All of lore.kernel.org
 help / color / mirror / Atom feed
From: Kever Yang <kever.yang-TNX95d0MmH7DzftRWevZcw@public.gmane.org>
To: Jagan Teki
	<jagan-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org>,
	Simon Glass <sjg-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org>,
	Philipp Tomsich
	<philipp.tomsich-SN7IsUiht6C/RdPyistoZJqQE7yCjDx5@public.gmane.org>,
	Akash Gajjar <akash-oRp2ZoJdM/RWk0Htik3J/w@public.gmane.org>
Cc: Paul Kocialkowski
	<paul.kocialkowski-LDxbnhwyfcJBDgjK7y7TUQ@public.gmane.org>,
	linux-rockchip-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
	linux-amarula-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org,
	u-boot-0aAXYlwwYIKGBzrmiIFOJg@public.gmane.org
Subject: Re: [PATCH v7 05/11] rockchip: dts: rk3399: nanopi4: Use CD pin as RK_FUNC_1
Date: Wed, 8 May 2019 11:47:45 +0800	[thread overview]
Message-ID: <7624b775-43a7-0afa-8747-4ea70214085f@rock-chips.com> (raw)
In-Reply-To: <20190507183625.5983-6-jagan-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org>



On 05/08/2019 02:36 AM, Jagan Teki wrote:
> sdmmc cd pin is configured as RK_FUNC_GPIO which is wrong and
> indeed failed to detect the sdcard on the board with below error
>
>   Card did not respond to voltage select!
>
> So, fix it by replacing RK_FUNC_GPIO with RK_FUNC_1 which
> is already defined in rk3399.dts so make use of same like
> other boards.
>
> Add these changes in -u-boot.dtsi to make Linux sync easy for future
> changes.
>
> Signed-off-by: Jagan Teki <jagan-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org>

Reviewed-by: Kever Yang <kever.yang-TNX95d0MmH7DzftRWevZcw@public.gmane.org>

Thanks,
- Kever
> ---
>  arch/arm/dts/rk3399-nanopi4-u-boot.dtsi | 9 +++++++++
>  1 file changed, 9 insertions(+)
>  create mode 100644 arch/arm/dts/rk3399-nanopi4-u-boot.dtsi
>
> diff --git a/arch/arm/dts/rk3399-nanopi4-u-boot.dtsi b/arch/arm/dts/rk3399-nanopi4-u-boot.dtsi
> new file mode 100644
> index 0000000000..20db99c0b8
> --- /dev/null
> +++ b/arch/arm/dts/rk3399-nanopi4-u-boot.dtsi
> @@ -0,0 +1,9 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * Copyright (C) 2019 Jagan Teki <jagan-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org>
> + */
> +
> +&sdmmc {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&sdmmc_bus4 &sdmmc_clk &sdmmc_cmd &sdmmc_cd>;
> +};

WARNING: multiple messages have this Message-ID (diff)
From: Kever Yang <kever.yang@rock-chips.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v7 05/11] rockchip: dts: rk3399: nanopi4: Use CD pin as RK_FUNC_1
Date: Wed, 8 May 2019 11:47:45 +0800	[thread overview]
Message-ID: <7624b775-43a7-0afa-8747-4ea70214085f@rock-chips.com> (raw)
In-Reply-To: <20190507183625.5983-6-jagan@amarulasolutions.com>



On 05/08/2019 02:36 AM, Jagan Teki wrote:
> sdmmc cd pin is configured as RK_FUNC_GPIO which is wrong and
> indeed failed to detect the sdcard on the board with below error
>
>   Card did not respond to voltage select!
>
> So, fix it by replacing RK_FUNC_GPIO with RK_FUNC_1 which
> is already defined in rk3399.dts so make use of same like
> other boards.
>
> Add these changes in -u-boot.dtsi to make Linux sync easy for future
> changes.
>
> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>

Reviewed-by: Kever Yang <kever.yang@rock-chips.com>

Thanks,
- Kever
> ---
>  arch/arm/dts/rk3399-nanopi4-u-boot.dtsi | 9 +++++++++
>  1 file changed, 9 insertions(+)
>  create mode 100644 arch/arm/dts/rk3399-nanopi4-u-boot.dtsi
>
> diff --git a/arch/arm/dts/rk3399-nanopi4-u-boot.dtsi b/arch/arm/dts/rk3399-nanopi4-u-boot.dtsi
> new file mode 100644
> index 0000000000..20db99c0b8
> --- /dev/null
> +++ b/arch/arm/dts/rk3399-nanopi4-u-boot.dtsi
> @@ -0,0 +1,9 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * Copyright (C) 2019 Jagan Teki <jagan@amarulasolutions.com>
> + */
> +
> +&sdmmc {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&sdmmc_bus4 &sdmmc_clk &sdmmc_cmd &sdmmc_cd>;
> +};

  parent reply	other threads:[~2019-05-08  3:47 UTC|newest]

Thread overview: 36+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-05-07 18:36 [PATCH v7 00/11] rockchip: Add new rk3399 boards Jagan Teki
2019-05-07 18:36 ` [U-Boot] " Jagan Teki
     [not found] ` <20190507183625.5983-1-jagan-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org>
2019-05-07 18:36   ` [PATCH v7 01/11] rockchip: dts: rk3399: Sync pwm2_pin_pull_down from Linux 5.1-rc2 Jagan Teki
2019-05-07 18:36     ` [U-Boot] " Jagan Teki
     [not found]     ` <20190507183625.5983-2-jagan-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org>
2019-05-08  3:46       ` Kever Yang
2019-05-08  3:46         ` [U-Boot] " Kever Yang
2019-05-07 18:36   ` [PATCH v7 02/11] Kconfig: Add default SPL_FIT_GENERATOR for rockchip Jagan Teki
2019-05-07 18:36     ` [U-Boot] " Jagan Teki
     [not found]     ` <20190507183625.5983-3-jagan-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org>
2019-05-08  3:46       ` Kever Yang
2019-05-08  3:46         ` [U-Boot] " Kever Yang
2019-05-07 18:36   ` [PATCH v7 03/11] arm: rockchip: rk3399: Move common configs in Kconfig Jagan Teki
2019-05-07 18:36     ` [U-Boot] " Jagan Teki
     [not found]     ` <20190507183625.5983-4-jagan-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org>
2019-05-08  3:47       ` Kever Yang
2019-05-08  3:47         ` [U-Boot] " Kever Yang
2019-05-07 18:36   ` [PATCH v7 04/11] rockchip: dts: rk3399: Sync rk3399-nanopi4.dtsi from Linux Jagan Teki
2019-05-07 18:36     ` [U-Boot] " Jagan Teki
     [not found]     ` <20190507183625.5983-5-jagan-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org>
2019-05-08  3:47       ` Kever Yang
2019-05-08  3:47         ` [U-Boot] " Kever Yang
2019-05-07 18:36   ` [PATCH v7 05/11] rockchip: dts: rk3399: nanopi4: Use CD pin as RK_FUNC_1 Jagan Teki
2019-05-07 18:36     ` [U-Boot] " Jagan Teki
     [not found]     ` <20190507183625.5983-6-jagan-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org>
2019-05-08  3:47       ` Kever Yang [this message]
2019-05-08  3:47         ` Kever Yang
2019-05-07 18:36   ` [PATCH v7 06/11] rockchip: rk3399: Add Nanopi M4 board support Jagan Teki
2019-05-07 18:36     ` [U-Boot] " Jagan Teki
2019-05-07 18:36   ` [PATCH v7 07/11] rockchip: rk3399: Add Nanopc T4 " Jagan Teki
2019-05-07 18:36     ` [U-Boot] " Jagan Teki
     [not found]     ` <20190507183625.5983-8-jagan-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org>
2019-05-08  3:48       ` Kever Yang
2019-05-08  3:48         ` [U-Boot] " Kever Yang
2019-05-07 18:36   ` [PATCH v7 08/11] rockchip: rk3399: Add Nanopi NEO4 " Jagan Teki
2019-05-07 18:36     ` [U-Boot] " Jagan Teki
     [not found]     ` <20190507183625.5983-9-jagan-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org>
2019-05-08  3:48       ` Kever Yang
2019-05-08  3:48         ` [U-Boot] " Kever Yang
2019-05-07 18:36   ` [PATCH v7 09/11] rockchip: rk3399: Add Rockpro64 " Jagan Teki
2019-05-07 18:36     ` [U-Boot] " Jagan Teki
     [not found]     ` <20190507183625.5983-10-jagan-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org>
2019-05-08  3:48       ` Kever Yang
2019-05-08  3:48         ` [U-Boot] " Kever Yang

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=7624b775-43a7-0afa-8747-4ea70214085f@rock-chips.com \
    --to=kever.yang-tnx95d0mmh7dzftrwevzcw@public.gmane.org \
    --cc=akash-oRp2ZoJdM/RWk0Htik3J/w@public.gmane.org \
    --cc=jagan-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org \
    --cc=linux-amarula-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org \
    --cc=linux-rockchip-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
    --cc=paul.kocialkowski-LDxbnhwyfcJBDgjK7y7TUQ@public.gmane.org \
    --cc=philipp.tomsich-SN7IsUiht6C/RdPyistoZJqQE7yCjDx5@public.gmane.org \
    --cc=sjg-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org \
    --cc=u-boot-0aAXYlwwYIKGBzrmiIFOJg@public.gmane.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.