From: Keerthy <j-keerthy@ti.com>
To: <herbert@gondor.apana.org.au>, <davem@davemloft.net>,
<robh+dt@kernel.org>
Cc: <linux-kernel@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>,
<devicetree@vger.kernel.org>, <t-kristo@ti.com>,
<j-keerthy@ti.com>, <nm@ti.com>
Subject: [PATCH 09/10] sa2ul: Add 3DES ECB & CBC Mode support
Date: Tue, 18 Jun 2019 17:38:42 +0530 [thread overview]
Message-ID: <20190618120843.18777-10-j-keerthy@ti.com> (raw)
In-Reply-To: <20190618120843.18777-1-j-keerthy@ti.com>
Triple DES (3DES), officially the Triple Data Encryption Algorithm
(TDEA or Triple DEA), is a symmetric-key block cipher, which applies
the DES cipher algorithm three times to each data block
Add 3DES ECB(Electronic code book) & CBC(Cipher Block Chaining)
Mode support.
Signed-off-by: Keerthy <j-keerthy@ti.com>
---
drivers/crypto/sa2ul.c | 112 +++++++++++++++++++++++++++++++++++++++++
1 file changed, 112 insertions(+)
diff --git a/drivers/crypto/sa2ul.c b/drivers/crypto/sa2ul.c
index 74211cd21c62..8d535fc9867f 100644
--- a/drivers/crypto/sa2ul.c
+++ b/drivers/crypto/sa2ul.c
@@ -210,6 +210,35 @@ static u8 mci_ecb_dec_array[3][27] = {
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 },
};
+/*
+ * Mode Control Instructions for DES algorithm
+ * For CBC (Cipher Block Chaining) mode and ECB mode
+ * encryption and for decryption respectively
+ */
+static u8 mci_cbc_3des_enc_array[MODE_CONTROL_BYTES] = {
+ 0x20, 0x00, 0x00, 0x18, 0x88, 0x52, 0xaa, 0x4b, 0x7e, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00,
+};
+
+static u8 mci_cbc_3des_dec_array[MODE_CONTROL_BYTES] = {
+ 0x30, 0x00, 0x00, 0x85, 0x0a, 0xca, 0x98, 0xf4, 0x40, 0xc0, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00,
+};
+
+static u8 mci_ecb_3des_enc_array[MODE_CONTROL_BYTES] = {
+ 0x20, 0x00, 0x00, 0x85, 0x0a, 0x04, 0xb7, 0x90, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00,
+};
+
+static u8 mci_ecb_3des_dec_array[MODE_CONTROL_BYTES] = {
+ 0x30, 0x00, 0x00, 0x85, 0x0a, 0x04, 0xb7, 0x90, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00,
+};
+
/*
* Perform 16 byte or 128 bit swizzling
* The SA2UL Expects the security context to
@@ -877,6 +906,39 @@ static int sa_aes_ecb_setkey(struct crypto_ablkcipher *tfm, const u8 *key,
return sa_aes_setkey(tfm, key, keylen, ad);
}
+static int sa_3des_cbc_setkey(struct crypto_ablkcipher *tfm, const u8 *key,
+ unsigned int keylen)
+{
+ struct algo_data *ad = kzalloc(sizeof(*ad), GFP_KERNEL);
+
+ ad->enc_eng.eng_id = SA_ENG_ID_EM1;
+ ad->enc_eng.sc_size = SA_CTX_ENC_TYPE1_SZ;
+ ad->auth_eng.eng_id = SA_ENG_ID_NONE;
+ ad->auth_eng.sc_size = 0;
+ ad->mci_enc = mci_cbc_3des_enc_array;
+ ad->mci_dec = mci_cbc_3des_dec_array;
+ ad->ealg_id = SA_EALG_ID_3DES_CBC;
+ ad->aalg_id = SA_AALG_ID_NONE;
+
+ return sa_aes_setkey(tfm, key, keylen, ad);
+}
+
+static int sa_3des_ecb_setkey(struct crypto_ablkcipher *tfm, const u8 *key,
+ unsigned int keylen)
+{
+ struct algo_data *ad = kzalloc(sizeof(*ad), GFP_KERNEL);
+
+ ad->enc_eng.eng_id = SA_ENG_ID_EM1;
+ ad->enc_eng.sc_size = SA_CTX_ENC_TYPE1_SZ;
+ ad->auth_eng.eng_id = SA_ENG_ID_NONE;
+ ad->auth_eng.sc_size = 0;
+ ad->mci_enc = mci_ecb_3des_enc_array;
+ ad->mci_dec = mci_ecb_3des_dec_array;
+ ad->aalg_id = SA_AALG_ID_NONE;
+
+ return sa_aes_setkey(tfm, key, keylen, ad);
+}
+
static void sa_aes_dma_in_callback(void *data)
{
struct sa_rx_data *rxd = (struct sa_rx_data *)data;
@@ -1787,6 +1849,56 @@ static struct sa_alg_tmpl sa_algs[] = {
}
}
},
+ { .type = CRYPTO_ALG_TYPE_ABLKCIPHER,
+ .alg.crypto = {
+ .cra_name = "cbc(des3_ede)",
+ .cra_driver_name = "cbc-des3-sa2ul",
+ .cra_priority = 30000,
+ .cra_flags = CRYPTO_ALG_TYPE_ABLKCIPHER |
+ CRYPTO_ALG_KERN_DRIVER_ONLY |
+ CRYPTO_ALG_ASYNC | CRYPTO_ALG_NEED_FALLBACK,
+ .cra_blocksize = DES_BLOCK_SIZE,
+ .cra_ctxsize = sizeof(struct sa_tfm_ctx),
+ .cra_alignmask = 0,
+ .cra_type = &crypto_ablkcipher_type,
+ .cra_module = THIS_MODULE,
+ .cra_init = sa_aes_cra_init,
+ .cra_exit = sa_aes_cra_exit,
+ .cra_u.ablkcipher = {
+ .min_keysize = 3 * DES_KEY_SIZE,
+ .max_keysize = 3 * DES_KEY_SIZE,
+ .ivsize = DES_BLOCK_SIZE,
+ .setkey = sa_3des_cbc_setkey,
+ .encrypt = sa_aes_cbc_encrypt,
+ .decrypt = sa_aes_cbc_decrypt,
+ }
+ }
+ },
+ { .type = CRYPTO_ALG_TYPE_ABLKCIPHER,
+ .alg.crypto = {
+ .cra_name = "ecb(des3_ede)",
+ .cra_driver_name = "ecb-des3-sa2ul",
+ .cra_priority = 30000,
+ .cra_flags = CRYPTO_ALG_TYPE_ABLKCIPHER |
+ CRYPTO_ALG_KERN_DRIVER_ONLY |
+ CRYPTO_ALG_ASYNC | CRYPTO_ALG_NEED_FALLBACK,
+ .cra_blocksize = DES_BLOCK_SIZE,
+ .cra_ctxsize = sizeof(struct sa_tfm_ctx),
+ .cra_alignmask = 0,
+ .cra_type = &crypto_ablkcipher_type,
+ .cra_module = THIS_MODULE,
+ .cra_init = sa_aes_cra_init,
+ .cra_exit = sa_aes_cra_exit,
+ .cra_u.ablkcipher = {
+ .min_keysize = 3 * DES_KEY_SIZE,
+ .max_keysize = 3 * DES_KEY_SIZE,
+ .ivsize = DES_BLOCK_SIZE,
+ .setkey = sa_3des_ecb_setkey,
+ .encrypt = sa_aes_cbc_encrypt,
+ .decrypt = sa_aes_cbc_decrypt,
+ }
+ }
+ },
/* AEAD algorithms */
{.type = CRYPTO_ALG_TYPE_AEAD,
.alg.aead = {
--
2.17.1
WARNING: multiple messages have this Message-ID (diff)
From: Keerthy <j-keerthy@ti.com>
To: herbert@gondor.apana.org.au, davem@davemloft.net, robh+dt@kernel.org
Cc: linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org,
t-kristo@ti.com, j-keerthy@ti.com, nm@ti.com
Subject: [PATCH 09/10] sa2ul: Add 3DES ECB & CBC Mode support
Date: Tue, 18 Jun 2019 17:38:42 +0530 [thread overview]
Message-ID: <20190618120843.18777-10-j-keerthy@ti.com> (raw)
In-Reply-To: <20190618120843.18777-1-j-keerthy@ti.com>
Triple DES (3DES), officially the Triple Data Encryption Algorithm
(TDEA or Triple DEA), is a symmetric-key block cipher, which applies
the DES cipher algorithm three times to each data block
Add 3DES ECB(Electronic code book) & CBC(Cipher Block Chaining)
Mode support.
Signed-off-by: Keerthy <j-keerthy@ti.com>
---
drivers/crypto/sa2ul.c | 112 +++++++++++++++++++++++++++++++++++++++++
1 file changed, 112 insertions(+)
diff --git a/drivers/crypto/sa2ul.c b/drivers/crypto/sa2ul.c
index 74211cd21c62..8d535fc9867f 100644
--- a/drivers/crypto/sa2ul.c
+++ b/drivers/crypto/sa2ul.c
@@ -210,6 +210,35 @@ static u8 mci_ecb_dec_array[3][27] = {
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 },
};
+/*
+ * Mode Control Instructions for DES algorithm
+ * For CBC (Cipher Block Chaining) mode and ECB mode
+ * encryption and for decryption respectively
+ */
+static u8 mci_cbc_3des_enc_array[MODE_CONTROL_BYTES] = {
+ 0x20, 0x00, 0x00, 0x18, 0x88, 0x52, 0xaa, 0x4b, 0x7e, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00,
+};
+
+static u8 mci_cbc_3des_dec_array[MODE_CONTROL_BYTES] = {
+ 0x30, 0x00, 0x00, 0x85, 0x0a, 0xca, 0x98, 0xf4, 0x40, 0xc0, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00,
+};
+
+static u8 mci_ecb_3des_enc_array[MODE_CONTROL_BYTES] = {
+ 0x20, 0x00, 0x00, 0x85, 0x0a, 0x04, 0xb7, 0x90, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00,
+};
+
+static u8 mci_ecb_3des_dec_array[MODE_CONTROL_BYTES] = {
+ 0x30, 0x00, 0x00, 0x85, 0x0a, 0x04, 0xb7, 0x90, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00,
+};
+
/*
* Perform 16 byte or 128 bit swizzling
* The SA2UL Expects the security context to
@@ -877,6 +906,39 @@ static int sa_aes_ecb_setkey(struct crypto_ablkcipher *tfm, const u8 *key,
return sa_aes_setkey(tfm, key, keylen, ad);
}
+static int sa_3des_cbc_setkey(struct crypto_ablkcipher *tfm, const u8 *key,
+ unsigned int keylen)
+{
+ struct algo_data *ad = kzalloc(sizeof(*ad), GFP_KERNEL);
+
+ ad->enc_eng.eng_id = SA_ENG_ID_EM1;
+ ad->enc_eng.sc_size = SA_CTX_ENC_TYPE1_SZ;
+ ad->auth_eng.eng_id = SA_ENG_ID_NONE;
+ ad->auth_eng.sc_size = 0;
+ ad->mci_enc = mci_cbc_3des_enc_array;
+ ad->mci_dec = mci_cbc_3des_dec_array;
+ ad->ealg_id = SA_EALG_ID_3DES_CBC;
+ ad->aalg_id = SA_AALG_ID_NONE;
+
+ return sa_aes_setkey(tfm, key, keylen, ad);
+}
+
+static int sa_3des_ecb_setkey(struct crypto_ablkcipher *tfm, const u8 *key,
+ unsigned int keylen)
+{
+ struct algo_data *ad = kzalloc(sizeof(*ad), GFP_KERNEL);
+
+ ad->enc_eng.eng_id = SA_ENG_ID_EM1;
+ ad->enc_eng.sc_size = SA_CTX_ENC_TYPE1_SZ;
+ ad->auth_eng.eng_id = SA_ENG_ID_NONE;
+ ad->auth_eng.sc_size = 0;
+ ad->mci_enc = mci_ecb_3des_enc_array;
+ ad->mci_dec = mci_ecb_3des_dec_array;
+ ad->aalg_id = SA_AALG_ID_NONE;
+
+ return sa_aes_setkey(tfm, key, keylen, ad);
+}
+
static void sa_aes_dma_in_callback(void *data)
{
struct sa_rx_data *rxd = (struct sa_rx_data *)data;
@@ -1787,6 +1849,56 @@ static struct sa_alg_tmpl sa_algs[] = {
}
}
},
+ { .type = CRYPTO_ALG_TYPE_ABLKCIPHER,
+ .alg.crypto = {
+ .cra_name = "cbc(des3_ede)",
+ .cra_driver_name = "cbc-des3-sa2ul",
+ .cra_priority = 30000,
+ .cra_flags = CRYPTO_ALG_TYPE_ABLKCIPHER |
+ CRYPTO_ALG_KERN_DRIVER_ONLY |
+ CRYPTO_ALG_ASYNC | CRYPTO_ALG_NEED_FALLBACK,
+ .cra_blocksize = DES_BLOCK_SIZE,
+ .cra_ctxsize = sizeof(struct sa_tfm_ctx),
+ .cra_alignmask = 0,
+ .cra_type = &crypto_ablkcipher_type,
+ .cra_module = THIS_MODULE,
+ .cra_init = sa_aes_cra_init,
+ .cra_exit = sa_aes_cra_exit,
+ .cra_u.ablkcipher = {
+ .min_keysize = 3 * DES_KEY_SIZE,
+ .max_keysize = 3 * DES_KEY_SIZE,
+ .ivsize = DES_BLOCK_SIZE,
+ .setkey = sa_3des_cbc_setkey,
+ .encrypt = sa_aes_cbc_encrypt,
+ .decrypt = sa_aes_cbc_decrypt,
+ }
+ }
+ },
+ { .type = CRYPTO_ALG_TYPE_ABLKCIPHER,
+ .alg.crypto = {
+ .cra_name = "ecb(des3_ede)",
+ .cra_driver_name = "ecb-des3-sa2ul",
+ .cra_priority = 30000,
+ .cra_flags = CRYPTO_ALG_TYPE_ABLKCIPHER |
+ CRYPTO_ALG_KERN_DRIVER_ONLY |
+ CRYPTO_ALG_ASYNC | CRYPTO_ALG_NEED_FALLBACK,
+ .cra_blocksize = DES_BLOCK_SIZE,
+ .cra_ctxsize = sizeof(struct sa_tfm_ctx),
+ .cra_alignmask = 0,
+ .cra_type = &crypto_ablkcipher_type,
+ .cra_module = THIS_MODULE,
+ .cra_init = sa_aes_cra_init,
+ .cra_exit = sa_aes_cra_exit,
+ .cra_u.ablkcipher = {
+ .min_keysize = 3 * DES_KEY_SIZE,
+ .max_keysize = 3 * DES_KEY_SIZE,
+ .ivsize = DES_BLOCK_SIZE,
+ .setkey = sa_3des_ecb_setkey,
+ .encrypt = sa_aes_cbc_encrypt,
+ .decrypt = sa_aes_cbc_decrypt,
+ }
+ }
+ },
/* AEAD algorithms */
{.type = CRYPTO_ALG_TYPE_AEAD,
.alg.aead = {
--
2.17.1
WARNING: multiple messages have this Message-ID (diff)
From: Keerthy <j-keerthy@ti.com>
To: <herbert@gondor.apana.org.au>, <davem@davemloft.net>,
<robh+dt@kernel.org>
Cc: nm@ti.com, devicetree@vger.kernel.org, j-keerthy@ti.com,
linux-kernel@vger.kernel.org, t-kristo@ti.com,
linux-arm-kernel@lists.infradead.org
Subject: [PATCH 09/10] sa2ul: Add 3DES ECB & CBC Mode support
Date: Tue, 18 Jun 2019 17:38:42 +0530 [thread overview]
Message-ID: <20190618120843.18777-10-j-keerthy@ti.com> (raw)
In-Reply-To: <20190618120843.18777-1-j-keerthy@ti.com>
Triple DES (3DES), officially the Triple Data Encryption Algorithm
(TDEA or Triple DEA), is a symmetric-key block cipher, which applies
the DES cipher algorithm three times to each data block
Add 3DES ECB(Electronic code book) & CBC(Cipher Block Chaining)
Mode support.
Signed-off-by: Keerthy <j-keerthy@ti.com>
---
drivers/crypto/sa2ul.c | 112 +++++++++++++++++++++++++++++++++++++++++
1 file changed, 112 insertions(+)
diff --git a/drivers/crypto/sa2ul.c b/drivers/crypto/sa2ul.c
index 74211cd21c62..8d535fc9867f 100644
--- a/drivers/crypto/sa2ul.c
+++ b/drivers/crypto/sa2ul.c
@@ -210,6 +210,35 @@ static u8 mci_ecb_dec_array[3][27] = {
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 },
};
+/*
+ * Mode Control Instructions for DES algorithm
+ * For CBC (Cipher Block Chaining) mode and ECB mode
+ * encryption and for decryption respectively
+ */
+static u8 mci_cbc_3des_enc_array[MODE_CONTROL_BYTES] = {
+ 0x20, 0x00, 0x00, 0x18, 0x88, 0x52, 0xaa, 0x4b, 0x7e, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00,
+};
+
+static u8 mci_cbc_3des_dec_array[MODE_CONTROL_BYTES] = {
+ 0x30, 0x00, 0x00, 0x85, 0x0a, 0xca, 0x98, 0xf4, 0x40, 0xc0, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00,
+};
+
+static u8 mci_ecb_3des_enc_array[MODE_CONTROL_BYTES] = {
+ 0x20, 0x00, 0x00, 0x85, 0x0a, 0x04, 0xb7, 0x90, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00,
+};
+
+static u8 mci_ecb_3des_dec_array[MODE_CONTROL_BYTES] = {
+ 0x30, 0x00, 0x00, 0x85, 0x0a, 0x04, 0xb7, 0x90, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00,
+};
+
/*
* Perform 16 byte or 128 bit swizzling
* The SA2UL Expects the security context to
@@ -877,6 +906,39 @@ static int sa_aes_ecb_setkey(struct crypto_ablkcipher *tfm, const u8 *key,
return sa_aes_setkey(tfm, key, keylen, ad);
}
+static int sa_3des_cbc_setkey(struct crypto_ablkcipher *tfm, const u8 *key,
+ unsigned int keylen)
+{
+ struct algo_data *ad = kzalloc(sizeof(*ad), GFP_KERNEL);
+
+ ad->enc_eng.eng_id = SA_ENG_ID_EM1;
+ ad->enc_eng.sc_size = SA_CTX_ENC_TYPE1_SZ;
+ ad->auth_eng.eng_id = SA_ENG_ID_NONE;
+ ad->auth_eng.sc_size = 0;
+ ad->mci_enc = mci_cbc_3des_enc_array;
+ ad->mci_dec = mci_cbc_3des_dec_array;
+ ad->ealg_id = SA_EALG_ID_3DES_CBC;
+ ad->aalg_id = SA_AALG_ID_NONE;
+
+ return sa_aes_setkey(tfm, key, keylen, ad);
+}
+
+static int sa_3des_ecb_setkey(struct crypto_ablkcipher *tfm, const u8 *key,
+ unsigned int keylen)
+{
+ struct algo_data *ad = kzalloc(sizeof(*ad), GFP_KERNEL);
+
+ ad->enc_eng.eng_id = SA_ENG_ID_EM1;
+ ad->enc_eng.sc_size = SA_CTX_ENC_TYPE1_SZ;
+ ad->auth_eng.eng_id = SA_ENG_ID_NONE;
+ ad->auth_eng.sc_size = 0;
+ ad->mci_enc = mci_ecb_3des_enc_array;
+ ad->mci_dec = mci_ecb_3des_dec_array;
+ ad->aalg_id = SA_AALG_ID_NONE;
+
+ return sa_aes_setkey(tfm, key, keylen, ad);
+}
+
static void sa_aes_dma_in_callback(void *data)
{
struct sa_rx_data *rxd = (struct sa_rx_data *)data;
@@ -1787,6 +1849,56 @@ static struct sa_alg_tmpl sa_algs[] = {
}
}
},
+ { .type = CRYPTO_ALG_TYPE_ABLKCIPHER,
+ .alg.crypto = {
+ .cra_name = "cbc(des3_ede)",
+ .cra_driver_name = "cbc-des3-sa2ul",
+ .cra_priority = 30000,
+ .cra_flags = CRYPTO_ALG_TYPE_ABLKCIPHER |
+ CRYPTO_ALG_KERN_DRIVER_ONLY |
+ CRYPTO_ALG_ASYNC | CRYPTO_ALG_NEED_FALLBACK,
+ .cra_blocksize = DES_BLOCK_SIZE,
+ .cra_ctxsize = sizeof(struct sa_tfm_ctx),
+ .cra_alignmask = 0,
+ .cra_type = &crypto_ablkcipher_type,
+ .cra_module = THIS_MODULE,
+ .cra_init = sa_aes_cra_init,
+ .cra_exit = sa_aes_cra_exit,
+ .cra_u.ablkcipher = {
+ .min_keysize = 3 * DES_KEY_SIZE,
+ .max_keysize = 3 * DES_KEY_SIZE,
+ .ivsize = DES_BLOCK_SIZE,
+ .setkey = sa_3des_cbc_setkey,
+ .encrypt = sa_aes_cbc_encrypt,
+ .decrypt = sa_aes_cbc_decrypt,
+ }
+ }
+ },
+ { .type = CRYPTO_ALG_TYPE_ABLKCIPHER,
+ .alg.crypto = {
+ .cra_name = "ecb(des3_ede)",
+ .cra_driver_name = "ecb-des3-sa2ul",
+ .cra_priority = 30000,
+ .cra_flags = CRYPTO_ALG_TYPE_ABLKCIPHER |
+ CRYPTO_ALG_KERN_DRIVER_ONLY |
+ CRYPTO_ALG_ASYNC | CRYPTO_ALG_NEED_FALLBACK,
+ .cra_blocksize = DES_BLOCK_SIZE,
+ .cra_ctxsize = sizeof(struct sa_tfm_ctx),
+ .cra_alignmask = 0,
+ .cra_type = &crypto_ablkcipher_type,
+ .cra_module = THIS_MODULE,
+ .cra_init = sa_aes_cra_init,
+ .cra_exit = sa_aes_cra_exit,
+ .cra_u.ablkcipher = {
+ .min_keysize = 3 * DES_KEY_SIZE,
+ .max_keysize = 3 * DES_KEY_SIZE,
+ .ivsize = DES_BLOCK_SIZE,
+ .setkey = sa_3des_ecb_setkey,
+ .encrypt = sa_aes_cbc_encrypt,
+ .decrypt = sa_aes_cbc_decrypt,
+ }
+ }
+ },
/* AEAD algorithms */
{.type = CRYPTO_ALG_TYPE_AEAD,
.alg.aead = {
--
2.17.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2019-06-18 12:08 UTC|newest]
Thread overview: 38+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-06-18 12:08 [PATCH 00/10] crypto: k3: Add sa2ul driver Keerthy
2019-06-18 12:08 ` Keerthy
2019-06-18 12:08 ` Keerthy
2019-06-18 12:08 ` [PATCH 01/10] dt-bindings: crypto: k3: Add sa2ul bindings documentation Keerthy
2019-06-18 12:08 ` Keerthy
2019-06-18 12:08 ` Keerthy
2019-06-18 12:08 ` [PATCH 02/10] crypto: sa2ul: Add crypto driver Keerthy
2019-06-18 12:08 ` Keerthy
2019-06-18 12:08 ` Keerthy
2019-06-18 12:08 ` [PATCH 03/10] crypto: sa2ul: Add AES ECB Mode support Keerthy
2019-06-18 12:08 ` Keerthy
2019-06-18 12:08 ` Keerthy
2019-06-18 12:08 ` [PATCH 04/10] crypto: sa2ul: Add aead support for hmac(sha1)cbc(aes) algorithm Keerthy
2019-06-18 12:08 ` Keerthy
2019-06-18 12:08 ` Keerthy
2019-06-18 12:08 ` [PATCH 05/10] crypto: sha256_generic: Export the Transform function Keerthy
2019-06-18 12:08 ` Keerthy
2019-06-18 12:08 ` Keerthy
2019-06-18 12:08 ` [PATCH 06/10] crypto: sa2ul: Add hmac(sha256)cbc(aes) AEAD Algo support Keerthy
2019-06-18 12:08 ` Keerthy
2019-06-18 12:08 ` Keerthy
2019-06-18 12:08 ` [PATCH 07/10] crypto: sa2ul: Add hmac(sha1) HMAC algorithm support Keerthy
2019-06-18 12:08 ` Keerthy
2019-06-18 12:08 ` Keerthy
2019-06-18 12:08 ` [PATCH 08/10] crypto: sa2ul: Add hmac(sha256) " Keerthy
2019-06-18 12:08 ` Keerthy
2019-06-18 12:08 ` Keerthy
2019-06-18 12:08 ` Keerthy [this message]
2019-06-18 12:08 ` [PATCH 09/10] sa2ul: Add 3DES ECB & CBC Mode support Keerthy
2019-06-18 12:08 ` Keerthy
2019-06-18 12:08 ` [PATCH 10/10] arm64: dts: k3-am6: Add crypto accelarator node Keerthy
2019-06-18 12:08 ` Keerthy
2019-06-18 12:08 ` Keerthy
2019-06-28 4:19 ` [PATCH 00/10] crypto: k3: Add sa2ul driver Herbert Xu
2019-06-28 4:19 ` Herbert Xu
2019-06-28 4:21 ` Keerthy
2019-06-28 4:21 ` Keerthy
2019-06-28 4:21 ` Keerthy
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190618120843.18777-10-j-keerthy@ti.com \
--to=j-keerthy@ti.com \
--cc=davem@davemloft.net \
--cc=devicetree@vger.kernel.org \
--cc=herbert@gondor.apana.org.au \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=nm@ti.com \
--cc=robh+dt@kernel.org \
--cc=t-kristo@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.