conf->code_buf;
+	unsigned int max_bitflips = 0;
+	u8 *data = req->databuf.in;
+	int i, ret;
+
+	if (req->mode == MTD_OPS_RAW)
+		return 0;
+
+	/* This engine does not provide BBM/free OOB bytes protection */
+	if (!req->datalen)
+		return 0;
+
+	/* Don't mess up with the upper layer: restore the request OOB length */
+	req->ooblen = engine_conf->reqooblen;
+
+	/* Nothing more to do for page write */
+	if (req->type == NAND_PAGE_WRITE)
+		return 0;
+
+	/* Finish a page read: retrieve the (raw) ECC bytes*/
+	ret = mtd_ooblayout_get_eccbytes(mtd, ecccode, oobbuf, 0, total);
+	if (ret)
+		return ret;
+
+	/* Calculate the ECC bytes */
+	for (i = 0; eccsteps; eccsteps--, i += eccbytes, data += eccsize)
+		nand_ecc_sw_hamming_calculate(nand, data, &ecccalc[i]);
+
+	eccsteps = engine_conf->nsteps;
+
+	/* Finish a page read: compare and correct */
+	for (eccsteps = engine_conf->nsteps, i = 0, data = req->databuf.in;
+	     eccsteps;
+	     eccsteps--, i += eccbytes, data += eccsize) {
+		int stat =  nand_ecc_sw_hamming_correct(nand, data,
+							&ecccode[i],
+							&ecccalc[i]);
+		if (stat < 0) {
+			mtd->ecc_stats.failed++;
+		} else {
+			mtd->ecc_stats.corrected += stat;
+			max_bitflips = max_t(unsigned int, max_bitflips, stat);
+		}
+	}
+
+	/* Format the OOB buffer that will be returned to the user */
+	if (req->ooblen) {
+		if (req->mode == MTD_OPS_AUTO_OOB)
+			mtd_ooblayout_get_databytes(mtd, oobbuf,
+						    req->oobbuf.in,
+						    req->ooboffs, req->ooblen);
+		else
+			memcpy(req->oobbuf.in, oobbuf + req->ooboffs,
+			       req->ooblen);
+	}
+
+	return max_bitflips;
+}
+
+static struct nand_ecc_engine_ops nand_ecc_sw_hamming_engine_ops = {
+	.init_ctx = nand_ecc_sw_hamming_init_ctx,
+	.cleanup_ctx = nand_ecc_sw_hamming_cleanup_ctx,
+	.prepare_io_req = nand_ecc_sw_hamming_prepare_io_req,
+	.finish_io_req = nand_ecc_sw_hamming_finish_io_req,
+};
+
+static struct nand_ecc_engine nand_ecc_sw_hamming_engine = {
+	.ops = &nand_ecc_sw_hamming_engine_ops,
+};
+
+struct nand_ecc_engine *nand_ecc_sw_hamming_get_engine(void)
+{
+	return &nand_ecc_sw_hamming_engine;
+}
+EXPORT_SYMBOL(nand_ecc_sw_hamming_get_engine);
+
 MODULE_LICENSE("GPL");
 MODULE_AUTHOR("Frans Meulenbroeks <fransmeulenbroeks@gmail.com>");
 MODULE_DESCRIPTION("NAND software Hamming ECC support");
diff --git a/drivers/mtd/nand/raw/nand_base.c b/drivers/mtd/nand/raw/nand_base.c
index 8b910c818755..3149af72f519 100644
--- a/drivers/mtd/nand/raw/nand_base.c
+++ b/drivers/mtd/nand/raw/nand_base.c
@@ -4849,34 +4849,24 @@ static void nand_scan_ident_cleanup(struct nand_chip *chip)
 
 int rawnand_sw_hamming_init(struct nand_chip *chip)
 {
-	struct mtd_info *mtd = nand_to_mtd(chip);
 	struct nand_ecc_sw_hamming_conf *engine_conf;
 	struct nand_device *base = &chip->base;
+	int ret;
 
 	base->ecc.user_conf.provider = NAND_ECC_SOFT;
 	base->ecc.user_conf.algo = NAND_ECC_HAMMING;
 	base->ecc.user_conf.strength = chip->ecc.strength;
 	base->ecc.user_conf.step_size = chip->ecc.size;
 
-	if (base->ecc.user_conf.strength != 1 ||
-	    (base->ecc.user_conf.step_size != 256 &&
-	     base->ecc.user_conf.step_size != 512)) {
-		pr_err("%s: unsupported strength or step size\n", __func__);
-		return -EINVAL;
-	}
+	ret = nand_ecc_sw_hamming_init_ctx(base);
+	if (ret)
+		return ret;
 
-	engine_conf = kzalloc(sizeof(*engine_conf), GFP_KERNEL);
-	if (!engine_conf)
-		return -ENOMEM;
-
-	engine_conf->code_size = 3;
-	engine_conf->nsteps = mtd->writesize / base->ecc.user_conf.step_size;
+	engine_conf = base->ecc.ctx.priv;
 
 	if (chip->ecc.options & NAND_ECC_SOFT_HAMMING_SM_ORDER)
 		engine_conf->sm_order = true;
 
-	base->ecc.ctx.priv = engine_conf;
-
 	chip->ecc.size = base->ecc.ctx.conf.step_size;
 	chip->ecc.strength = base->ecc.ctx.conf.strength;
 	chip->ecc.total = base->ecc.ctx.total;
@@ -4912,7 +4902,7 @@ void rawnand_sw_hamming_cleanup(struct nand_chip *chip)
 {
 	struct nand_device *base = &chip->base;
 
-	kfree(base->ecc.ctx.priv);
+	nand_ecc_sw_hamming_cleanup_ctx(base);
 }
 EXPORT_SYMBOL(rawnand_sw_hamming_cleanup);
 
@@ -5376,7 +5366,8 @@ static int nand_scan_tail(struct nand_chip *chip)
 	 * If no default placement scheme is given, select an appropriate one.
 	 */
 	if (!mtd->ooblayout &&
-	    !(ecc->mode == NAND_ECC_SOFT && ecc->algo == NAND_ECC_BCH)) {
+	    !(ecc->mode == NAND_ECC_SOFT && ecc->algo == NAND_ECC_BCH) &&
+	    !(ecc->mode == NAND_ECC_SOFT && ecc->algo == NAND_ECC_HAMMING)) {
 		switch (mtd->oobsize) {
 		case 8:
 		case 16:
diff --git a/include/linux/mtd/nand-ecc-sw-hamming.h b/include/linux/mtd/nand-ecc-sw-hamming.h
index 4d41d6ec9fe7..9ea096aaf230 100644
--- a/include/linux/mtd/nand-ecc-sw-hamming.h
+++ b/include/linux/mtd/nand-ecc-sw-hamming.h
@@ -32,6 +32,8 @@ struct nand_ecc_sw_hamming_conf {
 
 #if IS_REACHABLE(CONFIG_MTD_NAND_ECC_SW_HAMMING)
 
+int nand_ecc_sw_hamming_init_ctx(struct nand_device *nand);
+void nand_ecc_sw_hamming_cleanup_ctx(struct nand_device *nand);
 int ecc_sw_hamming_calculate(const unsigned char *buf, unsigned int step_size,
 			     unsigned char *code, bool sm_order);
 int nand_ecc_sw_hamming_calculate(struct nand_device *nand,
@@ -43,9 +45,17 @@ int ecc_sw_hamming_correct(unsigned char *buf, unsigned char *read_ecc,
 int nand_ecc_sw_hamming_correct(struct nand_device *nand, unsigned char *buf,
 				unsigned char *read_ecc,
 				unsigned char *calc_ecc);
+struct nand_ecc_engine *nand_ecc_sw_hamming_get_engine(void);
 
 #else /* !CONFIG_MTD_NAND_ECC_SW_HAMMING */
 
+static inline int nand_ecc_sw_hamming_init_ctx(struct nand_device *nand)
+{
+	return -ENOTSUPP;
+}
+
+static inline void nand_ecc_sw_hamming_cleanup_ctx(struct nand_device *nand) {}
+
 static inline int ecc_sw_hamming_calculate(const unsigned char *buf,
 					   unsigned int step_size,
 					   unsigned char *code, bool sm_order)
@@ -76,6 +86,11 @@ static inline int nand_ecc_sw_hamming_correct(struct nand_device *nand,
 	return -ENOTSUPP;
 }
 
+static inline struct nand_ecc_engine *nand_ecc_sw_hamming_get_engine(void)
+{
+	return NULL;
+}
+
 #endif /* CONFIG_MTD_NAND_ECC_SW_HAMMING */
 
 #endif /* __MTD_NAND_ECC_SW_HAMMING_H__ */
-- 
2.19.1


______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
