Re: [PATCH v4 2/2] dt-bindings: cpufreq: Document allwinner,sun50i-h6-operating-points

From: Maxime Ripard <maxime.ripard@bootlin.com>
To: Yangtao Li <tiny.windzz@gmail.com>
Cc: vireshk@kernel.org, nm@ti.com, sboyd@kernel.org,
	robh+dt@kernel.org, mark.rutland@arm.com, wens@csie.org,
	rjw@rjwysocki.net, davem@davemloft.net,
	mchehab+samsung@kernel.org, gregkh@linuxfoundation.org,
	nicolas.ferre@microchip.com, linux-pm@vger.kernel.org,
	devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org
Subject: Re: [PATCH v4 2/2] dt-bindings: cpufreq: Document allwinner,sun50i-h6-operating-points
Date: Wed, 17 Apr 2019 10:30:00 +0200	[thread overview]
Message-ID: <20190417083000.cwzvhlpbxqoifosw@flea> (raw)
In-Reply-To: <20190416155209.24216-3-tiny.windzz@gmail.com>

[-- Attachment #1: Type: text/plain, Size: 3023 bytes --]

On Tue, Apr 16, 2019 at 11:52:09AM -0400, Yangtao Li wrote:
> Allwinner Process Voltage Scaling Tables defines the voltage and
> frequency value based on the speedbin blown in the efuse combination.
> The sunxi-cpufreq-nvmem driver reads the efuse value from the SoC to
> provide the OPP framework with required information.
> This is used to determine the voltage and frequency value for each
> OPP of operating-points-v2 table when it is parsed by the OPP framework.
>
> The "allwinner,sun50i-h6-operating-points" DT extends the
> "operating-points-v2"
> with following parameters:
> - nvmem-cells (NVMEM area containig the speedbin information)
> - opp-microvolt-<name>: voltage in micro Volts.
>   At runtime, the platform can pick a <name> and matching
>   opp-microvolt-<name> property.
> 			HW:		<name>:
> 			sun50iw-h6      speed0 speed1 speed2
>
> Signed-off-by: Yangtao Li <tiny.windzz@gmail.com>
> ---
>  .../bindings/opp/sun50i-nvmem-cpufreq.txt     | 167 ++++++++++++++++++
>  1 file changed, 167 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/opp/sun50i-nvmem-cpufreq.txt
>
> diff --git a/Documentation/devicetree/bindings/opp/sun50i-nvmem-cpufreq.txt b/Documentation/devicetree/bindings/opp/sun50i-nvmem-cpufreq.txt
> new file mode 100644
> index 000000000000..3cb39c6caec3
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/opp/sun50i-nvmem-cpufreq.txt
> @@ -0,0 +1,167 @@
> +Allwinner Technologies, Inc. NVMEM CPUFreq and OPP bindings
> +===================================
> +
> +For some SoCs, the CPU frequency subset and voltage value of each OPP
> +varies based on the silicon variant in use. Allwinner Process Voltage
> +Scaling Tables defines the voltage and frequency value based on the
> +speedbin blown in the efuse combination. The sun50i-cpufreq-nvmem driver
> +reads the efuse value from the SoC to provide the OPP framework with
> +required information.
> +
> +Required properties:
> +--------------------
> +In 'cpus' nodes:
> +- operating-points-v2: Phandle to the operating-points-v2 table to use.
> +
> +In 'operating-points-v2' table:
> +- compatible: Should be
> +	- 'allwinner,sun50i-h6-operating-points'.
> +- nvmem-cells: A phandle pointing to a nvmem-cells node representing the
> +		efuse registers that has information about the speedbin
> +		that is used to select the right frequency/voltage value
> +		pair. Please refer the for nvmem-cells bindings
> +		Documentation/devicetree/bindings/nvmem/nvmem.txt and
> +		also examples below.
> +
> +In every OPP node:
> +- opp-microvolt-<name>: Voltage in micro Volts.
> +			At runtime, the platform can pick a <name> and
> +			matching opp-microvolt-<name> property.
> +			[See: opp.txt]
> +			HW:		<name>:
> +			sun50iw-h6	speed0 speed1 speed2

There's a typo here (and in your commit log), it should be sun50i-h6
instead of sun50iw-h6

Once fixed:
Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>

Thanks!
Maxime

--
Maxime Ripard, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]