From: Sam Ravnborg <sam@ravnborg.org> To: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Cc: devicetree@vger.kernel.org, Jacopo Mondi <jacopo@jmondi.org>, Kieran Bingham <kieran.bingham@ideasonboard.com>, dri-devel@lists.freedesktop.org, linux-renesas-soc@vger.kernel.org, Jacopo Mondi <jacopo+renesas@jmondi.org> Subject: Re: [PATCH v3 04/10] dt-bindings: display: renesas: lvds: Add renesas, companion property Date: Tue, 28 May 2019 18:37:30 +0200 [thread overview] Message-ID: <20190528163730.GA9610@ravnborg.org> (raw) In-Reply-To: <20190528141234.15425-5-laurent.pinchart+renesas@ideasonboard.com> Hi Laurent. Reading through this nice series. On Tue, May 28, 2019 at 05:12:28PM +0300, Laurent Pinchart wrote: > Add a new optional renesas,companion property to point to the companion > LVDS encoder. This is used to support dual-link operation where the main > LVDS encoder splits even-numbered and odd-numbered pixels between the > two LVDS encoders. > > The new property doesn't control the mode of operation, it only > describes the relationship between the master and companion LVDS > encoders. > > Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> > Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> > Tested-by: Jacopo Mondi <jacopo+renesas@jmondi.org> > --- > Changes since v2: > > - Clarify when the companion property is required or not allowed > > Changes since v1: > > - Fixed typo > --- > .../devicetree/bindings/display/bridge/renesas,lvds.txt | 7 +++++++ > 1 file changed, 7 insertions(+) > > diff --git a/Documentation/devicetree/bindings/display/bridge/renesas,lvds.txt b/Documentation/devicetree/bindings/display/bridge/renesas,lvds.txt > index 900a884ad9f5..2d24bd8cbec5 100644 > --- a/Documentation/devicetree/bindings/display/bridge/renesas,lvds.txt > +++ b/Documentation/devicetree/bindings/display/bridge/renesas,lvds.txt > @@ -45,6 +45,13 @@ OF graph bindings specified in Documentation/devicetree/bindings/graph.txt. > > Each port shall have a single endpoint. > > +Optional properties: > + > +- renesas,companion : phandle to the companion LVDS encoder. This property is > + mandatory for the first LVDS encoder on D3 and E3 SoCs, and shall point to > + the second encoder to be used as a companion in dual-link mode. It shall not > + be set for any other LVDS encoder. If the D3 and E3 socs do not mandate the use of dual-link, then what to do in the DT? Because according to the above this property must be specified for D3 and E3 SOC's. > + > > Example: Always good with examples, maybe it comes later. Sam _______________________________________________ dri-devel mailing list dri-devel@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/dri-devel
WARNING: multiple messages have this Message-ID (diff)
From: Sam Ravnborg <sam@ravnborg.org> To: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Cc: dri-devel@lists.freedesktop.org, linux-renesas-soc@vger.kernel.org, devicetree@vger.kernel.org, Jacopo Mondi <jacopo@jmondi.org>, Jacopo Mondi <jacopo+renesas@jmondi.org>, Kieran Bingham <kieran.bingham@ideasonboard.com> Subject: Re: [PATCH v3 04/10] dt-bindings: display: renesas: lvds: Add renesas, companion property Date: Tue, 28 May 2019 18:37:30 +0200 [thread overview] Message-ID: <20190528163730.GA9610@ravnborg.org> (raw) In-Reply-To: <20190528141234.15425-5-laurent.pinchart+renesas@ideasonboard.com> Hi Laurent. Reading through this nice series. On Tue, May 28, 2019 at 05:12:28PM +0300, Laurent Pinchart wrote: > Add a new optional renesas,companion property to point to the companion > LVDS encoder. This is used to support dual-link operation where the main > LVDS encoder splits even-numbered and odd-numbered pixels between the > two LVDS encoders. > > The new property doesn't control the mode of operation, it only > describes the relationship between the master and companion LVDS > encoders. > > Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> > Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> > Tested-by: Jacopo Mondi <jacopo+renesas@jmondi.org> > --- > Changes since v2: > > - Clarify when the companion property is required or not allowed > > Changes since v1: > > - Fixed typo > --- > .../devicetree/bindings/display/bridge/renesas,lvds.txt | 7 +++++++ > 1 file changed, 7 insertions(+) > > diff --git a/Documentation/devicetree/bindings/display/bridge/renesas,lvds.txt b/Documentation/devicetree/bindings/display/bridge/renesas,lvds.txt > index 900a884ad9f5..2d24bd8cbec5 100644 > --- a/Documentation/devicetree/bindings/display/bridge/renesas,lvds.txt > +++ b/Documentation/devicetree/bindings/display/bridge/renesas,lvds.txt > @@ -45,6 +45,13 @@ OF graph bindings specified in Documentation/devicetree/bindings/graph.txt. > > Each port shall have a single endpoint. > > +Optional properties: > + > +- renesas,companion : phandle to the companion LVDS encoder. This property is > + mandatory for the first LVDS encoder on D3 and E3 SoCs, and shall point to > + the second encoder to be used as a companion in dual-link mode. It shall not > + be set for any other LVDS encoder. If the D3 and E3 socs do not mandate the use of dual-link, then what to do in the DT? Because according to the above this property must be specified for D3 and E3 SOC's. > + > > Example: Always good with examples, maybe it comes later. Sam
next prev parent reply other threads:[~2019-05-28 16:37 UTC|newest] Thread overview: 86+ messages / expand[flat|nested] mbox.gz Atom feed top 2019-05-28 14:12 [PATCH v3 00/10] R-Car DU: LVDS dual-link mode support Laurent Pinchart 2019-05-28 14:12 ` Laurent Pinchart 2019-05-28 14:12 ` [PATCH v3 01/10] drm: bridge: Add dual_link field to the drm_bridge_timings structure Laurent Pinchart 2019-05-28 14:12 ` Laurent Pinchart 2019-07-30 12:12 ` Neil Armstrong 2019-07-30 12:12 ` Neil Armstrong 2019-05-28 14:12 ` [PATCH v3 02/10] dt-bindings: display: bridge: thc63lvd1024: Document dual-link operation Laurent Pinchart 2019-05-28 14:12 ` Laurent Pinchart 2019-06-07 22:15 ` Kieran Bingham 2019-06-07 22:15 ` Kieran Bingham 2019-06-07 22:30 ` Laurent Pinchart 2019-06-07 22:30 ` Laurent Pinchart 2019-06-07 22:36 ` Kieran Bingham 2019-06-07 22:36 ` Kieran Bingham 2019-05-28 14:12 ` [PATCH v3 03/10] drm: bridge: thc63: Report input bus mode through bridge timings Laurent Pinchart 2019-05-28 14:12 ` Laurent Pinchart 2019-06-07 22:51 ` Kieran Bingham 2019-06-07 22:51 ` Kieran Bingham 2019-07-30 12:13 ` Neil Armstrong 2019-07-30 12:13 ` Neil Armstrong 2019-05-28 14:12 ` [PATCH v3 04/10] dt-bindings: display: renesas: lvds: Add renesas, companion property Laurent Pinchart 2019-05-28 14:12 ` [PATCH v3 04/10] dt-bindings: display: renesas: lvds: Add renesas,companion property Laurent Pinchart 2019-05-28 16:37 ` Sam Ravnborg [this message] 2019-05-28 16:37 ` [PATCH v3 04/10] dt-bindings: display: renesas: lvds: Add renesas, companion property Sam Ravnborg 2019-05-28 16:49 ` Laurent Pinchart 2019-05-28 16:49 ` Laurent Pinchart 2019-05-28 16:59 ` Sam Ravnborg 2019-05-28 16:59 ` Sam Ravnborg 2019-06-06 7:54 ` Laurent Pinchart 2019-06-06 7:54 ` Laurent Pinchart 2019-06-06 9:27 ` Sam Ravnborg 2019-06-06 9:27 ` Sam Ravnborg 2019-06-07 22:33 ` [PATCH v3 04/10] dt-bindings: display: renesas: lvds: Add renesas,companion property Kieran Bingham 2019-06-07 22:33 ` Kieran Bingham 2019-05-28 14:12 ` [PATCH v3 05/10] drm: rcar-du: lvds: Remove LVDS double-enable checks Laurent Pinchart 2019-05-28 14:12 ` Laurent Pinchart 2019-06-07 22:09 ` Kieran Bingham 2019-06-07 22:09 ` Kieran Bingham 2019-05-28 14:12 ` [PATCH v3 06/10] drm: rcar-du: lvds: Add support for dual-link mode Laurent Pinchart 2019-05-28 14:12 ` Laurent Pinchart 2019-06-07 23:11 ` Kieran Bingham 2019-06-07 23:11 ` Kieran Bingham 2019-05-28 14:12 ` [PATCH v3 07/10] drm: rcar-du: Skip LVDS1 output on Gen3 when using dual-link LVDS mode Laurent Pinchart 2019-05-28 14:12 ` Laurent Pinchart 2019-05-28 16:42 ` Sam Ravnborg 2019-05-28 16:42 ` Sam Ravnborg 2019-05-28 16:50 ` Laurent Pinchart 2019-05-28 16:50 ` Laurent Pinchart 2019-05-28 17:02 ` Sam Ravnborg 2019-05-28 17:02 ` Sam Ravnborg 2019-06-06 7:57 ` Laurent Pinchart 2019-06-06 7:57 ` Laurent Pinchart 2019-06-06 9:29 ` Sam Ravnborg 2019-06-06 9:29 ` Sam Ravnborg 2019-06-07 23:19 ` Kieran Bingham 2019-06-07 23:19 ` Kieran Bingham 2019-05-28 14:12 ` [PATCH v3 08/10] arm64: dts: renesas: r8a7799[05]: Point LVDS0 to its companion LVDS1 Laurent Pinchart 2019-05-28 14:12 ` Laurent Pinchart 2019-06-03 11:40 ` Simon Horman 2019-06-03 11:40 ` Simon Horman 2019-06-06 7:59 ` Laurent Pinchart 2019-06-06 7:59 ` Laurent Pinchart 2019-06-06 8:51 ` Simon Horman 2019-06-06 8:51 ` Simon Horman 2019-06-12 10:21 ` Laurent Pinchart 2019-06-12 10:21 ` Laurent Pinchart 2019-06-12 11:52 ` Simon Horman 2019-06-12 11:52 ` Simon Horman 2019-06-07 23:15 ` Kieran Bingham 2019-06-07 23:15 ` Kieran Bingham 2019-05-28 14:12 ` [PATCH v3 09/10] [HACK] arm64: dts: renesas: draak: Enable LVDS dual-link operation Laurent Pinchart 2019-05-28 14:12 ` Laurent Pinchart 2019-05-28 14:12 ` [PATCH v3 10/10] [HACK] arm64: dts: renesas: ebisu: " Laurent Pinchart 2019-05-28 14:12 ` Laurent Pinchart 2019-07-22 11:27 ` Fabrizio Castro 2019-07-22 11:27 ` Fabrizio Castro 2019-07-23 10:30 ` Jacopo Mondi 2019-07-23 10:30 ` Jacopo Mondi 2019-07-23 12:16 ` Fabrizio Castro 2019-07-23 12:16 ` Fabrizio Castro 2019-05-28 16:46 ` [PATCH v3 00/10] R-Car DU: LVDS dual-link mode support Sam Ravnborg 2019-05-28 16:46 ` Sam Ravnborg 2019-06-07 22:16 ` Kieran Bingham 2019-06-07 22:16 ` Kieran Bingham 2019-06-07 22:21 ` Laurent Pinchart 2019-06-07 22:21 ` Laurent Pinchart
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20190528163730.GA9610@ravnborg.org \ --to=sam@ravnborg.org \ --cc=devicetree@vger.kernel.org \ --cc=dri-devel@lists.freedesktop.org \ --cc=jacopo+renesas@jmondi.org \ --cc=jacopo@jmondi.org \ --cc=kieran.bingham@ideasonboard.com \ --cc=laurent.pinchart+renesas@ideasonboard.com \ --cc=linux-renesas-soc@vger.kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.