From: Jagan Teki <jagan-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org>
To: Simon Glass <sjg-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org>,
Philipp Tomsich
<philipp.tomsich-SN7IsUiht6C/RdPyistoZJqQE7yCjDx5@public.gmane.org>,
Kever Yang <kever.yang-TNX95d0MmH7DzftRWevZcw@public.gmane.org>,
Akash Gajjar <akash-oRp2ZoJdM/RWk0Htik3J/w@public.gmane.org>
Cc: linux-rockchip-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
linux-amarula-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org,
Jagan Teki
<jagan-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org>,
u-boot-0aAXYlwwYIKGBzrmiIFOJg@public.gmane.org
Subject: [PATCH v2 04/14] Kconfig: Add default SPL_FIT_GENERATOR for rockchip
Date: Tue, 16 Apr 2019 16:26:37 +0530 [thread overview]
Message-ID: <20190416105647.18437-5-jagan@amarulasolutions.com> (raw)
In-Reply-To: <20190416105647.18437-1-jagan-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org>
Add default SPL_FIT_GENERATOR py script for rockchip platforms if
specific target enabled SPL_LOAD_FIT.
So, this would help get rid of explicitly mentioning the default
SPL FIT generator in defconfigs. however some targets, like puma_rk3399
still require their own FIT generator so in those cases the default will
override with defconfig defined generator.
Signed-off-by: Jagan Teki <jagan-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org>
---
Kconfig | 1 +
configs/chromebook_bob_defconfig | 1 -
configs/evb-rk3399_defconfig | 1 -
configs/ficus-rk3399_defconfig | 1 -
configs/firefly-rk3399_defconfig | 1 -
configs/rock960-rk3399_defconfig | 1 -
6 files changed, 1 insertion(+), 5 deletions(-)
diff --git a/Kconfig b/Kconfig
index 305b265ed7..5679a288ec 100644
--- a/Kconfig
+++ b/Kconfig
@@ -424,6 +424,7 @@ config SPL_FIT_GENERATOR
string ".its file generator script for U-Boot FIT image"
depends on SPL_FIT
default "board/sunxi/mksunxi_fit_atf.sh" if SPL_LOAD_FIT && ARCH_SUNXI
+ default "arch/arm/mach-rockchip/make_fit_atf.py" if SPL_LOAD_FIT && ARCH_ROCKCHIP
help
Specifies a (platform specific) script file to generate the FIT
source file used to build the U-Boot FIT image file. This gets
diff --git a/configs/chromebook_bob_defconfig b/configs/chromebook_bob_defconfig
index ce3deccb8a..04e25e1d4f 100644
--- a/configs/chromebook_bob_defconfig
+++ b/configs/chromebook_bob_defconfig
@@ -19,7 +19,6 @@ CONFIG_DEBUG_UART=y
CONFIG_NR_DRAM_BANKS=1
CONFIG_FIT=y
CONFIG_SPL_LOAD_FIT=y
-CONFIG_SPL_FIT_GENERATOR="arch/arm/mach-rockchip/make_fit_atf.py"
CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399-gru-bob.dtb"
# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_DISPLAY_BOARDINFO_LATE=y
diff --git a/configs/evb-rk3399_defconfig b/configs/evb-rk3399_defconfig
index d98535357a..49b2e2e089 100644
--- a/configs/evb-rk3399_defconfig
+++ b/configs/evb-rk3399_defconfig
@@ -13,7 +13,6 @@ CONFIG_DEBUG_UART=y
CONFIG_NR_DRAM_BANKS=1
CONFIG_FIT=y
CONFIG_SPL_LOAD_FIT=y
-CONFIG_SPL_FIT_GENERATOR="arch/arm/mach-rockchip/make_fit_atf.py"
CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399-evb.dtb"
# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_DISPLAY_BOARDINFO_LATE=y
diff --git a/configs/ficus-rk3399_defconfig b/configs/ficus-rk3399_defconfig
index 94c565efc2..fe3b9964e8 100644
--- a/configs/ficus-rk3399_defconfig
+++ b/configs/ficus-rk3399_defconfig
@@ -13,7 +13,6 @@ CONFIG_SPL_STACK_R_ADDR=0x80000
CONFIG_DEBUG_UART=y
CONFIG_FIT=y
CONFIG_SPL_LOAD_FIT=y
-CONFIG_SPL_FIT_GENERATOR="arch/arm/mach-rockchip/make_fit_atf.py"
# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_DISPLAY_BOARDINFO_LATE=y
CONFIG_SPL_STACK_R=y
diff --git a/configs/firefly-rk3399_defconfig b/configs/firefly-rk3399_defconfig
index 6725b48970..914304bb43 100644
--- a/configs/firefly-rk3399_defconfig
+++ b/configs/firefly-rk3399_defconfig
@@ -13,7 +13,6 @@ CONFIG_DEBUG_UART=y
CONFIG_NR_DRAM_BANKS=1
CONFIG_FIT=y
CONFIG_SPL_LOAD_FIT=y
-CONFIG_SPL_FIT_GENERATOR="arch/arm/mach-rockchip/make_fit_atf.py"
CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399-firefly.dtb"
# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_DISPLAY_BOARDINFO_LATE=y
diff --git a/configs/rock960-rk3399_defconfig b/configs/rock960-rk3399_defconfig
index cb5a35f4f5..5e6778ea20 100644
--- a/configs/rock960-rk3399_defconfig
+++ b/configs/rock960-rk3399_defconfig
@@ -13,7 +13,6 @@ CONFIG_SPL_STACK_R_ADDR=0x80000
CONFIG_DEBUG_UART=y
CONFIG_FIT=y
CONFIG_SPL_LOAD_FIT=y
-CONFIG_SPL_FIT_GENERATOR="arch/arm/mach-rockchip/make_fit_atf.py"
CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399-rock960.dtb"
# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_DISPLAY_BOARDINFO_LATE=y
--
2.18.0.321.gffc6fa0e3
WARNING: multiple messages have this Message-ID (diff)
From: Jagan Teki <jagan@amarulasolutions.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v2 04/14] Kconfig: Add default SPL_FIT_GENERATOR for rockchip
Date: Tue, 16 Apr 2019 16:26:37 +0530 [thread overview]
Message-ID: <20190416105647.18437-5-jagan@amarulasolutions.com> (raw)
In-Reply-To: <20190416105647.18437-1-jagan@amarulasolutions.com>
Add default SPL_FIT_GENERATOR py script for rockchip platforms if
specific target enabled SPL_LOAD_FIT.
So, this would help get rid of explicitly mentioning the default
SPL FIT generator in defconfigs. however some targets, like puma_rk3399
still require their own FIT generator so in those cases the default will
override with defconfig defined generator.
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
---
Kconfig | 1 +
configs/chromebook_bob_defconfig | 1 -
configs/evb-rk3399_defconfig | 1 -
configs/ficus-rk3399_defconfig | 1 -
configs/firefly-rk3399_defconfig | 1 -
configs/rock960-rk3399_defconfig | 1 -
6 files changed, 1 insertion(+), 5 deletions(-)
diff --git a/Kconfig b/Kconfig
index 305b265ed7..5679a288ec 100644
--- a/Kconfig
+++ b/Kconfig
@@ -424,6 +424,7 @@ config SPL_FIT_GENERATOR
string ".its file generator script for U-Boot FIT image"
depends on SPL_FIT
default "board/sunxi/mksunxi_fit_atf.sh" if SPL_LOAD_FIT && ARCH_SUNXI
+ default "arch/arm/mach-rockchip/make_fit_atf.py" if SPL_LOAD_FIT && ARCH_ROCKCHIP
help
Specifies a (platform specific) script file to generate the FIT
source file used to build the U-Boot FIT image file. This gets
diff --git a/configs/chromebook_bob_defconfig b/configs/chromebook_bob_defconfig
index ce3deccb8a..04e25e1d4f 100644
--- a/configs/chromebook_bob_defconfig
+++ b/configs/chromebook_bob_defconfig
@@ -19,7 +19,6 @@ CONFIG_DEBUG_UART=y
CONFIG_NR_DRAM_BANKS=1
CONFIG_FIT=y
CONFIG_SPL_LOAD_FIT=y
-CONFIG_SPL_FIT_GENERATOR="arch/arm/mach-rockchip/make_fit_atf.py"
CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399-gru-bob.dtb"
# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_DISPLAY_BOARDINFO_LATE=y
diff --git a/configs/evb-rk3399_defconfig b/configs/evb-rk3399_defconfig
index d98535357a..49b2e2e089 100644
--- a/configs/evb-rk3399_defconfig
+++ b/configs/evb-rk3399_defconfig
@@ -13,7 +13,6 @@ CONFIG_DEBUG_UART=y
CONFIG_NR_DRAM_BANKS=1
CONFIG_FIT=y
CONFIG_SPL_LOAD_FIT=y
-CONFIG_SPL_FIT_GENERATOR="arch/arm/mach-rockchip/make_fit_atf.py"
CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399-evb.dtb"
# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_DISPLAY_BOARDINFO_LATE=y
diff --git a/configs/ficus-rk3399_defconfig b/configs/ficus-rk3399_defconfig
index 94c565efc2..fe3b9964e8 100644
--- a/configs/ficus-rk3399_defconfig
+++ b/configs/ficus-rk3399_defconfig
@@ -13,7 +13,6 @@ CONFIG_SPL_STACK_R_ADDR=0x80000
CONFIG_DEBUG_UART=y
CONFIG_FIT=y
CONFIG_SPL_LOAD_FIT=y
-CONFIG_SPL_FIT_GENERATOR="arch/arm/mach-rockchip/make_fit_atf.py"
# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_DISPLAY_BOARDINFO_LATE=y
CONFIG_SPL_STACK_R=y
diff --git a/configs/firefly-rk3399_defconfig b/configs/firefly-rk3399_defconfig
index 6725b48970..914304bb43 100644
--- a/configs/firefly-rk3399_defconfig
+++ b/configs/firefly-rk3399_defconfig
@@ -13,7 +13,6 @@ CONFIG_DEBUG_UART=y
CONFIG_NR_DRAM_BANKS=1
CONFIG_FIT=y
CONFIG_SPL_LOAD_FIT=y
-CONFIG_SPL_FIT_GENERATOR="arch/arm/mach-rockchip/make_fit_atf.py"
CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399-firefly.dtb"
# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_DISPLAY_BOARDINFO_LATE=y
diff --git a/configs/rock960-rk3399_defconfig b/configs/rock960-rk3399_defconfig
index cb5a35f4f5..5e6778ea20 100644
--- a/configs/rock960-rk3399_defconfig
+++ b/configs/rock960-rk3399_defconfig
@@ -13,7 +13,6 @@ CONFIG_SPL_STACK_R_ADDR=0x80000
CONFIG_DEBUG_UART=y
CONFIG_FIT=y
CONFIG_SPL_LOAD_FIT=y
-CONFIG_SPL_FIT_GENERATOR="arch/arm/mach-rockchip/make_fit_atf.py"
CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399-rock960.dtb"
# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_DISPLAY_BOARDINFO_LATE=y
--
2.18.0.321.gffc6fa0e3
next prev parent reply other threads:[~2019-04-16 10:56 UTC|newest]
Thread overview: 68+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-04-16 10:56 [PATCH v2 00/14] rockchip: Add new rk3399 boards Jagan Teki
2019-04-16 10:56 ` [U-Boot] " Jagan Teki
[not found] ` <20190416105647.18437-1-jagan-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org>
2019-04-16 10:56 ` [PATCH v2 01/14] rockchip: dts: rk3399: Sync rk3399-opp from Linux Jagan Teki
2019-04-16 10:56 ` [U-Boot] " Jagan Teki
[not found] ` <20190416105647.18437-2-jagan-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org>
2019-04-16 11:59 ` Paul Kocialkowski
2019-04-16 11:59 ` Paul Kocialkowski
2019-04-16 10:56 ` [PATCH v2 02/14] rockchip: dts: rk3399: Sync pwm2_pin_pull_down from Linux 5.1-rc2 Jagan Teki
2019-04-16 10:56 ` [U-Boot] " Jagan Teki
[not found] ` <20190416105647.18437-3-jagan-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org>
2019-04-16 12:00 ` Paul Kocialkowski
2019-04-16 12:00 ` Paul Kocialkowski
2019-04-16 10:56 ` [PATCH v2 03/14] rockchip: dts: rk3399: Create initial rk3399-u-boot.dtsi Jagan Teki
2019-04-16 10:56 ` [U-Boot] " Jagan Teki
[not found] ` <20190416105647.18437-4-jagan-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org>
2019-04-16 12:00 ` Paul Kocialkowski
2019-04-16 12:00 ` Paul Kocialkowski
2019-04-16 10:56 ` Jagan Teki [this message]
2019-04-16 10:56 ` [U-Boot] [PATCH v2 04/14] Kconfig: Add default SPL_FIT_GENERATOR for rockchip Jagan Teki
[not found] ` <20190416105647.18437-5-jagan-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org>
2019-04-16 12:01 ` Paul Kocialkowski
2019-04-16 12:01 ` Paul Kocialkowski
2019-04-16 10:56 ` [PATCH v2 05/14] arm: rockchip: rk3399: Move common configs in Kconfig Jagan Teki
2019-04-16 10:56 ` [U-Boot] " Jagan Teki
[not found] ` <20190416105647.18437-6-jagan-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org>
2019-04-16 12:02 ` Paul Kocialkowski
2019-04-16 12:02 ` Paul Kocialkowski
2019-04-16 10:56 ` [PATCH v2 06/14] rockchip: rk3399: Add Orangepi RK3399 support Jagan Teki
2019-04-16 10:56 ` [U-Boot] " Jagan Teki
[not found] ` <20190416105647.18437-7-jagan-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org>
2019-04-16 12:03 ` Paul Kocialkowski
2019-04-16 12:03 ` Paul Kocialkowski
2019-04-16 10:56 ` [PATCH v2 07/14] rockchip: dts: rk3399: Sync rk3399-nanopi4.dtsi from Linux Jagan Teki
2019-04-16 10:56 ` [U-Boot] " Jagan Teki
[not found] ` <20190416105647.18437-8-jagan-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org>
2019-04-16 12:04 ` Paul Kocialkowski
2019-04-16 12:04 ` Paul Kocialkowski
2019-04-16 10:56 ` [PATCH v2 08/14] rockchip: dts: rk3399: nanopi4: Use CD pin as RK_FUNC_1 Jagan Teki
2019-04-16 10:56 ` [U-Boot] " Jagan Teki
[not found] ` <20190416105647.18437-9-jagan-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org>
2019-04-16 11:10 ` Robin Murphy
2019-04-16 11:10 ` [U-Boot] " Robin Murphy
[not found] ` <148886f2-b1f2-8e90-c6cc-00fd49d98c86-5wv7dgnIgG8@public.gmane.org>
2019-04-17 11:09 ` Jagan Teki
2019-04-17 11:09 ` [U-Boot] " Jagan Teki
2019-04-16 10:56 ` [PATCH v2 09/14] rockchip: rk3399: Add 4GB LPDDR3-1866 DMC settings Jagan Teki
2019-04-16 10:56 ` [U-Boot] " Jagan Teki
2019-04-17 7:40 ` [PATCH v2 09/14] rockchip: rk3399: Add 4GB LPDDR3-1866 DMC settings【请注意，邮件由linux-rockchip-bounces+kever.yang=rock-chips.com@lists.infradead.org代发】 Kever Yang
2019-04-17 7:40 ` [U-Boot] " Kever Yang
2019-04-17 11:11 ` Jagan Teki
2019-04-17 11:11 ` [U-Boot] " Jagan Teki
2019-04-18 2:57 ` Kever Yang
2019-04-18 2:57 ` [U-Boot] " Kever Yang
[not found] ` <12b48e92-be80-3600-6ab2-2c0d4c132603-TNX95d0MmH7DzftRWevZcw@public.gmane.org>
2019-04-18 6:30 ` Philipp Tomsich
2019-04-18 6:30 ` [U-Boot] " Philipp Tomsich
2019-04-16 10:56 ` [PATCH v2 10/14] rockchip: rk3399: Add Nanopi M4 board support Jagan Teki
2019-04-16 10:56 ` [U-Boot] " Jagan Teki
[not found] ` <20190416105647.18437-11-jagan-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org>
2019-04-16 12:04 ` Paul Kocialkowski
2019-04-16 12:04 ` Paul Kocialkowski
2019-04-16 10:56 ` [PATCH v2 11/14] rockchip: rk3399: Add Nanopc T4 " Jagan Teki
2019-04-16 10:56 ` [U-Boot] " Jagan Teki
[not found] ` <20190416105647.18437-12-jagan-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org>
2019-04-16 12:05 ` Paul Kocialkowski
2019-04-16 12:05 ` Paul Kocialkowski
2019-04-16 10:56 ` [PATCH v2 12/14] rockchip: rk3399: Add Nanopi NEO4 " Jagan Teki
2019-04-16 10:56 ` [U-Boot] " Jagan Teki
[not found] ` <20190416105647.18437-13-jagan-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org>
2019-04-16 12:06 ` Paul Kocialkowski
2019-04-16 12:06 ` Paul Kocialkowski
2019-04-16 10:56 ` [PATCH v2 13/14] rockchip: rk3399: Add Rockpro64 " Jagan Teki
2019-04-16 10:56 ` [U-Boot] " Jagan Teki
[not found] ` <20190416105647.18437-14-jagan-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org>
2019-04-16 12:07 ` Paul Kocialkowski
2019-04-16 12:07 ` [U-Boot] " Paul Kocialkowski
2019-04-16 10:56 ` [PATCH v2 14/14] doc: rockchip: Add global doc for rk3399 build/flash Jagan Teki
2019-04-16 10:56 ` [U-Boot] " Jagan Teki
2019-04-16 11:58 ` [PATCH v2 00/14] rockchip: Add new rk3399 boards Paul Kocialkowski
2019-04-16 11:58 ` [U-Boot] " Paul Kocialkowski
2019-04-17 11:19 ` Jagan Teki
2019-04-17 11:19 ` [U-Boot] " Jagan Teki
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190416105647.18437-5-jagan@amarulasolutions.com \
--to=jagan-dyjbcgdgk7pe9whmmfpqlfatqe2ktcn/@public.gmane.org \
--cc=akash-oRp2ZoJdM/RWk0Htik3J/w@public.gmane.org \
--cc=kever.yang-TNX95d0MmH7DzftRWevZcw@public.gmane.org \
--cc=linux-amarula-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org \
--cc=linux-rockchip-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
--cc=philipp.tomsich-SN7IsUiht6C/RdPyistoZJqQE7yCjDx5@public.gmane.org \
--cc=sjg-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org \
--cc=u-boot-0aAXYlwwYIKGBzrmiIFOJg@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.