All of lore.kernel.org
 help / color / mirror / Atom feed
From: Keerthy <j-keerthy@ti.com>
To: <herbert@gondor.apana.org.au>, <davem@davemloft.net>,
	<robh+dt@kernel.org>
Cc: <linux-kernel@vger.kernel.org>,
	<linux-arm-kernel@lists.infradead.org>,
	<devicetree@vger.kernel.org>, <t-kristo@ti.com>,
	<j-keerthy@ti.com>, <nm@ti.com>
Subject: [PATCH 00/10] crypto: k3: Add sa2ul driver
Date: Tue, 18 Jun 2019 17:38:33 +0530	[thread overview]
Message-ID: <20190618120843.18777-1-j-keerthy@ti.com> (raw)

The series adds Crypto hardware accelerator support for SA2UL.
SA2UL stands for security accelerator ultra lite.

The Security Accelerator (SA2_UL) subsystem provides hardware
cryptographic acceleration for the following use cases:
• Encryption and authentication for secure boot
• Encryption and authentication of content in applications
  requiring DRM (digital rights management) and
  content/asset protection
The device includes one instantiation of SA2_UL named SA2_UL0

SA2UL needs on tx channel and a pair of rx dma channels.

This series has dependency on UDMA series. Hence is based on top of:

https://patchwork.kernel.org/project/linux-dmaengine/list/?series=114105

The above series adds couple of dmaengine APIs that are used
by the sa2ul driver. Hence there is a hard dependency on the
above series.

Keerthy (10):
  dt-bindings: crypto: k3: Add sa2ul bindings documentation
  crypto: sa2ul: Add crypto driver
  crypto: sa2ul: Add AES ECB Mode support
  crypto: sa2ul: Add aead support for hmac(sha1)cbc(aes) algorithm
  crypto: sha256_generic: Export the Transform function
  crypto: sa2ul: Add hmac(sha256)cbc(aes) AEAD Algo support
  crypto: sa2ul: Add hmac(sha1) HMAC algorithm support
  crypto: sa2ul: Add hmac(sha256) HMAC algorithm support
  sa2ul: Add 3DES ECB & CBC Mode support
  arm64: dts: k3-am6: Add crypto accelarator node

 .../devicetree/bindings/crypto/sa2ul.txt      |   47 +
 arch/arm64/boot/dts/ti/k3-am65-main.dtsi      |   33 +
 crypto/sha256_generic.c                       |    3 +-
 drivers/crypto/Kconfig                        |   17 +
 drivers/crypto/Makefile                       |    1 +
 drivers/crypto/sa2ul.c                        | 2232 +++++++++++++++++
 drivers/crypto/sa2ul.h                        |  384 +++
 include/crypto/sha.h                          |    1 +
 8 files changed, 2717 insertions(+), 1 deletion(-)
 create mode 100644 Documentation/devicetree/bindings/crypto/sa2ul.txt
 create mode 100644 drivers/crypto/sa2ul.c
 create mode 100644 drivers/crypto/sa2ul.h

-- 
2.17.1


WARNING: multiple messages have this Message-ID (diff)
From: Keerthy <j-keerthy@ti.com>
To: herbert@gondor.apana.org.au, davem@davemloft.net, robh+dt@kernel.org
Cc: linux-kernel@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org,
	t-kristo@ti.com, j-keerthy@ti.com, nm@ti.com
Subject: [PATCH 00/10] crypto: k3: Add sa2ul driver
Date: Tue, 18 Jun 2019 17:38:33 +0530	[thread overview]
Message-ID: <20190618120843.18777-1-j-keerthy@ti.com> (raw)

The series adds Crypto hardware accelerator support for SA2UL.
SA2UL stands for security accelerator ultra lite.

The Security Accelerator (SA2_UL) subsystem provides hardware
cryptographic acceleration for the following use cases:
• Encryption and authentication for secure boot
• Encryption and authentication of content in applications
  requiring DRM (digital rights management) and
  content/asset protection
The device includes one instantiation of SA2_UL named SA2_UL0

SA2UL needs on tx channel and a pair of rx dma channels.

This series has dependency on UDMA series. Hence is based on top of:

https://patchwork.kernel.org/project/linux-dmaengine/list/?series=114105

The above series adds couple of dmaengine APIs that are used
by the sa2ul driver. Hence there is a hard dependency on the
above series.

Keerthy (10):
  dt-bindings: crypto: k3: Add sa2ul bindings documentation
  crypto: sa2ul: Add crypto driver
  crypto: sa2ul: Add AES ECB Mode support
  crypto: sa2ul: Add aead support for hmac(sha1)cbc(aes) algorithm
  crypto: sha256_generic: Export the Transform function
  crypto: sa2ul: Add hmac(sha256)cbc(aes) AEAD Algo support
  crypto: sa2ul: Add hmac(sha1) HMAC algorithm support
  crypto: sa2ul: Add hmac(sha256) HMAC algorithm support
  sa2ul: Add 3DES ECB & CBC Mode support
  arm64: dts: k3-am6: Add crypto accelarator node

 .../devicetree/bindings/crypto/sa2ul.txt      |   47 +
 arch/arm64/boot/dts/ti/k3-am65-main.dtsi      |   33 +
 crypto/sha256_generic.c                       |    3 +-
 drivers/crypto/Kconfig                        |   17 +
 drivers/crypto/Makefile                       |    1 +
 drivers/crypto/sa2ul.c                        | 2232 +++++++++++++++++
 drivers/crypto/sa2ul.h                        |  384 +++
 include/crypto/sha.h                          |    1 +
 8 files changed, 2717 insertions(+), 1 deletion(-)
 create mode 100644 Documentation/devicetree/bindings/crypto/sa2ul.txt
 create mode 100644 drivers/crypto/sa2ul.c
 create mode 100644 drivers/crypto/sa2ul.h

-- 
2.17.1

WARNING: multiple messages have this Message-ID (diff)
From: Keerthy <j-keerthy@ti.com>
To: <herbert@gondor.apana.org.au>, <davem@davemloft.net>,
	<robh+dt@kernel.org>
Cc: nm@ti.com, devicetree@vger.kernel.org, j-keerthy@ti.com,
	linux-kernel@vger.kernel.org, t-kristo@ti.com,
	linux-arm-kernel@lists.infradead.org
Subject: [PATCH 00/10] crypto: k3: Add sa2ul driver
Date: Tue, 18 Jun 2019 17:38:33 +0530	[thread overview]
Message-ID: <20190618120843.18777-1-j-keerthy@ti.com> (raw)

The series adds Crypto hardware accelerator support for SA2UL.
SA2UL stands for security accelerator ultra lite.

The Security Accelerator (SA2_UL) subsystem provides hardware
cryptographic acceleration for the following use cases:
• Encryption and authentication for secure boot
• Encryption and authentication of content in applications
  requiring DRM (digital rights management) and
  content/asset protection
The device includes one instantiation of SA2_UL named SA2_UL0

SA2UL needs on tx channel and a pair of rx dma channels.

This series has dependency on UDMA series. Hence is based on top of:

https://patchwork.kernel.org/project/linux-dmaengine/list/?series=114105

The above series adds couple of dmaengine APIs that are used
by the sa2ul driver. Hence there is a hard dependency on the
above series.

Keerthy (10):
  dt-bindings: crypto: k3: Add sa2ul bindings documentation
  crypto: sa2ul: Add crypto driver
  crypto: sa2ul: Add AES ECB Mode support
  crypto: sa2ul: Add aead support for hmac(sha1)cbc(aes) algorithm
  crypto: sha256_generic: Export the Transform function
  crypto: sa2ul: Add hmac(sha256)cbc(aes) AEAD Algo support
  crypto: sa2ul: Add hmac(sha1) HMAC algorithm support
  crypto: sa2ul: Add hmac(sha256) HMAC algorithm support
  sa2ul: Add 3DES ECB & CBC Mode support
  arm64: dts: k3-am6: Add crypto accelarator node

 .../devicetree/bindings/crypto/sa2ul.txt      |   47 +
 arch/arm64/boot/dts/ti/k3-am65-main.dtsi      |   33 +
 crypto/sha256_generic.c                       |    3 +-
 drivers/crypto/Kconfig                        |   17 +
 drivers/crypto/Makefile                       |    1 +
 drivers/crypto/sa2ul.c                        | 2232 +++++++++++++++++
 drivers/crypto/sa2ul.h                        |  384 +++
 include/crypto/sha.h                          |    1 +
 8 files changed, 2717 insertions(+), 1 deletion(-)
 create mode 100644 Documentation/devicetree/bindings/crypto/sa2ul.txt
 create mode 100644 drivers/crypto/sa2ul.c
 create mode 100644 drivers/crypto/sa2ul.h

-- 
2.17.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

             reply	other threads:[~2019-06-18 12:08 UTC|newest]

Thread overview: 38+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-06-18 12:08 Keerthy [this message]
2019-06-18 12:08 ` [PATCH 00/10] crypto: k3: Add sa2ul driver Keerthy
2019-06-18 12:08 ` Keerthy
2019-06-18 12:08 ` [PATCH 01/10] dt-bindings: crypto: k3: Add sa2ul bindings documentation Keerthy
2019-06-18 12:08   ` Keerthy
2019-06-18 12:08   ` Keerthy
2019-06-18 12:08 ` [PATCH 02/10] crypto: sa2ul: Add crypto driver Keerthy
2019-06-18 12:08   ` Keerthy
2019-06-18 12:08   ` Keerthy
2019-06-18 12:08 ` [PATCH 03/10] crypto: sa2ul: Add AES ECB Mode support Keerthy
2019-06-18 12:08   ` Keerthy
2019-06-18 12:08   ` Keerthy
2019-06-18 12:08 ` [PATCH 04/10] crypto: sa2ul: Add aead support for hmac(sha1)cbc(aes) algorithm Keerthy
2019-06-18 12:08   ` Keerthy
2019-06-18 12:08   ` Keerthy
2019-06-18 12:08 ` [PATCH 05/10] crypto: sha256_generic: Export the Transform function Keerthy
2019-06-18 12:08   ` Keerthy
2019-06-18 12:08   ` Keerthy
2019-06-18 12:08 ` [PATCH 06/10] crypto: sa2ul: Add hmac(sha256)cbc(aes) AEAD Algo support Keerthy
2019-06-18 12:08   ` Keerthy
2019-06-18 12:08   ` Keerthy
2019-06-18 12:08 ` [PATCH 07/10] crypto: sa2ul: Add hmac(sha1) HMAC algorithm support Keerthy
2019-06-18 12:08   ` Keerthy
2019-06-18 12:08   ` Keerthy
2019-06-18 12:08 ` [PATCH 08/10] crypto: sa2ul: Add hmac(sha256) " Keerthy
2019-06-18 12:08   ` Keerthy
2019-06-18 12:08   ` Keerthy
2019-06-18 12:08 ` [PATCH 09/10] sa2ul: Add 3DES ECB & CBC Mode support Keerthy
2019-06-18 12:08   ` Keerthy
2019-06-18 12:08   ` Keerthy
2019-06-18 12:08 ` [PATCH 10/10] arm64: dts: k3-am6: Add crypto accelarator node Keerthy
2019-06-18 12:08   ` Keerthy
2019-06-18 12:08   ` Keerthy
2019-06-28  4:19 ` [PATCH 00/10] crypto: k3: Add sa2ul driver Herbert Xu
2019-06-28  4:19   ` Herbert Xu
2019-06-28  4:21   ` Keerthy
2019-06-28  4:21     ` Keerthy
2019-06-28  4:21     ` Keerthy

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190618120843.18777-1-j-keerthy@ti.com \
    --to=j-keerthy@ti.com \
    --cc=davem@davemloft.net \
    --cc=devicetree@vger.kernel.org \
    --cc=herbert@gondor.apana.org.au \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=nm@ti.com \
    --cc=robh+dt@kernel.org \
    --cc=t-kristo@ti.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.