[PATCH v2 29/36] mtd: spinand: Move ECC related definitions earlier in the driver

From: Miquel Raynal <miquel.raynal@bootlin.com>
To: Boris Brezillon <bbrezillon@kernel.org>,
	Richard Weinberger <richard@nod.at>,
	David Woodhouse <dwmw2@infradead.org>,
	Brian Norris <computersforpeace@gmail.com>,
	Marek Vasut <marek.vasut@gmail.com>,
	Tudor Ambarus <Tudor.Ambarus@microchip.com>
Cc: Vignesh R <vigneshr@ti.com>,
	Tudor Ambarus <tudor.ambarus@microchip.com>,
	Julien Su <juliensu@mxic.com.tw>,
	Schrempf Frieder <frieder.schrempf@kontron.de>,
	Paul Cercueil <paul@crapouillou.net>,
	linux-mtd@lists.infradead.org,
	Thomas Petazzoni <thomas.petazzoni@bootlin.com>,
	Miquel Raynal <miquel.raynal@bootlin.com>,
	Mason Yang <masonccyang@mxic.com.tw>,
	linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 29/36] mtd: spinand: Move ECC related definitions earlier in the driver
Date: Mon,  4 Mar 2019 23:28:34 +0100	[thread overview]
Message-ID: <20190304222841.13899-30-miquel.raynal@bootlin.com> (raw)
In-Reply-To: <20190304222841.13899-1-miquel.raynal@bootlin.com>

Prepare the creation of a SPI-NAND chips on-die ECC engine by
gathering the ECC-related code earlier enough in the core to avoid the
need for forward declarations.

The next step is to actually create that engine by implementing the
generic ECC interface.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
---
 drivers/mtd/nand/spi/core.c              | 106 +++++++++++------------
 drivers/mtd/nand/spi/on-die-ecc-engine.c |   0
 2 files changed, 53 insertions(+), 53 deletions(-)
 create mode 100644 drivers/mtd/nand/spi/on-die-ecc-engine.c

diff --git a/drivers/mtd/nand/spi/core.c b/drivers/mtd/nand/spi/core.c
index 9c8a5ee626cd..43f0e97c1808 100644
--- a/drivers/mtd/nand/spi/core.c
+++ b/drivers/mtd/nand/spi/core.c
@@ -207,6 +207,59 @@ static int spinand_ecc_enable(struct spinand_device *spinand,
 			       enable ? CFG_ECC_ENABLE : 0);
 }
 
+static int spinand_check_ecc_status(struct spinand_device *spinand, u8 status)
+{
+	struct nand_device *nand = spinand_to_nand(spinand);
+
+	if (spinand->eccinfo.get_status)
+		return spinand->eccinfo.get_status(spinand, status);
+
+	switch (status & STATUS_ECC_MASK) {
+	case STATUS_ECC_NO_BITFLIPS:
+		return 0;
+
+	case STATUS_ECC_HAS_BITFLIPS:
+		/*
+		 * We have no way to know exactly how many bitflips have been
+		 * fixed, so let's return the maximum possible value so that
+		 * wear-leveling layers move the data immediately.
+		 */
+		return nand->ecc.ctx.conf.strength;
+
+	case STATUS_ECC_UNCOR_ERROR:
+		return -EBADMSG;
+
+	default:
+		break;
+	}
+
+	return -EINVAL;
+}
+
+static int spinand_noecc_ooblayout_ecc(struct mtd_info *mtd, int section,
+				       struct mtd_oob_region *region)
+{
+	return -ERANGE;
+}
+
+static int spinand_noecc_ooblayout_free(struct mtd_info *mtd, int section,
+					struct mtd_oob_region *region)
+{
+	if (section)
+		return -ERANGE;
+
+	/* Reserve 2 bytes for the BBM. */
+	region->offset = 2;
+	region->length = 62;
+
+	return 0;
+}
+
+static const struct mtd_ooblayout_ops spinand_noecc_ooblayout = {
+	.ecc = spinand_noecc_ooblayout_ecc,
+	.free = spinand_noecc_ooblayout_free,
+};
+
 static int spinand_write_enable_op(struct spinand_device *spinand)
 {
 	struct spi_mem_op op = SPINAND_WR_EN_DIS_OP(true);
@@ -463,35 +516,6 @@ static int spinand_lock_block(struct spinand_device *spinand, u8 lock)
 	return spinand_write_reg_op(spinand, REG_BLOCK_LOCK, lock);
 }
 
-static int spinand_check_ecc_status(struct spinand_device *spinand, u8 status)
-{
-	struct nand_device *nand = spinand_to_nand(spinand);
-
-	if (spinand->eccinfo.get_status)
-		return spinand->eccinfo.get_status(spinand, status);
-
-	switch (status & STATUS_ECC_MASK) {
-	case STATUS_ECC_NO_BITFLIPS:
-		return 0;
-
-	case STATUS_ECC_HAS_BITFLIPS:
-		/*
-		 * We have no way to know exactly how many bitflips have been
-		 * fixed, so let's return the maximum possible value so that
-		 * wear-leveling layers move the data immediately.
-		 */
-		return nand->ecc.ctx.conf.strength;
-
-	case STATUS_ECC_UNCOR_ERROR:
-		return -EBADMSG;
-
-	default:
-		break;
-	}
-
-	return -EINVAL;
-}
-
 static int spinand_read_page(struct spinand_device *spinand,
 			     const struct nand_page_io_req *req,
 			     bool ecc_enabled)
@@ -937,30 +961,6 @@ static int spinand_detect(struct spinand_device *spinand)
 	return 0;
 }
 
-static int spinand_noecc_ooblayout_ecc(struct mtd_info *mtd, int section,
-				       struct mtd_oob_region *region)
-{
-	return -ERANGE;
-}
-
-static int spinand_noecc_ooblayout_free(struct mtd_info *mtd, int section,
-					struct mtd_oob_region *region)
-{
-	if (section)
-		return -ERANGE;
-
-	/* Reserve 2 bytes for the BBM. */
-	region->offset = 2;
-	region->length = 62;
-
-	return 0;
-}
-
-static const struct mtd_ooblayout_ops spinand_noecc_ooblayout = {
-	.ecc = spinand_noecc_ooblayout_ecc,
-	.free = spinand_noecc_ooblayout_free,
-};
-
 static int spinand_init(struct spinand_device *spinand)
 {
 	struct device *dev = &spinand->spimem->spi->dev;
diff --git a/drivers/mtd/nand/spi/on-die-ecc-engine.c b/drivers/mtd/nand/spi/on-die-ecc-engine.c
new file mode 100644
index 000000000000..e69de29bb2d1
-- 
2.19.1


______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
