From: Torsten Duwe <duwe@lst.de> To: Maxime Ripard <maxime.ripard@bootlin.com>, Chen-Yu Tsai <wens@csie.org>, Rob Herring <robh+dt@kernel.org>, Mark Rutland <mark.rutland@arm.com>, Thierry Reding <thierry.reding@gmail.com>, David Airlie <airlied@linux.ie>, Daniel Vetter <daniel@ffwll.ch>, Andrzej Hajda <a.hajda@samsung.com>, Laurent Pinchart <Laurent.pinchart@ideasonboard.com>, Icenowy Zheng <icenowy@aosc.io>, Sean Paul <seanpaul@chromium.org>, Vasily Khoruzhick <anarsoul@gmail.com>, Harald Geyer <harald@ccbib.org>, Greg Kroah-Hartman <gregkh@linuxfoundation.org>, Thomas Gleixner <tglx@linutronix.de> Cc: dri-devel@lists.freedesktop.org, devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org Subject: [PATCH 5/6] dt-bindings: Add ANX6345 DP/eDP transmitter binding Date: Thu, 23 May 2019 08:54:00 +0200 (CEST) [thread overview] Message-ID: <20190523065400.BD9EB68B05@newverein.lst.de> (raw) In-Reply-To: 20190523065013.2719D68B05@newverein.lst.de From: Icenowy Zheng <icenowy@aosc.io> The anx6345 is an ultra-low power DisplayPort/eDP transmitter designed for portable devices. Add a binding document for it. Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Torsten Duwe <duwe@suse.de> --- .../bindings/display/bridge/anx6345.txt | 56 +++++++++++++++++++ 1 file changed, 56 insertions(+) create mode 100644 Documentation/devicetree/bindings/display/bridge/anx6345.txt diff --git a/Documentation/devicetree/bindings/display/bridge/anx6345.txt b/Documentation/devicetree/bindings/display/bridge/anx6345.txt new file mode 100644 index 000000000000..e79a11348d11 --- /dev/null +++ b/Documentation/devicetree/bindings/display/bridge/anx6345.txt @@ -0,0 +1,56 @@ +Analogix ANX6345 eDP Transmitter +-------------------------------- + +The ANX6345 is an ultra-low power Full-HD eDP transmitter designed for +portable devices. + +Required properties: + + - compatible : "analogix,anx6345" + - reg : I2C address of the device + - reset-gpios : Which GPIO to use for reset + - dvdd12-supply : Regulator for 1.2V digital core power. + - dvdd25-supply : Regulator for 2.5V digital core power. + +Optional properties: + + - Video ports for RGB input and eDP output using the DT bindings + defined in [1] + +[1]: Documentation/devicetree/bindings/media/video-interfaces.txt + +Example: + +anx6345: anx6345@38 { + compatible = "analogix,anx6345"; + reg = <0x38>; + reset-gpios = <&pio 3 24 GPIO_ACTIVE_LOW>; /* PD24 */ + dvdd25-supply = <®_dldo2>; + dvdd12-supply = <®_fldo1>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + anx6345_in: port@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + anx6345_in_tcon0: endpoint@0 { + reg = <0>; + remote-endpoint = <&tcon0_out_anx6345>; + }; + }; + + anx6345_out: port@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + anx6345_out_panel: endpoint@0 { + reg = <0>; + remote-endpoint = <&panel_in_edp>; + }; + }; + }; +};
WARNING: multiple messages have this Message-ID (diff)
From: Torsten Duwe <duwe@lst.de> To: Maxime Ripard <maxime.ripard@bootlin.com>, Chen-Yu Tsai <wens@csie.org>, Rob Herring <robh+dt@kernel.org>, Mark Rutland <mark.rutland@arm.com>, Thierry Reding <thierry.reding@gmail.com>, David Airlie <airlied@linux.ie>, Daniel Vetter <daniel@ffwll.ch>, Andrzej Hajda <a.hajda@samsung.com>, Laurent Pinchart <Laurent.pinchart@ideasonboard.com>, Icenowy Zheng <icenowy@aosc.io>, Sean Paul <seanpaul@chromium.org>, Vasily Khoruzhick <anarsoul@gmail.com>, Harald Geyer <harald@ccbib.org>, Greg Kroah-Hartman <gregkh@linuxfoundation.org>, Thomas Gleixner <tglx@linutronix.de> Cc: devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, dri-devel@lists.freedesktop.org, linux-kernel@vger.kernel.org Subject: [PATCH 5/6] dt-bindings: Add ANX6345 DP/eDP transmitter binding Date: Thu, 23 May 2019 08:54:00 +0200 (CEST) [thread overview] Message-ID: <20190523065400.BD9EB68B05@newverein.lst.de> (raw) In-Reply-To: 20190523065013.2719D68B05@newverein.lst.de From: Icenowy Zheng <icenowy@aosc.io> The anx6345 is an ultra-low power DisplayPort/eDP transmitter designed for portable devices. Add a binding document for it. Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Torsten Duwe <duwe@suse.de> --- .../bindings/display/bridge/anx6345.txt | 56 +++++++++++++++++++ 1 file changed, 56 insertions(+) create mode 100644 Documentation/devicetree/bindings/display/bridge/anx6345.txt diff --git a/Documentation/devicetree/bindings/display/bridge/anx6345.txt b/Documentation/devicetree/bindings/display/bridge/anx6345.txt new file mode 100644 index 000000000000..e79a11348d11 --- /dev/null +++ b/Documentation/devicetree/bindings/display/bridge/anx6345.txt @@ -0,0 +1,56 @@ +Analogix ANX6345 eDP Transmitter +-------------------------------- + +The ANX6345 is an ultra-low power Full-HD eDP transmitter designed for +portable devices. + +Required properties: + + - compatible : "analogix,anx6345" + - reg : I2C address of the device + - reset-gpios : Which GPIO to use for reset + - dvdd12-supply : Regulator for 1.2V digital core power. + - dvdd25-supply : Regulator for 2.5V digital core power. + +Optional properties: + + - Video ports for RGB input and eDP output using the DT bindings + defined in [1] + +[1]: Documentation/devicetree/bindings/media/video-interfaces.txt + +Example: + +anx6345: anx6345@38 { + compatible = "analogix,anx6345"; + reg = <0x38>; + reset-gpios = <&pio 3 24 GPIO_ACTIVE_LOW>; /* PD24 */ + dvdd25-supply = <®_dldo2>; + dvdd12-supply = <®_fldo1>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + anx6345_in: port@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + anx6345_in_tcon0: endpoint@0 { + reg = <0>; + remote-endpoint = <&tcon0_out_anx6345>; + }; + }; + + anx6345_out: port@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + anx6345_out_panel: endpoint@0 { + reg = <0>; + remote-endpoint = <&panel_in_edp>; + }; + }; + }; +}; _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2019-05-23 6:54 UTC|newest] Thread overview: 40+ messages / expand[flat|nested] mbox.gz Atom feed top 2019-05-23 6:50 [PATCH 0/6] Add anx6345 DP/eDP bridge for Olimex Teres-I Torsten Duwe 2019-05-23 6:50 ` Torsten Duwe 2019-05-23 6:53 ` [PATCH 1/6] drm/bridge: move ANA78xx driver to analogix subdirectory Torsten Duwe 2019-05-23 6:53 ` Torsten Duwe 2019-05-23 6:53 ` [PATCH 2/6] drm/bridge: split some definitions of ANX78xx to dedicated headers Torsten Duwe 2019-05-23 6:53 ` Torsten Duwe 2019-05-23 6:53 ` [PATCH 3/6] drm/bridge: extract some Analogix I2C DP common code Torsten Duwe 2019-05-23 6:53 ` Torsten Duwe 2019-05-23 7:40 ` Chen-Yu Tsai 2019-05-23 7:40 ` Chen-Yu Tsai 2019-05-23 7:50 ` Laurent Pinchart 2019-05-23 7:50 ` Laurent Pinchart 2019-05-23 11:52 ` Torsten Duwe 2019-05-23 11:52 ` Torsten Duwe 2019-05-23 7:54 ` Laurent Pinchart 2019-05-23 7:54 ` Laurent Pinchart 2019-05-27 20:11 ` Sam Ravnborg 2019-05-27 20:11 ` Sam Ravnborg 2019-05-23 6:53 ` [PATCH 4/6] drm/bridge: Add Analogix anx6345 support Torsten Duwe 2019-05-23 6:53 ` Torsten Duwe 2019-05-23 7:50 ` Laurent Pinchart 2019-05-23 7:50 ` Laurent Pinchart 2019-05-23 12:45 ` Torsten Duwe 2019-05-23 12:45 ` Torsten Duwe 2019-05-23 6:54 ` Torsten Duwe [this message] 2019-05-23 6:54 ` [PATCH 5/6] dt-bindings: Add ANX6345 DP/eDP transmitter binding Torsten Duwe 2019-05-23 7:31 ` Laurent Pinchart 2019-05-23 7:31 ` Laurent Pinchart 2019-05-23 9:05 ` Maxime Ripard 2019-05-23 9:05 ` Maxime Ripard 2019-05-23 12:30 ` Torsten Duwe 2019-05-23 12:30 ` Torsten Duwe 2019-05-23 6:54 ` [PATCH 6/6] arm64: dts: allwinner: a64: enable ANX6345 bridge on Teres-I Torsten Duwe 2019-05-23 6:54 ` Torsten Duwe 2019-05-23 14:48 ` Vasily Khoruzhick 2019-05-23 14:48 ` Vasily Khoruzhick 2019-05-24 12:13 ` Torsten Duwe 2019-05-24 12:13 ` Torsten Duwe 2019-05-24 13:06 ` Maxime Ripard 2019-05-24 13:06 ` Maxime Ripard
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20190523065400.BD9EB68B05@newverein.lst.de \ --to=duwe@lst.de \ --cc=Laurent.pinchart@ideasonboard.com \ --cc=a.hajda@samsung.com \ --cc=airlied@linux.ie \ --cc=anarsoul@gmail.com \ --cc=daniel@ffwll.ch \ --cc=devicetree@vger.kernel.org \ --cc=dri-devel@lists.freedesktop.org \ --cc=gregkh@linuxfoundation.org \ --cc=harald@ccbib.org \ --cc=icenowy@aosc.io \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-kernel@vger.kernel.org \ --cc=mark.rutland@arm.com \ --cc=maxime.ripard@bootlin.com \ --cc=robh+dt@kernel.org \ --cc=seanpaul@chromium.org \ --cc=tglx@linutronix.de \ --cc=thierry.reding@gmail.com \ --cc=wens@csie.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.