From: Jagan Teki <jagan-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org>
To: Simon Glass <sjg-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org>,
Philipp Tomsich
<philipp.tomsich-SN7IsUiht6C/RdPyistoZJqQE7yCjDx5@public.gmane.org>,
Kever Yang <kever.yang-TNX95d0MmH7DzftRWevZcw@public.gmane.org>,
Akash Gajjar <akash-oRp2ZoJdM/RWk0Htik3J/w@public.gmane.org>
Cc: Paul Kocialkowski
<paul.kocialkowski-LDxbnhwyfcJBDgjK7y7TUQ@public.gmane.org>,
linux-rockchip-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
linux-amarula-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org,
Jagan Teki
<jagan-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org>,
u-boot-0aAXYlwwYIKGBzrmiIFOJg@public.gmane.org
Subject: [PATCH v7 02/11] Kconfig: Add default SPL_FIT_GENERATOR for rockchip
Date: Wed, 8 May 2019 00:06:18 +0530 [thread overview]
Message-ID: <20190507183625.5983-3-jagan@amarulasolutions.com> (raw)
In-Reply-To: <20190507183625.5983-1-jagan-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org>
Add default SPL_FIT_GENERATOR py script for rockchip platforms if
specific target enabled SPL_LOAD_FIT.
So, this would help get rid of explicitly mentioning the default
SPL FIT generator in defconfigs. however some targets, like puma_rk3399
still require their own FIT generator so in those cases the default will
override with defconfig defined generator.
Reviewed-by: Paul Kocialkowski <paul.kocialkowski-LDxbnhwyfcJBDgjK7y7TUQ@public.gmane.org>
Signed-off-by: Jagan Teki <jagan-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org>
---
Kconfig | 1 +
configs/chromebook_bob_defconfig | 1 -
configs/evb-rk3399_defconfig | 1 -
configs/ficus-rk3399_defconfig | 1 -
configs/firefly-rk3399_defconfig | 1 -
configs/orangepi-rk3399_defconfig | 1 -
configs/rock960-rk3399_defconfig | 1 -
7 files changed, 1 insertion(+), 6 deletions(-)
diff --git a/Kconfig b/Kconfig
index 7a5491bd67..91c1082ace 100644
--- a/Kconfig
+++ b/Kconfig
@@ -435,6 +435,7 @@ config SPL_FIT_GENERATOR
string ".its file generator script for U-Boot FIT image"
depends on SPL_FIT
default "board/sunxi/mksunxi_fit_atf.sh" if SPL_LOAD_FIT && ARCH_SUNXI
+ default "arch/arm/mach-rockchip/make_fit_atf.py" if SPL_LOAD_FIT && ARCH_ROCKCHIP
help
Specifies a (platform specific) script file to generate the FIT
source file used to build the U-Boot FIT image file. This gets
diff --git a/configs/chromebook_bob_defconfig b/configs/chromebook_bob_defconfig
index ce07a7f0ff..bd836acad5 100644
--- a/configs/chromebook_bob_defconfig
+++ b/configs/chromebook_bob_defconfig
@@ -19,7 +19,6 @@ CONFIG_SPL_SPI_SUPPORT=y
CONFIG_DEBUG_UART=y
CONFIG_FIT=y
CONFIG_SPL_LOAD_FIT=y
-CONFIG_SPL_FIT_GENERATOR="arch/arm/mach-rockchip/make_fit_atf.py"
CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399-gru-bob.dtb"
# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_DISPLAY_BOARDINFO_LATE=y
diff --git a/configs/evb-rk3399_defconfig b/configs/evb-rk3399_defconfig
index 5bb910e8d4..94963e4280 100644
--- a/configs/evb-rk3399_defconfig
+++ b/configs/evb-rk3399_defconfig
@@ -13,7 +13,6 @@ CONFIG_DEBUG_UART_CLOCK=24000000
CONFIG_DEBUG_UART=y
CONFIG_FIT=y
CONFIG_SPL_LOAD_FIT=y
-CONFIG_SPL_FIT_GENERATOR="arch/arm/mach-rockchip/make_fit_atf.py"
CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399-evb.dtb"
# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_DISPLAY_BOARDINFO_LATE=y
diff --git a/configs/ficus-rk3399_defconfig b/configs/ficus-rk3399_defconfig
index 79da86b32f..926d244fbe 100644
--- a/configs/ficus-rk3399_defconfig
+++ b/configs/ficus-rk3399_defconfig
@@ -13,7 +13,6 @@ CONFIG_DEBUG_UART_CLOCK=24000000
CONFIG_DEBUG_UART=y
CONFIG_FIT=y
CONFIG_SPL_LOAD_FIT=y
-CONFIG_SPL_FIT_GENERATOR="arch/arm/mach-rockchip/make_fit_atf.py"
# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_DISPLAY_BOARDINFO_LATE=y
CONFIG_SPL_TEXT_BASE=0xff8c2000
diff --git a/configs/firefly-rk3399_defconfig b/configs/firefly-rk3399_defconfig
index 301b27e3a4..5016fb8993 100644
--- a/configs/firefly-rk3399_defconfig
+++ b/configs/firefly-rk3399_defconfig
@@ -13,7 +13,6 @@ CONFIG_DEBUG_UART_CLOCK=24000000
CONFIG_DEBUG_UART=y
CONFIG_FIT=y
CONFIG_SPL_LOAD_FIT=y
-CONFIG_SPL_FIT_GENERATOR="arch/arm/mach-rockchip/make_fit_atf.py"
CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399-firefly.dtb"
# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_DISPLAY_BOARDINFO_LATE=y
diff --git a/configs/orangepi-rk3399_defconfig b/configs/orangepi-rk3399_defconfig
index ba13976cc6..22ddd8dce3 100644
--- a/configs/orangepi-rk3399_defconfig
+++ b/configs/orangepi-rk3399_defconfig
@@ -13,7 +13,6 @@ CONFIG_DEBUG_UART=y
CONFIG_NR_DRAM_BANKS=1
CONFIG_FIT=y
CONFIG_SPL_LOAD_FIT=y
-CONFIG_SPL_FIT_GENERATOR="arch/arm/mach-rockchip/make_fit_atf.py"
CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399-orangepi.dtb"
# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_DISPLAY_BOARDINFO_LATE=y
diff --git a/configs/rock960-rk3399_defconfig b/configs/rock960-rk3399_defconfig
index 8d490be18c..48d14ef7d8 100644
--- a/configs/rock960-rk3399_defconfig
+++ b/configs/rock960-rk3399_defconfig
@@ -13,7 +13,6 @@ CONFIG_DEBUG_UART_CLOCK=24000000
CONFIG_DEBUG_UART=y
CONFIG_FIT=y
CONFIG_SPL_LOAD_FIT=y
-CONFIG_SPL_FIT_GENERATOR="arch/arm/mach-rockchip/make_fit_atf.py"
CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399-rock960.dtb"
# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_DISPLAY_BOARDINFO_LATE=y
--
2.18.0.321.gffc6fa0e3
WARNING: multiple messages have this Message-ID (diff)
From: Jagan Teki <jagan@amarulasolutions.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v7 02/11] Kconfig: Add default SPL_FIT_GENERATOR for rockchip
Date: Wed, 8 May 2019 00:06:18 +0530 [thread overview]
Message-ID: <20190507183625.5983-3-jagan@amarulasolutions.com> (raw)
In-Reply-To: <20190507183625.5983-1-jagan@amarulasolutions.com>
Add default SPL_FIT_GENERATOR py script for rockchip platforms if
specific target enabled SPL_LOAD_FIT.
So, this would help get rid of explicitly mentioning the default
SPL FIT generator in defconfigs. however some targets, like puma_rk3399
still require their own FIT generator so in those cases the default will
override with defconfig defined generator.
Reviewed-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
---
Kconfig | 1 +
configs/chromebook_bob_defconfig | 1 -
configs/evb-rk3399_defconfig | 1 -
configs/ficus-rk3399_defconfig | 1 -
configs/firefly-rk3399_defconfig | 1 -
configs/orangepi-rk3399_defconfig | 1 -
configs/rock960-rk3399_defconfig | 1 -
7 files changed, 1 insertion(+), 6 deletions(-)
diff --git a/Kconfig b/Kconfig
index 7a5491bd67..91c1082ace 100644
--- a/Kconfig
+++ b/Kconfig
@@ -435,6 +435,7 @@ config SPL_FIT_GENERATOR
string ".its file generator script for U-Boot FIT image"
depends on SPL_FIT
default "board/sunxi/mksunxi_fit_atf.sh" if SPL_LOAD_FIT && ARCH_SUNXI
+ default "arch/arm/mach-rockchip/make_fit_atf.py" if SPL_LOAD_FIT && ARCH_ROCKCHIP
help
Specifies a (platform specific) script file to generate the FIT
source file used to build the U-Boot FIT image file. This gets
diff --git a/configs/chromebook_bob_defconfig b/configs/chromebook_bob_defconfig
index ce07a7f0ff..bd836acad5 100644
--- a/configs/chromebook_bob_defconfig
+++ b/configs/chromebook_bob_defconfig
@@ -19,7 +19,6 @@ CONFIG_SPL_SPI_SUPPORT=y
CONFIG_DEBUG_UART=y
CONFIG_FIT=y
CONFIG_SPL_LOAD_FIT=y
-CONFIG_SPL_FIT_GENERATOR="arch/arm/mach-rockchip/make_fit_atf.py"
CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399-gru-bob.dtb"
# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_DISPLAY_BOARDINFO_LATE=y
diff --git a/configs/evb-rk3399_defconfig b/configs/evb-rk3399_defconfig
index 5bb910e8d4..94963e4280 100644
--- a/configs/evb-rk3399_defconfig
+++ b/configs/evb-rk3399_defconfig
@@ -13,7 +13,6 @@ CONFIG_DEBUG_UART_CLOCK=24000000
CONFIG_DEBUG_UART=y
CONFIG_FIT=y
CONFIG_SPL_LOAD_FIT=y
-CONFIG_SPL_FIT_GENERATOR="arch/arm/mach-rockchip/make_fit_atf.py"
CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399-evb.dtb"
# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_DISPLAY_BOARDINFO_LATE=y
diff --git a/configs/ficus-rk3399_defconfig b/configs/ficus-rk3399_defconfig
index 79da86b32f..926d244fbe 100644
--- a/configs/ficus-rk3399_defconfig
+++ b/configs/ficus-rk3399_defconfig
@@ -13,7 +13,6 @@ CONFIG_DEBUG_UART_CLOCK=24000000
CONFIG_DEBUG_UART=y
CONFIG_FIT=y
CONFIG_SPL_LOAD_FIT=y
-CONFIG_SPL_FIT_GENERATOR="arch/arm/mach-rockchip/make_fit_atf.py"
# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_DISPLAY_BOARDINFO_LATE=y
CONFIG_SPL_TEXT_BASE=0xff8c2000
diff --git a/configs/firefly-rk3399_defconfig b/configs/firefly-rk3399_defconfig
index 301b27e3a4..5016fb8993 100644
--- a/configs/firefly-rk3399_defconfig
+++ b/configs/firefly-rk3399_defconfig
@@ -13,7 +13,6 @@ CONFIG_DEBUG_UART_CLOCK=24000000
CONFIG_DEBUG_UART=y
CONFIG_FIT=y
CONFIG_SPL_LOAD_FIT=y
-CONFIG_SPL_FIT_GENERATOR="arch/arm/mach-rockchip/make_fit_atf.py"
CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399-firefly.dtb"
# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_DISPLAY_BOARDINFO_LATE=y
diff --git a/configs/orangepi-rk3399_defconfig b/configs/orangepi-rk3399_defconfig
index ba13976cc6..22ddd8dce3 100644
--- a/configs/orangepi-rk3399_defconfig
+++ b/configs/orangepi-rk3399_defconfig
@@ -13,7 +13,6 @@ CONFIG_DEBUG_UART=y
CONFIG_NR_DRAM_BANKS=1
CONFIG_FIT=y
CONFIG_SPL_LOAD_FIT=y
-CONFIG_SPL_FIT_GENERATOR="arch/arm/mach-rockchip/make_fit_atf.py"
CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399-orangepi.dtb"
# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_DISPLAY_BOARDINFO_LATE=y
diff --git a/configs/rock960-rk3399_defconfig b/configs/rock960-rk3399_defconfig
index 8d490be18c..48d14ef7d8 100644
--- a/configs/rock960-rk3399_defconfig
+++ b/configs/rock960-rk3399_defconfig
@@ -13,7 +13,6 @@ CONFIG_DEBUG_UART_CLOCK=24000000
CONFIG_DEBUG_UART=y
CONFIG_FIT=y
CONFIG_SPL_LOAD_FIT=y
-CONFIG_SPL_FIT_GENERATOR="arch/arm/mach-rockchip/make_fit_atf.py"
CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399-rock960.dtb"
# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_DISPLAY_BOARDINFO_LATE=y
--
2.18.0.321.gffc6fa0e3
next prev parent reply other threads:[~2019-05-07 18:36 UTC|newest]
Thread overview: 36+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-05-07 18:36 [PATCH v7 00/11] rockchip: Add new rk3399 boards Jagan Teki
2019-05-07 18:36 ` [U-Boot] " Jagan Teki
[not found] ` <20190507183625.5983-1-jagan-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org>
2019-05-07 18:36 ` [PATCH v7 01/11] rockchip: dts: rk3399: Sync pwm2_pin_pull_down from Linux 5.1-rc2 Jagan Teki
2019-05-07 18:36 ` [U-Boot] " Jagan Teki
[not found] ` <20190507183625.5983-2-jagan-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org>
2019-05-08 3:46 ` Kever Yang
2019-05-08 3:46 ` [U-Boot] " Kever Yang
2019-05-07 18:36 ` Jagan Teki [this message]
2019-05-07 18:36 ` [U-Boot] [PATCH v7 02/11] Kconfig: Add default SPL_FIT_GENERATOR for rockchip Jagan Teki
[not found] ` <20190507183625.5983-3-jagan-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org>
2019-05-08 3:46 ` Kever Yang
2019-05-08 3:46 ` [U-Boot] " Kever Yang
2019-05-07 18:36 ` [PATCH v7 03/11] arm: rockchip: rk3399: Move common configs in Kconfig Jagan Teki
2019-05-07 18:36 ` [U-Boot] " Jagan Teki
[not found] ` <20190507183625.5983-4-jagan-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org>
2019-05-08 3:47 ` Kever Yang
2019-05-08 3:47 ` [U-Boot] " Kever Yang
2019-05-07 18:36 ` [PATCH v7 04/11] rockchip: dts: rk3399: Sync rk3399-nanopi4.dtsi from Linux Jagan Teki
2019-05-07 18:36 ` [U-Boot] " Jagan Teki
[not found] ` <20190507183625.5983-5-jagan-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org>
2019-05-08 3:47 ` Kever Yang
2019-05-08 3:47 ` [U-Boot] " Kever Yang
2019-05-07 18:36 ` [PATCH v7 05/11] rockchip: dts: rk3399: nanopi4: Use CD pin as RK_FUNC_1 Jagan Teki
2019-05-07 18:36 ` [U-Boot] " Jagan Teki
[not found] ` <20190507183625.5983-6-jagan-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org>
2019-05-08 3:47 ` Kever Yang
2019-05-08 3:47 ` [U-Boot] " Kever Yang
2019-05-07 18:36 ` [PATCH v7 06/11] rockchip: rk3399: Add Nanopi M4 board support Jagan Teki
2019-05-07 18:36 ` [U-Boot] " Jagan Teki
2019-05-07 18:36 ` [PATCH v7 07/11] rockchip: rk3399: Add Nanopc T4 " Jagan Teki
2019-05-07 18:36 ` [U-Boot] " Jagan Teki
[not found] ` <20190507183625.5983-8-jagan-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org>
2019-05-08 3:48 ` Kever Yang
2019-05-08 3:48 ` [U-Boot] " Kever Yang
2019-05-07 18:36 ` [PATCH v7 08/11] rockchip: rk3399: Add Nanopi NEO4 " Jagan Teki
2019-05-07 18:36 ` [U-Boot] " Jagan Teki
[not found] ` <20190507183625.5983-9-jagan-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org>
2019-05-08 3:48 ` Kever Yang
2019-05-08 3:48 ` [U-Boot] " Kever Yang
2019-05-07 18:36 ` [PATCH v7 09/11] rockchip: rk3399: Add Rockpro64 " Jagan Teki
2019-05-07 18:36 ` [U-Boot] " Jagan Teki
[not found] ` <20190507183625.5983-10-jagan-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org>
2019-05-08 3:48 ` Kever Yang
2019-05-08 3:48 ` [U-Boot] " Kever Yang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190507183625.5983-3-jagan@amarulasolutions.com \
--to=jagan-dyjbcgdgk7pe9whmmfpqlfatqe2ktcn/@public.gmane.org \
--cc=akash-oRp2ZoJdM/RWk0Htik3J/w@public.gmane.org \
--cc=kever.yang-TNX95d0MmH7DzftRWevZcw@public.gmane.org \
--cc=linux-amarula-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org \
--cc=linux-rockchip-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
--cc=paul.kocialkowski-LDxbnhwyfcJBDgjK7y7TUQ@public.gmane.org \
--cc=philipp.tomsich-SN7IsUiht6C/RdPyistoZJqQE7yCjDx5@public.gmane.org \
--cc=sjg-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org \
--cc=u-boot-0aAXYlwwYIKGBzrmiIFOJg@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.