[PATCH 2/3] iio: stmpe-adc: Make wait_completion non interruptible

From: Philippe Schenker <dev@pschenker.ch>
To: linux-iio@vger.kernel.org, Jonathan Cameron <jic23@kernel.org>,
	Stefan Agner <stefan@agner.ch>, Hartmut Knaack <knaack.h@gmx.de>,
	Lars-Peter Clausen <lars@metafoo.de>,
	Peter Meerwald-Stadler <pmeerw@pmeerw.net>
Cc: dev@pschenker.ch,
	Philippe Schenker <philippe.schenker@toradex.com>,
	Max Krummenacher <max.krummenacher@toradex.com>,
	Alexandre Torgue <alexandre.torgue@st.com>,
	linux-kernel@vger.kernel.org, Lee Jones <lee.jones@linaro.org>,
	Maxime Coquelin <mcoquelin.stm32@gmail.com>,
	linux-stm32@st-md-mailman.stormreply.com,
	linux-arm-kernel@lists.infradead.org
Subject: [PATCH 2/3] iio: stmpe-adc: Make wait_completion non interruptible
Date: Fri,  3 May 2019 15:57:24 +0200	[thread overview]
Message-ID: <20190503135725.9959-2-dev@pschenker.ch> (raw)
In-Reply-To: <20190503135725.9959-1-dev@pschenker.ch>

From: Philippe Schenker <philippe.schenker@toradex.com>

In some cases, the wait_completion got interrupted. This caused the
error-handling to mutex_unlock the function. The before turned on
interrupt then got called anyway. In the ISR then completion()
was called causing problems.

Making this wait_completion non interruptible solves the problem.

Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com>
---

 drivers/iio/adc/stmpe-adc.c | 6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

diff --git a/drivers/iio/adc/stmpe-adc.c b/drivers/iio/adc/stmpe-adc.c
index 87141177fbda..baa41ffc0d76 100644
--- a/drivers/iio/adc/stmpe-adc.c
+++ b/drivers/iio/adc/stmpe-adc.c
@@ -78,8 +78,7 @@ static int stmpe_read_voltage(struct stmpe_adc *info,
 	stmpe_reg_write(info->stmpe, STMPE_REG_ADC_CAPT,
 			STMPE_ADC_CH(info->channel));
 
-	ret = wait_for_completion_interruptible_timeout
-		(&info->completion, STMPE_ADC_TIMEOUT);
+	ret = wait_for_completion_timeout(&info->completion, STMPE_ADC_TIMEOUT);
 
 	if (ret <= 0) {
 		mutex_unlock(&info->lock);
@@ -113,8 +112,7 @@ static int stmpe_read_temp(struct stmpe_adc *info,
 	stmpe_reg_write(info->stmpe, STMPE_REG_TEMP_CTRL,
 			STMPE_START_ONE_TEMP_CONV);
 
-	ret = wait_for_completion_interruptible_timeout
-		(&info->completion, STMPE_ADC_TIMEOUT);
+	ret = wait_for_completion_timeout(&info->completion, STMPE_ADC_TIMEOUT);
 
 	if (ret <= 0) {
 		mutex_unlock(&info->lock);
-- 
2.21.0

